985 resultados para organic waste in landfills
Resumo:
ABSTRACT Aspergillus fumigatus is one of the most prevalent airbone fungal pathogen and can cause severe fatal invasive aspergillosis in immunocompromised patients. Several antifungal agents are available to treat these infections but with limited success. These agents include polyenes (amphotericin B), echinocandins (caspofungin) and azoles, which constitute the most important class with itraconazole (ITC) and voriconazole as major active compounds. Azole-derived antifungal agents target the ergosterol biosynthesis pathway via the inhibition of the lanosterol 14α-demethylase (cyp51/ERG1 1), a cytochrome P450 responsible for the conversion of lanosterol to ergosterol, which is the main component of cell membrane in fungi. A. fumigatus is also found in the environment as a contaminant of rotting plant or present in composting of organic waste. Among antifungal agents used in the environment for crop protection, the class of azoles is also widely used with propiconazole or prochloraz as examples. However, other agents such as dicarboximide (iprodione), phenylamide (benalaxyl) or strobilurin (azoxystrobin) are also used. Emergence of clinical azole-resistant isolates has been described in several European countries. However the incidence of antifungal resistance has not been yet reported in details in Switzerland. In this study, the status of antifungal resistance was investigated on A. fumigatus isolates collected from Swiss hospitals and from different environmental sites and. tested for their susceptibility to several currently used antifungal agents. The data showed a low incidence of resistance for all tested agents among clinical and environmental isolates. Only two azole-resistant environmental isolates were detected and none among the clinical tested isolates. In general, A. fumigatus was susceptible to all antifungals tested in our study, except to azoxystrobin which was the less active agent against all isolates. Since mechanisms of antifungal resistance have been poorly investigated until now in A. fumigatus, this work was aimed 1) to identify A. fumigatus genes involved in antifungal resistance and 2) to test their involvement in the development of resistance in sampled isolates. Therefore, this work proposed to isolate A. fumigatus genes conferring resistance to a drug-hypersusceptible Saccharomyces cerevisiae strain due to a lack of multidrug transporter genes. Several genes were recovered including three distinct efflux transporters (atrF, atrH and mdrA) and a bZip transcription factor, yapA. The inactivation of each transporter in A. fumigatus indicated that the transporters were involved in the basal level of azole susceptibility. The inactivation of YapA led to a hypersusceptibility to H2O2, thus confirming the involvement of this gene in the oxidative stress response of A. fumigatus. The involvement of the abovementioned transporters genes and of other transporters genes identified by genome analysis in azole resistance was tested by probing their expression in some ITC-resistant isolates. Even if upregulation of some transporters genes was observed in some investigated isolates, the correlation between azole resistance and expression levels of all these transporters genes could not be clearly established for all tested isolates. Given these results, the present work addressed 1) alteration in the expression of cyp51A encoding for the azole target enzyme, and 2) mutation(s) in the cyp51A sequence as potential mechanisms of azote resistance in A. . However, overexpression of cyp51A in the investigated isolates was not linked with azote resistance. Since it was reported that mutation(s) in cyp51A were participating in azote resistance in A. fumigatus, a functional complementation of cyp51A cDNAs from ITC-resistant A. fumigatus strains in S. cerevisiae ergl 1 Δ mutant strain was attempted. Expression in S. cerevisiae allowed the testing of these cDNAs with regards to their functionality and involvement in resistance to specific azote compounds. We could demonstrate that Cyp51A protein with a G54E or M220K mutations conferred resistance to specific azoles in S. cerevisiae, therefore suggesting that these mutations were important for the development of azote resistance in A. fumigatus. In conclusion, this work showed a correlation between ITC resistance and mechanisms involving overexpression of transporters and cyp51A mutations in A. fumigatus isolates. However, azole resistance of some isolates has not been solved and thus it will be necessary to approach