Analises paramétricas de colunas granulares encamisadas com tecido geossintético através de software Ringtrac

This study attempts a preliminary assessment of the behavior of a soil improvement system with the use of encased columns of granular material with geosynthetic (columns Ringtrac ® ). This evaluation was performed using the software Ringtrac ® (developed by Huesker GmbH, Germany), which required different parameters such as soil Oedometric Module, friction angle of soil, thickness of soft soil and the embankment height .In each analysis, one parameter was varied and the other different parameters considered were fixed, resulting in a total of 726 results. Were considered valid only the results where the radial deformation of the geosynthetic encased column did not exceed the value of 4%, which is the maximum radial deformation of the geosynthetic adopted by the Ringtrac ® program. The analysis results are shown graphically in this study, evaluating the tension values in the column and obtained settlements in each analysis. It’s proven in this preliminary study that the variation of the soft soil friction angle in the Ringtrac ® column, will not significantly affect the values of strain on the tension in the column and settlements on the ground. Furthermore, the variation of Oedometric Module on the soil, will significantly affect the tension values in the column and the settlements in the soil

Modelagem e avaliação de um sistema de refrigeração por absorção para residências e instalações de pequeno porte

This work presents a study of the absorption refrigeration system and the modeling and evaluation of two cycles using the binary solutions water-lithium bromide and ammonia-water for an equipment to be used in small size plants like residences. The study and evaluation aims the complete understanding of all parts of the system and the influence of each one of them as well as the spread of the knowledge to raise the use of this type of equipment in all sizes in order to decrease the energetic consumption of plants of all scales and making viable the alternative sources. The study is done in each element of the cycle separately and in some auxiliary equipments required in the operation such as the main power source, the solar collector. The software used for modeling, with emphasis on thermal part, was the EES (Engineering Equation Solver), that permitted the thermal balance calculus and acquisition of the used fluids properties. The results obtained for the equipment shows the system is more complex than the widely used in business, however, it can be viable and represents an alternative to increase the energetic efficiency

Projeto CHRONOS - desenvolvimento e aplicação de um sistema de freios automotivo

The automobilist Market is more competitive each day, with new products developed by great technological innovations, daily challenging new concepts of Engineering. This monograph aims to explain the development of a brake system project completely, with emphasis on preliminary calculations made from a worksheet in Excel, for a better understanding of the components, which can be improved further in order to achieve the goals of company. It is through the preliminary calculations that we can have a reasonable first system estimate. The whole set is then analyzed for performance, cost and mass by competitors benchmarking. In terms of confidentiality, all data is fictional, but viable. The motivation for this study is approach an extracurricular topic, which essence is designing, base of engineering. The results obtained in software and field tests prove the validity of the study and assist in the continuous improvement of product development

Influência de software de otimização de corte no rendimento de serraria da região sudoeste paulista

This study aimed to analyze the increase of yield provided by a software optimization cutting in a pine sawmill, located at southwest region of São Paulo, city of Itapeva. First were measured 10 logs that were processed by conventional sawing system by measuring the volume of products in the process output. Then using a cutting optimization software, that generated cuts diagrams, 10 logs, from 25 to 26 cm diametrical class, were processed by sawing system optimized. For the conventional sawing, the value found to yield was 41.80%, whereas for the unfolding optimized showed the value of 61.79%, resulting in a difference of 19.99%. This study shows that there is room for significant improvement of performance in sawmills sawing with the use of optimization software as the employee at work

Sistema de Gerenciamento de Clínica - “CEAFIR”

Não disponível

Projeto mecânico do sistema de transmissão de um veículo Baja

This study aims to determine the best configuration for the new gearbox of the new Baja´s vehicle from Piratas do Vale team, focusing on the gear train, in order to achieve high performance of it. To this end, first some information about the vehicle is gathered to determine the best pair of gears configuration, then calculations about maximum bending stress, fatigue and surface thereof are performed; ; thereafter static simulations are performed using an a appropriated software. Thus this paper shows a satisfactory design of the addressed, besides providing the Baja SAE team consultation material for future use in the project

Sistema para navegação de robôs móveis e interação humano-robô baseada em comandos de voz

This project is comprised by an interactive mobile robotics’ environment, focused in human-robot interaction. The system was developed to work in a smartphone, with Android operating system, embedded in a small size mobile robot. Information provided by the smartphone’s camera and microp hone, as well as by proximity sensors embedded in the robot, is used as inputs of a control architecture, implemented in software. It is a behavior-based and receptive to human commands control architecture, to assist the robot’s navigation. The robot is controlled by its own behaviors or by commands em it ted by humans

