Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

To what extent has research conducted by the GaWC Research Network aided our understanding of large EU law firm geography?

This thesis explores whether a specific group of large EU law firms exhibited multiple common behaviours regarding their EU geographies between 1998 and 2009. These potentially common behaviours included their preferences for trading in certain EU locations, their usage of law firm alliances, and the specific reasons why they opened or closed EU branch offices. If my hypothesis is confirmed, this may indicate that certain aspects of large law firm geography are predictable – a finding potentially of interest to various stakeholders globally, including legal regulators, academics and law firms. In testing my hypothesis, I have drawn on research conducted by the Globalization and World Cities (GaWC) Research Network to assist me. Between 1999 and 2010, the GaWC published seven research papers exploring the geographies of large US and UK law firms. Several of the GaWC’s observations arising from these studies were evidence-based; others were speculative – including a novel approach for explaining legal practice branch office change, not adopted in research conducted previously or subsequently. By distilling the GaWC’s key observations these papers into a series of “sub-hypotheses”, I been able to test whether the geographical behaviours of my novel cohort of large EU law firms reflect those suggested by the GaWC. The more the GaWC’s suggested behaviours are observed among my cohort, the more my hypothesis will be supported. In conducting this exercise, I will additionally evaluate the extent to which the GaWC’s research has aided our understanding of large EU law firm geography. Ultimately, my findings broadly support most of the GaWC’s observations, notwithstanding our cohort differences and the speculative nature of several of the GaWC’s propositions. My investigation has also allowed me to refine several of the GaWC’s observations regarding commonly-observable large law firm geographical behaviours, while also addressing a key omission from the group’s research output.

A HARD PUSH FOR SOFT SKILLS: AN EXAMINATION OF POLICY AND RESEARCH ON NON-COGNITIVE SKILLS IN CANADIAN K-12 SCHOOLING

Non-cognitive skills have caught the attention of current education policy writers in Canada. Within the last 10 years, almost every province has produced a document including the importance of supporting non-cognitive skills in K-12 students in the classroom. Although often called different names (such as learning skills, cross curricular competencies, and 20th Century Skills) and occasionally viewed through different lenses (such as emotional intelligence skills, character skills, and work habits), what unifies non-cognitive skills within the policy documents is the claim that students that are strong in these skills are more successful in academic achievement and are more successful in post-secondary endeavors. Though the interest from policy-makers and educators is clear, there are still many questions about non-cognitive skills that have yet to be answered. These include: What skills are the most important for teacher’s to support in the classroom? What are these skills’ exact contributions to student success? How can teachers best support these skills? Are there currently reliable and valid measures of these skills? These are very important questions worth answering if Canadian teachers are expected to support non-cognitive skills in their classrooms with an already burdened workload. As well, it can begin to untangle the plethora of research that exists within the non-cognitive realm. Without a critical look at the current literature, it is impossible to ensure that these policies are effective in Canadian classrooms, and to see an alignment between research and policy. Upon analysis of Canadian curriculum, five non-cognitive skills were found to be the most prevalent among many of the provinces: Self-Regulation, Collaboration, Initiative, Responsibility and Creativity. The available research literature was then examined to determine the utility of teaching these skills in the classroom (can students improve on these skills, do these skills impact other aspects of students’ lives, and are there methods to validly and reliably assess these skills). It was found that Self-Regulation and Initiative had the strongest basis for being implemented in the classroom. On the other hand, Creativity still requires a lot more justification in terms of its impact on students’ lives and ability to assess in the classroom.

Casting a Critical 'I' Over Caffrey's Irish Ale: Soft Words, Strongly Spoken

By employing a research approach, known as subjective personal introspection - the critical "I" - four co-researchers wrote extensive autobiographical essays on their responses to an advertisement for Caffrey's Irish Ale. By delving in the shamelessly subjective this paper draws out the main themes by comparing, contrasting and critiquing the introspective insights of these four critical "I's". In doing so, it demonstrates that there can be no grounded interpretations of an advertising text, that the critical "I" can yield uniquely illuminating insights, and that its chief power, as a research method, lies in its capacity for creativity, imagination and discovery.

