Prevalence of antinuclear autoantibodies in the serum of normal blood dornors

OBJECTIVE:To examine the presence of serum antinuclear autoantibodies in a healthy population. METHODS: Serum of 500 normal blood donors between 18 and 60 years of age were tested for the presence of autoantibodies. Antinuclear antibodies were detected by indirect immunofluorescence technique using HEp-2 epithelial cells as the substrate. The presence of dnaN was detected by indirect immunofluorescence technique using Critidia lucillae as the substrate. Anti-SSA (RO), anti-SSB (LA), anti-Sm, and anti-RNP were determined by double radial immunodiffusion. RESULTS: In the evaluation of the presence of serum antibodies, antinuclear antibodies were detected in 22.6% of the sera. The presence of other antibodies was not significant. The majority of the titers were 1:40. CONCLUSION: The presence of autoantibodies is not necessarily pathologic and has to be related to the age group, gender, and clinical condition of the patient.

Anatomic study of the dorsal arterial system of the hand

Historically, the dorsal arterial system of the hand received less attention than the palmar system. The studies concerning dorsal arterial anatomy present some controversies regarding the origin and presence of the dorsal metacarpal artery branches. Knowledge of the anatomy of dorsal metacarpal arteries is especially applied in the surgical planning for flaps taken from the dorsum of the hand. The purpose of this study is to analyze the arterial anatomy of the dorsum of the hand, compare our observations with those of previous studies from the literature, and therefore to define parameters for surgical planning for flaps supplied by the dorsal metacarpal arteries. METHOD: Twenty-six dissections were performed at the dorsum of the right hand of 26 cadavers by making a distal-based U-shaped incision. After catheterization of the radial artery at the wrist level, a plastic dye solution with low viscosity and quick solidification was injected to allow adequate exposure of even small vessels. The radial artery and its branches, the dorsal arterial arch, the dorsal metacarpal arteries, the distal and proximal communicating branches of the palmar system, and the distal cutaneous branches were carefully dissected and identified. RESULTS: The distal cutaneous branches originating from the dorsal metacarpal arteries were observed in all cases; these were located an average of 1.2 cm proximal from the metacarpophalangeal joint. The first dorsal metacarpal artery presented in 3 different patterns regarding its course: fascial, subfascial, and mixed. The branching pattern of the radial artery at the first intermetacarpal space was its division into 3 branches. We observed the presence of the dorsal arterial arch arising from the radial artery in 100% of the cases. The distance between the dorsal arterial arch and the branching point of the radial artery was an average of 2 cm. The first and second dorsal metacarpal arteries were visualized in all cases. The third and fourth dorsal metacarpal arteries were visualized in 96.2% and 92.3% of cases, respectively. There was proximal and distal communication between the dorsal arterial arch and the palmar system through the communicating branches contributing to the dorsal metacarpal artery formation. CONCLUSION: At the dorsum of the hand there is a rich arterial net that anastomoses with the palmar arterial system. This anatomical characteristic allows the utilization of the dorsal aspect of the hand as potential donor site for cutaneous flaps.

Estudo anatômico das madeiras dos gêneros Anisophyllea R. Brow ex. sabine e Polygonanthus Ducke. (Rhizophoraceae)

Neste trabalho, é feito o estudo dos caracteres anatômicos de 1 (uma) espécie do gênero Anlsophylleae de 2 (duas) espécies do gênero Polygonanthus(Rhizophoraceae) e para cada espécie são apresentadas: características gerais, descrição macro e microscópía, macro e microfotografias dos cortes transversal, tangencial e radial, histogramas da variação de freqüência de fibras e elementos vasculares, um quadro slinóptico com as principais características de cada espécie e uma ficha biométrlca dos elementos anatômicos, para cada espécie. As espécies estudadas foram: Anlisophylea manausensisPires & Rodrigues, Polygonanthus amazonicusDucke e P. punctulatusKuhlmann.

VARIAÇÃO DIMENSIONAL DOS ELEMENTOS XILEMÂTICOS EM DUAS ESPÉCIES MADEIREIRAS DA AMAZÔNIA

Árvores de Saccoglotis guianensis Benth e Andira parviflora Ducke com aproximadamente 26 metros de altura foram seccionadas em sete partes para estudo das dimensões de fibras e dos elementos de vasos. No sentido radial ambas espécies mostraram um aumento no comprimento de fibras com algumas irregularidades da medula para o câmbio bem como fibras mais curtas no topo do tronco. Neste existe um maior número de vasos por milímetro quadrado. É discutido a influência de reguladores de crescimento no número de elementos de vasos. Existe uma diminuição no comprimento das fibras e elementos de vasos em direção ao topo depois de terem alcançado valores máximos numa determinada altura, e um decrescimo irregular na largura desses elementos da base para o topo das árvores. No sentido radial ambas espécies mostraram um pequeno aumento na largura das fibras e elementos de vasos. Estes e as fibras são menores nos galhos, e onde o número de elementos de vasos é maior para as duas espécies. A razão W/C utilizada como uma estimativa da razão do volume da parede celular para o volume da celula diminui da medula em direção ao câmbio. São apresentados 10 gráficos e uma tabela é discutido os fatores que podem influenciar na variação dos elementos ao longo da árvore.

