962 resultados para plant and machinery


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Boron deficiency in coffee trees ( Coffea arabica) is widespread, however, responses to B fertilizer have been erratic, depending on the year, method, and time of application. A better understanding of B uptake, distribution, and remobilization within the plant is important in developing a rational fertilization program. Field and greenhouse experiments were conducted to study B distribution and remobilization in coffee trees. Boron was provided either in the nutrient solution or sprayed on the leaves of trees grown under adequate or transient B deficiency. There was clear evidence for B translocation via symplast ( remobilization) to coffee grains, even in well-nourished plants. When 10 B was present in the nutrient solution during most part of fruit filling, from 33 to 40% of the B found in coffee fruits was absorbed during this period, depending on the timing and duration of the B deficiency treatment. In the field, when B was sprayed once on the leaves, around 4% of the fruit B was derived from the foliar fertilizer. Boron remobilization within coffee trees is limited in well nourished plants, but it can be significant during periods of temporary B deficiency in plants otherwise well nourished with B. The implications of these findings for B fertilization practice, are discussed.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Stenoma catenifer Walsingham is the major pest in avocado groves (Persea americana Mill.) in the Neotropical region. Management has been difficult for many reasons related to the reduced knowledge on its bioecology and the avocado growing systems. The goal of this work was to study the vertical distribution of S. catenifer in avocado plants, the gagging effect of infested fruit on its survival, and the losses caused. The experiments were conducted in a commercial grove located at the Sao Tomas de Aquino, State of Minas Gerais, Brazil, during the 2001/2002 and 2002/2003 growing season. S. catenifer was observed especially at the lower and central part of the plant, and the inner canopy was the least attacked in comparison with the north, south, east and west quadrants. These results may be important indicators for the use of am adequate sampling procedure. The highest percentage of attacked fruit had one to four larvae; in some cases up to eight individuals per fruit were found. The losses caused by the borer varied during the agricultural season, with figures close to 5% in a single evaluation, and the harvest loss may reach 27%. The bagging of infested fruit caused mortality of S. catenifer, as observed through the evaluation carried out four days later.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A rapid analytical approach suitable to achieve a comprehensive characterization of the compounds present in the infusion prepared from the leaves of Byrsonima fagifolia Niedenzu (Malpighiaceae), a Brazilian plant used as an infusion to treat gastric disorders, was developed. The method was based on high-performance liquid chromatography coupled to electrospray negative ionisation multistage ion trap mass spectrometry (HPLC/ESI-ITMSn). The main ions in the ESI-ITMS spectra were attributed to a quinic acid core containing from one to five galloyl units. Quercetin derivatives containing one and two sugar moieties as well as galloyl esterification were also detected. These results indicated that HPLC/ESI-ITMSn is easily applicable to infusions of this plant and allows the rapid and direct identification of these compounds in crude plant extracts. Copyright (C) 2007 John Wiley & Sons, Ltd.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A flow-injection (FI) system to match concentrations was used as an auto-diluter in multielement determination by inductively coupled plasma-mass spectrometry (ICP-MS). The flow system comprised loop-based injection or a timed valve that introduced a variable sample volume info a spray chamber through a standard Meinhard nebulizer of an ICP-MS. Routinely analyzed samples such as water, plant, and steel were selected. The accuracy of multielement determination was checked against water standard reference material from the National Institute of Standards and Technology (1643d), plant standard reference material from the National Bureau of Standards (1572 citrus leaves), and steel standard reference material from the National Bureau of Standards (AISI 4340). The measuring system was calibrated with a multielement solution, yielding a linear plot with good precision [relative standard deviation (RSD) < 3%, n = 12]. The results were in agreement at a 95% confidence level with the certified values for the reference materials and also with those obtained by continuous aspiration and by (FI) with a discrete volume. (C) 1999 John Wiley & Sons, Inc.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A field experiment was conducted from 1989-90 to 1991-92 to study the effect of potassium fertilization on guava (Psidium guajava L.). using 1-year-old plants of 'Rica', grown in a Kanhapludalf soil in the Jaboticabal region in Brazil. During the first year the K doses used were: 0, 24.9, 49.8, 99.6, 149.4 and 199.2 g K/plant, which were doubled during the second year and tripled during the third. In the third year the increase in g level showed positive response in yield. About 90% of the maximum yield observed was associated with 527 g K/plant and with a leaf content of 18.9 g K/kg.