Drying kinetics of jatropha seeds

Given the necessity of developing jatropha cultivation equipment, this work adjusted different mathematical models to experimental data obtained from the drying of jatropha seeds submitted to different drying conditions and selected the best model to describe the drying process. The experiment was carried out at the Federal Institute of Goiás - Rio Verde Campus. Seeds with initial moisture content of approximately 0.50 (kg water/kg dry matter) were dried in a forced air-ventilated oven, at temperatures of 45, 60, 75, 90 and 105°C to moisture content of 0.10 ± 0.005 (kg water/kg dry matter). The experimental data were adjusted to 11 mathematical models to represent the drying process of agricultural products. The models were compared using the coefficient of determination, chi-square test, relative mean error, estimated mean error and residual distribution. It was found that the increase in the air temperature caused a reduction in the drying time of seeds. The models Midilli and Two Terms were suitable to represent the drying process of Jatropha seeds and between them the use of the Midili model is recommended due to its greater simplicity.

Nitrogen fertilizer (15N) leaching in a central pivot fertigated coffee crop

Nitrogen has a complex dynamics in the soil-plant-atmosphere system. N fertilizers are subject to chemical and microbial transformations in soils that can result in significant losses. Considering the cost of fertilizers, the adoption of good management practices like fertigation could improve the N use efficiency by crops. Water balances (WB) were applied to evaluate fertilizer N leaching using 15N labeled urea in west Bahia, Brazil. Three scenarios (2008/2009) were established: i) rainfall + irrigation the full year, ii) rainfall only; and iii) rainfall + irrigation only in the dry season. The water excess was considered equal to the deep drainage for the very flat area (runoff = 0) with a water table located several meters below soil surface (capillary rise = 0). The control volume for water balance calculations was the 0 - 1 m soil layer, considering that it involves the active root system. The water drained below 1 m was used to estimate fertilizer N leaching losses. WB calculations used the mathematic model of Penman-Monteith for evapotranspiration, considering the crop coefficient equal to unity. The high N application rate associated to the high rainfall plus irrigation was found to be the main cause for leaching, which values were 14.7 and 104.5 kg ha-1 for the rates 400 and 800 kg ha-1 of N, corresponding to 3.7 and 13.1 % of the applied fertilizer, respectively.

Genetic diversity in sugar apple (Annona squamosa L.) by using RAPD markers

Genetic diversity in a collection of 64 sugar apple accessions collected from different municipalities in northern Minas Gerais was assessed by RAPD analysis. Using 20 selected RAPD primers 167 fragments were generated, of which 48 were polymorphic (28.7%) producing an average of 2.4 polymorphic fragments per primer. Low percentage of polymorphism (< 29%) was observed by using the set of primers indicating low level of genetic variation among the 64 accessions evaluated. Genetic relationships were estimated using Jaccard's coefficient of similarity. Accessions from different municipalities clustered together indicating no correlation between molecular grouping and geographical origin. The dendrogram revealed five clusters. The first cluster grouped C19 and G29 accessions collected from the municipalities of Verdelândia and Monte Azul, respectively. The second cluster grouped G16 and B11 accessions collected from the municipalities of Monte Azul and Coração de Jesus, respectively. The remaining accessions were grouped in three clusters, with 8, 15 and 37 accessions, respectively. In summary, RAPD showed a low percentage of polymorphism in the germplasm collection.

Real-time hand tracking for rehabilitation and character animation

Hand and finger tracking has a major importance in healthcare, for rehabilitation of hand function required due to a neurological disorder, and in virtual environment applications, like characters animation for on-line games or movies. Current solutions consist mostly of motion tracking gloves with embedded resistive bend sensors that most often suffer from signal drift, sensor saturation, sensor displacement and complex calibration procedures. More advanced solutions provide better tracking stability, but at the expense of a higher cost. The proposed solution aims to provide the required precision, stability and feasibility through the combination of eleven inertial measurements units (IMUs). Each unit captures the spatial orientation of the attached body. To fully capture the hand movement, each finger encompasses two units (at the proximal and distal phalanges), plus one unit at the back of the hand. The proposed glove was validated in two distinct steps: a) evaluation of the sensors’ accuracy and stability over time; b) evaluation of the bending trajectories during usual finger flexion tasks based on the intra-class correlation coefficient (ICC). Results revealed that the glove was sensitive mainly to magnetic field distortions and sensors tuning. The inclusion of a hard and soft iron correction algorithm and accelerometer and gyro drift and temperature compensation methods provided increased stability and precision. Finger trajectories evaluation yielded high ICC values with an overall reliability within application’s satisfying limits. The developed low cost system provides a straightforward calibration and usability, qualifying the device for hand and finger tracking in healthcare and animation industries.

