Activation barrier for the alpha.-cleavage process in thiones

The Occurrence of the Norrish type I a-cleavage process in some thio compounds has been examined by using the MIND013 method and employing the configuration interaction. Results reveal that where the radiationless process is not efficient, thio compounds can undergo photodissociation into radicals in their lowest triplet and singlet excited states. The activation barriers in all these cases arise from an avoided crossing between two states of different symmetries. The calculations of activation barriers by the CNDO-CI and MINDO-CI procedures reveal that the MINDO-CI method leads to realistic values of the activation energies.

A building-up process in open-framework metal carboxylates that involves a progressive increase in dimensionality

Extensive research work has been carried out in the last few years on the synthesis and characterization of several families of open-framework materials, including aluminosilicates,[1] phosphates,[2] and carboxylates.[3] These studies have shown the occurrence of a variety of three dimensional (3D) architectures containing channels and other features.

Role of external electron donor in methylene blue sensitized dichromated gelatin holograms:an experimental study

An experimental study to ascertain the role of external electron donor in methylene blue sensitized dichromated gelatin (MBDCG) holograms has been carried out. The required volume holographic transmission gratings in MBDCG have been recorded using 633-nm light from a He-Ne laser. Three well-known electron donors, namely, N, N-dimethylformamide (DMF); ethylenediaminetetraacetic acid (EDTA); triethanolamine (TEA), were used in this study. The variation of diffraction efficiency (η) as a function of light exposure (E) and concentration (C) of the electron donor under consideration was chosen as the figure of merit for judging the role of external electron donor in MBDCG holograms. A self-consistent analysis of the experimental results was carried out by recalling the various known facts about the photochemistry and the hologram formation in DSDCG and also DCG. The important findings and conclusions are as follows: (i) Each η vs E graph is a bell-shaped curve and its peak height is influenced in a characteristic manner by the external electron donor used. (ii) High diffraction efficiency/recording speed can be achieved in pure MBDCG holograms. (iii) The diffraction efficiency/recording speed achieved in electron donor sensitized MBDCG holograms did not show any significant improvement at all over that observed in pure MBDCG holograms. (iv) In electron donor sensitized MBDCG holograms, the electron donor used, depending on its type and concentration, appears to promote the process of cross-linking of gelatin molecules in a manner to either retain or deteriorate the refractive-index modulation achieved using pure MBDCG.

