Quantification of the least limiting water range in an oxisol using two methodological strategies

The least limiting water range (LLWR) has been used as an indicator of soil physical quality as it represents, in a single parameter, the soil physical properties directly linked to plant growth, with the exception of temperature. The usual procedure for obtaining the LLWR involves determination of the water retention curve (WRC) and the soil resistance to penetration curve (SRC) in soil samples with undisturbed structure in the laboratory. Determination of the WRC and SRC using field measurements (in situ ) is preferable, but requires appropriate instrumentation. The objective of this study was to determine the LLWR from the data collected for determination of WRC and SRC in situ using portable electronic instruments, and to compare those determinations with the ones made in the laboratory. Samples were taken from the 0.0-0.1 m layer of a Latossolo Vermelho distrófico (Oxisol). Two methods were used for quantification of the LLWR: the traditional, with measurements made in soil samples with undisturbed structure; and in situ , with measurements of water content (θ), soil water potential (Ψ), and soil resistance to penetration (SR) through the use of sensors. The in situ measurements of θ, Ψ and SR were taken over a period of four days of soil drying. At the same time, samples with undisturbed structure were collected for determination of bulk density (BD). Due to the limitations of measurement of Ψ by tensiometer, additional determinations of θ were made with a psychrometer (in the laboratory) at the Ψ of -1500 kPa. The results show that it is possible to determine the LLWR by the θ, Ψ and SR measurements using the suggested approach and instrumentation. The quality of fit of the SRC was similar in both strategies. In contrast, the θ and Ψ in situ measurements, associated with those measured with a psychrometer, produced a better WRC description. The estimates of the LLWR were similar in both methodological strategies. The quantification of LLWR in situ can be achieved in 10 % of the time required for the traditional method.