the study of resistance mechanisms in this fungal species using alternative methodologies. RESUME Aspergillus fumigatus est un champignon opportuniste répandu et est la cause d'aspergilloses invasives le plus souvent fatales chez des patients immunodéprimés. Plusieurs antifongiques sont disponibles afin de traiter ces infections, cependant avec un succès limité. Ces agents incluent les polyènes (amphotericin B), les échinocandines (caspofungin) et les azoles, qui représentent la plus importante classe d'antifongiques avec l'itraconazole (ITC) et le voriconazole comme principaux agents actifs. Les dérivés azolés ciblent la voie de biosynthèse de l'ergostérol via l'inhibition de la lanostérol 14α-demethylase (cyp51/ERG11), un cytochrome P450 impliqué dans la conversion du lanostérol en ergostérol, qui est un composant important de la membrane chez les champignons. A. fumigatus est également répandu dans l'environnement. Parmi les antifongiques employés en agriculture afin de protéger les cultures, les azoles sont aussi largement utilisés. Cependant, d'autres agents tels que les dicarboximides (iprodione), les phenylamides (benalaxyl) et les strobilurines (azoxystrobin) peuvent être également utilisés. L'émergence de souches cliniques résistantes aux azoles a été décrite dans différents pays européens. Cependant, l'incidence d'une telle résistance aux azoles n'a pas encore été reportée en détails en Suisse. Dans ce travail, l'émergence de la résistance aux antifongiques a été étudiée par analyse de souches d'A. fumigatus provenant de milieux hospitaliers en Suisse et de différents sites et leur susceptibilité testée envers plusieurs antifongiques couramment utilisés. Les données obtenues ont montré une faible incidence de la résistance parmi les souches cliniques et environnementales pour les agents testés. Seulement deux souches environnementales résistantes aux azoles ont été détectées et aucune parmi les souches cliniques. Les mécanismes de résistance aux antifongiques ayant été très peu étudiés jusqu'à présent chez A. fumigatus , ce travail a eu aussi pour but 1) d'identifier les gènes d' A. fumigatus impliqués dans la résistance aux antifongiques et 2) de tester leur implication dans la résistance de certaines souches. Ainsi, il a été proposé d'isoler les gènes d' A. fumigatus pouvant conférer une résistance aux antifongiques à une souche de Saccharomyces cerevisiae hypersensible aux antifongiques. Trois transporteurs à efflux (atrF, atrH et mdrA) et un facteur de transcription appartenant à la famille des bZip (YapA) ont ainsi été isolés. L'inactivation, dans une souche d'A. fumigatus, de chacun des ces transporteurs a permis de mettre en évidence leur implication dans la susceptibilité d'A. fumigatus aux antifongiques. L'inactivation de YapA a engendré une hypersusceptibilité à l' H2O2, confirmant ainsi le rôle de ce gène dans la réponse au stress oxydatif chez A . fumigatus. La participation dans la résistance aux antifongiques des gènes codant pour des transporteurs ainsi que d'autres gènes identifiés par analyse du génome a été déterminée en testant leur niveau d'expression dans des souches résistantes à l'ITC. Bien qu'une surexpression de transporteurs ait été observée dans certaines souches, une corrélation entre la résistance à l'ITC et les niveaux d'expression de ces transporteurs n'a pu être clairement établie. Ce présent travail s'est donc porté sur l'étude de 2 autres mécanismes potentiellement impliqués dans la résistance aux azoles : 1) la surexpression de cyp51A codant pour l'enzyme cible et 2) des mutations dans cyp51A. Cependant, la surexpression de cyp51A dans les souches étudiées n'a pas été constatée. L'effet des mutations de cyp51A dans la résistance aux azoles a été testée par complémentation fonctionnelle d'une souche S. cerevisiae déletée dans son gène ERG11. L'expression de ces gènes chez S. cerevisiae a permis de démontrer que les protéines Cyp51Ap contenant une mutation G54E ou M220K pouvaient conférer une résistance spécifique à certains azoles, ainsi suggérant que ces mutations pourraient être importantes dans le développement d'une résistance aux azoles chez A. fumigatus. En conclusion, ce travail a permis de mettre en évidence, dans des souches d'A. fumigatus , une corrélation entre leur résistance à l' ITC et les mécanismes impliquant une surexpression de transporteurs et des mutations dans cyp51A. Cependant, ces mécanismes n'ont pu expliquer la résistance aux azoles de certaines souches et c'est pourquoi de nouvelles approches doivent être envisagées afin d'étudier ces mécanismes.
