Hidróxidos duplos lamelares aplicados à obtenção de biodiesel

In this paper, the Layered Double Hydroxides (LDH s) type hydrotalcite were synthesized, characterized and tested as basic heterogeneous catalysts for the production of biodiesel by transesterification of sunflower oil with methanol. The synthesis of materials Layered Double Hydroxides (LDH s) by co-precipitation method from nitrates of magnesium and aluminum, and sodium carbonate. The materials were submitted to the variation in chemical composition, which is the amount of Mg2+ ions replaced by Al3+. This variation affects the characteristic physico-chemical and reaction the solid. The molar ratio varied in the range of 1:1 and 3:1 magnesium / aluminum, and their values between 0.2 and 0.33. This study aims to evaluate the influence of variation of molar ratio of mixed oxides derived from LDH s and the influence of impregnation of a material with catalytic activity, the KI, the rate of conversion of sunflower oil into methyl esters (biodiesel) through transesterification by heterogeneous catalysis. .The catalysts were calcined at 550 ° C and characterized by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectroscopy of X-ray (SEM / EDS), thermogravimetric analysis (TG) and test basicity. The transesterification reaction was performed for reflux is a mixture of sunflower oil and methanol with a molar ratio of 15:1, a reaction time of 4h and a catalyst concentration of 2% by weight. The physical-chemical characterization of sunflower oil and biodiesel obtained by the route methyl submitted according NBR, EN, ASTM. Subsequently, it was with the chromatographic and thermogravimetric characterizations of oils. The results of chromatographic analysis showed that the catalysts were effective in converting vegetable oil into biodiesel, in particular the type hydrotalcite KI-HDL-R1, with a conversion of 99.2%, indicating the strong influence of the chemical composition of the material, in special due to presence of potassium in the structure of the catalyst

Obtenção de biodiesel através da transesterificação do óleo de farelo de arroz utilizando KI/Al2O3

This study proposes to find a biodiesel through transesterification of rice bran oil with KI/Al2O3 checking the influence of two types of alumina (Amorphous and Crystalline) for conversion into methyl esters. The catalyst was synthesized by the wet impregnation method. Adding 30 mL of 35% KI(aq.) in 10 g of alumina, under stirring at 80 °C for 3 hours. The reaction conditions used in this study were optimized, with a molar ratio methanol:oil of 15:1, 8 h of reaction time and reflux temperature. The catalyst amount was varied in the range of 1 to 5 % wt. The solid catalysts materials were analyzed by: x-ray diffraction (XRD), thermogravimetry (TG), N2 adsorption/desorption, scanning electron microscopy (SEM) and basicity, for the identification of its structure and composition, verifying the presence of basic sites. The results showed that Al2O3(A) presents an amorphous structure, high surface area and a better catalytic activity, in relation to the catalyst synthesized with Al2O3(C) support that proved to have a more crystalline structure, having as well, a lesser surface area, enabling difficulties for the incorporation of active sites. The obtained biodiesel with 5% wt. KI/Al2O3(A) presented physicochemical properties within the standards specified by the Resolution No 7/2008 ANP and obtained the best reaction yield with 95.2%, according to quantitative measurement from the TG, which showed 96.2% conversion into methyl esters. It was furthermore found that with the increasing amount of the quantity of the catalyst in the reaction, there was also an increase in the ester content obtained. The specific mass and the kinematic viscosity were reduced with the increase of the amount of quantity of the catalyst, indicating an increase in the conversion of triglycerides

Extração e análise da fração lipídica da microalga monoraphidium sp., síntese e caracterização do seu biodiesel