Process of burnout: structure, antecedents, and consequences

The major changes that have been witnessed in today's workplaces are challenging the mental well-being of employed people. Stress and burnout are considered to be modern epidemics, and their importance to physical health and work ability has been acknowledged world-wide. The aim of the thesis was to study the concept of burnout as a process proceeding from its antecedents, through the development of the syndrome, and to its outcomes. Several work-related factors considered antecedents of burnout were studied in different occupational groups. The syndrome of burnout is seen as consisting of three dimensions - exhaustion, cynicism and lack of professional efficacy - and different alternatives for the sequential development of these dimensions were tested. Furthermore, several indicators of the severely detrimental health and work ability outcomes of burnout were investigated in a longitudinal study design. The research questions were as follows. 1) Is burnout, as measured with the Maslach Burnout Inventory - General Survey (MBI-GS), a three-dimensional construct and how invariant is the factorial structure across occupations (Finnish) and national samples (Finnish, Swedish and Dutch)? How persistent is exhaustion over time? 2) What is the sequential process of burnout? Is it similar across occupations? How do work stressors relate to the process? 3) How does burnout relate to severe health consequences as well as temporary and chronic work disability according to hospitalization periods, sick-leave episodes and receiving disability pensions? The data were collected between 1986 and 2005. The population of the study consisted of respondents to a company-wide questionnaire survey carried out in 1996-1997 (N=9705, response rate 63%). The participants comprised 6025 blue-collar workers and 3680 white-collar workers. The majority were men (N=7494) and the average age was 43.7 years. In addition, a sample from the population had responded to a questionnaire survey in 1988, which was combined with the 1996 data to form panel data on 713 respondents. The register-based data were collected between 1986 and 2005 from 1) the company's occupational health services' records for a sample of respondents from the 1996 questionnaire survey (sick-leave data), 2) hospitalization records from the Hospital discharge register, and 3) disability pension records from the Finnish Centre for Pensions. These data were combined person by person with the 1996 questionnaire survey data with the help of personal identification numbers which were saved with the study numbers by the researchers. The results showed that burnout consists of three separate but correlating symptoms: exhaustion, cynicism and lack of professional efficacy. As a syndrome, burnout was strongly related to job stressors at work, and seemed to develop from exhaustion through cynicism to lack of professional efficacy in a similar manner among white-collar and blue-collar employees. The results also showed that exhaustion persisted even after eight years of follow-up but did not predict cynicism or lack of professional efficacy after that amount of time. Nor were job stressors longitudinally related to burnout. Longitudinal results were obtained for the severe health-related consequences of burnout. The investigated outcomes represented different phases of health deterioration ranging from sick-leaves and hospitalization periods to receiving work disability pensions. The results showed that burnout syndrome, and its elements of exhaustion and cynicism, were related to future mental and cardiovascular disorders as indicated by hospitalization periods. Burnout was also related to future sick-leave periods due to mental, cardiovascular and musculoskeletal disorders. Of the separate elements, exhaustion was related to the same three categories of disorder, cynicism to mental, musculoskeletal and digestive disorders, and lack of professional efficacy to mental and musculoskeletal disorders. Burnout also predicted receiving disability pensions due to mental and musculoskeletal disorders among initially healthy subjects. Exhaustion was related to receiving disability pensions even when self-reported chronic illness was taken into account. The results suggest that burnout is a multidimensional, chronic, work-related syndrome, which may have serious consequences for health and work ability.

Synthesis of FeCu Nanopowder by Levitational Gas Condensation Process

Condensation from the vapor state is an important technique for the preparation of nanopowders. Levitational gas condensation is one such technique that has a unique ability of attaining steady state. Here, we present the results of applying this technique to an iron-copper alloy (96Fe-4Cu). A qualitative model of the process is proposed to understand the process and the characteristics of resultant powder. A phase diagram of the alloy system in the liquid-vapor region was calculated to help understand the course of condensation, especially partitioning and coring during processing. The phase diagram could not explain coring in view of the simultaneous occurrence of solidification and the fast homogenization through diffusion in the nanoparticles; however, it could predict the very low levels of copper observed in the levitated drop. The enrichment of copper observed near the surface of the powder was considered to be a manifestation of the lower surface energy of copper compared with that of iron. Heat transfer calculations indicated that most condensed particles can undergo solidification even when they are still in the proximity of the levitated drop. It helped us to predict the temperature and the cooling rate of the powder particles as they move away from the levitated drop. The particles formed by the process seem to be single domain, single crystals that are magnetic in nature. They, thus, can agglomerate by forming a chain-like structure, which manifests as a three-dimensional network enclosing a large unoccupied space, as noticed in scanning electron microscopy and transmission electron microscopy studies. This also explains the observed low packing density of the nanopowders.