Budgeting rockfall and modeling sedimentary delivery in torrent systems

This thesis is a compilation of projects to study sediment processes recharging debris flow channels. These works, conducted during my stay at the University of Lausanne, focus in the geological and morphological implications of torrent catchments to characterize debris supply, a fundamental element to predict debris flows. Other aspects of sediment dynamics are considered, e.g. the coupling headwaters - torrent, as well as the development of a modeling software that simulates sediment transfer in torrent systems. The sediment activity at Manival, an active torrent system of the northern French Alps, was investigated using terrestrial laser scanning and supplemented with geostructural investigations and a survey of sediment transferred in the main torrent. A full year of sediment flux could be observed, which coincided with two debris flows and several bedload transport events. This study revealed that both debris flows generated in the torrent and were preceded in time by recharge of material from the headwaters. Debris production occurred mostly during winter - early spring time and was caused by large slope failures. Sediment transfers were more puzzling, occurring almost exclusively in early spring subordinated to runoffconditions and in autumn during long rainfall. Intense rainstorms in summer did not affect debris storage that seems to rely on the stability of debris deposits. The morpho-geological implication in debris supply was evaluated using DEM and field surveys. A slope angle-based classification of topography could characterize the mode of debris production and transfer. A slope stability analysis derived from the structures in rock mass could assess susceptibility to failure. The modeled rockfall source areas included more than 97% of the recorded events and the sediment budgets appeared to be correlated to the density of potential slope failure. This work showed that the analysis of process-related terrain morphology and of susceptibility to slope failure document the sediment dynamics to quantitatively assess erosion zones leading to debris flow activity. The development of erosional landforms was evaluated by analyzing their geometry with the orientations of potential rock slope failure and with the direction of the maximum joint frequency. Structure in rock mass, but in particular wedge failure and the dominant discontinuities, appear as a first-order control of erosional mechanisms affecting bedrock- dominated catchment. They represent some weaknesses that are exploited primarily by mass wasting processes and erosion, promoting not only the initiation of rock couloirs and gullies, but also their propagation. Incorporating the geological control in geomorphic processes contributes to better understand the landscape evolution of active catchments. A sediment flux algorithm was implemented in a sediment cascade model that discretizes the torrent catchment in channel reaches and individual process-response systems. Each conceptual element includes in simple manner geomorphological and sediment flux information derived from GIS complemented with field mapping. This tool enables to simulate sediment transfers in channels considering evolving debris supply and conveyance, and helps reducing the uncertainty inherent to sediment budget prediction in torrent systems. Cette thèse est un recueil de projets d'études des processus de recharges sédimentaires des chenaux torrentiels. Ces travaux, réalisés lorsque j'étais employé à l'Université de Lausanne, se concentrent sur les implications géologiques et morphologiques des bassins dans l'apport de sédiments, élément fondamental dans la prédiction de laves torrentielles. D'autres aspects de dynamique sédimentaire ont été abordés, p. ex. le couplage torrent - bassin, ainsi qu'un modèle de simulation du transfert sédimentaire en milieu torrentiel. L'activité sédimentaire du Manival, un système torrentiel actif des Alpes françaises, a été étudiée par relevés au laser scanner terrestre et complétée par une étude géostructurale ainsi qu'un suivi du transfert en sédiments du torrent. Une année de flux sédimentaire a pu être observée, coïncidant avec deux laves torrentielles et plusieurs phénomènes de charriages. Cette étude a révélé que les laves s'étaient générées dans le torrent et étaient précédées par une recharge de débris depuis les versants. La production de débris s'est passée principalement en l'hiver - début du printemps, causée par de grandes ruptures de pentes. Le transfert était plus étrange, se produisant presque exclusivement au début du printemps subordonné aux conditions d'écoulement et en automne lors de longues pluies. Les orages d'été n'affectèrent guère les dépôts, qui semblent dépendre de leur stabilité. Les implications morpho-géologiques dans l'apport sédimentaire ont été évaluées à l'aide de MNT et études de terrain. Une classification de la topographie basée sur la pente a permis de charactériser le mode de production et transfert. Une analyse de stabilité de pente à partir des structures de roches a permis d'estimer la susceptibilité à la rupture. Les zones sources modélisées comprennent plus de 97% des chutes de blocs observées et les bilans sédimentaires sont corrélés à la densité de ruptures potentielles. Ce travail d'analyses des morphologies du terrain et de susceptibilité à la rupture documente la dynamique sédimentaire pour l'estimation quantitative des zones érosives induisant l'activité torrentielle. Le développement des formes d'érosion a été évalué par l'analyse de leur géométrie avec celle des ruptures potentielles et avec la direction de la fréquence maximale des joints. Les structures de roches, mais en particulier les dièdres et les discontinuités dominantes, semblent être très influents dans les mécanismes d'érosion affectant les bassins rocheux. Ils représentent des zones de faiblesse exploitées en priorité par les processus de démantèlement et d'érosion, encourageant l'initiation de ravines et couloirs, mais aussi leur propagation. L'incorporation du control géologique dans les processus de surface contribue à une meilleure compréhension de l'évolution topographique de bassins actifs. Un algorithme de flux sédimentaire a été implémenté dans un modèle en cascade, lequel divise le bassin en biefs et en systèmes individuels répondant aux processus. Chaque unité inclut de façon simple les informations géomorpologiques et celles du flux sédimentaire dérivées à partir de SIG et de cartographie de terrain. Cet outil permet la simulation des transferts de masse dans les chenaux, considérants la variabilité de l'apport et son transport, et aide à réduire l'incertitude liée à la prédiction de bilans sédimentaires torrentiels. Ce travail vise très humblement d'éclairer quelques aspects de la dynamique sédimentaire en milieu torrentiel.

THREE DIMENSIONAL CHARACTERIZATION OF SOIL MACROPOROSITY BY X-RAY MICROTOMOGRAPHY

Analysis of the soil pore system represents an important way of characterizing soil structure. Properties such as the shape and number of pores can be determined through soil pore evaluations. This study presents a three-dimensional (3D) characterization of the shape and number of pores of a sub-tropical soil. To do so, a second generation X-ray microtomograph equipped with a plain type detector was employed. A voltage of 120 kV and current of 80 mA was applied to the X-ray tube. The soil samples analyzed were collected at three different depths (0-10, 10-20, and 20-30 cm). The results obtained allowed qualitative (images) and quantitative (3D) analyses of the soil structure, revealing the potential of the microtomographic technique, as well as the study of differences in soil macroporosity at different depths. Macroporosity was 5.14 % in the 0-10 cm layer, 5.10 % in the 10-20 cm layer, and 6.64 % in the 20-30 cm layer. The macroporosity of unclassified pores (UN) was 0.30 % (0-10 and 10-20 cm) and 0.40 % (20-30 cm), while equant pores (EQ) had values of 0.01 % at the three depths under analysis.

