SUGARCANE BAGASSE PULPING and BLEACHING: THERMAL and CHEMICAL CHARACTERIZATION

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de componentes nanométricos para aplicação em células a combustível à base de sólidos estruturados e filmes finos

The present work aims the preparation of filmes of strontium-doped lanthanum manganite (perovskita) yttria-stabilized zirconia (LSM-SDC) films deposited on substrate of YSZ by means of spin coating technique having as principal objective their application to solid oxide fuel cells of intermediate temperature. La0,8Sr0,2MnO3 and Ce0,8Sm0,2O1,9 were obtained by modified Pechini method by use of gelatin which act as polymerization agent. The powders obtained were characterized by Xray fluorescence, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The results obtained by X-ray fluorescence showed that the route adopted for obtention of powders was effective in the obtention of the compositions with close values to the stoichiometrics. Ethyl cellulose was used as pore-forming agent and mixed with the LSM-SDC powders in weight proportions of 1:24, 2:23 and 1:9. The films were sintered at 1150 °C for 4 h and characterized by X-ray diffraction and scanning electron microscopy technique (SEM) and atomic force. The phases quantification of the precursory powders and of the obtained films was carried through Rietveld method. According with the analysis of SEM, as the content of ethyl cellulose was increased, the pore distribution in films become more uniform and the pore size reduced. The methodology used for the obtention of the films was very efficient, considering a material was obtained with characteristics that were proper to the application as electrolyte/cathode system to solid oxide fuel cells

Preparação de membranas de acetato de celulose organomodificadas para adsorção dos íons Cu(II), Cd(II), Mn(II) e Ni(II)

Cellulose acetate polymeric membranes had been prepared by a procedure of two steps, combining the method of phase inversion and the technique of hydrolysis-deposition. The first step was the preparation of the membrane, and together was organomodified with tetraethylortosilicate and 3-aminopropyltrietoxysilane. Parameters that exert influence in the complexation of the metallic ion, as pH, time of complexation, metal concentration, had been studied in laboratory using tests of metal removal. The membranes had presented resistance mechanics and reactivity to cations, being able to be an alternative for the removal, daily pay-concentration or in the study of the lability of metals complexed.

Uso do pó da palha de carnaúba em compósitos de quitosana

In this work a biodegradable composite using the carnauba straw s powder as reinforcement on chitosan matrix polymeric were manufactured. Firstly, were carried out the chemistry characterization of the carnauba straw s powder before and after treatments with NaOH and hexane. Goering and Van Soest method (1970), flotation test, moisture absorption, FTIR, TG/DTG, DSC and SEM have also being carried out. Composites were developed with variations in granulometry and in powder concentrations. They were characterized by TG/DTG, SEM and mechanicals properties. The results of chemical composition showed that the carnauba straw s powder is composed of 41% of cellulose; 28,9% of hemicellulose and 14% of lignin.The flotation test have indicated that the chemical treatment with NaOH decreased the powder s hidrophilicity.The thermal analysis showed increased of thermal stability of material after treatments. The results of FTIR and SEM revealed the removal of soluble materials from the powder (hemicelluloses and lignin), the material became rougher and clean. The composites obtained showed that the mechanicals properties of the composites were decreased in respect at chitosan films, and the composites with the powder at 150 Mesh showed less variation in the modulus values. The speed test of 10 mm/min showed the better reproducibility of the results and is in agreement to the standard ASTM D638. The SEM analysis of fracture showed the low adhesion between the fiber/matrix. The increase of volume of powder in the composite caused a decrease in values of stress and strain for the samples with untreated powder and treated with hexane. The composite with 50% of the powder s treated in NaOH didn t have significant variation in the values of stress and strain as compared with the composites with 10% of the powder, showing that the increase in the volume of fiber didn t affect the stress and strain of the composite. Thereby, it is concluded that the manufacture of polymeric composites of chitosan using carnauba straw s powder can be done, without need for pre-treatment of reinforcement, become the couple of carnauba straw s powder-chitosan a good alternative for biodegradable composites

Comparação de custos de implantação de eucalipto com resíduo celulósico em substituição ao fertilizante mineral

