Measurements of the Magnetic Permeabilities of the Iron-Manganese Alloy System Prepared by the Methods of Powder Metallurgy

Powder metallurgy is a branch of metallurgy which produces metallic compacts in their final forms by means of pressure and heat-treatment from the pow­ders. The products of powder metallurgy are being used in our daily lives quite often. For example, the tungsten wires in the electric bulbs to the silver-tin fillings of our teeth.

Cold-Start Emissions testing of Snowmobiles Using Ethanol and Gasoline

Increasing prices for fuel with depletion and instability in foreign oil imports has driven the importance for using alternative and renewable fuels. The alternative fuels such as ethanol, methanol, butyl alcohol, and natural gas are of interest to be used to relieve some of the dependence on oil for transportation. The renewable fuel, ethanol which is made from the sugars of corn, has been used widely in fuel for vehicles in the United States because of its unique qualities. As with any renewable fuel, ethanol has many advantages but also has disadvantages. Cold startability of engines is one area of concern when using ethanol blended fuel. This research was focused on the cold startability of snowmobiles at ambient temperatures of 20 °F, 0 °F, and -20 °F. The tests were performed in a modified 48 foot refrigerated trailer which was retrofitted for the purpose of cold-start tests. Pure gasoline (E0) was used as a baseline test. A splash blended ethanol and gasoline mixture (E15, 15% ethanol and 85% gasoline by volume) was then tested and compared to the E0 fuel. Four different types of snowmobiles were used for the testing including a Yamaha FX Nytro RTX four-stroke, Ski-doo MX Z TNT 600 E-TEC direct injected two stroke, Polaris 800 Rush semi-direct injected two-stroke, and an Arctic Cat F570 carbureted two-stroke. All of the snowmobiles operate on open loop systems which means there was no compensation for the change in fuel properties. Emissions were sampled using a Sensors Inc. Semtech DS five gas emissions analyzer and engine data was recoded using AIM Racing Data Power EVO3 Pro and EVO4 systems. The recorded raw exhaust emissions included carbon monoxide (CO), carbon dioxide (CO2), total hydrocarbons (THC), and oxygen (O2). To help explain the trends in the emissions data, engine parameters were also recorded. The EVO equipment was installed on each vehicle to record the following parameters: engine speed, exhaust gas temperature, head temperature, coolant temperature, and test cell air temperature. At least three consistent tests to ensure repeatability were taken at each fuel and temperature combination so a total of 18 valid tests were taken on each snowmobile. The snowmobiles were run at operating temperature to clear any excess fuel in the engine crankcase before each cold-start test. The trends from switching from E0 to E15 were different for each snowmobile as they all employ different engine technologies. The Yamaha snowmobile (four-stroke EFI) achieved higher levels of CO2 with lower CO and THC emissions on E15. Engine speeds were fairly consistent between fuels but the average engine speeds were increased as the temperatures decreased. The average exhaust gas temperature increased from 1.3-1.8% for the E15 compared to E0 due to enleanment. For the Ski-doo snowmobile (direct injected two-stroke) only slight differences were noted when switching from E0 to E15. This could possibly be due to the lean of stoichiometric operation of the engine at idle. The CO2 emissions decreased slightly at 20 °F and 0 °F for E15 fuel with a small difference at -20 °F. Almost no change in CO or THC emissions was noted for all temperatures. The only significant difference in the engine data observed was the exhaust gas temperature which decreased with E15. The Polaris snowmobile (semi-direct injected two-stroke) had similar raw exhaust emissions for each of the two fuels. This was probably due to changing a resistor when using E15 which changed the fuel map for an ethanol mixture (E10 vs. E0). This snowmobile operates at a rich condition which caused the engine to emit higher values of CO than CO2 along with exceeding the THC analyzer range at idle. The engine parameters and emissions did not increase or decrease significantly with decreasing temperature. The average idle engine speed did increase as the ambient temperature decreased. The Arctic Cat snowmobile (carbureted two-stroke) was equipped with a choke lever to assist cold-starts. The choke was operated in the same manor for both fuels. Lower levels of CO emissions with E15 fuel were observed yet the THC emissions exceeded the analyzer range. The engine had a slightly lower speed with E15.

