Multifunctional rare earth organic corrosion inhibitors

All rights reserved.Chromium (VI) compounds are commonly used in paint systems to provide corrosion protection, particularly for aerospace alloys. These compounds are toxic, carcinogenic and environmentally detrimental, therefore alternatives that are safe, environmentally benign and meet or exceed current levels of corrosion protection are vital. Multifunctional rare earth organic compounds incorporate known inhibitor species, achieving synergistic inhibition in corrosive environments. The mechanism, efficiency and surface interactions of these complexes are explored. The complexes were effective inhibitors for steel and aluminium alloys, through mixed inhibition. Advantages and limitations of these inhibitor complexes, along with applications and future research direction, are discussed.

Rare earth-based corrosion inhibitors

Corrosion inhibitors are an important method for minimizing corrosion; however traditional inhibitors such as chromates pose environmental problems. Rare earth metals provide an important, environmentally-friendly alternative. This book provides a comprehensive review of current research and examines how rare earth metals can be used to prevent corrosion and applied to protect metals in such industries as aerospace and construction. Chapter 1 begins by examining the important need to replace chromate, and then goes on to discuss the chemistry of the rare earth metals and their related compounds. Chapter 2 considers the techniques that can be used to identify corrosion inhibition mechanisms and to test the levels of protection offered to different metals by rare earth compounds. Subsequent chapters consider in more detail how rare earth elements can be used as corrosion inhibitors in different forms and for different metals. This includes discussion on the potential of rare earth elements for self-healing, tunable and multifunctional coatings. Finally, chapter 10 considers the cost and availability of the rare earths and the potential health and environmental risks associated with extracting them. Provides a review of current research and examines how rare earth metals can be used to prevent corrosion and applied to protect metals in such industries as aerospace and construction. Includes discussion on the potential of rare earth elements for self-healing, tunable and multifunctional coatings. Considers the cost and availability of the rare earths and the potential health and environmental risks associated with extracting them.

Thermodynamic Analysis of Rare Earth Chlorination and Bromination Processes

Research funded by the Army Research Laboratory (ARL), the Metallurgical and Materials Engineering Department at Montana Tech investigated various methods of extracting and refining rare earth elements (REEs) from mineral ores and concentrates. Extensive thermodynamic, thermogravimetric and differential thermal analyses were performed to evaluate the relative stabilities of various REE compounds in order to assess potential methods for selective separation and recovery of specific REEs. Conversion of rare earth oxides (REO) to rare earth chlorides or bromides is a possible initial step in pyrometallurgical and hydrometallurgical processing of REEs. REO can be converted to chlorides or bromides by roasting in the presence of a chloridizing or bromidizing reactant. (e.g. NH4Cl and NH4Br).

Determination of rare earth elements in geological samples using the agilent SVDV ICP-OES.

2016

掺稀土离子液体激光器的研究进展

综合介绍了掺稀土离子液体激光器的主要发展历程，分析了掺稀土离子液体激光材料研究过程中需要解决的主要问题包括降低无辐射跃迁、增大溶解度和减少热致折射率梯度引起的光偏折损耗等。重点介绍了稀土离子在溶液中的无辐射跃迁机理以及降低无辐射跃迁的措施。

Near infrared broadband emission from bismuth-dysprosium codoped chalcohalide glasses

We investigate the broadband infrared emission of bismuth doped and bismuth/dysprosium codoped chalcohalide glasses. It is found that the bismuth/dysprosium codoping can drastically enhance the fluorescence as compared with either bismuth or dysprosium doped glasses. Meanwhile, the full width at half maximum of bismuth/dysprosium codoped glasses is over 170 nm, which is the largest value among all the reported rare-earth doped chalcohalide glasses. An ideal way for energy consumption between bismuth and dysprosium ions is supposed. Such improved gain spectra of both bismuth and dysprosium ions may have potential applications in developing broadband fibre amplifiers.

Intense frequency upconversion fluorescence of Er3+/Yb3+-codoped novel potassium-barium-strontium-lead-bismuth glasses

Er3+/Yb3+-codoped potassium-barium-strontium-lead-bismuth glasses for developing potential upconversion lasers have been fabricated and characterized. Based on the results of energy transfer efficiency, the optimal Yb3+/Er3+ concentration ratio is found to be 5:1. Intense green and red emissions centered at 525, 546, and 657 run, corresponding to the transitions H-2(11/2) -> I-4(15/2), S-4(3/2) -> I-4(15/2), and F-4(9/2) -> I-4(15/2), respectively, were observed. The quadratic dependence of the 525, 546, and 657 nm emissions on excitation power indicates that a two-photon absorption process occurs under 975 nm excitation. The long-lived I-4(11/2) level is supposed to serve as the intermediate state responsible for the upconversion processes. (c) 2004 Elsevier B.V. All rights reserved.