The effect of plantation silviculture on soil organic matter and particle-size fractions in Amazonia
Resumo:
Eucalyptus grandis and other clonal plantations cover about 3.5 million ha in Brazil. The impacts of intensively-managed short-rotation forestry on soil aggregate structure and Carbon (C) dynamics are largely undocumented in tropical ecosystems. Long-term sustainability of these systems is probably in part linked to maintenance of soil organic matter and good soil structure and aggregation, especially in areas with low-fertility soils. This study investigated soil aggregate dynamics on a clay soil and a sandy soil, each with a Eucalyptus plantation and an adjacent primary forest. Silvicultural management did not reduce total C stocks, and did not change soil bulk density. Aggregates of the managed soils did not decrease in mass as hypothesized, which indicates that soil cultivation in 6 year cycles did not cause large decreases in soil aggregation in either soil texture. Silt, clay, and C of the sandy plantation soil shifted to greater aggregate protection, which may represent a decrease in C availability. The organic matter in the clay plantation soil increased in the fractions considered less protected while this shift from C to structural forms considered more protected was not observed.
Resumo:
Microbial processes have been used as indicators of soil quality, due to the high sensitivity to small changes in management to evaluate, e.g., the impact of applying organic residues to the soil. In an experiment in a completely randomized factorial design 6 x 13 + 4, (pot without soil and residue or absolute control) the effect of following organic wastes was evaluated: pulp mill sludge, petrochemical complex sludge, municipal sewage sludge, dairy factory sewage sludge, waste from pulp industry and control (soil without organic waste) after 2, 4, 6, 12, 14, 20, 28, 36, 44, 60, 74, 86, and 98 days of incubation on some soil microbial properties, with four replications. The soil microbial activity was highly sensitive to the carbon/nitrogen ratio of the organic wastes. The amount of mineralized carbon was proportional to the quantity of soil-applied carbon. The average carbon dioxide emanating from the soil with pulp mill sludge, corresponding to soil basal respiration, was 0.141 mg C-CO2 100 g-1 soil h-1. This value is 6.4 times higher than in the control, resulting in a significant increase in the metabolic quotient from 0.005 in the control to 0.025 mg C-CO2 g-1 Cmic h-1 in the soil with pulp mill sludge. The metabolic quotient in the other treatments did not differ from the control (p < 0.01), demonstrating that these organic wastes cause no disturbance in the microbial community.
Resumo:
The objective of this work was to evaluate the effect of organic and conventional coffee crops on biomass, population density and diversity of earthworms, in Lerroville, district of Londrina County, Paraná state, Brazil. Earthworm communities were sampled in three areas with organic coffee cultivation (CO1, CO2 and CO3), two with conventional coffee (CC1 and CC2), and a native forest fragment (MT). The soil of the areas CO1, CC1, and MT was classified as Nitossolo Vermelho (Rhodic Kandiudox), while CO2, CO3, and CC2 were on Latossolo Vermelho (Rhodic Hapludox). Eight samples were taken in each area on two occasions, winter and summer, using the Tropical Soil Biology and Fertility (TSBF) method in the 0-20 cm soil layer. The earthworms were handsorted and preserved in 4% formaldehyde, and were later weighed, counted and identified. The highest earthworm biomass, both in winter and summer, occurred in the CO3 area. For population density, the higher numbers of individuals were found in CO1 and CO3. The highest number of species was identified in the organic cultivation. The adoption of organic practices in coffee cultivation favored the diversity, density and biomass of earthworm communities.
Resumo:
A very little known aspect of the scientific career of Regnault is his contribution to the emerging organic chemistry in the first half of the nineteenth century. The purpose of this article is not only to describe two of his most important researches in this field, as were the discovery of two series of halogenated derivates of certain organic compounds and the precise identification of some of the then recently discovered alkaloids, but also the main features that identified his research method. With the involvement in these subjects, Regnault unintentionally positioned himself in the midst of some of the polemics about the classification of organic compounds that characterized this age of science.