Sistema Gerenciador de Projetos PROEX

Não disponível

Determinação da freqüência natural de eixos utilizando o software excel

This work aims to determine the first natural frequency of rotation shaft by using a basic software, Excel, and to compare it to the values obtained in laboratory. When an axle is submitted to a rotation, depending on the rotational frequency used, the axle can enter a state of resonance, in which the amplitude of vibration becomes rather high. The frequencies in which the resonance is observed depends on several parameters of the axle, including the number of concentrated masses associated to the axle. Thus, to obtain a computer program of easy use and access, which can preview the frequency of resonance of an axle in rotation with ‘n’ numbers of concentrated masses it has been studied how the frequency varies with each of these parameters. The computer program and the analyses have been made using the Rayleigh Method, which allowed the transformation of a continuous system to discrete through the theory of finite elements, which has proved that, the bigger the number of divisions of the shaft taken into consideration in the calculus of the natural frequency, the more this value gets close to the real value. The results obtained have been considered satisfactory once these have gotten close to the theoretical results expected

O uso de software para estudo de seletividade e coordenação

The present work aims to prepare a study of selectivity and coordination in an isolated electrical system with the aid of computer software PTW (Power Tools for Windows). Based on appropriate protection standards, on equipment data and the survey of the curves of “time versus current” (Time Current Curve – TCC), may be defined protection settings to leave the system selective, coordinated and properly protected. Definitions of adjustments are made taking into account the data of, so called, thermal curves of the equipment, which take into account the rated current and the supportability of short-circuit current of the equipment and cables involved in the installation in question. For that we use the tools provided by the PTW in which an industrial electrical circuit is simulated, presenting and discussing the results. With that validates the software PTW, taking it as a great tool helper implementation the coordination and selectivity study

Concepção e Implementação de um Sistema de Controle de Arborização Urbana através da Integração de Softwares Livres e de Código Aberto

Suitable computacional tools allow to build applications that can link information to its physical location, and represent them into visual and interactive schemes, e ectively reaching the power of visual comunication. This leads the user to synthesize information in a simple and e cient way. These applications are linked to the de nition of Geographic Information System (GIS). GIS are comprised by many concepts and tools, which have the main purpose of collecting, storing, viewing and processing spatial data, obtaining the information needed for decision making. Within this context, this paper presents the Conception and Implementation of a Control System for Urban Forestry through Integration of Free and Open Source Software. This conception arose from the need of an Environmental Project developed by the Agriculture's House of the city of Regente Feij o, which has as main objectives cataloging and management of urban a orestation of the municipality. Due to this diversity of concepts, the challenge in building this system is the integration of platforms that are involved in all stages: collecting and storage of data, including maps and other spatial information, operations on the stored information, obtaining results and graphical visualization of the same. After implementation, it was possible to provide for the system users an improvement in the capacity of perception in the information analysis and facilitate the process of decision making

O aprimoramento de um software de estúdio virtual por meio de técnicas de matting digital e registro de objetos virtuais

A virtual studio system can use technologies as augmented reality and digital matting to decrease production costs at the same time it provides the same resources of a conventional studio. With this, it’s possible for the current studios, with low cost and using conventional devices, to create productions with greater image quality and effects. Some difficulties are recurrent in virtual studio applications that use augmented reality and digital matting. The virtual objects registration in augmented reality techniques suffer from problems caused by optical distortions in the camera, errors in the marker tracking system, lack of calibration on the equipments or on the environment (lighting, for example), or even by delays in the virtual objects display. On the other hand, the digital matting’s main problem is the real-time execution to preview the scene, which must have optimized processing speed at the same time while maintain the best image quality possible. Taking the given context into consideration, this work aims to give continuity to a virtual studio system called ARStudio, by enhancing digital matting, virtual objects registration and introducing a segmentation based on depth map, yet adding better control over functionalities previously implemented

Apoio à gerência de requisitos de software utilizando Design Rationale

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um sistema para navegação de robôs móveis por caminhos em plantações

The use of mobile robots in the agriculture turns out to be interesting in tasks of cultivation and application of pesticides in minute quantities to reduce environmental pollution. In this paper we present the development of a system to control an autonomous mobile robot navigation through tracks in plantations. Track images are used to control robot direction by preprocessing them to extract image features, and then submitting such characteristic features to a support vector machine to find out the most appropriate route. As the overall goal of the project to which this work is connected is the robot control in real time, the system will be embedded onto a hardware platform. However, in this paper we report the software implementation of a support vector machine, which so far presented around 93% accuracy in predicting the appropriate route.

Sistema de automação residencial controlado via rede doméstica

The present work develops a residential automation system controlled by PIC microcontroller connected to a domestic network using the TCP/IP protocol. This was motivated by the viability of building an automation system to control basic elements of a house with low cost, which cannot be found nowadays. Initially is presented a brief history of the automation systems and an introduction about PIC microcontrollers. Afterwards is presented an overview of the system to be implemented. Then it is shown a suggested circuit and the sensor and actuator elements as well as the software to manage the system, this was all build and test in the laboratory. In the end are the results obtained from the prototype, like the energy consumption, the cost, efficiency and reliability