稀土掺杂氧卤玻璃光谱性质研究(英文)

本研究主要目的在于探索适用于宽带光纤放大器和蓝绿光激光器用稀土掺杂基质玻璃材料．通过对掺Er^3＋重金属氧氟玻璃的光谱性质和析晶稳定性研究以及稀土离子掺杂重金属氧卤玻璃的上转换发光研究，为其在宽带掺Er^3＋光纤放大器和蓝绿光波段激光器中的潜在应用提供基础．研究结果表明：重金属PbF2的加入提高了掺Er^3＋硅酸盐玻璃和锗酸盐玻璃的带宽特性和增益性能；首次在Er^3＋／Yb^3＋共掺和Er^3＋单掺硅酸盐玻璃发现上转换蓝光；重金属氟化铅的加入提高了Er^3＋单掺锗酸盐和碲酸盐玻璃的上转换发光；在室温下同时

Nanotube-based passively mode-locked Ytterbium-pumped Raman laser

Over the past decades mode-locked fibre lasers have been extensively refined and developed, with most research efforts focussing on employing rare-earth doped fibres as the active elements [1]. This presents the problem that operation is limited to regions of the spectrum where such elements exhibit gain [1]. Raman amplification in silica fibre is an attractive way to overcome this spectral limitation, with gain available across the entire transparency window (300 nm - 2300 nm) [2-4]. There have been a number of reports utilising Raman gain in ultrashort pulse sources [2-4], however none using a broadband saturable absorber, such as carbon nanotubes [5-7] and graphene [7-9]. A broadband saturable absorber is an essential pre-requisite in order to fully exploit the wavelength flexibility provided by the Raman gain in short pulse mode-locked fiber lasers. © 2011 IEEE.

A New Technique for Side Pumping of Double-Clad Fiber Lasers

We report a new technique, called SAP, for side pumping of double-clad, rare-earth-doped fiber lasers using fiber-coupled pump sources. The highest coupling efficiency can even exceed 92% in theory with this structure.

合成方法对几种稀土发光材料的形貌及发光性能的影响

分别采用喷雾热解法、溶胶-凝胶法、共沉淀法和固相法合成了Y<,3>Al<,5>O<,12>:Eu<'3+>发光粉,并且比较了不同方法制备的发光粉的结晶过程和发光性质.通过比较我们发现,与其他三种方法相比,喷雾热解法结晶温度低、合成的发光粉具有球形形貌、且发光强度较大,是一种比较理想的合成发光粉的方法.

稀土掺杂长余辉发光玻璃的研究

稀土掺杂的长余辉发光玻璃是一种新型的发光材料，其应用范围可以从传统的弱光照明领域延伸到信息存储领域。我们在探找新型的长余辉发光玻璃体系的过程中，总结了一些设计长余辉玻璃材料的方法，研究了稀土离子在玻璃基质中的发光行为和斓系离子与材料中缺陷的作用。我们在论文中首次报道了稀土掺杂的碱土硼硅酸盐玻璃的长余辉发光和光激励长余辉发光现象。试激活的碱土硼硅酸盐玻璃（Ro-BZO3-5102：TbZo3，R＝Mg，ca，s几B。）在254 nm紫外光辐照30 min以后，余辉时间长达6-10个小时。将激发后的玻璃避光保存24小时至余辉消失后，再使用低能量的366 nm的紫外光檄发样品，玻璃会重新发射长余辉，即产生光激励长余辉发光；而未预先经254 nm紫外光辐照的玻璃没有光激励长余辉现象发生。在这一体系中，光激励长余辉的衰减与首次激发的长余辉的衰减具有不同的衰减规律，辅以吸收光谱和热释光谱的表征，我们对其发光的机理进行了探讨。我们还研究了三价稀土离子在碱土硼硅酸盐玻璃中的发光性质，以及共掺稀土和其他金属离子对试激活的碱土硼硅酸盐玻璃荧光和长余辉发光的影响。此外1本论文还首次报道了Du3+，Tm+和Zr4+等离子在玻璃中的长余辉发光现象。

