Procedure for human saphenous veins ex vivo perfusion and external reinforcement.

The mainstay of contemporary therapies for extensive occlusive arterial disease is venous bypass graft. However, its durability is threatened by intimal hyperplasia (IH) that eventually leads to vessel occlusion and graft failure. Mechanical forces, particularly low shear stress and high wall tension, are thought to initiate and to sustain these cellular and molecular changes, but their exact contribution remains to be unraveled. To selectively evaluate the role of pressure and shear stress on the biology of IH, an ex vivo perfusion system (EVPS) was created to perfuse segments of human saphenous veins under arterial regimen (high shear stress and high pressure). Further technical innovations allowed the simultaneous perfusion of two segments from the same vein, one reinforced with an external mesh. Veins were harvested using a no-touch technique and immediately transferred to the laboratory for assembly in the EVPS. One segment of the freshly isolated vein was not perfused (control, day 0). The two others segments were perfused for up to 7 days, one being completely sheltered with a 4 mm (diameter) external mesh. The pressure, flow velocity, and pulse rate were continuously monitored and adjusted to mimic the hemodynamic conditions prevailing in the femoral artery. Upon completion of the perfusion, veins were dismounted and used for histological and molecular analysis. Under ex vivo conditions, high pressure perfusion (arterial, mean = 100 mm Hg) is sufficient to generate IH and remodeling of human veins. These alterations are reduced in the presence of an external polyester mesh.

A multilevel multiscale finite volume method

The Multiscale Finite Volume (MsFV) method has been developed to efficiently solve reservoir-scale problems while conserving fine-scale details. The method employs two grid levels: a fine grid and a coarse grid. The latter is used to calculate a coarse solution to the original problem, which is interpolated to the fine mesh. The coarse system is constructed from the fine-scale problem using restriction and prolongation operators that are obtained by introducing appropriate localization assumptions. Through a successive reconstruction step, the MsFV method is able to provide an approximate, but fully conservative fine-scale velocity field. For very large problems (e.g. one billion cell model), a two-level algorithm can remain computational expensive. Depending on the upscaling factor, the computational expense comes either from the costs associated with the solution of the coarse problem or from the construction of the local interpolators (basis functions). To ensure numerical efficiency in the former case, the MsFV concept can be reapplied to the coarse problem, leading to a new, coarser level of discretization. One challenge in the use of a multilevel MsFV technique is to find an efficient reconstruction step to obtain a conservative fine-scale velocity field. In this work, we introduce a three-level Multiscale Finite Volume method (MlMsFV) and give a detailed description of the reconstruction step. Complexity analyses of the original MsFV method and the new MlMsFV method are discussed, and their performances in terms of accuracy and efficiency are compared.

Rockfall characterisation and structural protection: A review

Rockfall is an extremely rapid process involving long travel distances. Due to these features, when an event occurs, the ability to take evasive action is practically zero and, thus, the risk of injury or loss of life is high. Damage to buildings and infrastructure is quite likely. In many cases, therefore, suitable protection measures are necessary. This contribution provides an overview of previous and current research on the main topics related to rockfall. It covers the onset of rockfall and runout modelling approaches, as well as hazard zoning and protection measures. It is the aim of this article to provide an in-depth knowledge base for researchers and practitioners involved in projects dealing with the rockfall protection of infrastructures, who may work in the fields of civil or environmental engineering, risk and safety, the earth and natural sciences.

The economic burden of alcohol dependence in europe.