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The onion (Allium cepa L.) belongs to the family Alliaceae, and the second vegetables in economic importance. It horticultural culture of high relevance, in central-south and in the far south, is highlighting the states of São Paulo, Rio Grande do Sul, Santa Catarina and Parana. The bulbificacion only begins when the combination of the determinants of bulbificacion (photoperiod and temperature) of each cultivar is reached. It Can be grown in tropical regions with the use of vernalization of the bulbs. The objective of this study is to identify the efficiency in the production of seed, onion depending on the cut or not the bulb before the period of vernalization. The analysis of the variables consisted: humidity; number of seeds; mass of seeds for umbel; umbels number; number of seeds for umbel; total number of flowers and of fecundated flowers; number of seeds for capsule; total mass of seeds; emergency percentage; vigor percentage; index of emergency speed and mass of 100 seeds humidity; number of seeds; mass of seeds for umbel; umbels number; number of seeds for umbel; total number of flowers and of fecundated flowers; number of seeds for capsule; total mass of seeds; emergency percentage; vigor percentage; index of emergency speed and mass of 100 seeds, using the cultivars Baia Periforme and Texas Grano. The experimental design was randomized blocks with four replicates, there was 80 plants for replicate, each parcel was conduced with 20 plants distributed in 4 lines of 5 plants with spacing of 20cm between plants and lines which was avaliated the 6 central plants. The seeds production not variated between cultivars Texas Grano e Baia Periforme. The cultivar Texas Grano showed seeds with more physiological quality. The cut or not cut of the bulbs not changed the physiological quality of the seeds. But utilization of whole bulbs resulted more yield of seeds with more flowers number and fertilized flower in Baia Periforme, more value of the total mass of seeds, number of seeds by plant and number and mass of seed by umbel in two cultivars.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Toxic levels of Al and low availability of Ca have been shown to decrease root growth, which can also be affected by P availability. In the current experiment, initial plant growth and nutrition of cotton (Gossypium hirsutum var. Latifolia) were studied as related to its root growth in response to phosphorus and lime application. The experiment was conducted in Botucatu, Sao Paulo, Brazil, in pots containing a Dark Red Latosol (Acrortox, 20% clay, 72% sand). Lime was applied at 0.56, 1.12 and 1.68 g kg -1 and phosphorus was applied at 50, 100 and 150 mg kg -1. Two cotton (cv. IAC 22) plants were grown per pot for up to 42 days after plant emergence. There was no effect of liming on shoot dry weight, root dry matter yield, root surface and length, but root diameter was decreased with the increase in soil Ca. Shoot dry weight, as well as root length, surface and dry weight were increased with soil P levels up to 83 mg kg -1. Phosphorus concentration in the shoots was increased from 1.6 to 3.0 g kg -1 when soil P was increased from 14 to 34 mg kg -1. No further increases in P concentration were observed with higher P rates. The shoot/root ratio was also increased with P application as well as the amount of nutrients absorbed per unit of root surface. In low soil P soils the transport of the nutrient to the cotton root surface limits P uptake. In this case an increase in root growth rate due to P fertilisation does not compensate for the low P diffusion in the soil.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The seasonal dynamics of a dioecious population of Batrachospermum delicatulum (Skuja) Necchi and Entwisle was evaluated biweekly during the growth period of the macroscopic gametophyte, from late autumn (May) to early spring (October) in a third-order stream from the northeast region of Sao Paulo State, southeastern Brazil (20°43'S, 49°13'W). The population fluctuated throughout the study period in terms of percentage cover, frequency and chlorophyll content. Percent cover and frequency showed a clear pattern with the lowest values at the initial and final stages of the growth period and the highest in July-August (winter). Gametophyte growth was associated with high illumination and low temperature, which agrees with most observations on Batrachospermales in stream environments. Relatively wide variations in reproductive characteristics were observed during the growth period, which were not correlated with percentage cover, frequency and chlorophyll content. The phenologic pattern observed in this population was characterized by a synchronic development of female/male plant ratio with the number of spermatangia per plant resulting in. (i) a higher proportion of fertilized (carposporophytic) plants associated with more male plants; (ii) higher fertilization rates during the periods with higher production of spermatangia per plant; and (iii) higher production of spermatangia per plant when the population had more male plants. These characteristics were largely associated with water temperature and ion content. In terms of reproductive success, the population studied can be regarded as highly efficient, considering the relatively low proportion of male to female plants and high fertilization rates. These data are consistent with a hypothesis to explain high fertilization rates in dioecious species in lotic habitats consisting of outcrossing among adjacent plants with intermingled male and female branches within an algal cluster. Efficient reproductive strategies have been reported in dioecious, monoecious and even mixed populations of B. delicatulum and can be interpreted as adaptations to successfully colonize streams with different characteristics.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The present study aimed to quantify the proportion of 13C from energy and protein feed ingredients that follow the metabolic routing of the liver and muscle in broiler chickens. A stable isotope of carbon technique was used that is based on the isotopic discrimination that occurs in the plants during the photosynthesis process. One-day-old male chicks were subjected to treatments based on free choice of energy and protein sources. Rice bran (R) and soybean meal (S), C3 plants, have higher isotopic ratios than corn (C), a C4 plant, and corn gluten meal (G). Choices were R+S, C+G, R+G, C+S, or R+C+G+S. A complete feed (CF) was a sixth treatment. Feed intake and BW were measured at 30 d of age, when liver and breast muscle were collected for isotopic analysis. Treatments affected the amount of feed intake and the choices of energy or protein sources. Complete feed had the largest intake, differing from the other treatments that had free-choice feeding. Final BW was a direct reflection of consumption by these birds in all treatments. The isotopic results indicated that the 13C/12C ratio was generally higher in breast muscle than in liver, probably because of higher protein content. Moreover, in the liver, the proportion of 13C retained from the energy ingredient was greater than the proportion from the protein ingredient. That is in contrast to muscle, where the proportion of 13C retained from the protein ingredient was greater than from the energy ingredient that was self-selected.