The cultivation of microalgae biomass in order to produce biodiesel arises as an extremely promising aspect, in that the microalgae culture includes short cycle of reproduction, smaller areas for planting and residual biomass rich in protein content. The present dissertation evaluates the performance and features, through spectrometry in the region of infrared with transformed Fourier (FTIR) and spectrometry in the region of UVvisible (UV-Vis), of the extracted lipid material (LM) using different techniques of cell wall disruption (mechanical agitation at low and at high spin and agitation associated with cavitation). The technique of gas chromatography (GC) brought to light the success of alkaline transesterification in the conversion of oil into methyl monoesters (MME), which was also analyzed by spectroscopic techniques (FTIR, proton magnetic resonance (1H NMR) and carbon (13C NMR). Through thermogravimetric analysis (TGA) were analyzed the lipid material (LM), biodiesel and the microalgae biomass. The method which provided the best results concerning the efficiency in extraction of the LP of Monoraphidium sp. (12,51%) was by mechanical agitation at high spin (14 000 rpm), for 2 hours being the ideal time, as shown by the t test. The spectroscopic techniques (1H NMR, 13C NMR and FTIR) confirmed that the structure of methyl monoesters and the chromatographic data (CG) revealed a high content of saturated fatty acid esters (about 70%) being the major constituent eicosanoic acid (33,7%), which justifies the high thermal stability of microalgae biodiesel. The TGA also ratified the conversion rate (96%) of LM into MME, pointing out the quantitative results compatible with the values obtained through GC (about 98%) and confirmed the efficiency of the extraction methods used, showing that may be a good technique to confirm the extraction of these materials. The content of LM microalgae obtained (12,51%) indicates good potential for using such material as a raw material for biodiesel production, when compared to oil content which can be obtained from traditional oil for this use, since the productivity of microalgae per hectare is much larger and requires an extremely reduced period to renew its cultivation

Caracterização de resíduo sólido formado em biodiesel de sebo bovino

Biodiesel production has increased over the last decade because of the benefits associated with this fuel, including renewability, domestic feedstock, lower toxicity, and biodegradability. From 2008, the use of beef tallow as a feedstock for biodiesel production in Brazil has increased in significance, representing the second largest source of biodiesel, after soybeans. However, the performance of biodiesel in cold weather conditions is worse than diesel because of deposition of insoluble at low temperatures, accelerating the plugging of fuel filters and injectors of the vehicle engine. Studies have been conducted on beef tallow biodiesel, mostly related to the properties of thermal and oxidative stability. However, few studies have described the nature of the precipitate formed and its influence on product quality. Research suggests that the cause of deposition is related to the nature of saturated esters and monoacylglycerols as inducing agents. This study monitored the levels of mono-, diand triacylglycerols, the oxidation stability and the cold filter plugging point (CFPP) in beef tallow biodiesel samples from two commercial producers in Brazil for a period of twelve months. Filtered precipitates were analyzed by comparative techniques of GCFID, HPLC-UV/VIS, HPLC-MS-IT-TOF and TG to verify the nature, using monopalmitin and monostearin as reference standards. The formation of precipitate reduced the levels of monoacylglycerols in the beef tallow biodiesel. GC-FID and LCMS- IT-TOF results confirmed the nature of the deposit as saturated monoacylglycerols, predominantly monostearin and monopalmitin as the second major component. Moreover the TG analysis of the residue indicated similar thermal decomposition of the reference standards. The precipitate did not affect the oxidation stability of beef tallow biodiesel and the CFPP characteristic of blends up B60. However, the presence of iron reduced significantly the oxidation stability of biodiesel