AIMS: To determine the economic burden pertaining to alcohol dependence in Europe. METHODS: Database searching was combined with grey literature searching to identify costs and resource use in Europe relating to alcohol dependence as defined by the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) or the World Health Organisation's International Classification of Diseases (ICD-10). Searches combined MeSH headings for both economic terms and terms pertaining to alcohol dependence. Relevant outcomes included direct healthcare costs and indirect societal costs. Main resource use outcomes included hospitalization and drug costs. RESULTS: Compared with the number of studies of the burden of alcohol use disorders in general, relatively few focussed specifically on alcohol dependence. Twenty-two studies of variable quality were eligible for inclusion. The direct costs of alcohol dependence in Europe were substantial, the treatment costs for a single alcohol-dependent patient lying within the range euro1591-euro7702 per hospitalization and the annual total direct costs accounting for 0.04-0.31% of an individual country's gross domestic product (GDP). These costs were driven primarily by hospitalization; in contrast, the annual drug costs for alcohol dependence were low. The indirect costs were more substantial than the direct costs, accounting for up to 0.64% of GDP per country annually. Alcohol dependence may be more costly in terms of health costs per patient than alcohol abuse. CONCLUSIONS: This review confirms that alcohol dependence represents a significant burden for European healthcare systems and society. Difficulties in comparing across cost-of-illness studies in this disease area, however, prevent specific estimation of the economic burden.

Decomposition of Ruppia cirrhosa (Petagna) Grande in the sediment of a coastal lagoon

The decomposition process of Ruppia cirrhosa was studied in a Mediterranean coastal lagoon in the Delta of the River Ebro (NE Spain). Leaves and shoots of Ruppia were enclosed in 1 mm-mesh and 100 pm-mesh litter bags to ascertain the effect of detritivores, macroinvertebrates, and bacteria and fungi, respectively. Changes in biomass and carbon, and, nitrogen and phosphorus concentrations in the detritus were studied at the sediment-water interface and in the sediment. Significant differences in biomass decay were observed between the two bag types. Significant differences in decomposition were observed between the two experimental conditions studied using 100 pm-mesh bags. These differences were not significant when using the 1 mm-mesh bags. The carbon content in the detritus remained constant during the decomposition process. The percentage of nitrogen increased progressively from an initial 2.4 % to 3 %. The percentage of phosphorus decreased rapidly during the first two days of decomposition from an initial 0.26 % to 0.17 %. This loss is greater in the sediment than in the water column or at the sediment-water interface. From these results we deduce that the activity of microorganisms seems to be more important in the sediment than in the water-sediment interface, and that grazing by macroinvertebrates has less importance in the sediment than in the water column.

Organisation and role of actin microfilaments during cellular growth and morphogenesis in the moss Physcomitrella patens

