967 resultados para square cavity
Resumo:
Estampado en la misma hoja con: "Vista de dos Templos antiguos en la plaza del Eco de Sagunto"
Resumo:
Hay un ejemplar encuadernado con: Deux sonates et La Coquette pour forte piano (XVIII/2815). Firma autógrafa de J.C. Salomon en la port.
Resumo:
Hay un ejemplar encuadernado con: Deux sonates et La Coquette pour forte piano (XVIII/2815). Firma autógrafa de J.C. Salomon en la port.
Resumo:
Direct numerical simulations are performed to analyze the three-dimensional instability of flows over three-dimensional cavities. The flow structures at different Reynolds numbers are investigated by using the spectral-element solver nek5000. As the Reynolds number increasing, the lateral wall effects become more important, the recirculation zone shrinks, the front vortex increases and the flow structure inside of the cavity becomes more complex. Results show that the flow bifurcates from a steady state to an oscillatory regime beyond a value of Reynolds number Re = 1100.
Resumo:
To correctly evaluate semantic technologies and to obtain results that can be easily integrated, we need to put evaluations under the scope of a unique software quality model. This paper presents SemQuaRE, a quality model for semantic technologies. SemQuaRE is based on the SQuaRE standard and describes a set of quality characteristics specific to semantic technologies and the quality measures that can be used for their measurement. It also provides detailed formulas for the calculation of such measures. The paper shows that SemQuaRE is complete with respect to current evaluation trends and that it has been successfully applied in practice.
Resumo:
Sobre arquitectura
Resumo:
The three-dimensional wall-bounded open cavity may be considered as a simplified geometry found in industrial applications such as leading gear or slotted flats on the airplane. Understanding the three-dimensional complex flow structure that surrounds this particular geometry is therefore of major industrial interest. At the light of the remarkable former investigations in this kind of flows, enough evidences suggest that the lateral walls have a great influence on the flow features and hence on their instability modes. Nevertheless, even though there is a large body of literature on cavity flows, most of them are based on the assumption that the flow is two-dimensional and spanwise-periodic. The flow over realistic open cavity should be considered. This thesis presents an investigation of three-dimensional wall-bounded open cavity with geometric ratio 6:2:1. To this aim, three-dimensional Direct Numerical Simulation (DNS) and global linear instability have been performed. Linear instability analysis reveals that the onset of the first instability in this open cavity is around Recr 1080. The three-dimensional shear layer mode with a complex structure is shown to be the most unstable mode. I t is noteworthy that the flow pattern of this high-frequency shear layer mode is similar to the observed unstable oscillations in supercritical unstable case. DNS of the cavity flow carried out at different Reynolds number from steady state until a nonlinear saturated state is obtained. The comparison of time histories of kinetic energy presents a clearly dominant energetic mode which shifts between low-frequency and highfrequency oscillation. A complete flow patterns from subcritical cases to supercritical case has been put in evidence. The flow structure at the supercritical case Re=1100 resembles typical wake-shedding instability oscillations with a lateral motion existed in the subcritical cases. Also, This flow pattern is similar to the observations in experiments. In order to validate the linear instability analysis results, the topology of the composite flow fields reconstructed by linear superposition of a three-dimensional base flow and its leading three-dimensional global eigenmodes has been studied. The instantaneous wall streamlines of those composited flows display distinguish influence region of each eigenmode. Attention has been focused on the leading high-frequency shear layer mode; the composite flow fields have been fully recognized with respect to the downstream wave shedding. The three-dimensional shear layer mode is shown to give rise to a typical wake-shedding instability with a lateral motions occurring downstream which is in good agreement with the experiment results. Moreover, the spanwise-periodic, open cavity with the same length to depth ratio has been also studied. The most unstable linear mode is different from the real three-dimensional cavity flow, because of the existence of the side walls. Structure sensitivity of the unstable global mode is analyzed in the flow control context. The adjoint-based sensitivity analysis has been employed to localized the receptivity region, where the flow is more sensible to momentum forcing and mass injection. Because of the non-normality of the linearized Navier-Stokes equations, the direct and adjoint field has a large spatial separation. The strongest sensitivity region is locate in the upstream lip of the three-dimensional cavity. This numerical finding is in agreement with experimental observations. Finally, a prototype of passive flow control strategy is applied.
Resumo:
A significant amount of research has been conducted on FRP-confined circular columns, but much less is known about rectangular/square columns in which the effectiveness of confinement is much reduced. This paper presents the results of experimental investigations on low strength square concrete columns confined with FRP. Axial compression tests were performed on ten intermediate size columns. The tests results indicate that FRP composites can significantly improve the bearing capacity and ductility of square section reinforced concrete columns with rounded corners. The strength enhancement ratio is greater the lower the concrete strength and also increases with the stiffness of the jacket. The confined concrete behaviour was predicted according to the more accepted theoretical models and compared with experimental results. There are two key parameters which critically influence the fitting of the models: the strain efficiency factor and the effect of confinement in non-circular sections.