Planosols Developed in Different Geoenvironmental Conditions in Northeastern Brazil

ABSTRACT The semiarid region of northeastern Brazil has a large area occupied by Planosols, where in the State of Pernambuco these soils are mainly used for livestock farming and subsistence crops. The knowledge on these soils is limited, which compromises the understanding on their behavior, potentialities and limitations.This study aimed to analyze morphological, chemical, physical and mineralogical attributes of Planosols developed under different geoenvironmental conditions. Morphological descriptions and chemical, physical and mineralogical analyses were performed in four profiles of Planosols along a rainfall gradient. An increase in rainfall allowed for an increase in the clay content in the Bt horizon and a reduction in ESP, EC, Na+, CEC, S, pH (water and KCl) and soil density. Horizons A and E were thicker in Planosols in more humid environments. The increase in ESP associated with the presence of expansive minerals (smectite and vermiculite) allowed the development of a prismatic structure in Haplic Planosols and a columnar structure in Natric Planosols. The mineralogical assembly is indicative of poorly weathered soils. The mineralogical assemblies of the silt and clay fractions were similar in the different geoenvironments, while higher contents of easily alterable minerals were observed in the composition of the sand fraction in environments with a drier climate.

Cooperative kinking at distant sites in mechanically stressed DNA.

In cells, DNA is routinely subjected to significant levels of bending and twisting. In some cases, such as under physiological levels of supercoiling, DNA can be so highly strained, that it transitions into non-canonical structural conformations that are capable of relieving mechanical stress within the template. DNA minicircles offer a robust model system to study stress-induced DNA structures. Using DNA minicircles on the order of 100 bp in size, we have been able to control the bending and torsional stresses within a looped DNA construct. Through a combination of cryo-EM image reconstructions, Bal31 sensitivity assays and Brownian dynamics simulations, we have been able to analyze the effects of biologically relevant underwinding-induced kinks in DNA on the overall shape of DNA minicircles. Our results indicate that strongly underwound DNA minicircles, which mimic the physical behavior of small regulatory DNA loops, minimize their free energy by undergoing sequential, cooperative kinking at two sites that are located about 180° apart along the periphery of the minicircle. This novel form of structural cooperativity in DNA demonstrates that bending strain can localize hyperflexible kinks within the DNA template, which in turn reduces the energetic cost to tightly loop DNA.

Were Spanish migrants attracted by industrial agglomerations?: an analysis for the interwar years in the light of the new economic geography

In this paper we examine whether access to markets had a significant influence onmigration choices of Spanish internal migrants in the inter-war years. We perform astructural contrast of a New Economic Geography model that focus on the forwardlinkage that links workers location choice with the geography of industrial production,one of the centripetal forces that drive agglomeration in the NEG models. The resultshighlight the presence of this forward linkage in the Spanish economy of the inter-warperiod. That is, we prove the existence of a direct relation between workers¿ localizationdecisions and the market potential of the host regions. In addition, the direct estimationof the values associated with key parameters in the NEG model allows us to simulatethe migratory flows derived from different scenarios of the relative size of regions andthe distances between them. We show that in Spain the power of attraction of theagglomerations grew as they increased in size, but the high elasticity estimated for themigration costs reduced the intensity of the migratory flows. This could help to explainthe apparently low intensity of internal migrations in Spain until its upsurge during the1920s. This also explains the geography of migrations in Spain during this period,which hardly affected the regions furthest from the large industrial agglomerations (i.e.,regions such as Andalusia, Estremadura and Castile-La Mancha) but had an intenseeffect on the provinces nearest to the principal centres of industrial development.