ABSTRACT The network of actin cytoskeleton is composed of actin filaments (F-actin) that are made by polymerisation of actin monomers and actin binding proteins. It is required for growth and morphogenesis of eukaryotic cells. The labelling of F-actin with constitutively expressed GFP-Talin (Kost et al., 1998) reveals the organisation of cellular actin networks in plants. Due to the lack of information on actin cytoskeleton through gametophytic development of the model moss plant Physcornitrella patens, stable transgenic lines overexpressing GFP-Talin were generated to detect F-actin structures. It is shown that the 35S promoter driven expression is not suitable for F-actin labelling in all cells. When it is replaced by the inducible heat-shock promoter Gmhsp17.3 from soybean, one hour mild heat stress at 37°C followed by recovery at 25°C is enough to induce efficient and transient labelling in all tissues without altering cellular morphology. The optimal observations of F-actin structures at different stages of moss development can be done between 12-18 hours after the induction. By using confocal microscopy, we demonstrate that stellated actin arrays were densely accumulated at the growing tip in regenerating protoplasts, apical protonemal cells and rhizoids and connected with a fine dispersed F-actin mesh. Following three-dimensional growth, the cortical star-like structures are widespread in the meristematic cells of developing bud and young gametophores. On the contrary, undulating networks of actin cables are found at the final stage of cell differentiation. During redifferentiation of mature leaf cells into protonemal filaments the rather stagnant web of actin cables is replaced by diffuse actin meshwork. In eukaryotes, nucleation of the actin monomers prior to their polymerization is driven by the seven-subunit ARP2/3 complex and formins. We cloned the gene encoding the ARP3 subunit of P. patens and generated arp3 mutants of the moss through gene disruption. The knockout of ARP3 affects the elongation of chloronemal cells and blocks further differentiation of caulonemal cells and rhizoids, and the gametophores are slightly stunted compared to wild-type. The arp mutants were created in the heat-shock inducible GFP-Talin strains allowing us to visualise a disorganised actin network and a lack of star-like actin cytoskeleton arrays. We conclude that ARP2/3 dependent nucleation of actin filaments is critical for the growth of filamentous cells, which in turn influences moss colonization. In complementation assays, the overexpression of Physcomitrella and Arab idopsis ARP3 genes in the moss arp3 mutant results in full recovery of wild type phenotype. In contrast the ARP3 subunit of fission yeast is not able to complement the moss arp3 mutant of moss indicating that regulation of the ARP2/3 dependent actin nucleation diverged in different kingdoms. RESUME Le réseau d'actine est composé de filaments de F-actine et d'un ensemble de protéines s'y attachant (Actin binding proteins). Le réseau d'actine est nécessaire à la croissance et à la morphogenèse de toutes les cellules eucaryotes. Chez les plantes, le marquage ainsi que l'étude de l'organisation du réseau d'actine ont été réalisés en utilisant une fusion GFP-Talin (Kost et al., 1998) exprimée sous le control d'un promoteur constitutif. Afin d'étudier les structures F-actine dans les cellules de Physcomitrella Patens et pour combler le manque d'information sur le développement des gamétophores, des lignées transgéniques stables surexprimant GFP-Talin ont été crées. Nous avons démontré que l'utilisation du promoteur 35S est inadéquate pour le marquage complet et homogène des filaments d'actine dans toutes les cellules de P. patens. Par contre, l'utilisation du promoteur inductible Gmhsp17.3 nous a permis de réaliser un marquage transitoire et général dans tous les tissus de la mousse. Une heure de choc thermique à 37°C suivis d'un temps de récupération de 12-18h à 25°C sont les conditions optimales (sans dommages cellulaires) pour l'observation des structures F-actine à différentes étapes de développement de la mousse. En utilisant la microscopie confocale, nous avons observé l'existence de structures F-actine accumulées en forme d'étoiles. Ces structures, qui sont liées au réseau de microfilaments d'actine, ont été observées dans les protoplastes en régénération, les cellules des protonema apicales ainsi que dans les rhizoïdes. En suivant la croissance tridimensionnelle, ces structures en étoiles ont été observées dans les cellules meristématiques des bourgeons et des jeunes gamétophores. Par contre, dans les cellules différentiées ces structures laissent place à des réseaux de câbles épais. Nous avons également remarqué que durant la redifferentiation des cellules foliaires le réseau de câbles de F-actine est remplacé par un réseau de F-actine diffus. Dans les cellules eucaryotes, la nucléation des filaments d'actirie précédant leur polymérisation est contrôlé par sept sous unités du complexe ARP2/3 et par des formines. Nous avons isolé le gène codant pour la sous unité ARP3 de P. patens et nous avons crée des mutants arp3 par intégration ciblée (Knockout). L'élongation des cellules chloronema est clairement affectée dans les mutants arp3. La différentiation des caulonemata et des rhizoïdes est bloquée et les gametophores sont légèrement plus courts comparé au type sauvage. A fin d'étudier l'organisation des filaments d'actines dans les mutants arp3, nous avons aussi réalisé un arp3-knockout dans la lignée Hsp-GFP-Talin. La nouvelle lignée générée nous a permis de visualiser une désorganisation du réseau d'actine et une absence complète de structures de F-actine accumulée en forme d'étoiles. Les résultats obtenus nous amènent à conclure que la nucléation (ARP2/3 dépendante) des filaments d'actine est indispensable à la croissance des cellules filamenteuses. Par conséquent, les filaments d'actine semblent avoir un rôle dans la colonisation des milieux par les mousses. Nous avons également procédé à des essais de complémentation du mutant arp3. La surexpression des gènes ARP3 de Physcomitrella et d'Arabidopsis dans les cellules du mutant arp3 rétabli complètement le phénotype WT. Par contre, le gène ARP3 des levures n'est pas suffisant pour complémenter la même mutation dans les cellules de mousses. Ce résultat démontre que les mécanismes de régulation de la nucléation des filaments d'actine (ARP2/3 dépendante) sont différents entre les différents groupes d'eucaryotes.