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The objective of this work was to evaluate the oviposition behavior of the whitefly Bemisia tabaci (Genn.) biotype B in relation to leaf position, plant age, and adult density on cotton plants. The genotype IAC 22 was used to do the tests. In free-choice tests, 20, 30 and 40 day-old plants were used to evaluate age efects and 40 day-old plants to study egg distribution in the plant and on the leaf surface. In a no-choice test, 20 day-old plants were used to evaluate densities of 50, 100 and 150 adults per plant. The lobe areas on the leaf surface and apical leaves were preferred for whitefly egg laying and therefore more suitable for egg sampling in cotton plants. The 20 day-old plants were preferred for oviposition, and the densities of 100 and 150 adults per plant ensured the number of eggs enough to discriminate cotton genotypes with different whitefly resistance degrees.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A systematic procedure of zero placement to design control systems is proposed. A state feedback controller with vector gain K is used to perform the pole placement. An estimator with vector gain L is also designed for output feedback control. A new systematic method of zero assignment to reduce the effect of the undesirable poles of the plant and also to increase the velocity error constant is presented. The methodology places the zeros in a specific region and it is based on Linear Matrix Inequalities (LMIs) framework, which is a new approach to solve this problem. Three examples illustrate the effectiveness of the proposed method.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Biopulping is a technology which application can be advantageous to mechanical or chemical pulping. It presents benefits such as the creation of stronger pulp, as well as energy or chemicals savings. This paper gives an overview of the recent efforts to develop biopulping processes in Brazil as well as provides critical information on biopulping development worldwide. Eucalyptus grandis wood chips have been biotreated by Ceriporiopsis subvermispora in a 50-ton biopulping pilot-plant and used to produce TMP and CTMP pulps on a mill scale, Up to 18% and 27% energy savings have been observed for producing 450-470 CSFreeness TMP and CTMP pulps. Despite darker bio-TMP pulps are produced, one-stage bleaching with 5% H2O2 was sufficient to improve brightness values to 70% and 72% for bio-TMP and control pulps, respectively. Understanding biopulping mechanisms is also relevant because more resistant and competitive fungal species could be selected with basis on a function-directed screen-ing project. As far as the chemical changes induced by the fungus in wood are concerned, recent efforts have pointed out for two different types of wood transformations. One of them involves intense lignin depolymerization in short biotreatment periods, while the other indicates that esterification reactions of oxalate secreted by the Jungas on the polysaccharides chains increase the water saturation point of the fibers. Both transformations are expected to affect the fiber-fiber bonding and, consequently, the physical resistance of wood.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This review present a discussion abouth the tannins. The tannins are compounds that have the ability to bind other macromolecules, reducing their availability to animal metabolism. This characteristic can be benefic or deleterious, depending on the tannin concentration degree in the plant and its structure. Positive effects are mainly related with a better use of the dietary protein and an increased efficiency of microbial protein synthesis in the rumen. The use of tannins to reduce ruminal methane emission has been subject of current researches, firmly indicating a decrease of ruminal methanogenesis. However, many of these studies, carried out to evaluate the effects of tannins on forage fermentation and animal metabolism, are based on legume plants, so their results can not be surpassed to studies concerning tanniniferous grasses. By improving the characterization of the profile and reactivity of tannins in tanniniferous forages, such as some sorghum hybrids, as well as conducting experiments to demonstrate the effects of tannins on animal metabolism and performance, the real potential of forages with tannin will be enlightened.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This paper evaluated the critical level, responsivity and boron use effciency on growth and the biomass production in six Eucalyptus grandis x Eucalyptus urophylla clones (Ca, Cb, Cc, Cd, Ce and Cf). An experiment was carried out in pots containing ground silicon, under greenhouse conditions using four boron rates per solution (0; 0.135; 0.27; 0.54 mg L -1 of B). The treatments were combined in a randomized block experimental design in a 4 × 6 factorial scheme with three replications. Plant height, stem diameter, dry matter production in the shoots of the plant and boron use effciency in the leaves, stem and total dry matter at the 8th month of age were evaluated. Due to boron fertilization, growth and shoot biomass were observed in the Eucalyptus plants after 240 days of being planted in pots. The increases in growth and biomass were 35 to 54% and 21 to 64%, respectively. The boron rates that promoted major growth of the plants were 0.33 to 0.44 mg L -1 of B and in this range the most effcient clone for dry matter production of leaves was Cf and the least effcient one to stem biomass production and the shoot biomass was Cd, no signifcant differences among other clones were observed. The critical level of boron in solution was 0.09 to 0.24 mg L -1 of B in the growth of the plants.