MORFOLOGIA DOS FRUTOS, SEMENTES E PLÂNTULAS DE Platonia insigms MART. (CLUSIACEAE). I. ASPECTOS ANATÔMICOS DOS FRUTOS E SEMENTES EM DESENVOLVIMENTO

São descritos aspectos morfológicos e estruturais dos frutos e sementes, em desenvolvimento, de Platonia insignis(Clusiaceae), visando principalmente esclarecer a origem da camada comestível presente no fruto. Concluiu-se que a camada carnosa branco-amarelada, que envolve as sementes, é de origem endocárpica e começa a se diferenciar já nos estádios iniciais do desenvolvimento do fruto, através de um acentuado alongamento radial das camadas mais internas do endocarpo. Estas, juntamente com as células dos septos, que também se alongam à medida que o fruto se desenvolve, vão se aderindo à testa por meio de interdigitações. Posteriormente, no fruto maduro, o endocarpo destaca-se do restante do pericarpo, permanecendo firmemente ligado à semente.

Hand gesture recognition for human computer interaction : a comparative study of different image features

Hand gesture recognition for human computer interaction, being a natural way of human computer interaction, is an area of active research in computer vision and machine learning. This is an area with many different possible applications, giving users a simpler and more natural way to communicate with robots/systems interfaces, without the need for extra devices. So, the primary goal of gesture recognition research is to create systems, which can identify specific human gestures and use them to convey information or for device control. For that, vision-based hand gesture interfaces require fast and extremely robust hand detection, and gesture recognition in real time. In this study we try to identify hand features that, isolated, respond better in various situations in human-computer interaction. The extracted features are used to train a set of classifiers with the help of RapidMiner in order to find the best learner. A dataset with our own gesture vocabulary consisted of 10 gestures, recorded from 20 users was created for later processing. Experimental results show that the radial signature and the centroid distance are the features that when used separately obtain better results, with an accuracy of 91% and 90,1% respectively obtained with a Neural Network classifier. These to methods have also the advantage of being simple in terms of computational complexity, which make them good candidates for real-time hand gesture recognition.

Prevalência da infecção pelo Vírus da Leucose dos Bovinos em rebanhos leiteiros criados no estado do Amazonas, Brasil

Determinou-se a prevalência de anticorpos séricos anti-Vírus da Leucose dos Bovinos (anti-VLB) em 661 amostras de soro sangüíneo, colhidas em 16 rebanhos leiteiros criados em quatro municípios da Microrregião de Manaus, no Estado do Amazonas (Manaus, Iranduba, Autazes e Careiro da Várzea). Para detecção de anticorpos anti-VLB utilizou-se o teste de Imunodifusão Radial Dupla de Ouchterlony em gel de ágar, com uso do antígeno glicoprotéico (gp-51) da cápsula do vírus. Os resultados demonstraram a ocorrência da Leucose Enzoótica dos Bovinos nos rebanhos estudados, sendo a taxa de prevalência de anticorpos séricos anti-VLB na população examinada igual a 8,9% (59/661), com a exclusão dos animais com menos de seis meses de idade, nos quais a sororeação positiva poderia representar transferência passiva de anticorpos colostrais, verificou-se uma taxa de prevalência da infecção igual a 9,6% (58/604). Os animais avaliados, foram estratificados em grupos de acordo com a faixa etária e sexo. A análise dos resultados obtidos, pelo teste de duas proporções, permitiu concluir que a prevalência de bovinos portadores de anticorpos anti-VLB foi significativamente maior nos animais com mais de 12 meses de idade, não havendo diferenças significativas nos resultados obtidos entre machos e fêmeas.

Caracterização anatômica da madeira de sete espécies da amazônia com vistas à produção de energia e papel

Foram estudadas as características anatômicas da madeira de 7 espécies ocorrentes na floresta Amazônia com vistas a geração de energia ou produção de papel. Para qualificação de madeira para produção de papel consideraram-se, dentre outros parâmetros, o coeficiente de rigidez e de flexibilidade, densidade, índice de Runkel, percentual de fibras, vasos, parênquima axial e de raios. Para produção de energia determinaram-se a densidade, a fração parede (%) das células em relação a área ocupada por cada tipo de células, percentual de fibras, de vasos e de parênquima axial e radial. O estudo foi baseado em 3 áreas de seções transversais, orientadas do centro em direção ao alburno. Com base nas características anatômicas e na densidade, Bellucia grossularioides, Cecropia palmata, Duguetia cauliflora, Eschweilera matamata e Parkia multuijuga podem ser usadas para polpa destinada a produção de papel, e Myrocarpus frondosus, Sloaneagrandis podem ser usadas na produção de carvão.