A comparison of rapid bioassessment protocols used in 2 regions with Mediterranean climates, the Iberian Peninsula and South Africa

Abstract. The ability of 2 Rapid Bioassessment Protocols (RBPs) to assess stream water quality was compared in 2 Mediterranean-climate regions. The most commonly used RBPs in South Africa (SAprotocol) and the Iberian Peninsula (IB-protocol) are both multihabitat, field-based methods that use macroinvertebrates. Both methods use preassigned sensitivity weightings to calculate metrics and biotic indices. The SA- and IB-protocols differ with respect to sampling equipment (mesh size: 1000 lm vs 250 300 lm, respectively), segregation of habitats (substrate vs flow-type), and sampling and sorting procedures (variable time and intensity). Sampling was undertaken at 6 sites in South Africa and 5 sites in the Iberian Peninsula. Forty-four and 51 macroinvertebrate families were recorded in South Africa and the Iberian Peninsula, respectively; 77.3% of South African families and 74.5% of Iberian Peninsula families were found using both protocols. Estimates of community similarity compared between the 2 protocols were .60% similar among sites in South Africa and .54% similar among sites in the Iberian Peninsula (BrayCurtis similarity), and no significant differences were found between protocols (Multiresponse Permutation Procedure). Ordination based on Non-metric Multidimensional Scaling grouped macroinvertebrate samples on the basis of site rather than protocol. Biotic indices generated with the 2 protocols at each site did not differ. Thus, both RBPs produced equivalent results, and both were able to distinguish between biotic communities (mountain streams vs foothills) and detect water-quality impairment, regardless of differences in sampling equipment, segregation of habitats, and sampling and sorting procedures. Our results indicate that sampling a single habitat may be sufficient for assessing water quality, but a multihabitat approach to sampling is recommended where intrinsic variability of macroinvertebrate assemblages is high (e.g., in undisturbed sites in regions with Mediterranean climates). The RBP of choice should depend on whether the objective is routine biomonitoring of water quality or autecological or faunistic studies.

Deriva nictemeral de macroinvertebrados en el rio Llobregat (Barcelona)

A study on the qualitative and quantitative coniposition of macroinvertebrate drift in the Llobregat river ( N E Spain) is put fonvard. Samples were taken hourly during a 24 hour period in august 1982. The samples were taken with a net of 625 cm. of filtering surface and an opening mesh size of 500 microns, which íiltered 72,1 m3 /h. and collected 75.719 individuals during the sampling period. That means a drift rate of 1.224 indiv./h. and a drift density of 17 indi/m3 . 8 I0/o of the organismes collected were exuviae, mainly pupal chironomid skins (54%) and nimphal ephemeroptera moults (27(Ynj. The remainder percentage of living organisms represents a drift rate of 227 indiv./h. and a drift density of 3.14 indiv./m3. These are intermediate values ifwe compare them with the data published. Sixty per cent of the living drift were chiroiiomids. 17.5 '1 ephemeroptera and 10 (%1 trichoptera; these being the niost iniportant groups. Ofthe 87 species identified in those groups 23 were common in al1 the (7 1 ) samples (Table 1)

Constructive micritic envelope developed in the vadose continental environment in the Pleistocene eoliantes of Mallorca (Spain)

In this study we analyze and explain the formation of the constructive micrite envelope in the vadose continental environment. This constructive micrite envelope shows a wide variety of textural components. The principal textural components are: microorganisms, micritic and microspar LMC cement, whisker crystals, microfibres and aggregates of LMC acicular crystals. The main microorganisms are hyphae fungi, although actynomicetes and bacteries also occur. The constructive micrite envelope is due to the action of calcified filaments (hyphae fungi) which collapse and coalesce forming an intertwined mesh as well as due to the precipitation of micritic and microspar cement. The whisker crystals, microfibres and aggregates of LMC acicular crystals are secondary microtextures. Constructive micrite envelopes does not indicate a specific diagenetic environment. The constructive micrite envelopes present irregularities or bumps at the outer surface of the grains, and the destructive micrite envelopes present irregularities towards the grain interior. This morphologic criterion is useful to differenciate the micrite envelope origin, constructive or destructive, in the fossil record.