Environmental performance of aquaculture in Rondônia state, Brazil

The objective of this study was to analyze the environmental performance of aquaculture in the city of Colorado do Oeste, Rondônia State, Brazil. Fifteen fish farmers were interviewed. For data collection, structured interviews were carried out, using a questionnaire based on information supplied by the United Nations Food and Agriculture Organization (FAO). The questionnaire considered 12 items, organized into three main topics: a) social and legal standards b) environmental standards c) standards of food safety and hygiene. The questionnaire considered 12 items, organized into three main topics: a) social and legal standards b) environmental standards c) standards of food safety and hygiene. Aquaculture in the city of Colorado do Oeste, Rondônia presents two fish production systems: extensive and semi-intensive. In the semi-intensive system, stocking rate was one fish per m3, on average; tambaqui (Colossoma macropomum), tilapias (Oreochromis spp.), pirarucu (Arapaima gigas) and pintado (Pseudoplatystoma spp.) were the species farmed at the largest number. The rate of water renewal was due to the greater availability of natural food in this system. Water renewal was constant in the ponds (1,500 liters per minute). In the semi-intensive system using dug ponds, alevins were stocked and fed during the entire rearing time with natural and exogenous food. The extensive system relied on the natural production of the pond, with stocking density limited by the production of natural food. The little renewal of water made the cultivation tank itself acted as a decantation lake, with the occurrence of oxidation and sedimentation of residual organic matter, consisting of feces, debris and organic fertilizer. Production of reduced effluent volume took place in the extensive system, compared to the cultivation area. In addition, there was high water turbidity, caused by high concentration of planktonic organisms, and low concentrations of dissolved oxygen in the water. Data showed that nine estates of the interviewed fish farmers had critical environmental performance (less than 30.0%). Six estates of fish farmers had bad environmental performance (between 30.0 and 50.0%) (Coefficient of sustentainability = green square x 100 ÷ Total Questions less the yellow squares)

Growth and physiological characteristics of the weed false johnsongrass ( Sorghum arundinaceum (Desv.) Stapf)

ABSTRACT Sorghum arundinaceum (Desv.) Stapf is a weed that belongs to the Poaceae family and is widespread throughout Brazil. Despite the frequent occurrence, infesting cultivated areas, there is little research concerning the biology and physiology of this species. The objective of this research was to evaluate the growth, carbon partitioning and physiological characteristics of the weed Sorghum arundinaceum in greenhouse. Plants were collected at regular intervals of seven days, from 22 to 113 days after transplanting (DAT). In each sample, we determined plant height, root volume, leaf area and dry matter, and subsequently we perfomed the growth analysis, we have determined the dry matter partitioning among organs, the accumulation of dry matter, the specific leaf area, the relative growth rate and leaf weight ratio. At 36, 78 and 113 DAT, the photosynthetic and transpiration rates, stomatal conductance, CO2 concentration and chlorophyll fluorescence were evaluated. The Sorghum arundinaceum reached 1.91 in height, with slow initial growth and allocated much of the biomass in the roots. The photosynthetic rate and the maximum quantum yield of FSII are similar throughout the growth cycle. At maturity the Sorghum arundinaceum presents higher values of transpiration rate, stomatal conductance and non-photochemical quenching coefficient (NPQ).

Semi-automatic 3D Segmentation Of Costal Cartilage In CT Data From Pectus Excavatum Patients

One of the current frontiers in the clinical management of Pectus Excavatum (PE) patients is the prediction of the surgical outcome prior to the intervention. This can be done through computerized simulation of the Nuss procedure, which requires an anatomically correct representation of the costal cartilage. To this end, we take advantage of the costal cartilage tubular structure to detect it through multi-scale vesselness filtering. This information is then used in an interactive 2D initialization procedure which uses anatomical maximum intensity projections of 3D vesselness feature images to efficiently initialize the 3D segmentation process. We identify the cartilage tissue centerlines in these projected 2D images using a livewire approach. We finally refine the 3D cartilage surface through region-based sparse field level-sets. We have tested the proposed algorithm in 6 noncontrast CT datasets from PE patients. A good segmentation performance was found against reference manual contouring, with an average Dice coefficient of 0.75±0.04 and an average mean surface distance of 1.69±0.30mm. The proposed method requires roughly 1 minute for the interactive initialization step, which can positively contribute to an extended use of this tool in clinical practice, since current manual delineation of the costal cartilage can take up to an hour.

