924 resultados para multiple group analysis
Resumo:
Este estudo buscou verificar a influencia dos agentes da cadeia de suprimentos no desempenho do desenvolvimento de novos produtos quando os agentes são analisados em conjunto. A motivação desta pesquisa veio de estudos que alertaram para a consideração da integração da cadeia de suprimentos como um constructo multidimensional, englobando o envolvimento da manufatura, fornecedores e clientes no desenvolvimento de novos produtos; e devido à falta de informação sobre as influencias individuais destes agentes no desenvolvimento de novos produtos. Sob essas considerações, buscou-se construir um modelo analítico baseado na Teoria do Capital Social e Capacidade Absortiva, construir hipóteses a partir da revisão da literatura e conectar constructos como cooperação, envolvimento do fornecedor no desenvolvimento de novos produtos (DNP), envolvimento do cliente no DNP, envolvimento da manufatura no DNP, antecipação de novas tecnologias, melhoria contínua, desempenho operacional do DNP, desempenho de mercado do NPD e desempenho de negócio do DNP. Para testar as hipóteses foram consideradas três variáveis moderadoras, tais como turbulência ambiental (baixa, média e alta), indústria (eletrônicos, maquinários e equipamentos de transporte) e localização (América, Europa e Ásia). Para testar o modelo foram usados dados do projeto High Performance Manufacturing que contém 339 empresas das indústrias de eletrônicos, maquinários e equipamentos de transporte, localizadas em onze países. As hipóteses foram testadas por meio da Análise Fatorial Confirmatória (AFC) incluindo a moderação muti-grupo para as três variáveis moderadoras mencionadas anteriormente. Os principais resultados apontaram que as hipóteses relacionadas com cooperação foram confirmadas em ambientes de média turbulência, enquanto as hipóteses relacionadas ao desempenho no DNP foram confirmadas em ambientes de baixa turbulência ambiental e em países asiáticos. Adicionalmente, sob as mesmas condições, fornecedores, clientes e manufatura influenciam diferentemente no desempenho de novos produtos. Assim, o envolvimento de fornecedores influencia diretamente no desempenho operacional e indiretamente no desempenho de mercado e de negócio em baixos níveis de turbulência ambiental, na indústria de equipamentos de transporte em países da Americanos e Europeus. De igual forma, o envolvimento do cliente influenciou diretamente no desempenho operacional e indiretamente no desempenho de mercado e do negócio em médio nível de turbulência ambiental, na indústria de maquinários e em países Asiáticos. Fornecedores e clientes não influenciam diretamente no desempenho de mercado e do negócio e não influenciam indiretamente no desempenho operacional. O envolvimento da manufatura não influenciou nenhum tipo de desempenho do desenvolvimento de novos produtos em todos os cenários testados.
Resumo:
Durante a recente crise da dívida soberana europeia, os fundos soberanos demonstraram seu peso na esfera financeira global. Contribuíram para salvar o sistema financeiro dos países desenvolvidos, distribuindo créditos que as entidades financeiras tradicionais do Norte não podiam mais providenciar. Em 2012, os ativos totais desses fundos atingiram USD 4.620 bilhões, comparado aos USD 3.355 bilhões de antes da crise, no final de 2007 (Preqin, 2012). Sendo quase todos criados por economias em desenvolvimento ou subdesenvolvidas, os fundos soberanos podem então ser vistos como o símbolo de um recente reequilíbrio do poder a favor desses países (Santiso, 2008). Além disso, em um futuro próximo, espera-se que os fundos soberanos afastem-se dos países desenvolvidos para investir mais em países em desenvolvimento. Nesse contexto, os países africanos estão cada vez mais alvos de investimentos dos fundos (Triki & Faye, 2011). O estudo subjacente analisa dois fundos, o IFC ALAC e o Mubadala Development Company, para entender como, de acordo com as percepções dos seus gestores, os fundos soberanos podem ajudar no desenvolvimento dos países beneficiários. Mais precisamente, trata-se definir, através de um estudo de casos múltiplos, quais são os mecanismos pelos quais os fundos soberanos podem impactar o desenvolvimento da África ocidental. Os resultados sugerem que, segundo os gestores, os fundos soberanos podem desempenhar um papel significativo no desenvolvimento dos países beneficiários. Eles investem em alguns setores-chave da economia (bancos, infraestruturas etc.), criando condições favoráveis ao desenvolvimento local. Além disso, através de um efeito multiplicador, os investimentos dos fundos soberanos alavancam novos investimentos do setor privado local ou global, fortalecendo o tecido industrial e produtivo do país beneficiário. Porém, parece que as empresas beneficiárias não ajudam nas transferências de conhecimento e de tecnologia, embora sejam essenciais para o desenvolvimento econômico, e se limitam a programas de treinamento específico e de RSE. Além disso, apesar dos investimentos de fundos soberanos impulsionarem o crescimento da região, eles também podem agravar a dependência dessas economias à exportação de commodities. Finalmente, os impactos positivos dos fundos soberanos sobre a economia regional são muitas vezes reduzidos devido a conflitos políticos e barreiras estruturais exigindo reformas profundas e de longo prazo.