On trend estimation under monotone Gaussian subordination with long-memory: application to fossil pollen series

Fossil pollen data from stratigraphic cores are irregularly spaced in time due to non-linear age-depth relations. Moreover, their marginal distributions may vary over time. We address these features in a nonparametric regression model with errors that are monotone transformations of a latent continuous-time Gaussian process Z(T). Although Z(T) is unobserved, due to monotonicity, under suitable regularity conditions, it can be recovered facilitating further computations such as estimation of the long-memory parameter and the Hermite coefficients. The estimation of Z(T) itself involves estimation of the marginal distribution function of the regression errors. These issues are considered in proposing a plug-in algorithm for optimal bandwidth selection and construction of confidence bands for the trend function. Some high-resolution time series of pollen records from Lago di Origlio in Switzerland, which go back ca. 20,000 years are used to illustrate the methods.

DNA-based identification of novel bovine casein gene variants

In cattle, at least 39 variants of the 4 casein proteins (α(S1)-, β-, α(S2)- and κ-casein) have been described to date. Many of these variants are known to affect milk-production traits, cheese-processing properties, and the nutritive value of milk. They also provide valuable information for phylogenetic studies. So far, the majority of studies exploring the genetic variability of bovine caseins considered European taurine cattle breeds and were carried out at the protein level by electrophoretic techniques. This only allows the identification of variants that, due to amino acid exchanges, differ in their electric charge, molecular weight, or isoelectric point. In this study, the open reading frames of the casein genes CSN1S1, CSN2, CSN1S2, and CSN3 of 356 animals belonging to 14 taurine and 3 indicine cattle breeds were sequenced. With this approach, we identified 23 alleles, including 5 new DNA sequence variants, with a predicted effect on the protein sequence. The new variants were only found in indicine breeds and in one local Iranian breed, which has been phenotypically classified as a taurine breed. A multidimensional scaling approach based on available SNP chip data, however, revealed an admixture of taurine and indicine populations in this breed as well as in the local Iranian breed Golpayegani. Specific indicine casein alleles were also identified in a few European taurine breeds, indicating the introgression of indicine breeds into these populations. This study shows the existence of substantial undiscovered genetic variability of bovine casein loci, especially in indicine cattle breeds. The identification of new variants is a valuable tool for phylogenetic studies and investigations into the evolution of the milk protein genes.

Chromosomal organization and evolutionary conservation of the human chromosome 19q linkage group containing three DNA repair genes

A series of human-rodent somatic cell hybrids were investigated by Southern blot analysis for the presence or absence of twenty-six molecular markers and three isozyme loci from human chromosome 19. Based on the co-retention of these markers in the various independent hybrid clones containing portions of human chromosome 19 and on pulsed field mapping, chromosome 19 is divided into twenty ordered regions. The most likely marker order for the chromosome is: (LDLR, C3)-(cen-MANNB)-D19S7-PEPD-D19S9-GPI-TGF$ \beta$-(CYP2A, NCA, CGM2, BCKAD)-PSG1a-(D19S8, XRCC1)-(D19S19, ATP1A3)-(D19S37, APOC2)-CKMM-ERCC2-ERCC1-(D19S62, D19S51)-D19S6-D19S50-D19S22-(CGB, FTL)-qter.^ The region of 19q between the proximal marker D19S7 and the distal gene coding for the beta subunit of chorionic gonadotropin (CGB) is about 37 Mb in size and covers about 37 cM genetic distance. The ration of genetic to physical distance on 19q is therefore very close to the genomic average OF 1 cM/Mb. Estimates of physical distances for intervals between chromosome 19 markers were calculated using a mapping function which estimates distances based on the number of breaks in hybrid clone panels. The consensus genetic distances between individual markers (established at HBM10) were compared to these estimates of physical distances. The close agreement between the two estimates suggested that spontaneously broken hybrids are as appropriate for this type of study as radiation hybrids.^ All three DNA repair genes located on chromosome 19 were found to have homologues on Chinese hamster chromosome 9, which is hemizygous in CHO cells, providing an explanation for the apparent ease with which mutations at these loci were identified in CHO cells. Homologues of CKMM and TGF$\beta$ (from human chromosome 19q) and a mini-satellite DNA specific to the distal region of human chromosome 19q were also mapped to Chinese hamster 9. Markers from 19p did not map to this hamster chromosome. Thus the q-arm of chromosome 19, at least between the genes PEPD and ERCC1, appears to be a linkage group which is conserved intact between humans and Chinese hamsters. ^