Splenium of corpus callosum: patterns of interhemispheric interaction in children and adults.

The splenium of the corpus callosum connects the posterior cortices with fibers varying in size from thin late-myelinating axons in the anterior part, predominantly connecting parietal and temporal areas, to thick early-myelinating fibers in the posterior part, linking primary and secondary visual areas. In the adult human brain, the function of the splenium in a given area is defined by the specialization of the area and implemented via excitation and/or suppression of the contralateral homotopic and heterotopic areas at the same or different level of visual hierarchy. These mechanisms are facilitated by interhemispheric synchronization of oscillatory activity, also supported by the splenium. In postnatal ontogenesis, structural MRI reveals a protracted formation of the splenium during the first two decades of human life. In doing so, the slow myelination of the splenium correlates with the formation of interhemispheric excitatory influences in the extrastriate areas and the EEG synchronization, while the gradual increase of inhibitory effects in the striate cortex is linked to the local inhibitory circuitry. Reshaping interactions between interhemispherically distributed networks under various perceptual contexts allows sparsification of responses to superfluous information from the visual environment, leading to a reduction of metabolic and structural redundancy in a child's brain.

Were Spanish migrants attracted by industrial agglomerations?: an analysis for the interwar years in the light of the new economic geography

In this paper we examine whether access to markets had a significant influence onmigration choices of Spanish internal migrants in the inter-war years. We perform astructural contrast of a New Economic Geography model that focus on the forwardlinkage that links workers location choice with the geography of industrial production,one of the centripetal forces that drive agglomeration in the NEG models. The resultshighlight the presence of this forward linkage in the Spanish economy of the inter-warperiod. That is, we prove the existence of a direct relation between workers¿ localizationdecisions and the market potential of the host regions. In addition, the direct estimationof the values associated with key parameters in the NEG model allows us to simulatethe migratory flows derived from different scenarios of the relative size of regions andthe distances between them. We show that in Spain the power of attraction of theagglomerations grew as they increased in size, but the high elasticity estimated for themigration costs reduced the intensity of the migratory flows. This could help to explainthe apparently low intensity of internal migrations in Spain until its upsurge during the1920s. This also explains the geography of migrations in Spain during this period,which hardly affected the regions furthest from the large industrial agglomerations (i.e.,regions such as Andalusia, Estremadura and Castile-La Mancha) but had an intenseeffect on the provinces nearest to the principal centres of industrial development.

The ecological significance of arbuscular mycorrhizal fungal effects on clonal reproduction in plants

The population ecology of clonal plants depends on the number and distribution of ramets formed during growth. Variation in clonal reproduction has previously been explained by variation in effects of abiotic resource heterogeneity and by plant genotypic variation. Different co-occurring species of the mutualistic arbuscular mycorrhizal fungi (AMF) have been shown to differentially alter growth traits of Prunella vulgaris which we hypothesize would lead to changes in clonal reproduction. Two experiments were carried out to test whether different co-occurring mycorrhizal fungi significantly influence clonal reproduction of P. vulgaris whether this effect also occurs when P. vulgaris is growing in an artificial plant community and how the effects compare with plant genotype effects on clonal growth of P. vulgaris. In the first experiment the number of ramets of P. vulgaris growing in a plant community of simulated calcareous grassland was significantly affected by inoculation with different mycorrhizal fungi. The number of ramets produced by P. vulgaris differed by a factor of up to 1.8 with different mycorrhizal fungi. The fungal effects on the number of new ramets were independent of their effects on the biomass of P. vulgaris. In a second experiment 17 different genotypes of P. vulgaris were inoculated with different mycorrhizal fungi. There were significant main effects of genotypes and mycorrhizal fungi on clonal reproduction of P. vulgaris. The effect of different mycorrhizal fungi contributed more than the effect of plant genotype to variation in size and ramet production. However mean stolon length and spacer length which determine the spatial arrangement of ramets were only significantly affected by plant genotype. There were no mycorrhizal fungal X plant genotype interactions on clonal growth of P. vulgaris indicating that there is no obvious evidence that selection pressures would favor further coevolution between P. vulgaris and mycorrhizal fungal species. In natural communities plants can be colonized by several different AMF at the same time. The effect of the mixed AMF treatment on the growth and clonal reproduction of P. vulgaris could not be predicted from the responses of the plants to the single AMF To what extent however the patterns of colonization by different AMF differ among plants in a natural community is unknown. Since the effects of AMF on growth and clonal reproduction occur on a population of P. vulgaris in a microcosm plant community and because the effects are also as great as those caused by plant genotypic variation we conclude that the effects are strong enough to potentially affect population size and variation of clonal plants in communities.