Caracterização de resíduo sólido formado em biodiesel de sebo bovino

Biodiesel production has increased over the last decade because of the benefits associated with this fuel, including renewability, domestic feedstock, lower toxicity, and biodegradability. From 2008, the use of beef tallow as a feedstock for biodiesel production in Brazil has increased in significance, representing the second largest source of biodiesel, after soybeans. However, the performance of biodiesel in cold weather conditions is worse than diesel because of deposition of insoluble at low temperatures, accelerating the plugging of fuel filters and injectors of the vehicle engine. Studies have been conducted on beef tallow biodiesel, mostly related to the properties of thermal and oxidative stability. However, few studies have described the nature of the precipitate formed and its influence on product quality. Research suggests that the cause of deposition is related to the nature of saturated esters and monoacylglycerols as inducing agents. This study monitored the levels of mono-, diand triacylglycerols, the oxidation stability and the cold filter plugging point (CFPP) in beef tallow biodiesel samples from two commercial producers in Brazil for a period of twelve months. Filtered precipitates were analyzed by comparative techniques of GCFID, HPLC-UV/VIS, HPLC-MS-IT-TOF and TG to verify the nature, using monopalmitin and monostearin as reference standards. The formation of precipitate reduced the levels of monoacylglycerols in the beef tallow biodiesel. GC-FID and LCMS- IT-TOF results confirmed the nature of the deposit as saturated monoacylglycerols, predominantly monostearin and monopalmitin as the second major component. Moreover the TG analysis of the residue indicated similar thermal decomposition of the reference standards. The precipitate did not affect the oxidation stability of beef tallow biodiesel and the CFPP characteristic of blends up B60. However, the presence of iron reduced significantly the oxidation stability of biodiesel

Síntese e caracterização de óxidos de zinco e de magnésio suportados em A1SBA-15 para produção de biodiesel

To overcome the challenge of meeting growing energy demand in a sustainable way, biodiesel has shown very promising as alternative energy can replace fossil fuels, even partially. Industrially, the biodiesel is produced by homogeneous transesterification reaction of vegetable oils in the presence of basic species used as catalysts. However, this process is the need for purification of the esters obtained and the removal of glycerin formed after the reaction. This context, the alternative catalysts have that can improve the process of biodiesel production, aiming to reduce costs and facilitate its production. In this study, the AlSBA-15 support with Si / Al ratio = 50 was synthesized, as like as the heterogeneous catalysts of zinc oxide and magnesium supported on mesoporous AlSBA-15 silica, in the concentrations of 5, 10, 15 and 30 %, relative to the support. The textural properties and structural characterization of catalysts and supports were determined by techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) coupled to the chemical analyzer, adsorption / desorption of N2, thermal analysis (TG / DTG), absorption spectroscopy in the infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Characterization results indicated that the support AlSBA-15 retained the hexagonal ordered after the incorporation of zinc oxide and magnesium oxide in the holder. For heterogeneous catalysts, ZnO-AlSBA-15, that was observed the presence of zinc oxide nanoparticles dispersed in the surface and interior channels of the mesoporous and microporous support. The catalytic activity was evaluated by the transesterification reaction of sunflower oil via methylic route, and some reaction parameters were optimized with the most active catalyst in biodiesel production by sunflower oil. For the series of heterogeneous catalysts, the sample with 30 % ZnO supported on AlSBA-15 showed a better conversion of triglyceride to methyl esters, about 95.41 % of reaction conditions: temperature 175 °C, with molar ratio of 42:1, stirring at 200 rpm and under a pressure of 14 bar for 6 h. The catalyst MgO-AlSBA-15 showed no catalytic activity in the studied reactions

Estudo da influência do biodiesel de mamona como aditivo antioxidante para o biodiesel de girassol e soja

Biodiesel is a fuel made up by mono-alkyl-esters of long chain fatty acids, derived from vegetable oils or animal fat. This fuel can be used in compression ignition engines for automotive propulsion or energy generation, as a partial or total substitute of fossil diesel fuel. Biodiesel can be processed from different mechanisms. Transesterification is the most common process for obtaining biodiesel, in which an ester compound reacts with an alcohol to form a new ester and a new alcohol. These reactions are normally catalyzed by the addition of an acid or a base. Initially sunflower, castor and soybean oil physicochemical properties are determined according to standard test methods, to evaluate if they had favorable conditions for use as raw material in the transesterification reaction. Sunflower, castor and soybean biodiesel were obtained by the methylic transesterification route in the presence of KOH and presented a yield above 93% m/m. The sunflower/castor and soybean/castor blends were studied with the aim of evaluating the thermal and oxidative stability of the biofuels. The biodiesel and blends were characterized by acid value, iodine value, density, flash point, sulfur content, and content of methanol and esters by gas chromatography (GC). Also studies of thermal and oxidative stability by Thermogravimetry (TG), Differential Scanning Calorimetry High Pressure (P-DSC) and dynamic method exothermic and Rancimat were carried out. Biodiesel sunflower and soybean are presented according to the specifications established by the Resolution ANP no 7/2008. Biodiesel from castor oil, as expected, showed a high density and kinematic viscosity. For the blends studied, the concentration of castor biodiesel to increased the density, kinematic viscosity and flash point. The addition of castor biodiesel as antioxidant in sunflower and soybean biodiesels is promising, for a significant improvement in resistance to autoxidation and therefore on its oxidative stability. The blends showed that compliance with the requirements of the ANP have been included in the range of 20-40%. This form may be used as a partial substitute of fossil diesel