Resumo:
In a reccnt paper. Bai and Perron (1998) considcrccl theoretical issues relatec\ lo lhe limiting distriblltion of estimators and test. statist.ics in the linear model \\'ith multiplc struct ural changes. \Ve assess. via simulations, the adequacy of the \'arious I1Iethods suggested. These CO\'er the size and power of tests for structural changes. the cO\'erage rates of the confidence Íntervals for the break dates and the relat.Í\'e merits of methods to select the I1umber of breaks. The \'arious data generating processes considered alIo,,' for general conditions OIl the data and the errors including differellces across segmcll(s. Yarious practical recommendations are made.
Resumo:
Brazil is under political and financial crises where the end seems far away. Because of that, researchers argue that the hotel rooms offered by Rio de Janeiro, built to host the Olympic Games 2016, will be difficult to occupy after the event. It is then necessary for the hotels to understand how guests perceive the service quality in order to adapt to this new era. If guests’ perceptions meet or exceed their expectations, they will be satisfied and will probably return. Thus based on the SERVQUAL approach, this paper aims to study the impact of the service dimensions on the guests’ overall satisfaction at hotels of Rio de Janeiro. Two hotels were considered representative of the city in terms of service quality and customers’ profile. Interviews to the hotel managers were performed, and questionnaires to the guests were administered. Among the five SERVQUAL dimensions – Reliability, Tangibles, Responsiveness, Assurance, and Empathy – the Empathy dimension appears to be the only one that affects the guests’ overall satisfaction. The study could also identify that gender, country of residence, home country and family income have an impact on guests’ satisfaction. This study has no intention of generalization, but rather of refining the theory about services and the SERVQUAL model.
Resumo:
This document has been prepared in compliance with Activity III.1.2 of the Work Programme of SELA for the year 2015, entitled “Analysis of the economic and financial relations between Latin America and the Caribbean and the BRICS countries”. The document comprises an introduction, four chapters and a final section with the conclusions and recommendations stemming from the study. Chapter I describes the economic performance of the BRICS countries, their economic relations with Latin America and the Caribbean and the functioning of the development banks of the member countries. Chapter II assesses the financial architecture of Latin America and the Caribbean and explores the needs for financing in the region. Chapter III deals with the regulatory frameworks governing public and private investments in Latin America and the Caribbean and the Bilateral Investment Treaties with the BRICS countries. Finally, Chapter IV describes the main features of the New Development Bank (NDB) and the Contingent Reserve Agreement of the BRICS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Low level laser therapy (LLLT) is known for its positive results but studies on the biological and biomodulator characteristics of the effects produced in the skeletal muscle are Still lacking. In this Study the effects of two laser dosages, 5 or 10 J/cm(2), on the lesioned tibial muscle were compared. Gerbils previously lesioned by 100 g load impact were divided into three groups: GI (n = 5) controls, lesion non-irradiated; GII (n = 5), lesion irradiated with 5 J/Cm(2) and GIII (n = 5), lesion irradiated with 10 J/cm(2), and treated for 7 consecutive days with a laser He-Ne (lambda = 633 rim). After intracardiac perfusion, the muscles were dissected and reduced to small fragments, post-fixed in 1% osmium tetroxide, dehydrated in increasing alcohol concentrations, treated with propylene oxide and embedded in Spurr resin at 60 degrees C. Ultrafine Cuts examined on a transmission electron microscope (Jeol 1010) revealed in the control GI group a large number of altered Muscle fibers with degenerating mitochondria, intercellular substance containing degenerating cell fragments and budding blood capillaries with Underdeveloped endothelial cells. However, groups GII and GIII showed muscle fibers with few altered myofibrils, regularly contoured mitochondria, ample intermembrane spaces and dilated mitochondrial crests. The clean intercellular Substance showed numerous collagen fibers and capillaries with multiple abluminal processes, intraluminal protrusions and several pinocytic vesicles in endothelial cells. it was concluded that laser dosages of 5 or 10 J/cm(2) delivered by laser He-Ne (lambda = 633 rim) during 7 consecutive days increase mitochondrial activity in muscular fibers, activate fibroblasts and macrophages and stimulate angiogenesis, thus suggesting effectivity of laser therapy tinder these experimental conditions. (C) 2009 Elsevier Ltd. All rights reserved.