Predicting dependencies using domain-based coupling

Software dependencies play a vital role in programme comprehension, change impact analysis and other software maintenance activities. Traditionally, these activities are supported by source code analysis; however, the source code is sometimes inaccessible or difficult to analyse, as in hybrid systems composed of source code in multiple languages using various paradigms (e.g. object-oriented programming and relational databases). Moreover, not all stakeholders have adequate knowledge to perform such analyses. For example, non-technical domain experts and consultants raise most maintenance requests; however, they cannot predict the cost and impact of the requested changes without the support of the developers. We propose a novel approach to predicting software dependencies by exploiting the coupling present in domain-level information. Our approach is independent of the software implementation; hence, it can be used to approximate architectural dependencies without access to the source code or the database. As such, it can be applied to hybrid systems with heterogeneous source code or legacy systems with missing source code. In addition, this approach is based solely on information visible and understandable to domain users; therefore, it can be efficiently used by domain experts without the support of software developers. We evaluate our approach with a case study on a large-scale enterprise system, in which we demonstrate how up to 65 of the source code dependencies and 77% of the database dependencies are predicted solely based on domain information.

Gene flow and the maintenance of species boundaries

Hybrid zones are regions where individuals from genetically differentiated populations meet and mate, resulting in at least some offspring of mixed ancestry. Patterns of gene flow (introgression) in hybrid zones vary across the genome, allowing assessment of the role of individual genes or genome regions in reproductive isolation. Here, we document patterns of introgression between two recently diverged species of field crickets. We sampled at a very fine spatial scale and genotyped crickets for 110 highly differentiated single nucleotide polymorphisms (SNPs) identified through transcriptome scans. Using both genomic and geographic cline analysis, we document remarkably abrupt transitions (<100 m) in allele frequencies for 50 loci, despite high levels of gene flow at other loci. These are among the steepest clines documented for any hybridizing taxa. Furthermore, the cricket hybrid zone provides one of the clearest examples of the semi-permeability of species boundaries. Comparisons between data from the fine-scale transect and data (for the same set of markers) from sampling a much larger area in a different region of the cricket hybrid zone reveal consistent patterns of introgression for individual loci. The consistency in patterns of introgression between these two distant and distinct regions of the hybrid zone suggests that strong selection is acting to maintain abrupt discontinuities within the hybrid zone and that genomic regions with restricted introgression likely include genes that contribute to nonecological prezygotic barriers.