Resumo:
Agroindustrial waste in general presents significant levels of nutrients and organic matter and has therefore been frequently put to agricultural use. In this context, the objective of this study was to determine the chemical composition, nitrogen, phosphorus, potassium, calcium, magnesium and carbon content, as well as the qualitative characteristics through Fourier transform infrared spectroscopy of four samples of poultry litter and one sample of cattle manure, from the southwestern region of Paraná, Brazil. Results revealed that, in general, the poultry litter presented higher amount of nutrients and carbon than the cattle manure. The infrared spectra allowed identification of the functional groups present and the differences in degree of sample humification. The statistical treatment confirmed the quantitative and qualitative differences revealed.
Resumo:
Methane-rich landfill gas is generated when biodegradable organic wastes disposed of in landfills decompose under anaerobic conditions. Methane is a significant greenhouse gas, and landfills are its major source in Finland. Methane production in landfill depends on many factors such as the composition of waste and landfill conditions, and it can vary a lot temporally and spatially. Methane generation from waste can be estimated with various models. In this thesis three spreadsheet applications, a reaction equation and a triangular model for estimating the gas generation were introduced. The spreadsheet models introduced are IPCC Waste Model (2006), Metaanilaskentamalli by Jouko Petäjä of Finnish Environment Institute and LandGEM (3.02) of U.S. Environmental Protection Agency. All these are based on the first order decay (FOD) method. Gas recovery methods and gas emission measurements were also examined. Vertical wells and horizontal trenches are the most commonly used gas collection systems. Emission measurements chamber method, tracer method, soil core and isotope measurements, micrometeorological mass-balance and eddy covariance methods and gas measuring FID-technology were discussed. Methane production at Ämmässuo landfill of HSY Helsinki Region Environmental Services Authority was estimated with methane generation models and the results were compared with the volumes of collected gas. All spreadsheet models underestimated the methane generation at some point. LandGEM with default parameters and Metaanilaskentamalli with modified parameters corresponded best with the gas recovery numbers. Reason for the differences between evaluated and collected volumes could be e.g. that the parameter values of the degradable organic carbon (DOC) and the fraction of decomposable degradable organic carbon (DOCf) do not represent the real values well enough. Notable uncertainty is associated with the modelling results and model parameters. However, no simple explanation for the discovered differences can be given within this thesis.
Resumo:
Immobilization of Burkholderia cepacia Lipase: Kinetic Resolution in Organic Solvents, Ionic Liquids and in Their Mixtures Biocatalysis opens the door to green and sustainable processes in synthetic chemistry allowing the preparation of single enantiomers, since the enzymes are chiral and accordingly able to catalyze chemical reactions under mild conditions. Immobilization of enzymes enhances process robustness, often stabilizes and activates the enzyme, and enables reuse of the same enzyme preparation in multiple cycles. Although hundreds of variations of immobilization methods exist, there is no universal method to yield the highly active, selective and stable enzyme catalysts. Therefore, new methods need to be developed to obtain suitable catalysts for different substrates and reaction environments. Lipases are the most widely used enzymes in synthetic organic chemistry. The literature part together with the experimental part of this thesis discusses of the effects of immobilization methods mostly used to enhance lipase activity, stability and enantioselectivity. Moreover, the use of lipases in the kinetic resolution of secondary alcohols in organic solvents and in ionic liquids is discussed. The experimental work consists of the studies of immobilization of Burkholderia cepacia lipase (lipase PS) using three different methods: encapsulation in sol-gels, cross-linked enzyme aggregates (CLEAs) and supported ionic liquids enzyme catalysts (SILEs). In addition, adsorption of lipase PS on celite was studied to compare the results obtained with sol-gels, CLEAs and SILEs. The effects of immobilization on enzyme activity, enantioselectivity and hydrolysis side reactions were studied in kinetic resolution of three secondary alcohols in organic solvents, in ionic liquids (ILs), and in their mixtures. Lipase PS sol-gels were shown to be active and stable catalysts in organic solvents and solvent:IL mixtures. CLEAs and SILEs were highly active and enantioselective in organic solvents. Sol-gels and SILEs were reusable in several cycles. Hydrolysis side reaction was suppressed in the presence of sol-gels and CLEAs.