Resumo:
Background: It has become an accepted procedure to transfer more than one embryo to the patient to achieve acceptable ongoing pregnancy rates. However, transfers of more than a single embryo increase the probability of establishing a multiple gestation. Single-embryo transfer can minimize twin pregnancies but may also lower live birth rates. This meta-analysis aimed to compare current data on single-embryo versus double-embryo transfer in fresh IVF/ICSI cycles with respect to implantation, ongoing pregnancy and live birth rates.Methods: Search strategies included on-line surveys of databases from 1995 to 2008. Data management and analysis were conducted using the Stats Direct statistical software. The fixed-effect model was used for odds ratio (OR). Fixed-effect effectiveness was evaluated by the Mantel Haenszel method. Seven trials fulfilled the inclusion criteria.Results: When pooling results under the fixed-effect model, the implantation rate was not significantly different between double-embryo transfer (34.5%) and single-embryo transfer group (34.7%) (P = 0.96; OR = 0.99, 95% CI 0.78, 1.25). on the other hand, double-embryo transfer produced a statistically significantly higher ongoing clinical pregnancy rate (44.5%) than single-embryo transfer (28.3%) (P < 0.0001; OR: 2.06, 95% CI = 1.64,2.60). At the same time, pooling results presented a significantly higher live birth rate when double-embryo transfer (42.5%) (P < 0.001; OR: 1.87, 95% CI = 1.44,2.42) was compared with single-embryo transfer (28.4%).Conclusion: Meta-analysis with 95% confidence showed that, despite similar implantation rates, fresh double-embryo transfer had a 1.64 to 2.60 times greater ongoing pregnancy rate and 1.44 to 2.42 times greater live birth rate than single-embryo transfer in a population suitable for ART treatment.
Resumo:
Objective: In an attempt to clarify the clonality and genetic relationships that are involved in the tumorigenesis of uterine leiomyomas, we used a total of 43 multiple leiomyomas from 14 patients and analyzed the allelic status with 15 microsatellite markers and X chromosome inactivation analysis.Study design: We have used a set of 15 microsatellite polymorphism markers mapped on 3q, 7p, 11, and 15q by automated analysis. The X chromosome inactivation was evaluated by the methylation status of the X-linked androgen receptor gene.Results: Loss of heterozygosity analysis showed a different pattern in 7 of the 8 cases with allelic loss for at least 1 of 15 microsatellite markers that were analyzed. A similar loss of heterozygosity findings at 7p22-15 was detected in 3 samples from the same patient. X chromosome inactivation analysis demonstrated the same inactivated allele in all tumors of the 9 of 12 informative patients;. different inactivation patterns were observed in 3 cases.Conclusion: Our data support the concept that uterine leiomyomas are derived from a single cell but are generated independently in the uterus. Loss of heterozygosity findings at 7p22-15 are consistent with previous data that suggested the relevance of chromosomal aberrations at 7p that were involved in individual uterine leiomyomas. (C) 2005 Mosby, Inc. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The aim of this study was to evaluate the tensile strength of orthodontic wires bonded onto the enamel with cyanoacrylate ester. To obtain the specimens, 120 human premolars (extracted for orthodontic or periodontal reasons) were included in acrylic blocks of rapid polymerization with three teeth each. Four groups were formed with ten specimens each. In the specimens, a dental splint model was made with cyanoacrylate ester and round stainless steel wire. In groups I, II and III, cyanoacrylate ester was used with round steel wires, with variation in diameter: 0.014 inches; 0.016 inches and 0.018 inches, respectively. In group IV, round steel wire 0.018 inches was used with photo polymerizing resin composite with previous acid etching. The adhesive force of the materials was measured in two points under the action of the tensiometer (ETM-USA). The number of loose wires was counted along with those that remained fixed according to the different levels of force applied because of the direction of the tensile force (vertical or horizontal) and the diameter of the wire used. The data obtained were first submitted to a descriptive analysis and then submitted to a statistical analysis (Friedman's Test and Dunn's Test of Multiple Comparison - Epi-info 3.2). Within the limitations of the experimental conditions presented, the cyanoacrylate ester or 'Super Bonder (R)' maintained bonded to enamel and steel wires (0.016 and 0.018 inches) during the tensile strength tests under different levels of applied forces.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)