Application of computer-aided tomography techniques to visualize kelp holdfast structure reveals the importance of habitat complexity for supporting marine biodiversity

Ecosystem engineers that increase habitat complexity are keystone species in marine systems, increasing shelter and niche availability, and therefore biodiversity. For example, kelp holdfasts form intricate structures and host the largest number of organisms in kelp ecosystems. However, methods that quantify 3D habitat complexity have only seldom been used in marine habitats, and never in kelp holdfast communities. This study investigated the role of kelp holdfasts (Laminaria hyperborea) in supporting benthic faunal biodiversity. Computer-aided tomography (CT-) scanning was used to quantify the three-dimensional geometrical complexity of holdfasts, including volume, surface area and surface fractal dimension (FD). Additionally, the number of haptera, number of haptera per unit of volume, and age of kelps were estimated. These measurements were compared to faunal biodiversity and community structure, using partial least-squares regression and multivariate ordination. Holdfast volume explained most of the variance observed in biodiversity indices, however all other complexity measures also strongly contributed to the variance observed. Multivariate ordinations further revealed that surface area and haptera per unit of volume accounted for the patterns observed in faunal community structure. Using 3D image analysis, this study makes a strong contribution to elucidate quantitative mechanisms underlying the observed relationship between biodiversity and habitat complexity. Furthermore, the potential of CT-scanning as an ecological tool is demonstrated, and a methodology for its use in future similar studies is established. Such spatially resolved imager analysis could help identify structurally complex areas as biodiversity hotspots, and may support the prioritization of areas for conservation.

Application of computer-aided tomography techniques to visualize kelp holdfast structure reveals the importance of habitat complexity for supporting marine biodiversity

Ecosystem engineers that increase habitat complexity are keystone species in marine systems, increasing shelter and niche availability, and therefore biodiversity. For example, kelp holdfasts form intricate structures and host the largest number of organisms in kelp ecosystems. However, methods that quantify 3D habitat complexity have only seldom been used in marine habitats, and never in kelp holdfast communities. This study investigated the role of kelp holdfasts (Laminaria hyperborea) in supporting benthic faunal biodiversity. Computer-aided tomography (CT-) scanning was used to quantify the three-dimensional geometrical complexity of holdfasts, including volume, surface area and surface fractal dimension (FD). Additionally, the number of haptera, number of haptera per unit of volume, and age of kelps were estimated. These measurements were compared to faunal biodiversity and community structure, using partial least-squares regression and multivariate ordination. Holdfast volume explained most of the variance observed in biodiversity indices, however all other complexity measures also strongly contributed to the variance observed. Multivariate ordinations further revealed that surface area and haptera per unit of volume accounted for the patterns observed in faunal community structure. Using 3D image analysis, this study makes a strong contribution to elucidate quantitative mechanisms underlying the observed relationship between biodiversity and habitat complexity. Furthermore, the potential of CT-scanning as an ecological tool is demonstrated, and a methodology for its use in future similar studies is established. Such spatially resolved imager analysis could help identify structurally complex areas as biodiversity hotspots, and may support the prioritization of areas for conservation.

Veranderende rol van de controller. Balans tussen het toepassen van hard en soft controls