Assessment and prediction of asthma and its severity in the pediatric community

Seventy four asthmatic children aged 7 to 11 years were examined along with controls matched by age and sex. Clinical and laboratory investigations preceded a 28-day follow-up where data about morning and evening peak expiratory flow rate (PEF), symptoms and treatment were recorded. The coefficient of variation of PEF was found to be an objective measurement of asthma severity that has statistically significant correlation with both symptoms (r s= .36) and treatment (r s= .60). Moreover, it separates mild and severe asthmatics, as confirmed by statistically significant differences (p= .008 or less) in symptoms, treatment, skin allergy and airways response to exercise. Skin allergy and airways responsiveness to exercise were found to be predictors of both disease and severity. By means of logistic regression analysis it was possible to establish the probabilities for both asthma and severe asthma when children presenting and not presenting these characteristics are compared. One single positive skin test represent a probability of 88% for the development of asthma and a probability of 70% for severe disease. A PEF reduction of 10% after an exercise test implies a probability of 73% for disease and a probability of 64% for severe disease. Increases in these variables imply geometrically increased risks and their presence together have a multiplicative effect in the final risk.

Mathematical modelling of supercritical CO2 extraction of volatile oils from aromatic plants

The modelling of the experimental data of the extraction of the volatile oil from six aromatic plants (coriander, fennel, savoury, winter savoury, cotton lavender and thyme) was performed using five mathematical models, based on differential mass balances. In all cases the extraction was internal diffusion controlled and the internal mass transfer coefficienty (k(s)) have been found to change with pressure, temperature and particle size. For fennel, savoury and cotton lavender, the external mass transfer and the equilibrium phase also influenced the second extraction period, since k(s) changed with the tested flow rates. In general, the axial dispersion coefficient could be neglected for the conditions studied, since Peclet numbers were high. On the other hand, the solute-matrix interaction had to be considered in order to ensure a satisfactory description of the experimental data.

Smoking, consumption of alcohol and sedentary life style in population grouping and their relationships with lipemic disorders

The study, part of the project "Atherosclerotic cardiovascular diseases, lipemic disorders, hypertension, obesity and diabetis mellitus in a population of the metropolitan area of the southeastern region of Brazil", had the following objectives: a) the characterization and distribution among typical human socio-economic groupings, of the prevalence of some particular habits which constitute aspects of life-style-the use of tobacco, the use of alcohol and sedentary activity; b) the establishment of the interrelation between the above-mentioned habits and some lipemic disorders. The prevalence of the habits cited behaved in the following manner: the use of tobacco predominated among men, distributed uniformly throughout the social strata; among the women the average percentage of smokers was 18,9%, a significant difference occurring among the highest socio-economic class, where the average was of 40.2%. The sedentary style of life presented high prevalence, among both men and women with exception of the women of the highest socio-economic level and of the skilled working class. The use of alcohol, as one would expect, is a habit basically practised by the men, without any statistically significant differences between classes. For the purpose of establishing associations between these risk fictors and lipemic conditions four situations were chosen, of the following characteristics: 1- total cholesterol > or = 220 mg/dl and triglycerides > or = 150 mg/dl; 2- HDL cholesterol <35 mg/dl for men and <45 mg/dl for women and triglycerides levels > or = 150 mg/dl; 3- HDL cholesterol <35 mg/dl for men and <45 mg/dl for women and triglycerides levels <150 mg/dl; 4- total cholesterol 220 mg/dl with triglycerides levels <150 mg/dl. Six models of multiple (backward) regression were established, with seven independent variables- age, sex, use of tobacco, consumption of alcohol, light physical activity, hypertension and obesity. Significant associations (P<0,05) were revealed with hypercholesterolemia, accompanied by triglyceride levels > or = 150 mg/dl, and the following independent variables: age, use of tobacco and the interactions between obesity and smoking, age and sedentary lifestyle, sex and obesity (R2=22%); the standardized B coefficient showed that the variables with the greatest weight in the forecasting of the variation in the levels of cholesterol were smoking and the interaction between obesity and smoking. The hypercholesterolemia accompanied by triglycerides levels <150 mg/dl showed a positive association between total cholesterol and sex and the interactions obesity/smoking and sex/obesity. As regards HDL cholesterol accompanied by triglyceride/ levels > or = 150 mg/dl was inversely associated with obesity and the interaction smoking/ age and directly with age (R=31%). The standardized B coeffients, indicated that the variables obesity and the interactions smoking/age possessed a weight three times greater than age alone in accounting for the variation in the serum levels of HDL cholesterol. When accompanied by triglycerides <150 mg/dl there was no association between and the independent variables and the set of them presented R equal to 22%. The sum of top, in the population stutied in this project, the component habits of life-style (smoking, alcohol consumption and sedentary activity) which constitute risk factors which determine morbidity from atherosclerotic cardiovascular diseases are be found distributed through all the typical social groupings of this particular form of social organization. On the other hand, the seven independent variables used in the multiple regression models for the explanation of the lipemic conditions considered presented multiple determination coefficients which varied, approximately, between 20% and 30%. Thus it is important that in the genetic epidemiology the study of the morbidities in question be emphasized.