氟化物无机纳米粒子的制备及其稀土掺杂体系的光谱性质

对于纳米复合材料来说，首要解决的问题就是光散射。光散射现象主要是粒子尺寸以及粒子与基质材料折射率的差异引起的。对于小粒子（＜25nm），纳米粒子与基质材料之间的折射率差异不会造成明显的光散射现象，但对于较大粒子来说，为避免明显的光散射现象的发生，二者之间的折射必须吻合。由瑞利散射公式计算得知，当粒子直径大到100nm时，粒子与基质之间的折射率差值必须在0.02之内。因此，解决复合材料光散射问题有两种途径：尽量减小纳米粒子尺寸；选择折射率匹配良好的氟化物和聚合物分别作光学活性组分的基质和材料的基底材料。由于微乳液法合成纳米粒子条件温和、设备简单，所合成纳米粒子尺寸可控。本文首先研究了微乳液结构和性质，采用微乳液法合成氟化物纳米粒子，并研究了其稀土掺杂体系的光学性质。对于微乳液结构和性质的研究，本文绘制了十六烷基三甲基嗅化钱（CTAB）／正丁醇（n-C_4H_9OH）／正辛烷（n-C_8H_(18)）／水（或NH4F溶液、或Ba(NO_3)_2溶液、或KNO_3-Mg(NO_3)_2混合溶液）四组分微乳体系的三元相图，观察了电导率随水（或豁溶液）含量变化的规律，很好地印证了微乳液体系的相行为。实验发现，在这四个四元体系的相图中，Ba(NO_3)_2溶液体系的油包水区域面积最大，纯水体系水包油微乳区面积最小，我们分析认为水包油微乳区面积的变化是由于体系中加入离子后对表面活性剂阳离子的静电作用所引起的。采用十六烷基三甲基澳化按（CTAB）／正丁醇／正辛烷／水体系合成了KMgF_3以及KMgF_3:Eu~(2+)纳米粒子。XRD分析表明所合成纳米粒子为立方KMgF_3单相；环境扫描电子显微镜（ESEM）分析得到所合成KMgF_3:Eu~(2+)纳米粒子粒径约为20nm。KMgF_3:Eu~(2+)纳米粒子光谱研究发现其发射峰位于360nm附近，其激发峰位于250nm附近，较KMgF_3:Eu~(2+)单晶的激发峰峰蓝移了约80nm。对KMgF_3:Eu~(2+)纳米粒子激发峰蓝移的机理进行了初步探讨。采用CTAB/2-丁醇／水微乳体系合成出球形BaF_2纳米粒子，XRD和ICP数据显示样品为纯BaF_2相；FTIR谱图证明体系中没有有机物质的存在。将由纳米粒子分散到水中所形成的胶体滴到铜网上，干燥后发现所合成粒子有自组装的特性摘要且粒子自组装形状因粒子尺寸以及样品制备过程而异。粒子的自组装完全是自发的，没有任何的化学试剂对粒子进行包覆，也没对粒子施加除超声分散之外的任何外力。当将一滴胶体溶液直接滴到铜网上，干燥后我们得到粒子的圆形自组装，较大粒子分布在外围形成一个圆，较小粒子分布在圆的内部形成环；我们将一滴BaF_2纳米粒子胶体溶液滴加到铜网上，待干燥后滴加第二滴，重复此操作两次，这样铜网上共滴加的胶体溶液为3滴，此时我们得到粒子的双平行线型组装；直接滴加3滴BaF_2纳米粒子胶体溶液到铜网上，干燥后得粒子的桶状自组装。采用CTAB／正丁醇／正辛烷／水体系于35℃下合成带有枝晶的BaF_2纳米立方。这些枝晶生长在纳米立方的两个相邻面之间呈片状弧形。粉末XRD分析表明，体系为BaF_2单相且结晶良好；用扫描电子显微镜（SEM）对粒子进行分析发现，所得纳米立方边长为400-450nm；FTIR分析表明，经处理后样品中没有有机物质残存；对枝晶的能谱分析（EDS）分析表明，枝晶中只有Ba和F两种元素而未发现C元素存在。这说明，立方上所生长的枝晶为纯BaF_2产物而非有机物质所形成的。试验发现，所合成粒子的尺寸和形状依赖于反应温度和反应时间。采用士一述体系，于25℃下反应，可得到横截面边长40nm，长200nm的立方柱状纳米粒子，并且未见枝晶。从不同反应时间所合成粒子的形状上我们可以估计纳米立方以及枝晶的住：长过程。采用CTAB／正丁醇／正辛烷／水体系首次合成了BaF_2:Er纳米粒子，并研究了掺杂浓度对粒子红外发光的影响，XRD分析表明所合成BaF_2:Er纳米粒子为BaF_2立方相，物相纯净，结晶良好；TEM分析表明在掺杂浓度为6mol％时，粒子尺寸为15-20nm，士曾大粒子的掺杂浓度（8，10和12mol％）下，其尺寸和形状无明显改变，但粒子团聚现象严重。粒子在氢离子激光器488nm激发下的荧光（PL）光谱显示，随粒子掺杂浓度的增大，其发光强度增强，半峰宽加宽。