Estudo anatômico das espécies de Leguminosae comercializadas no estado do Pará como "angelim"

A estrutura da madeira de sete espécies de Leguminosae comercializadas como "angelim", no estado do Pará, foi analisada quanto aos aspectos anatômicos através de cortes histológicos da madeira, nos sentidos transversal, tangencial e radial. Através deste estudo procurou-se determinar diferenças básicas entre as espécies comercializadas com a mesma denominação vernacular, a fim de auxiliar no processo de identificação anatômica das mesmas. Uma chave dicotômica foi elaborada para separar as espécies estudadas (Andira surinamensis, Dinizia excelsa, Hymenolobium excelsum, H. modestum, H. pulcherrimum, H. petraeum e Vatairea paraensis). Características de parênquima, raios e poros são muito úteis na separação das espécies estudadas em nível de gênero, porém em nível de espécie a separação é mais difícil. Para o agrupamento de espécies, é necessário que as características anatômicas das espécies sejam conhecidas para associadas a características morfológicas.

Annular flow of viscoelastic fluids: Analytical and numerical solutions

This work provides analytical and numerical solutions for the linear, quadratic and exponential Phan–Thien–Tanner (PTT) viscoelastic models, for axial and helical annular fully-developed flows under no slip and slip boundary conditions, the latter given by the linear and nonlinear Navier slip laws. The rheology of the three PTT model functions is discussed together with the influence of the slip velocity upon the flow velocity and stress fields. For the linear PTT model, full analytical solutions for the inverse problem (unknown velocity) are devised for the linear Navier slip law and two different slip exponents. For the linear PTT model with other values of the slip exponent and for the quadratic PTT model, the polynomial equation for the radial location (β) of the null shear stress must be solved numerically. For both models, the solution of the direct problem is given by an iterative procedure involving three nonlinear equations, one for β, other for the pressure gradient and another for the torque per unit length. For the exponential PTT model we devise a numerical procedure that can easily compute the numerical solution of the pure axial flow problem

Renewable energy system for an isolated micro grid

This paper presents the development of the power electronics needed for the interaction between the electrical generator of a wind turbine and an isolated ac micro grid. In this system there are basically two types of receptors for the energy produced by the wind turbine, which are the loads connected to the isolated micro grid and the batteries used to store energy. There are basically two states in which the system will work. One of the states is when there is enough wind power to supply the loads and the extra energy is used to charge the batteries. The other state is when there is low wind power and the batteries have to compensate the lack of power, so that the isolated micro grid has enough power to supply at least the priority loads. In this paper are presented the hardware and the control algorithm for the developed system. The topology was previously tested in computer simulations, using the software PSIM 9.0, and then validated with the implementation of a laboratory prototype.

Effect of butadiene/styrene ratio, block structure and carbon nanotube content on the mechanical and electrical properties of thermoplastic elastomers after UV ageing

Thermoplastic elastomers based on a triblock copolymer styrene-butadiene-styrene (SBS) with different butadiene/styrene ratios, block structure and carbon nanotube (CNT) content were submitted to accelerated weathering in a Xenontest set up, in order to evaluate their stability to UV ageing. It was concluded that ageing mainly depends on butadiene/styrene ratio and block structure, with radial block structures exhibiting a faster ageing than linear block structures. Moreover, the presence of carbon nanotubes in the SBS copolymer slows down the ageing of the copolymer. The evaluation of the influence of ageing on the mechanical and electrical properties demonstrates that the mechanical degradation is higher for the C401 sample, which is the SBS sample with the largest butadiene content and a radial block structure. On the other hand, a copolymer derivate from SBS, the styrene-ethylene/butadiene-styrene (SEBS) sample, retains a maximum deformation of ~1000% after 80 h of accelerated ageing. The hydrophobicity of the samples decreases with increasing ageing time, the effect being larger for the samples with higher butadiene content. It is also verified that cytotoxicity increases with increasing UV ageing with the exception of SEBS, which remains not cytotoxic up to 80 h of accelerated ageing time, demonstrating its potential for applications involving exposition to environmental conditions.