Mortality from asthma in the state of S. Paulo, Brazil (1970-1992)

Mortality from asthma has shown important variations over time in several countries. In Brazil, a mortality study performed in the 60s, covering the cities of S.Paulo and Ribeirão Preto, and other ten cities showed that S.Paulo presented the lowest death rate from asthma among of them all. It was decided to study the time trends of deaths from asthma and from the whole set of respiratory diseases from 1970 to 1992, in the population aged 15-34 yrs. old in the State of S.Paulo, as well as to compare them with those of other countries. Asthma mortality rates during the 23 years of observation since 1975, showed an oscillatory declining pattern with a peak of deaths in the initial years. The linearization of the curve allows the calculation of Pearson's correlation coefficient that was significantly negative, suggesting a decline in the mortality over this period, mainly in the 5-9 yrs. old and 30-34 yrs. old strata. The segmentation of data between the period of ICD-9, 1970 to 1978, and of ICD-9, 1979 and subsequent years, shows that there is stability within each period, in all age-groups, except for that of 5-9 yr. olds between 1970-1978. Comparing the rates of the population aged 15-34 yrs. old for the State of S. Paulo, Brazil, with trends observed in 14 other countries, an intermediate pattern for the first triennial period (1970-1972) as well as for the subsequent triennial periods, emerges. A prevalence study of asthma, a follow up program meant for using emergency rooms and a surveillance of deaths due to all respiratory diseases and specifically to asthma are strongly recommended.

Projecto de execução de fundações e estruturas de uma ponte em betão armado pré-esforçado

Este Trabalho refere-se ao Projecto de Execução de Fundações e Estruturas de uma Ponte Rodoviária em betão armado pré-esforçado, realizado no âmbito do Trabalho Final de Mestrado em Engenharia Civil – Especialização em Estruturas, do Instituto Superior de Engenharia de Lisboa. O Projecto de Execução é composto de Peças Escritas e Peças Desenhadas. Nas Peças Escritas estão incluídos: Memória Justificativa e Descritiva; Cálculos Justificativos e Anexos. A ponte é composta por dois tabuleiros paralelos com 10,28m de largura cada um e afastados entre si de 0,10m. A obra é constituída de 8 tramos; os tramos correntes com 31m de comprimento e os tramos extremos com 25 e 20m de comprimento, perfazendo um comprimento total de 231m. A obra foi parcialmente isolada dos sismos pela introdução, em todos os pilares, de aparelhos de apoio de elevado amortecimento sísmico do tipo HDRB (High Damping Rubber Bearings). Encontram-se particularmente discriminadas e detalhadas neste projecto as seguintes situações: - Cálculo do Pré-esforço e respectivas perdas; - Acção das sobrecargas rodoviárias; - Diferença de comportamento da obra na entrada em serviço e no longo prazo; - Análise sísmica e do isolamento sísmico; - Estudo dos efeitos diferidos: retracção e fluência. Tendo as abordagens de cálculo e as verificações de segurança seguido a regulamentação nacional em vigor, nomeadamente RSA e REBAP, foi no entanto feita uma aproximação às regras do “Capacity Design” previstas no EC8, em que se privilegia a actuação do projectista sobre o comportamento da estrutura, procurando uma resposta não linear da mesma, visando garantir que: - A rotura não ocorrerá nos elementos de fundação; - Nos pilares a dissipação de energia se faz através de rótulas plásticas, evitando-se roturas associadas a esforços transversos. A aplicação destas regras neste Projecto demonstrou haver um agravamento substancial na definição dos esforços a que devem resistir alguns dos componentes da estrutura, designadamente os pilares e as fundações, originando soluções de secções de betão e armaduras bem mais exigentes do que aqueles que resultariam da simples verificação de segurança, pela comparação entre esforços actuante e esforços resistentes “secção a secção”, imposta pela actual regulamentação nacional.