EVALUATION OF SUBSTRATES AND AMF SPORULATION IN THE PRODUCTION OF SEEDLINGS OF NATIVE FOREST SPECIES
Resumo:
ABSTRACT The objective of this study was to evaluate organic substrates in the production of canafistula (Peltophorum dubium) (Spreng.) Taub, cutieira (Joannesiaprinceps Vell.), jatoba (Hymenaea courbaril L.) and rubber tree (Hevea brasiliensis M. Arg.) seedlings, native trees with potential use in forest restoration programs. The design was completely randomized with 10 substrate formulations with 4 repetitions of 3 plants for the four species. The evaluated substrates consisted of soil, bovine manure (BM), poultry manure (PM), chemical fertilizer (CF) and sand, in different proportions. The experiment was concluded at the end of 180 days for canafistula, cutieira and rubber and 210 days for jatoba. At the end of these periods, the root (RDM), shoot (SDM) and total (TDM) the dry matters of the seedlings were determined. Quantification of AMF spores and normalization between samples through SPORES/RDM correction were also performed. The Scott-Knott test at 5% probability was applied. Regarding biomass production, only canafistula had significant difference among the tested substrates. In relation to sporulation, the highest values were observed in cutieira and rubber tree in substrate containing PM. The substrates composed of 40 or 50% soil + 20% sand + 30% or 40 PM for canafistula; 50% soil + 20% sand + 30% PM for cutieira; and for jatoba and rubber tree 60% soil + 20% sand + 20% PM, enabled the best results in terms of biomass production in seedlings and AMF sporulation.
Resumo:
Aiming to evaluate the use of sugarcane industry waste such as byproducts from vinasse concentration process, it was assessed the organomineral fertilizer BIOFOM (concentrated vinasse, filter cake, boiler ash, soot from chimneys and supplemented with mineral fertilizers). The study included characterization and agronomic potential analysis of a test plant (corn), by noting the differences between mineral fertilizers and BIOFOM fertilization until 45 days after sowing. The technology traditionally used to produce BIOFOM was based on vinasse evaporation with high heat transfer coefficients. It was observed that the technology, which can be formulated according to the needs of any crop, could be used in many cases as mineral fertilizer. Therefore, the use of this organomineral fertilizer reduces waste generation of sugarcane industry.
Resumo:
ABSTRACT Water and sewage treatment plants (STP and WTP) generate as byproduct a significant amount of sludge with environment harmful elements. Sending to landfills or depositing on the ground or rivers are respectively expensive and dangerous alternatives. In this scenario, the use of this waste in paving processes is a promising alternative for disposal thereof. In this study, we focused on characterizing sludge and evaluating its use in paving, which showed satisfactory results for use in base and sub-base floors.
Resumo:
In this thesis, biocatalysis is defined as the science of using enzymes as catalysts in organic synthesis. Environmental aspects and the continuously expanding repertoire of available enzymes have firmly established biocatalysis as a prominent means of chemo-, regio- and stereoselective synthesis. Yet, no single methodology can solve all the challenges faced by a synthetic chemist. Therefore, the knowledge and the skills to combine different synthetic methods are relevant. Lipases are highly useful enzymes in organic synthesis. In this thesis, an effort is being made to form a coherent picture of when and how can lipases be incorporated into nonenzymatic synthesis. This is attempted both in the literature review and in the discussion of the results presented in the original publications contained in the thesis. In addition to lipases, oxynitrilases were also used in the work. The experimental part of the thesis comprises of the results reported in four peer-reviewed publications and one manuscript. Selected amines, amino acids and sugar-derived cyanohydrins or their acylated derivatives were each prepared in enantio- or diastereomerically enriched form. Where applicable, attempts were made to combine the enzymatic reactions to other synthetic steps either by the application of completely separate sequential reactions with isolated intermediates (kinetic and functional kinetic resolution of amines), simultaneously occurring reactions without intermediate isolation (dynamic kinetic resolution of amino acid esters) or sequential reactions but without isolating the intermediates (hydrocyanation of sugar aldehydes with subsequent diastereoresolution). In all cases, lipase-catalyzed acylation was the key step by which stereoselectivity was achieved. Lipase from Burkholderia cepacia was a highly selective enzyme with each substrate category, but careful selection of the acyl donor and the solvent was important as well.