Effect of intravenous alizapride on spinal morphine-induced pruritus

Background. This double-blind study was undertaken to determine whether alizapride inhibits spinal morphine-induced pruritus.Methods. Eighty-four patients undergoing Caesarean section under spinal anaesthesia (100 mg of hyperbaric lidocaine 5% plus morphine 0.2 mg) were randomly allocated to one of two groups. just after birth, alizapride-50 mg (alizapride group) or metoclopramide 10 mg (metoclopramide group) were injected i.v. Patients were assessed after surgery for pruritus (absent, mild, moderate or severe) or other untoward symptoms.Results. In the metoclopramide group, pruritus was absent in 5 (12%) patients, mild in 23 (55%), moderate in 11 (26%), and severe in 3 (7%), while in the alizapride group, these incidences were, respectively, 5 (12%), 33 (79%), 4 (10%), and 0 (P=0.045, chi(2)-test). There was no difference in the incidence of side-effects, which were all minor.Conclusions. Alizapride reduced the severity of morphine-induced pruritus.

Injeção inadvertida de metoclopramida no espaço subaracnóideo: relato de caso

JUSTIFICATIVA E OBJETIVOS: Injeção inadvertida de medicamentos de uso não espinhal nos espaços peridural e subaracnóideo é uma complicação anestésica passível de ocorrer. Este relato apresenta um caso de injeção inadvertida de metoclopramida no espaço subaracnóideo. RELATO do CASO: Paciente do sexo feminino, 17 anos, 69 kg, IMC de 26.2, estado físico ASA I, 36 semanas e 4 dias de gestação, com diagnóstico de sofrimento fetal agudo, e indicação de cesariana. Apresentava freqüência cardíaca de 82 bpm, pressão arterial de 130 x 70 mmHg, SpO2 de 97%, ritmo cardíaco sinusal regular. A anestesia foi por via subaracnóidea com a associação de anestésico local e opióide, 15 mg de bupivacaína hiperbárica a 0,5% e 25 µg de fentanil. Após 5 minutos da instalação do bloqueio, a paciente referiu mal estar inespecífico. Aferidas pressão arterial, 190 x 120 mmHg, freqüência cardíaca, 145 bpm, e SpO2, 95%. Verificando-se as ampolas cujos conteúdos foram administrados encontrou-se uma de bupivacaína e uma de metoclopramida. O quadro se apresentou com cefaléia frontal intensa, visão turva, náuseas, vômitos e agitação inicial, que evoluiu para sonolência e torpor, além de hipertensão arterial e taquicardia. Foram administrados tramadol, dipirona, ondansetron e medidas de suporte. Após 30 minutos, a paciente apresentava-se assintomática, com PA de 150 x 100 mmHg e FC de 120 bpm. Recebeu alta para a enfermaria 140 minutos após permanência na SRPA, com total reversão dos bloqueios motor, sensitivo e autonômico, e normalização dos parâmetros hemodinâmicos. Recebeu alta hospitalar 48 horas após, sem apresentar seqüelas neurológicas, juntamente com o recém-nascido. CONCLUSÕES: Máxima atenção deve ser dada a qualquer medicamento administrado, seja qual for à via utilizada. Padronização de cores de ampolas, e dos locais de depósito, com o intuito de diminuir este tipo de acidente é recomendável.