Avalanche related damage potential - changes of persons and mobile values since the mid-twentieth century, case study Galtür

When determining risk related to natural hazard processes, many studies neglect the investigations of the damage potential or are limited to the assessment of immobile values like buildings. However, persons as well as mobile values form an essential part of the damage potential. Knowledge of the maximum number of exposed persons in an endangered area is of great importance for elaborating evacuation plans and immediate measures in case of catastrophes. In addition, motor vehicles can also be highly damaged, as was shown by the analysis of avalanche events. With the removal of mobile values in time as a preventive measure this kind of damage can be minimised. This study presents a method for recording the maximum number of exposed persons and monetarily assessing motor vehicles in the municipality of Galt¨ur (Tyrol, Austria). Moreover, general developments of the damage potential due to significant socio-economic changes since the mid-twentieth century are pointed out in the study area. The present situation of the maximum number of persons and mobile values in the official avalanche hazard zones of the municipality is described in detail. Information on the number of persons is derived of census data, tourism and employment statistics. During the winter months, a significant increase overlaid by strong short-term fluctuation in the number of persons can be noted. These changes result from a higher demand of tourism related manpower as well as from varying occupancy rates. The number of motor vehicles in endangered areas is closely associated to the number of exposed persons. The potential number of motor vehicles is investigated by means of mapping, statistics on the stock of motor vehicles and the density distribution. Diurnal and seasonal fluctuations of the investigated damage potential are pointed out. The recording of the number of persons and mobile values in endangered areas is vital for any disaster management.

An Experimental Study of Complex-Offer Auctions: Payment Cost Minimization vs. Offer Cost Minimization

A Payment Cost Minimization (PCM) auction has been proposed as an alternative to the Offer Cost Minimization (OCM) auction to be used in wholesale electric power markets with the intention to lower the procurement cost of electricity. Efficiency concerns about this proposal have relied on the assumption of true production cost revelation. Using an experimental approach, I compare the two auctions, strictly controlling for the level of unilateral market power. A specific feature of these complex-offer auctions is that the sellers submit not only the quantities and the minimum prices at which they are willing to sell, but also the start-up fees that are designed to reimburse the fixed start-up costs of the generation plants. I find that both auctions result in start-up fees that are significantly higher than the start-up costs. Overall, the two auctions perform similarly in terms of procurement cost and efficiency. Surprisingly, I do not find a substantial difference between less market power and more market power designs. Both designs result in similar inefficiencies and equally higher procurement costs over the competitive prediction. The PCM auction tends to have lower price volatility than the OCM auction when the market power is minimal but this property vanishes in the designs with market power. These findings lead me to conclude that both the PCM and the OCM auctions do not belong to the class of truth revealing mechanisms and do not easily elicit competitive behavior.

Estado, cooperativismo eléctrico y electrificación rural. La experiencia cordobesa entre 1930 y 1980

Pese a que el movimiento cooperativo eléctrico de Córdoba es uno de los más importantes del país y en la actualidad mueve gran parte de la economía del interior provincial, su surgimiento y desarrollo es una cuestión que aún no ha sido suficientemente tratada por la historiografía local. De allí la decisión de abordar tal temática que en este artículo se analiza desde la perspectiva de las relaciones entre el desarrollo del cooperativismo eléctrico y la expansión de la intervención del Estado en el sector eléctrico, pero prestando especial atención a los avances de la electrificación en el sector rural. Ese análisis abarca un amplio periodo de medio siglo, entre la aparición de las primeras cooperativas eléctricas y el momento en que, desde el punto de vista eléctrico, la provincia mediterránea deja de constituir un sistema independiente y se incorpora al sistema interconectado nacional, y muestra el papel jugado por esas entidades en el proceso de electrificación del campo que es un capítulo importante en el desarrollo eléctrico argentino y en el que las cooperativas eléctricas fueron precursoras, mucho antes de que el tema preocupase a los poderes públicos y cuando la política de las empresas privadas, atenidas a la rentabilidad, no planificó ni un metro de línea rural. Las cooperativas, en cambio, demostraron ser capaces de hacer electrificación rural con eficiencia.