Het doel van dit onderzoek is om inzicht te geven in de ontwikkeling van de rol van de controller en te onderzoeken hoe de rol van de controller zich verhoudt tot het gebruik van hard en soft controls. Het onderzoek is uitgevoerd in de vorm van een case study waarbij de onderzoeksdata op twee manieren is verzameld. Ten eerste is door middel van desk research op basis van brondocumenten een overzicht in de tijd gemaakt van de gehanteerde management control systemen bij de casusorganisatie, zijnde vier lokale Rabobank vestigingen. Ten tweede is voor het beantwoorden van de deelvragen en hoofdvraag gebruik gemaakt van semigestructureerde interviews. De ontwikkelingen binnen management control laten zien dat de invulling hiervan bij de casusorganisatie veranderd is en dat management control niet meer alleen vraagt om hard controls. In de casusorganisatie zijn de hard controls duidelijk ingericht en laten de onderzoeksresultaten zien dat soft controls wel worden uitgevoerd maar niet concreet zijn geformuleerd en ingericht. Ten aanzien van het toepassen van hard of soft controls blijkt dat de nadruk ligt op hard controls. De verhouding lijkt samen te hangen met de verschillen in inrichting van de control afdeling en fase waarin de vier verschillende lokale banken zich bevinden. De ontwikkeling die reeds heeft plaatsgevonden en de verwachte ontwikkelingen ten aanzien van de taken van de controller en het toepassen van het type controls, duiden op een verschuiving van traditioneel controlewerk naar een controller die steeds meer betrokken is bij de business en gesprekspartner is van management en directie. De rol van de controller heeft zich doorontwikkeld en is veranderd van achteraf controle uitvoeren (controleur-rol) naar een veel bredere partner-rol die ook aan de voorkant met de business probeert mee te denken en management en directie ondersteunt bij organisatieveranderingen. Het bewustzijn ten aanzien van het inzetten van verschillende type controls, passend bij de doelstelling en situatie, is de laatste jaren toegenomen. Naast sturing op resultaat-, vindt nu ook actiesturen en medewerker- en leiderschapssturing plaats. De rol van de controller is over tijd veranderd, maar er heeft geen duidelijke verschuiving plaatsgevonden in het toepassen van het type controls van hard naar soft.

Soft Budget Constraints and Regional Industrial Policy: Reinterpreting the Rise and fall of De Lorean

The rise and fall of De Lorean Motor Cars Limited (DMCL) has been traditionally interpreted as either the result either of John De Lorean’s psychological flaws or as confirming the supposed limitations of activist industrial policy. However, when the episode is examined in greater historical detail, neither of these interpretations are compelling. The reinterpretation outlined here draws on institutional analysis as well as a range of archival sources, much of it previously unreleased. The inefficiencies within the original contractual agreement are highlighted. The lack of credibility associated with this agreement was in turn traceable to the institutional environment (with its associated risk-reward implications) under which industrial policy operated. This environment had a political element - it had been distorted by the Troubles and the resulting fears policymakers had of a cumulative causation relationship between violence and unemployment. Officials in Belfast, against Treasury opposition, advocated state-led entrepreneurship as a policy response.

Utility of sarcoma-specific fusion gene analysis in paraffin-embedded material for routine diagnosis at a specialist centre.

AIMS: Diagnosis of soft tissue sarcomas can be difficult. It can be aided by detection of specific genetic aberrations in many cases. This study assessed the utility of a molecular genetics/cytogenetics service as part of the routine diagnostic service at the Royal Marsden Hospital. METHODS: A retrospective audit was performed over a 15-month period to evaluate the diagnostic usefulness for soft tissue sarcomas with translocations of fluorescence in situ hybridisation (FISH) and reverse-transcriptase PCR (RT-PCR) in paraffin-embedded (PE) material. Results were compared with histology, and evaluated. RESULTS: Molecular investigations were performed on PE material in 158 samples (total 194 RT-PCR and 174 FISH tests), of which 85 were referral cases. Synovial sarcoma, Ewing sarcoma and low-grade fibromyxoid sarcoma were the most commonly tested tumours. Myxoid liposarcoma showed the best histological and molecular concordance, and alveolar rhabdomyosarcoma showed the best agreement between methods. FISH had a higher sensitivity for detecting tumours (73%, compared with 59% for RT-PCR) with a better success rate than RT-PCR, although the latter was specific in identifying the partner gene for each fusion. In particular, referral blocks in which methods of tissue fixation and processing were not certain resulted in higher RT-PCR failure rates. CONCLUSIONS: FISH and RT-PCR on PE tissue are practical and effective ancillary tools in the diagnosis of soft tissue sarcomas. They are useful in confirming doubtful histological diagnoses and excluding malignant diagnoses. PCR is less sensitive than FISH, and the use of both techniques is optimal for maximising the detection rate of translocation-positive sarcomas.