A grande expansão das indústrias e do mercado consumidor tem provocado, nas últimas décadas, a geração de elevadas quantidades de resíduos, os quais têm constituído constante preocupação econômica e ambiental. Objetivou-se, neste trabalho, analisar a viabilidade econômica do uso de três doses de composto orgânico, oriundo da compostagem de resíduos da extração da celulose, em substituição à adubação mineral, na cultura do eucalipto, no município de Selvíria, MS. A metodologia de custos adotada foi a do custo operacional total e do custo total. Concluiu-se que, por causa do elevado custo de transporte e aplicação, a adubação orgânica mostrou-se mais onerosa em relação à mineral, sendo sua utilização viável, economicamente, apenas nas proximidades da indústria produtora.

Avaliação das propriedades físico-químicas de sistemas a base de carboximetilcelulose e poli (N-isopropilacrilamida) em soluções aquosas para aplicação na indústria do petróleo

Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers

Produtividade e valor nutricional de variedades de cana-de-açúcar sob diferentes fontes de fósforo

Due to the expansion of sugarcane in areas that are not traditional in it's cultivation, there is need of study the management of fertilizer, mainly phosphorus, since it's the nutrient that most limits the production in the tropics. The aim of this work was to evaluate the productivity and nutritional value of two varieties of sugarcane grown under different phosphorus sources, for three production cycles in North of Mato Grosso State, Brazil. The experimental design was randomized blocks in factorial scheme 4x2, with four replications. The sources of phosphorus used were bone meal, Arad phosphate and triple superphosphate at a dose of 100 kg P2O5 ha(-1), and a control without nutrient application at planting. The varieties of sugarcane were planted IAC86-2480 and SP79-1011. We evaluated the productivity of dry matter, dry matter content, neutral detergent fiber and acid detergent, lignin, cellulose, in vitro digestibility and crude protein of forage. The phosphorus sources provided higher yields during the first cycle of sugarcane and did not cause significant effect on productivity in subsequent cycles. Phosphorus fertilization did not cause significant changes in the nutritional value of sugarcane. The variety IAC86-2480 showed higher crude protein content in three cycles and higher dry matter yield in the first two cycles, compared to SP79-1011. Regarding the fiber constituents, both showed similar results.

Screening and Production Study of Microbial Xylanase Producers from Brazilian Cerrado

Hemicelluloses are polysaccharides of low molecular weight containing 100 to 200 glycosidic residues. In plants, the xylans or the hemicelluloses are situated between the lignin and the collection of cellulose fibers underneath. The xylan is the most common hemicellulosic polysaccharide in cell walls of land plants, comprising a backbone of xylose residues linked by beta-1,4-glycosidic bonds. So, xylanolytic enzymes from microorganism have attracted a great deal of attention in the last decade, particularly because of their biotechnological characteristics in various industrial processes, related to food, feed, ethanol, pulp, and paper industries. A microbial screening of xylanase producer was carried out in Brazilian Cerrado area in Selviria city, Mato Grosso do Sul State, Brazil. About 50 bacterial strains and 15 fungal strains were isolated from soil sample at 35 A degrees C. Between these isolated microorganisms, a bacterium Lysinibacillus sp. and a fungus Neosartorya spinosa as good xylanase producers were identified. Based on identification processes, Lysinibacillus sp. is a new species and the xylanase production by this bacterial genus was not reported yet. Similarly, it has not reported about xylanase production from N. spinosa. The bacterial strain P5B1 identified as Lysinibacillus sp. was cultivated on submerged fermentation using as substrate xylan, wheat bran, corn straw, corncob, and sugar cane bagasse. Corn straw and wheat bran show a good xylanase activity after 72 h of fermentation. A fungus identified as N. spinosa (strain P2D16) was cultivated on solid-state fermentation using as substrate source wheat bran, wheat bran plus sawdust, corn straw, corncob, cassava bran, and sugar cane bagasse. Wheat bran and corncobs show the better xylanase production after 72 h of fermentation. Both crude xylanases were characterized and a bacterial xylanase shows optimum pH for enzyme activity at 6.0, whereas a fungal xylanase has optimum pH at 5.0-5.5. They were stable in the pH range 5.0-10.0 and 5.5-8.5 for bacterial and fungal xylanase, respectively. The optimum temperatures were 55C and 60 A degrees C for bacterial and fungal xylanase, respectively, and they were thermally stable up to 50 A degrees C.