Medição do coeficiente de atrito da superfície de pavimentos: estudo do equipamento Grip Tester

Ao nível da segurança de circulação rodoviária e aeroportuária, a aderência entre os pneumáticos e a superfície do pavimento apresenta-se como uma das características superficiais mais importantes dos pavimentos em situações de piso molhado. Mundialmente, tem-se dado relevante importância a este facto, levando a que nas últimas décadas e anos, se tenham estudado diversos índices e equipamentos de medição do coeficiente de atrito de um dado pavimento aquando da presença de água. O objectivo da presente dissertação é o de aprofundar o conhecimento sobre a medição do coeficiente de atrito da superfície dos pavimentos de infraestruturas rodoviárias e aeroportuárias, com a particular incidência no estudo do equipamento GripTester. O trabalho realizado consistiu principalmente na análise de valores do coeficiente de atrito da camada de desgaste medidos no pavimento de um aeródromo, por três equipamentos GripTester, através de um ensaio de comparação interlaboratorial que foi organizado especificamente no âmbito desta dissertação. O trabalho desenvolvido permitiu concluir que foi importante desenvolver este estudo comparativo. Com efeito, a análise dos resultados do ensaio de comparação interlaboratorial mostrou que há diferenças no desempenho dos equipamentos participantes, que interessa aprofundar em estudos comparativos futuros.

Evaluation and additional recommendations for preparing a whole blood control material

OBJECTIVE: The assessment of an easy to prepare and low cost control material for Hematology, available for manual and automated methods. MATERIAL AND METHOD: Aliquots of stabilized whole blood were prepared by partial fixation with aldehydes; the stability at different temperatures (4. 20 and 37 °C) during periods of up to 8-9 weeks and aliquot variability with both methods were controlled. RESULTS: Aliquot variability with automated methods at day 1, expressed as CV% (coefficient of variation) was: white blood cells (WBC) 2.7, red blood cells (RBC) 0.7, hemoglobin (Hb) 0.6, hematocrit (Hct) 0.7, mean cell volume (MCV) 0.3, mean cell hemoglobin (MCH) 0.6, mean cell hemoglobin concentration (MCHC) 0.7, and platelets (PLT) 4.6. The CV (coefficient of variation) percentages obtained with manual methods in one of the batches were: WBC 23, Hct 2.8, Hb 4.5, MCHC 5.9, PLT 41. Samples stored at 4ºC and 20ºC showed good stability, only a very low initial hemolysis being observed, whereas those stored at 37ºC deteriobed a rapidly (metahemoglobin formation, aggregation of WBC and platelets, as well as alteration of erythrocyte indexes). CONCLUSIONS: It was confirmed that, as long as there is no exposure to high temperatures during distribution, this material is stable, allowing assessment, both esternal and internal, for control purposes, with acceptable reproductivity, both for manual and auttomatic methods.

Manual de utilização e manutenção de edifício

A manutenção periódica dos edifícios deve ser encarada como uma prática sustentável pois permite aumentar a vida útil dos edifícios e, consequentemente, a redução do consumo de recursos naturais e a criação de resíduos na indústria da construção. Não existe em Portugal uma prática corrente de manutenção programada e integral dos edifícios, especialmente dos pequenos edifícios de habitação. Pretende-se, com este trabalho de projecto, desenvolver um exemplo prático de manual de utilização e manutenção de um edifício de habitação unifamiliar. Primeiro, serão referenciados e caracterizados casos concretos, nacionais e internacionais, de manuais de utilização de edifícios com o respectivo enquadramento. Serão apresentados os projectos de licenciamento do edifício e elaborados planos complementares para identificação de órgãos e sistemas específicos, não previstos nos projectos de licenciamento. Será definida a durabilidade de cada material e elemento de construção, de forma a elaborar um plano de manutenção e substituição dos diversos elementos ao longo da vida útil do edifício. Serão determinadas as tarefas de manutenção periódica e o respectivo custo, que permitirá definir o custo total de manutenção e substituição de elementos ao longo da vida útil do edifício. Serão identificados os pontos críticos em termos de manutenção e os cuidados de segurança na utilização do edifício.