Meningeal alveolar soft part sarcoma confirmed by characteristic ASPCR1-TFE3 fusion

Sarcoma metastatic to the brain is uncommon and rarely occurs as the initial manifestation of tumor. Alveolar soft part sarcoma (ASPS) is a rare but well-studied subtype of sarcoma. A 39-year-old man presented with seizures due to a left temporal meningeal-enhancing lesion with striking brain edema on MRI. The patient underwent neurosurgical resection for suspected meningioma. Histology showed large tumor cells clustering and forming small nests, in places with pseudoalveolar pattern. Diastase-resistant periodic acid-Schiff revealed very rare granular and rod-like cytoplasmic inclusions. Immunohistochemistry showed convincing positivity only with vimentin and smooth muscle actin. The histological features were strongly suggestive of ASPS. At the molecular level RT-PCR and sequencing analysis demonstrated ASPCR1-TFE3 fusion confirming the histological diagnosis of ASPS. There was no evidence of primary extracranial tumor by physical examination and on chest and abdominal CT scan 11 months after presentation. ASPS typically arise from the soft tissues of the extremities and develop multiple metastatic deposits usually with a long clinical course. This case may represent primary meningeal ASPS although metastatic deposit from an undiscovered primary site cannot be entirely excluded.

The EU referendum and the UK environment:The Future Under a 'Hard' and a 'Soft' Brexit

'Brexit means Brexit’: but what does Brexit mean for the environment? In the new EUrefEnv study, Dr Charlotte Burns (University of York), Prof Andrew Jordan and Dr Viviane Gravey (University of East Anglia) explore what Brexit may mean for UK environmental policies and governance processes by comparing two scenarios: a ‘soft’ and a ‘hard’ Brexit. A ‘soft’ Brexit would see the UK remain as close as possible to the EU, establishing a new relationship akin to Norway’s relationship with the EU. Conversely a ‘hard’ Brexit would see the UK trade with the EU under World Trade Organisation rules. Both will generate radically different impacts on policies, systems of governance and levels of environmental quality in the UK – key issues that should inform forthcoming negotiations to effect Brexit. The study concludes with suggestions for future research and policy.

FPGA-based soft-core processors for image processing applications

With security and surveillance, there is an increasing need to process image data efficiently and effectively either at source or in a large data network. Whilst a Field-Programmable Gate Array (FPGA) has been seen as a key technology for enabling this, the design process has been viewed as problematic in terms of the time and effort needed for implementation and verification. The work here proposes a different approach of using optimized FPGA-based soft-core processors which allows the user to exploit the task and data level parallelism to achieve the quality of dedicated FPGA implementations whilst reducing design time. The paper also reports some preliminary
progress on the design flow to program the structure. An implementation for a Histogram of Gradients algorithm is also reported which shows that a performance of 328 fps can be achieved with this design approach, whilst avoiding the long design time, verification and debugging steps associated with conventional FPGA implementations.

Global efficiency of innovative rotational mold directly heated by thermal fluid

The article is focused on analysis of global efficiency of new mold for rotational molding of plastic parts, being directly heated by thermal fluid. The overall efficiency is based on several items such as reduction of cycle time, better uniformity of heating-cooling and low energy consumption. The new tool takes advantage of additive fabrication and electroforming for making the optimal manifold and cavity shell of the mold. Experimental test of a prototype mold was carried out on an experimental rotational molding machine, developed for this purpose, measuring wall temperature, and internal air temperature, with and without plastic material inside. Results were compared with conventional mold heated into an oven and to theoretical simulations done by Computational Fluid Dynamic software (CFD). The analysis represents considerable improvement of cycle time related to conventional methods (heated by oven) and better thermal uniformity to conventional procedures by direct heating of oil with external channels. In addition to thermal analysis an energetic efficiency study was done. POLYM. ENG. SCI., 52:1998-2005, 2012. © 2012 Society of Plastics Engineers Copyright © 2012 Society of Plastics Engineers.