Estado, cooperativismo eléctrico y electrificación rural. La experiencia cordobesa entre 1930 y 1980

Pese a que el movimiento cooperativo eléctrico de Córdoba es uno de los más importantes del país y en la actualidad mueve gran parte de la economía del interior provincial, su surgimiento y desarrollo es una cuestión que aún no ha sido suficientemente tratada por la historiografía local. De allí la decisión de abordar tal temática que en este artículo se analiza desde la perspectiva de las relaciones entre el desarrollo del cooperativismo eléctrico y la expansión de la intervención del Estado en el sector eléctrico, pero prestando especial atención a los avances de la electrificación en el sector rural. Ese análisis abarca un amplio periodo de medio siglo, entre la aparición de las primeras cooperativas eléctricas y el momento en que, desde el punto de vista eléctrico, la provincia mediterránea deja de constituir un sistema independiente y se incorpora al sistema interconectado nacional, y muestra el papel jugado por esas entidades en el proceso de electrificación del campo que es un capítulo importante en el desarrollo eléctrico argentino y en el que las cooperativas eléctricas fueron precursoras, mucho antes de que el tema preocupase a los poderes públicos y cuando la política de las empresas privadas, atenidas a la rentabilidad, no planificó ni un metro de línea rural. Las cooperativas, en cambio, demostraron ser capaces de hacer electrificación rural con eficiencia.

Estado, cooperativismo eléctrico y electrificación rural. La experiencia cordobesa entre 1930 y 1980

Pese a que el movimiento cooperativo eléctrico de Córdoba es uno de los más importantes del país y en la actualidad mueve gran parte de la economía del interior provincial, su surgimiento y desarrollo es una cuestión que aún no ha sido suficientemente tratada por la historiografía local. De allí la decisión de abordar tal temática que en este artículo se analiza desde la perspectiva de las relaciones entre el desarrollo del cooperativismo eléctrico y la expansión de la intervención del Estado en el sector eléctrico, pero prestando especial atención a los avances de la electrificación en el sector rural. Ese análisis abarca un amplio periodo de medio siglo, entre la aparición de las primeras cooperativas eléctricas y el momento en que, desde el punto de vista eléctrico, la provincia mediterránea deja de constituir un sistema independiente y se incorpora al sistema interconectado nacional, y muestra el papel jugado por esas entidades en el proceso de electrificación del campo que es un capítulo importante en el desarrollo eléctrico argentino y en el que las cooperativas eléctricas fueron precursoras, mucho antes de que el tema preocupase a los poderes públicos y cuando la política de las empresas privadas, atenidas a la rentabilidad, no planificó ni un metro de línea rural. Las cooperativas, en cambio, demostraron ser capaces de hacer electrificación rural con eficiencia.

Agglomeration versus Fragmentation:A Comparison of East Asia and Europe

Inspired by the observed contrasting patterns of industrial distribution in East Asia and Europe, this paper conducts an empirical clarification of the difference in spatial relationships among countries within a region for the electric machinery industry by use of spatial econometric analysis. The results indicate that, while production in the electric machinery industry in a country is positively correlated with that of neighboring countries in East Asia, there is no significant spatial correlation in Europe. Such a difference in spatial interdependence has important implications for economic development in those regions.

Using Cross-Lingual Explicit Semantic Analysis for Improving Ontology Translation

Semantic Web aims to allow machines to make inferences using the explicit conceptualisations contained in ontologies. By pointing to ontologies, Semantic Web-based applications are able to inter-operate and share common information easily. Nevertheless, multilingual semantic applications are still rare, owing to the fact that most online ontologies are monolingual in English. In order to solve this issue, techniques for ontology localisation and translation are needed. However, traditional machine translation is difficult to apply to ontologies, owing to the fact that ontology labels tend to be quite short in length and linguistically different from the free text paradigm. In this paper, we propose an approach to enhance machine translation of ontologies based on exploiting the well-structured concept descriptions contained in the ontology. In particular, our approach leverages the semantics contained in the ontology by using Cross Lingual Explicit Semantic Analysis (CLESA) for context-based disambiguation in phrase-based Statistical Machine Translation (SMT). The presented work is novel in the sense that application of CLESA in SMT has not been performed earlier to the best of our knowledge.