Resumo:
The aim of this report is to describe the current status of the waste-to-energy chain in the province of Northern Savonia in Finland. This work is part of the Baltic Sea Region Programme project Remowe-Regional Mobilizing of Sustainable Waste-to-Energy Production (2009-2012). Partnering regions across Baltic Sea countries have parallelly investigated the current status, bottle-necks and needs for development in their regions. Information about the current status is crucial for the further work within the Remowe project, e.g. in investigating the possible future status in target regions. Ultimate result from the Northern Savonia point of view will be a regional model which utilizes all available information and facilitates decision-making concerning energy utilization of waste. The report contains information on among others: - waste management system (sources, amounts, infrastructure) - energy system (use, supply, infrastructure) - administrative structure and legislation - actors and stakeholders in the waste-to-energy field, including interest and development ideas The current status of the regions will be compared in a separate Remowe report, with the focus on finding best practices that could be transferred among the regions. In this report, the current status has been defined as 2006-2009. In 2009, the municipal waste amount per capita was 479 kg/inhabitant in Finland. Industrial waste amounted 3550 kg/inhabitant, respectively. The potential bioenergy from biodegradable waste amounts 1 MWh/inhabitant in Northern Savonia. This figure includes animal manure, crops that would be suitable for energy use, sludge from municipal sewage treatment plants and separately collected biowaste. A key strategy influencing also to Remowe work is the waste plan for Eastern Finland. Currently there operate two digestion plants in Northern Savonia: Lehtoniemi municipal sewage treatment sludge digestion plant of Kuopion Vesi and the farm-scale research biogas plant of Agrifood Research Finland in Maaninka. Moreover, landfill gas is collected to energy use from Heinälamminrinne waste management centre and Silmäsuo closed landfill site, both belonging to Jätekukko Oy. Currently there is no thermal utilization of waste in Northern Savonia region. However, Jätekukko Oy is pretreating mixed waste and delivering refuse derived fuel (RDF) to Southern Finland to combustion. There is a strong willingness among seven regional waste management companies in Eastern Finland to build a waste incineration plant to Riikinneva waste management centre near city of Varkaus. The plant would use circulating fluidized bed (CFB) boiler. This would been a clear boost in waste-to-energy utilization in Northern Savonia and in many surrounding regions.
Resumo:
Operation of pulp and paper mills generates waste including wastewater treatment sludge and deinking sludge. Both sludge types are generated in large amounts and are mainly disposed of in landfills in the Leningrad Region resulting in environmental degradation. The thesis was aimed at seeking new sustainable ways of sludge utilization. Two paper mills operating in the Leningrad Region and landfilling their sludge were identified: “SCA Hygiene Products Russia” and “Knauf”. The former generates 150 t/day of deinking sludge, the latter – 145 t/day of secondary sludge. Chemical analyses of deinking sludge were performed to assess applicability of sludge in construction materials production processes. Higher heating value on dry basis of both sludge types was determined to evaluate energy potential of sludge generated in the Leningrad Region. Total energy output from sludge incineration was calculated. Deinking sludge could be utilized in the production process of “LSR-Cement” or “Slantsy Cement Plant Cesla” factories, and “Pobeda” and “Nikolsky” brick mills without exceeding current sludge management costs.
Resumo:
As the rapid development of the society as well as the lifestyle, the generation of commercial waste is getting more complicated to control. The situation of packaging waste and food waste – the main fractions of commercial waste in different countries in Europe and Asia is analyzed in order to evaluate and suggest necessary improvements for the existing waste management system in the city of Hanoi, Vietnam. From all waste generation sources of the city, a total amount of approximately 4000 tons of mixed waste is transported to the composting facility and the disposal site, which emits a huge amount of 1,6Mt of GHG emission to the environment. Recycling activity is taking place spontaneously by the informal pickers, leads to the difficulty in managing the whole system and uncertainty of the overall data. With a relative calculation, resulting in only approximately 0,17Mt CO2 equivalent emission, incinerator is suggested to be the solution of the problem with overloaded landfill and raising energy demand within the inhabitants.