Efeitos adversos do sufentanil associado ao anestésico local pelas vias subaracnóidea e peridural em pacientes submetidas à analgesia de parto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of high-dose fentanyl on renal function in dogs

OBJETIVOS: Estudamos os efeitos de alta dose de fentanil (F) em atributos de função renal (FR) do cão. DESENHO: Anestesiamos com pentobarbital sódico (PS) 16 cães divididos aleatoriamente em 2 grupos: manutenção com PS (Gi) e PS com F (0,05 mg.kg-1) (G2). INTERVENÇÃO: os cães foram ventilados artificialmente e tiveram cateterizadas as veias femorais esquerda e direita e a artéria femoral esquerda para infusão de drogas e coleta de dados hemodinâmicos e de sangue para dosagens laboratoriais. Coletou-se urina durante todo experimento. MENSURAÇÃO: Determinaram-se os valores de atributos de FR.. RESULTADOS: PS não mudou a FR e o comportamento de G1 deveu-se à expansão do volume extracelular. O F diminuiu significativamente freqüência cardíaca, pressão arterial média, clearance de creatinina, volume urinário, clearance osmolar e excreção fracionária de sódio e potássio. CONCLUSÕES: A diminuição da FR foi provavelmente devida às alterações hemodinâmicas induzidas pelo F, não se descartando possível ação da aldosterona.

Comparative study between target-controlled-infusion and continuous-infusion anesthesia in dogs treated with methotrimeprazine and treated with propofol and remifentanil

OBJETIVO: Comparar duas técnicas de infusão de propofol em cadelas submetidas à ovariohisterectomia, estudando a eficácia da dose alvo de propofol, avaliando os atributos cardiorrespiratórios, hemogasométricos e escala do índice bispectral, (BIS) bem como as características do período de recuperação. MÉTODOS: Foram anestesiadas 20 cadelas, distribuídos em dois grupos (GI e GII). em GI, os animais foram pré-tratados com levomepromazina e anestesiados com propofol por infusão alvo controlada, através de bomba de infusão Harvard pump, associado com remifentanila, através de bomba de seringa. em GII, os animais receberam o mesmo tratamento de GI, só que ao invés de receberem o propofol por infusão alvo controlada, receberam o propofol em infusão contínua de velocidade fixa. RESULTADOS: Bradicardia e discreta hipotensão, estabilidade hemogasométrica e respiratória, além de um bom miorrelaxamento, mais evidente na infusão contínua e boa hipnose. CONCLUSÕES: As doses de propofol utilizadas em ambas as técnicas, após o pré-tratamento de levomepromazina e associadas ao opióide, foram eficazes para a realização cirúrgica. A técnica de anestesia alvo controlada obteve um menor consumo de anestésico (propofol) com períodos mais rápidos de recuperação.

Comparative study on the sedative effects of morphine, methadone, butorphanol or tramadol, in combination with acepromazine, in dogs

To compare the effects of morphine (MOR), methadone (MET), butorphanol (BUT) and tramadol (TRA), in combination with acepromazine, on sedation, cardiorespiratory variables, body temperature and incidence of emesis in dogs.Prospective randomized, blinded, experimental trial.Six adult mixed-breed male dogs weighing 12.0 +/- 4.3 kg.Dogs received intravenous administration (IV) of acepromazine (0.05 mg kg(-1)) and 15 minutes later, one of four opioids was randomly administered IV in a cross-over design, with at least 1-week intervals. Dogs then received MOR 0.5 mg kg(-1); MET 0.5 mg kg(-1); BUT 0.15 mg kg(-1); or TRA 2.0 mg kg(-1). Indirect systolic arterial pressure (SAP), heart rate (HR), respiratory rate (f(R)), rectal temperature, pedal withdrawal reflex and sedation were evaluated at regular intervals for 90 minutes.Acepromazine administration decreased SAP, HR and temperature and produced mild sedation. All opioids further decreased temperature and MOR, BUT and TRA were associated with further decreases in HR. Tramadol decreased SAP whereas BUT decreased f(R) compared with values before opioid administration. Retching was observed in five of six dogs and vomiting occurred in one dog in MOR, but not in any dog in the remaining treatments. Sedation scores were greater in MET followed by MOR and BUT. Tramadol was associated with minor changes in sedation produced by acepromazine alone.When used with acepromazine, MET appears to provide better sedation than MOR, BUT and TRA. If vomiting is to be avoided, MET, BUT and TRA may be better options than MOR.