Resumo:
The chaperonin GroEL is an oligomeric double ring structure that, together with the cochaperonin GroES, assists protein folding. Biochemical analyses indicate that folding occurs in a cis ternary complex in which substrate is sequestered within the GroEL central cavity underneath GroES. Recently, however, studies of GroEL “minichaperones” containing only the apical substrate binding subdomain have questioned the functional importance of substrate encapsulation within GroEL-GroES complexes. Minichaperones were reported to assist folding despite the fact that they are monomeric and therefore cannot form a central cavity. Here we compare directly the folding activity of minichaperones with that of the full GroEL-GroES system. In agreement with earlier studies, minichaperones assist folding of some proteins. However, this effect is observed only under conditions where substantial spontaneous folding is also observed and is indistinguishable from that resulting from addition of the nonchaperone protein α-casein. By contrast, the full GroE system efficiently promotes folding of several substrates under conditions where essentially no spontaneous folding is observed. These data argue that the full GroEL folding activity requires the intact GroEL-GroES complex, and in light of previous studies, underscore the importance of substrate encapsulation for providing a folding environment distinct from the bulk solution.
Resumo:
The stability of the functional equation f(x ○ y) = H(f(x), f(y)) (x, y ∈ S) is investigated, where H is a homogeneous function and ○ is a square-symmetric operation on the set S. The results presented include and generalize the classical theorem of Hyers obtained in 1941 on the stability of the Cauchy functional equation.
Resumo:
Synthetic C peptides, corresponding to the C helix of the HIV type 1 (HIV-1) gp41 envelope protein, are potent inhibitors of HIV-1 membrane fusion. One such peptide is in clinical trials. The crystal structure of the gp41 core, in its proposed fusion-active conformation, is a trimer of helical hairpins in which three C helices pack against a central coiled coil. Each C helix shows especially prominent contacts with one of three symmetry-related, hydrophobic cavities on the surface of the coiled coil. We show that the inhibitory activity of the C peptide C34 depends on its ability to bind to this coiled-coil cavity. Moreover, examining a series of C34 peptide variants with modified cavity-binding residues, we find a linear relationship between the logarithm of the inhibitory potency and the stability of the corresponding helical-hairpin complexes. Our results provide strong evidence that this coiled-coil cavity is a good drug target and clarify the mechanism of C peptide inhibition. They also suggest simple, quantitative assays for the identification and evaluation of analogous inhibitors of HIV-1 entry.
Resumo:
A saliva é um fluido biológico com importante papel nos fenômenos que ocorrem na cavidade bucal. O efeito da sua composição sobre as perdas de estruturas dentais de origem não cariosa, como o desgaste dental, tem sido estudado. No entanto, há conflitos nos resultados apresentados por esses estudos, mostrando uma dificuldade em identificar os fatores salivares que possam proteger ou intensificar a evolução do processo. Assim, o presente estudo se propôs a analisar as características clínicas, comportamentais e de alguns parâmetros salivares em dois grupos experimentais: pacientes que apresentam lesões cervicais não cariosas (LCNCs) (n=20) e um grupo controle (n=20). Foram coletados dados clínicos e comportamentais através de um exame clínico e de uma entrevista, a seguir amostras de saliva estimulada e não-estimulada foram coletadas e analisados: pH, capacidade tampão, fluxo salivar, concentração de proteínas totais, atividade da amilase salivar, concentração de ureia salivar e a concentração dos íons sódio, fósforo, potássio, magnésio e cálcio. A capacidade tampão foi medida pela titulação da saliva com uma solução de HCL 0,01N; o fluxo salivar se deu pela relação entre o volume de saliva e o tempo de coleta (ml/min); as concentrações de proteínas totais, ureia e a atividade da amilase foram determinadas por método colorimétrico; as concentrações dos íons cálcio, fósforo, magnésio, potássio e sódio foram determinadas por espectrometria de emissão óptica com plasma acoplado indutivamente (ICP-OES). Os resultados foram submetidos aos testes Qui-quadrado, teste t e Mann-Whitney (p<0,05). As características relacionadas aos hábitos de higiene dental, dieta ácida, hábitos parafuncionais, presença de distúrbios gástricos, secura bucal e prévio tratamento periodontal, não mostraram relação com a presença de lesões cervicais não cariosas. Os pacientes portadores de LCNCs se queixaram mais de sensibilidade dental (p=0,0014). Foi observado um maior número de lesões cervicais de pequena profundidade (79%), em formato de cunha (72%), apresentando hipersensibilidade dentinária (HD) (86%), localizados nos dentes posteriores (88,18%) e na maxila (66,14%), sendo os pré-molares os dentes mais afetados (56,69%). Os níveis de cálcio na saliva não-estimulada do grupo de pacientes com LCNCs foi significativamente maior em relação ao controle (p=0,041). A concentração de potássio na saliva estimulada foi significativamente maior no grupo controle (p=0,028). As variáveis fluxo salivar, pH, capacidade tampão, concentração de proteínas totais, ureia, amilase, sódio, magnésio e fósforo não mostraram diferenças estatisticamente significativas entre os dois grupos. Conclui-se que os fatores comportamentais não interferiram no aparecimento das lesões cervicais não cariosas. As LCNCs são pouco profundas, em formato de cunha, acometem mais dentes superiores e pré-molares e são acompanhadas de HD. As concentrações de cálcio e potássio podem interferir na formação das LCNCs.