研究了BoF_2:Er纳米粒子尺寸对其发光强度的影响，通过调节体系中水含量以达到控制粒子尺寸的目的。在体系中水含量。分别为5，8，15的条件「分别合成出平均粒径约为8，10和20.5nm的粒子。从粒子的激光粒度分布图中我们可得到粒子的平均尺寸。从粒子的XRD图中我们可以发现，随粒子粒径的减小，粉末的衍射峰出现偏移的情况。对于不同种纳米粒子，粒子粒径越小，衍射峰偏移越严重；对于相同的粒子，衍射角度越大，衍射峰偏移的越严重。从三种粒子的红峰的半峰宽和有效半峰宽越宽，对于8nm粒径的粒子，我们得到其最大半峰宽为145nm或有效半峰宽173nm。而且随粒子粒径的减小，其发射峰出现红移的现象。采用CTAB／正丁醇／正辛烷／水体系首次合成了CeF_3以及掺杂浓度为17，25，30，42和50mol％的CeF_3:Lu纳米粒子。XRD分析表明，所合成纳米粒子为CeF_3六角相，物相纯净，结晶良好，即使在高的掺杂浓度下（50mol％）体系中一也无其他杂质相的存在。环境扫描电子显微镜（ESEM-FEG）分析表明，所合成CeF_3纳米粒子粒径为巧一20nm，Lu的掺入对粒子的形状和尺寸影响不明显，但在较高的掺杂浓度下粒子团聚现象严重。粒子的荧光光谱表明，CeF_3以及Lu：CeF_3纳米粒子在254nm的激发波长下的发射光谱从290nm到400nm的宽带发射，发射峰位于325nm，较单晶体的发射峰红移约30nm；Lu的掺入有利于提高CeF_3纳米粒子的发光强度，随Lu掺入量的增大，粒子的发光强度出现先增后减的情况，在掺杂浓度为30mol％时，我们得到CeF_3纳米粒子的最大发射，但在50mol％的掺杂浓度下的粒子的发射强度仍要比未掺杂体系的发光强度要强。325nln监测粒子的激发光谱是从200nm到350nm的宽带吸收，激发峰峰位于260nm左右。比CeF_3单晶体的280nm激发峰蓝移了20nm左右。而且粒子的激发光谱中未见长波方向上的肩峰，说明粒子中CeF_3纳米粒子结晶良好，且体系中氧含量低。采用自创建一步原位聚合的方法合成了聚合物包覆的纳米粒子，并采用本体聚合的方法合成复合材料。综上所述，本文采用微乳液法合成了不同的氟化物纳米粒子，并研究了其稀土掺杂体系的光学特性，为聚合物基复合材料的制备以及应用奠定了可靠的实验基础。

On conduction mechanism in paramagnetic phase of Gd based manganites

Materials belonging to the family of manganites are technologically important since they exhibit colossal magneto resistance. A proper understanding of the transport properties is very vital in tailoring the properties. A heavy rare earth doped manganite like Gd0·7Sr0·3MnO3 is purported to be exhibiting unusual properties because of smaller ionic radius of Gd. Gd0·7Sr0·3MnO3 is prepared by a wet solid state reaction method. The conduction mechanism in such a compound has been elucidated by subjecting the material to low temperature d.c. conductivity measurement. It has been found that the low band width material follows a variable range hopping (VRH) model followed by a small polaron hopping (SPH) model. The results are presented here