Effects of the opiold remifentanil on the arrhythmogenicity of epinephrine in halothane-anesthetized dogs

Opioids may exert a protective effect against ventricular arrhythmias via a vagally mediated mechanism. This study evaluated the effects of the opioid remifentanil on arrhythmogenicity of epinephrine during halothane anesthesia. Eight dogs were assigned to 2 treatments in a randomized crossover design, with 1-week intervals between treatments. Anesthesia was maintained with 1.3% end-tidal halothane in oxygen and mechanical ventilation to maintain eucapnia. A constant rate infusion of remifentanil (0.72 mu g/kg/min) was administered throughout the study in the experimental treatment, while control animals received physiologic saline as placebo. The arrhythmogenic dose of epinephrine (ADE), defined as 4 premature ventricular complexes (PVCs) within 15 s, was determined by administering progressively increasing infusion rates of epinephrine (2.5, 5.0, and 10 mu g/kg/min), allowing 20 min intervals between each infusion rate. In both treatments, epinephrine infusions induced bradyarrhythmias and atrioventricular conduction disturbances, which were followed by escape beats and PVCs. In the remifentanil treatment, mean s ADE values (11.3 +/- 4.9 mu g/kg) did not differ from values observed in control animals (9.9 +/- 6.1 mu g/kg). on the basis of the ADE model for assessing the arrhythmogenity of drugs during halothane anesthesia, the present study did not demonstrate a protective effect of remifentanil (0.72 mu g/kg/min) against ventricular arrhythmias in dogs.

Hemodynamic effects of butorphanol in desflurane-anesthetized dogs

Objective To evaluate the effects of butorphanol on cardiopulmonary parameters in dogs anesthetized with desflurane and breathing spontaneously.Study design Prospective, randomized experimental trial.Animals Twenty dogs weighing 12 +/- 3 kg.Methods Animals were distributed into two groups: a control group (CG) and butorphanol group (BG). Propofol was used for induction and anesthesia was maintained with desflurane (10%). Forty minutes after induction, the dogs in the CG received sodium chloride 0.9% (0.05 mL kg(-1) IM), and dogs in the BG received butorphanol (0.4 mg kg(-1) IM). The first measurements of body temperature (BT), heart rate (HR), arterial pressures (AP), cardiac output (CO), cardiac index (CI), central venous pressure (CVP), stroke volume index (SVI), pulmonary arterial occlusion pressure (PAOP), mean pulmonary arterial pressure (mPAP), left ventricular stroke work (LVSW), systemic (SVR) and pulmonary (PVR) vascular resistances, respiratory rate (fR), and arterial oxygen (PaO(2)) and carbon dioxide (PaCO(2)) partial pressures were taken immediately before the administration of butorphanol or sodium chloride solution (T0) and then at 15-minute intervals (T15-T75).Results In the BG, HR, AP, mPAP and SVR decreased significantly from T15 to T75 compared to baseline. fR was lower at T30 than at T0 in the BG. AP and fR were significantly lower than in the CG from T15 to T75. PVR was lower in the BG than in the CG at T30, while PaCO(2) was higher compared with T0 from T30 to T75 in the BG and significantly higher than in the CG at T30 to T75.Conclusions and clinical relevance At the studied dose, butorphanol caused hypotension and decreased ventilation during desflurane anesthesia in dogs. The hypotension (from 86 +/- 10 to 64 +/- 10 mmHg) is clinically relevant, despite the maintenance of cardiac index.