Antibacterial properties of fibrous stents coated with silver oxide nanocoatings

Stents are rigid and perforated tubular structures, which are inserted into blood vessels in order to prevent or inhibit the constriction of blood flow, restoring the normal blood flow, when blood vessels are clogged, being used in 70% of angioplasties. These medical devices assume great importance in the treatment of cardiovascular diseases (CVD) which are the leading cause of death worldwide. In the European Union CVD account for 40% of deaths and assume an estimated annual cost of 196 billion euros[1]. Stents must possess certain requirements, in order to, adequately, perform its function, such as biocompatibility (so that its use does not c ause damage on the health of its user), mechanical strength, radiopacity (so that it is easy to view), longitudinal flexibility, ease of handling, corrosion resistance and having high strength and high radial expansion ability to recover. Stents can be made of different materials, but metals, particularly stainless steel, are the most common. However, metallic stents present several dRawbacks such as corrosion and restenosis, leading to health complications for the patient, or even death. In order to minimize these disadvantages, new materials, like fibrous materials, have been used [2]. Monofilaments present high potential for stents development because, in addition to its biocompatibility, these materials allow the application of various surface treatments, such as antibacterial coatings. Furthermore, monofilament exhibit excellent mechanical properties, like greater stiffness and good results when subjected to compression, tensile and bending forces, since these forces will be directly supported by the monofilament [3]. To minimize the reaction of the human body and Limit the adhesion of microorganisms to the stent surface, some coatings have been developed, including the use of novel metals with antimicrobial properties, like silver. The main objective of this study was the development of fibrous stents, incorporation of silver oxide nanocoating. For the development of the stent, polyester monofilaments with 0.27mm of diameter were used in braiding technology, with a mandrel diameter of 6mm and a braiding angle of 35⁰. The mechanical behaviour of the stent were evaluated by mechanical testing under longitudinal and radial compression, bending. The results of compressive strength tests are according with value from literature: 1.13 to 2.9 N for radial compression and 0. 16-5.28N to longitudinal compression. From literature is also possible to verify that stents must present 75% of unchanged diameter during the bending test and must possess a porosity between 70% and 80% [4]. The produced polyester stent presents values of 1.29N for radial compression, 0.23N for longitudinal compression, 80% of porosity and 85.5% of unchanged diameter, during bending tests. For the antibacterial functionalization, silver oxide nanocoatings were prepared, through reactive magnetron g, with an Ag target in an Ar +O2 atmosphere. In order to evaluate the nanostructure and morphology of the coatings, d ifferent technique s like X-ray diffraction (XRD), scanning electron microscopy (SEM) and and X- ray photoelectron spectroscopy (XPS were used. From the analyses of XRD it is possible to verify that the peaks corresponds to planes of Ag2 O and MATERIAIS 2015 Porto, 21-23 June, 2015 characterize a cubic phase. The presence of Ag2 O is corroborated by XPS spectrum, where it is possible to observe silver, not only, in oxide state, but a lso in mettalic state, and it is possible to verify the presence of silver clusters, confirmed by SEM analysis. Films’ roughness and topography, parameters influencing the wettability of the surface and microorganism adhesion, were measured by Atomic Force Microscopy (AFM), and it was observed that the roughness is very low (under 10 nm). Coatings’ hydrophobicity and surface tension parameters were determined by contact angle measurement, and it was verified the hydrophobic behavior of the coatings. For antibacterial tests were used Staphylococcus epidermidis strain (IE186) and Staphylococcus aureus(ATCC 6538), and halo inhibition zone tests were realized. Ag+release rates were studied by means of inductively coupled plasma mass spectrometry (ICP -MS). The obtained results suggest that silver oxide coatings do not modify significantly surface properties of the substrate, like hydrophobicity and roughness, and present antimicrobial properties for both bacteria used.

Simulation of OWES with five-Level converter linked to the grid: Harmonic assessment

This paper deals with a computing simulation for an offshore wind energy system taking into account the influence of the marine waves action throughout the floating platform. The wind energy system has a variable-speed turbine equipped with a permanent magnet synchronous generator and a full-power five level converter, injecting energy into the electric grid through a high voltage alternate current link. A reduction on the unbalance of the voltage in the DC-link capacitors of the five-level converter is proposed by a strategic selection of the output voltage vectors. The model for the drive train of the wind energy system is a two mass model, including the dynamics of the floating platform. A case study is presented and the assessment of the quality of the energy injected into the electric grid is discussed.

Simulation of a rectifier malfunction on a offshore wind system with HVDC transmission

A new integrated mathematical model for the simulation of an offshore wind system having a rectifier input voltage malfunction at one phase is presented in this paper. The mathematical model considers an offshore variable-speed wind turbine on a floating platform, equipped with a permanent magnet synchronous generator using full-power three-level converter to inject energy into the electric network, through a high voltage direct current transmission submarine cable. The model for the drive train is a discrete three mass, incorporating the dynamic of the moving surface. A case study is presented to access conclusion about the malfunction.