Sex-linked genetic markers in the shrews of the Sorex araneus group : from free gene flow to speciation

SUMMARY: The shrews of the Sorex araneus group are morphologically .very similar, but have undergone a spectacular chromosomal evolution. Altogether, the shrews of this group present a complete array of every possible level of chromosomal and genetic differentiation. In South-Western Europe, four species are recognised: S. antiriorii, S. araneus, S. coronatus and S. granarius, which differ essentially by the amount and the composition of Robertsonian metacentric chromosomés. Additionally, several chromosome races of S. araneus are also present in the same region (i.e. Bretolet, Carlit, Cordon, Jura and Vaud). The objective of this thesis was to examine the genetic relationships between populations, races and /or species of the Sorex araneus group with a special emphasis onsex-specific markers (mtDNA and Y chromosome). We first investigate the evolutionary history of the shrews of the Sorex araneus group distributed in the South-Western Europe. The results of. these analyses confirmed the difficulty to draw a single dichotomic tree within this group. Incongruent mtDNA and Y chromosome phylogenies suggest further that genetic and chromosomal evolution are in this group partially independent processes and that the evolutionary history of the south-western European populations of the S. araneus group can only be understood if we consider secondary contacts between taxa, after their divergence (with genetic exchanges by means of hybridization and / or introgression). Using one male-inherited, one female inherited and eight biparentally inherited markers, we investigate the population genetic structure of the Valais shrew (Sorex antinorii). Overall there results suggest that two already well-differentiated genetic lineages colonized the Swiss Alps after the last glacial period and came into contact in the Rhône Valley. After the Valais shrew (Sorex antinorii) reached the Swiss Alps, it came into contact with the common shrew (Sorex araneus). When two species come into contact and hybridize, endogenous counter-selection of hybrids is usually first expressed as a reduced fertility or viability in hybrids of the heterogametic sex, a mechanism know as Haldane's rule (Haldane 1922). We first evaluated the extent of introgression for Y chromosome, mtDNA and autosomal markers in a hybrid zone between S. antinoriii and S. araneus. The overall level of genetic and karyotypic differentiation between the two species must be strong .enough to allow the detection asymmetric introgression. Secondly, we compared the levels of gene flow between chromosome common to both species and chromosome differently rearranged in each of them. We detected a significantly stronger genetic structure in rearranged chromosomes. Over a 10-year period, we even observed a decrease of genetic structure for common chromosomes. These results strongly support the role of chromosomal rearrangements in the reproductive barrier between S. araneus and S. anfinorii. Overall, this thesis underlines the need to use different inherited (paternally, maternally and / or biparentally) and chromosomally located (on common vs. on rearranged chromosomes) markers to obtain more accurate pictures of genetic relationships between populations or species. RÉSUMÉ: Les musaraignes du groupe Sorex araneus sont morphologiquement très proches, mais ont connu une spectaculaire évolution chromosomique. Prises dans leur ensemble, les musaraignes de ce groupe présentent tous les nivaux possibles de différenciation génétique et chromosomique. Dans le sud-ouest de l'Europe, quatre espèces appartenant à ce groupe sont présentes : S. antinorii, S. araneus, S. coronatus et S. granarius. Celles-ci diffèrent essentiellement par leur caryotype dont la variabilité est principalement due à des fusions Robertsoniennes. De plus, plusieurs races chromosomiques appartenant à S. araneus sont aussi présentes dans la même région (i.e. les races Bretolet, Carlit, Cordon, Jura et Vaud). L'objectif de cette thèse était d'examiner les relations génétiques entre populations, races et/ou espèces du groupe S. araneus, en utilisant particulièrement des marqueurs liés aux sexes (ADN mitochondrial et Chromosome Y). Nous avons dans un premier temps retracé l'histoire évolutive des musaraignes de ce groupe dans le sud-ouest de l'Europe. Les résultats dé ces analyses confirment qu'il est difficile de tracer un simple arbre dichotomique au sein de ce groupe. Les arbres phylogénétiques obtenus sur l'ADN mitochondrial et le chromosome Y sont incongruents et suggèrent de plus que l'évolution génétique et chromosomique sont des processus indépendants. L'histoire évolutive -des populations de ce groupe ne peut. être comprise qu'en considérant des contacts secondaires entre taxa postérieure à leur divergence et induisant des échanges génétiques par hybridation et/ou introgression. Par la suite, nous avons examiné la structure génétique des populations de la musaraigne du Valais, S. antinorii, en utilisant un marqueur transmis par les mâles, un marqueur transmis par les femelles et huit marqueurs transmis par les 2 sexes. Nos résultats suggèrent que deux lignées génétiquement bien différenciées aient colonisé les Alpes Suisses, après les dernières glaciations et entrent en contact dans là Vallée du Rhône. Après avoir franchi les Alpes Suisses, la musaraigne du Valais est entrée en contact avec là musaraigne commune (S. araneus). Lorsque deux espèces entrent en contact et s'hybrident, la sélection contre les hybrides implique habituellement une baisse de fertilité ou de viabilité des hybrides du sexe hétérogamétique (i.e. les mâles XY chez les mammifères). Ce mécanisme est connu sous le nom de règle de Haldane (Haldane 1922) et implique une plus forte structuration génétique de marqueurs males - spécifiques que des marqueurs femelles spécifiques. Nous avons donc évalué le degré d'introgression des marqueurs situés sur le chromosome Y, sur l'ADN mitochondrial et sur des autosomes dans une zone hybride entre S. araneus et S. antinorii. Le niveau de différenciation chromosomique et génétique entre les 2 espèces doit être suffisamment fort pour ne pas permettre la détection d'une introgression asymétrique entre les sexes. Dans un second temps, nous avons comparé les niveaux de flux de gênes mesurés à l'échelle du chromosome, pour des chromosomes communs aux deux espèces et pour des chromosomes différemment arrangées dans chacune des deux espèces. Nous avons détecté une structure génétique significativement plus forte sur les chromosomes réarrangés et comme la zone hybride a été étudiée à dix années d'intervalle, nous observons même une diminution de la structure génétique pour les chromosomes communs au cours du temps.. Ces résultats soutiennent fortement l'hypothèse d'un rôle des réarrangements chromosomiques dans l'établissement d'une barrière reproductive entre S. araneus et S. antinorii. Ainsi cette thèse souligne l'utilité d'utiliser des marqueurs génétiques avec différents modes de transmission. (par les mâles, par les femelles et/ou par les 2 sexes) ou localisés au niveau du chromosome (chromosomes communs vs chromosomes réarrangés) afin d'obtenir une image plus juste ou du moins plus complète des relations génétiques entre populations ou espèces.