Uso de membrana biossintética a base de celulose na regeneração tecidual guiada

Guided Tissue Regeneration (GTR) is a regenerative treatment modality that requires the placement of a physical barrier over a bone defect in such a way that the proliferation of the surrounding soft tissues into the barrier-protected area is prevented. Thereby in the guided osseous regeneration allowing bone-forming cells from the existent bone edges to invade the space and produce bone. The physical barriers should be biocompatible, allow cellular occlusion, maintain adequate space, tissue integration and facility in the application. They can be occlusive or permeable, absorbable or non-absorbable. Among various types of physical barriers in the market, the cellulose biosynthetic membrane is emphasizing by the necessary characteristics for GTR and to be a national product developed in low cost.

Análises histológica e morfométrica do uso de membrana biossintética de celulose em trocleoplastia experimental de cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Implante de condrócitos homólogos em defeitos osteocondrais de cães: padronização da técnica e avaliação histopatológica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Liberação intraocular de ofloxacina associada a lente de contato biossintética em ceratite bacteriana experimental em cães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preference of Atta capiguara (Hymenoptera, Formicidae) for Different Grasses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of corn processing provided in the diet on the ruminal dynamics of dairy steer

Objetivou-se com este trabalho avaliar a dinâmica ruminal de novilhos leiteiros recebendo dietas contendo grão de milho inteiro, milho moído na forma de quirera ou milho inteiro tratado com ureia. Para isso, foram mantidos em regime de confinamento seis animais fistulados no rúmen alimentados com dietas com teores semelhantes de energia e proteína. A dieta foi formulada com relação volumoso:concentrado de 40:60 na matéria seca e continha silagem de sorgo como volumoso. O delineamento utilizado foi na forma de um quadrado latino 3 × 3, com três animais e três períodos, e foi repetido duas ou quatro vezes conforme o parâmetro estudado, totalizando seis ou 12 repetições por dieta. O tratamento do grão de milho não influenciou o pH do líquido ruminal nem a degradabilidade ruminal da matéria seca, fibra em detergente ácido e celulose. Todas as dietas propiciaram concentração de N-amoniacal adequada para o crescimento microbiano ruminal; todavia, nos animais alimentados com grão de milho inteiro tratado com ureia, essa concentração foi significativamente menor. A atividade bacteriana é menor em animais alimentados com dietas contendo milho moído e não difere entre os animais alimentados com grão de milho inteiro ou grão de milho inteiro tratado com ureia.

Tratamento do feno de braquiária pelo fungo Pleurotus ostreatus

A inoculação de forragens com fungos lignocelulolíticos é uma opção para melhorar a qualidade destas sem adição de produtos químicos. O tratamento do substrato influencia a ação do fungo e a qualidade final do produto. Neste experimento, aplicaram-se quatro tratamentos (compostagem do feno inteiro, compostagem do feno picado, hidratação do feno em água fria e hidratação do feno em água quente) a um feno de Brachiaria decumbens. Aos tratamentos seguiu-se inoculação com o fungo Pleurotus ostreatus e incubação por 35 dias, sob temperatura controlada. Usou-se o delineamento inteiramente casualizado, com quatro repetições e medidas repetidas. Amostras foram colhidas semanalmente para acompanhar a degradação do substrato, mediante a análise química do feno. Observou-se aumento linear, com o decorrer do tempo, no teor de proteína bruta (PB) e na proporção de lignina na parede celular (LIG-FDN), e decréscimo linear nos valores de fibra em detergente neutro (FDN), celulose e hemicelulose. Não se observou efeito de tratamento no teor de FDA. Os tratamentos com compostagem apresentaram maiores valores de PB, lignina e LIG-FDN e menores de FDN e hemicelulose. Não se observou diferença entre os tratamentos com hidratação. O tratamento do feno de braquiária com o fungo propiciou degradação da fração fibrosa e aumento no teor de PB, com efeito mais intenso nos tratamentos que usaram compostagem. A ação do fungo foi mais efetiva sobre a hemicelulose que sobre os demais componentes da fibra.