Exact bounds for distributed graph colouring

A distributed system is a collection of networked autonomous processing units which must work in a cooperative manner. Currently, large-scale distributed systems, such as various telecommunication and computer networks, are abundant and used in a multitude of tasks. The field of distributed computing studies what can be computed efficiently in such systems. Distributed systems are usually modelled as graphs where nodes represent the processors and edges denote communication links between processors. This thesis concentrates on the computational complexity of the distributed graph colouring problem. The objective of the graph colouring problem is to assign a colour to each node in such a way that no two nodes connected by an edge share the same colour. In particular, it is often desirable to use only a small number of colours. This task is a fundamental symmetry-breaking primitive in various distributed algorithms. A graph that has been coloured in this manner using at most k different colours is said to be k-coloured. This work examines the synchronous message-passing model of distributed computation: every node runs the same algorithm, and the system operates in discrete synchronous communication rounds. During each round, a node can communicate with its neighbours and perform local computation. In this model, the time complexity of a problem is the number of synchronous communication rounds required to solve the problem. It is known that 3-colouring any k-coloured directed cycle requires at least ½(log* k - 3) communication rounds and is possible in ½(log* k + 7) communication rounds for all k ≥ 3. This work shows that for any k ≥ 3, colouring a k-coloured directed cycle with at most three colours is possible in ½(log* k + 3) rounds. In contrast, it is also shown that for some values of k, colouring a directed cycle with at most three colours requires at least ½(log* k + 1) communication rounds. Furthermore, in the case of directed rooted trees, reducing a k-colouring into a 3-colouring requires at least log* k + 1 rounds for some k and possible in log* k + 3 rounds for all k ≥ 3. The new positive and negative results are derived using computational methods, as the existence of distributed colouring algorithms corresponds to the colourability of so-called neighbourhood graphs. The colourability of these graphs is analysed using Boolean satisfiability (SAT) solvers. Finally, this thesis shows that similar methods are applicable in capturing the existence of distributed algorithms for other graph problems, such as the maximal matching problem.

Effect of sintering on optical, structural and photoluminescence properties of ZnO thin films prepared by sol-gel process

Zinc oxide (ZnO) thin films have been deposited on glass substrates via sol-gel technique using zinc acetate dihydrate as precursor by spin coating of the sol at 2000 rpm. Effects of annealing temperature on optical, structural and photo luminescence properties of the deposited ZnO films have been investigated. The phase transition from amorphous to polycrystalline hexagonal wurtzite structure was observed at an annealing temperature of 400 degrees C. An average transmittance of 87% in the visible region has been obtained at room temperature. The optical transmittance has slightly increased with increase of annealing temperature. The band gap energy was estimated by Tauc's method and found to be 3.22 eV at room temperature. The optical band gap energy has decreased with increasing annealing temperature. The photoluminescence (PL) intensity increased with annealing temperature up to 200 degrees C and decreased at 300 degrees C. (c) 2010 Elsevier B.V. All rights reserved.

The hardness of approximating the boxicity, cubicity and threshold dimension of a graph

A k-dimensional box is the Cartesian product R-1 X R-2 X ... X R-k where each R-i is a closed interval on the real line. The boxicity of a graph G, denoted as box(G), is the minimum integer k such that G can be represented as the intersection graph of a collection of k-dimensional boxes. A unit cube in k-dimensional space or a k-cube is defined as the Cartesian product R-1 X R-2 X ... X R-k where each R-i is a closed interval oil the real line of the form a(i), a(i) + 1]. The cubicity of G, denoted as cub(G), is the minimum integer k such that G can be represented as the intersection graph of a collection of k-cubes. The threshold dimension of a graph G(V, E) is the smallest integer k such that E can be covered by k threshold spanning subgraphs of G. In this paper we will show that there exists no polynomial-time algorithm for approximating the threshold dimension of a graph on n vertices with a factor of O(n(0.5-epsilon)) for any epsilon > 0 unless NP = ZPP. From this result we will show that there exists no polynomial-time algorithm for approximating the boxicity and the cubicity of a graph on n vertices with factor O(n(0.5-epsilon)) for any epsilon > 0 unless NP = ZPP. In fact all these hardness results hold even for a highly structured class of graphs, namely the split graphs. We will also show that it is NP-complete to determine whether a given split graph has boxicity at most 3. (C) 2010 Elsevier B.V. All rights reserved.

Adsorption-nucleation/growth based model for electrochemical phase formation and Avrami ansatz for a multicomponent competitive growth process

The existing models describing electrochemical phase formation involving both adsorption and a nucleation/growth process are modified. The limiting cases leading to the existing models are discussed. The characteristic features of the potentiostatic transients are presented. A generalization of the Avrami ansatz is given for two or more competitive irreversibly growing phases.