Phyletic trends in uppermost Triassic (Rhaetian) Radiolaria: Two examples from Queen Charlotte Islands, British Columbia, Canada

Risella Carter and Laxtorum Blome, two genera from the diverse Rhaetian fauna of the Sandilands Formation, Queen Charlotte Islands, are used to illustrate phyletic trends in latest Triassic Radiolaria. Several distinct morphotypes constituting a lineage are recognized for each genus. These lineages are homogenous, evolved in situ, and show a continuum of variation through time. The evolution of Risella takes place entirely in the Rhaetian and all species disappear at the end of the Triassic. Earliest species of Laxtorum appear in the upper Norian and evolve rapidly in the Rhaetian. All Rhaetian species go extinct at the end of the Triassic but the genus survives marginally into the Lower Jurassic. Morphological transformations in Risella (a paronaellid) are manifest in the external/cortical shell as the shape changes from triangular to three-rayed. In Laxtorum, distal post abdominal chambers become constricted and eventually develop a terminal tube while, at the same time, an increase in size and sphericity is coupled with a reduction in the number of post abdominal chambers. Evolutionary transitions in the Risella lineage probably represent a reversion of the normal hypothesized trend for paronaellid radiolarians. In the Laxtorum lineage, comparisons with other groups and species displaying similar homeomorphies suggest the evolutionary trends are fundamental and occur repeatedly in faunas of all ages.

Morphometric relationhip in the Chaetognath Sagitta setosa Muller 1847: within population versus between population variability.

Sagitta setosa is a neritic Chaetognath exhibiting a discontinuous geographic distribution. To assess the influence of its discontinuous geographic distribution on morphometric variability between isolated populations, we conducted a biometric study of S. setosa from three different locations: Goteborg and Plymouth (North Atlantic) and Barcelona ( Western Mediterranean). Out results do indicate some disparity between the populations that is reflected not in size differences, largely determined by water temperature, but in shape (body proportions).

Inferring epidemic contact structure from phylogenetic trees.

Contact structure is believed to have a large impact on epidemic spreading and consequently using networks to model such contact structure continues to gain interest in epidemiology. However, detailed knowledge of the exact contact structure underlying real epidemics is limited. Here we address the question whether the structure of the contact network leaves a detectable genetic fingerprint in the pathogen population. To this end we compare phylogenies generated by disease outbreaks in simulated populations with different types of contact networks. We find that the shape of these phylogenies strongly depends on contact structure. In particular, measures of tree imbalance allow us to quantify to what extent the contact structure underlying an epidemic deviates from a null model contact network and illustrate this in the case of random mixing. Using a phylogeny from the Swiss HIV epidemic, we show that this epidemic has a significantly more unbalanced tree than would be expected from random mixing.

Scale-specific sex-biased dispersal in the Valais shrew unveiled by genetic variation on the Y chromosome, autosomes, and mitochondrial DNA.

We investigated sex specificities in the evolutionary processes shaping Y chromosome, autosomes, and mitochondrial DNA patterns of genetic structure in the Valais shrew (Sorex antinorii), a mountain dwelling species with a hierarchical distribution. Both hierarchical analyses of variance and isolation-by-distance analyses revealed patterns of population structure that were not consistent across maternal, paternal, and biparentally inherited markers. Differentiation on a Y microsatellite was lower than expected from the comparison with autosomal microsatellites and mtDNA, and it was mostly due to genetic variance among populations within valleys, whereas the opposite was observed on other markers. In addition, there was no pattern of isolation by distance for the Y, whereas there was strong isolation by distance on mtDNA and autosomes. We use a hierarchical island model of coancestry dynamics to discuss the relative roles of the microevolutionary forces that may induce such patterns. We conclude that sex-biased dispersal is the most important driver of the observed genetic structure, but with an intriguing twist: it seems that dispersal is strongly male biased at large spatial scale, whereas it is mildly biased in favor of females at local scale. These results add to recent reports of scale-specific sex-biased dispersal patterns, and emphasize the usefulness of the Y chromosome in conjunction with mtDNA and autosomes to infer sex specificities.

Electroconvulsive therapy-induced brain plasticity determines therapeutic outcome in mood disorders.

There remains much scientific, clinical, and ethical controversy concerning the use of electroconvulsive therapy (ECT) for psychiatric disorders stemming from a lack of information and knowledge about how such treatment might work, given its nonspecific and spatially unfocused nature. The mode of action of ECT has even been ascribed to a "barbaric" form of placebo effect. Here we show differential, highly specific, spatially distributed effects of ECT on regional brain structure in two populations: patients with unipolar or bipolar disorder. Unipolar and bipolar disorders respond differentially to ECT and the associated local brain-volume changes, which occur in areas previously associated with these diseases, correlate with symptom severity and the therapeutic effect. Our unique evidence shows that electrophysical therapeutic effects, although applied generally, take on regional significance through interactions with brain pathophysiology.