Performance of Various Thicknesses of P.C. Concrete Secondary Pavement, HR-9, 1979

In 1951 Greene County and the Iowa Highway Research Board paved County Road E-33 from Iowa Highway No. 17 (now Iowa 4) to Farlin with various thicknesses [ranging from 4.5 in. (11.4 cm) to 6 in. (15.2 cm)] of portland cement concrete pavement. The project, designated HR-9, was divided into ten research sections. This formed pavement was placed on the existing grade. Eight of the sections were non-reinforced except for centerline tie bars and no contraction joints were used. Mesh reinforcing and contraction joints spaced at 29 ft 7 in. (9.02 m) intervals were used in two 4.5-in. (11.4-cm) thick sections. The concrete in one of the sections was air entrained. Signs denoting the design and limits of the research sections were placed along the roadway. The pavement has performed well over its 28-year life, carrying a light volume of traffic safely while requiring no major maintenance. The 4.5-in. (11.4-cm) thick mesh-reinforced pavement with contraction joints has exhibited the best overall performance.

Glasgrid Fabric to Control Reflective Cracking, HR-535, 1990

The major problem with durability of asphalt cement concrete (ACC) overlays to rehabilitate jointed portland cement concrete (PCC) pavement comes from reflective cracking. The objective of this research was to evaluate the effectiveness of Glasgrid in regard to preventing reflection cracking. Glasgrid is a glass fiber mesh with 1/2 inch by 1 inch openings (Figure 1). Each strand is composed of many small glass fibers. After the grid is formed, it is coated with a polymer modified asphalt cement. In 1986, four experimental Glasgrid test sections were incorporated into Polk County project IR-35-2(191)67--12-77 on Interstate 35 from IA 5 to the west 1-80 interchange on the west edge of Des Moines, Single and double layers of Glasgrid were placed over transverse cracks and joints of the existing PCC pavement. The Glasgrid was placed on the PCC pavement for one section and between lifts of the ACC resurfacing on the other three sections. The four Glasgrid sections were compared to two sections without Glasgrid for four years. The sections were reviewed annually to determine how many cracks or joints had reflected through the resurfacing. Glasgrid placed on the PCC pavement was more effective at preventing reflection cracking than Glasgrid between lifts of AC resurfacing. In general, Glasgrid yielded a small reduction or retardation in the amount of reflection cracking, but not sufficient to justify additional expense for the use of Glasgrid.

La tutoria entre iguals com a eina per millorar l'aprenentatge universitari

L'article presenta el programa de tutoria entre iguals que es va posar en marxa el curs 2009-2010 en el marc del Pla d¿acció tutorial de la Facultat d'Economia i Empresa, i una part dels resultats del procés d'avaluació dut a terme. La incorporació de la figura de l'alumne tutor en la política tutorial del centre tenia com un dels seus objectius principals incrementar la motivació i l'aprenentatge d¿alumnes de cursos superiors mitjançant la seva implicació en activitats extracurriculars vinculades a la titulació. L'estudi va voler copsar quin impacte té participar com a company tutor en el procés de formació, mitjançant la tècnica de la discussió de grup i una enquesta per qüestionari. Els resultats apunten que la tutoria entre iguals repercuteix en l¿aprenentatge, de manera que beneficia els alumnes tutors en l'adquisició de competències comunicatives i en l¿accés a recursos de la universitat fins aleshores desconeguts.

A Study on the Use of Fabric to Retard Reflective Cracking Over Widened Joints, MLR-88-4, 1992

Reflective cracking of asphalt resurfacing has been a concern for a long time. Years ago wire mesh was used to control widening cracks. More recently it has been fabrics or fiberglass. In 1986, part of the proposed fabric was deleted from projects in different parts of Iowa with various histories and designs. These projects were monitored in 1988, 1989, 1990 and 1992 with only the thin (3 inch) overlays on newly widened pavements showing a significantly greater percentage of cracks in the areas where the fabric was deleted.

Una Propuesta de renovación metodológica en el marco del Espacio Europeo de Enseñanza Superior: los pequeños grupos de investigación cooperativos

La
 Declaración 
de 
Bolonia 
sentó
 las 
bases 
para
 la 
construcción
 de
 un
 Espacio
 Europeo
 de
 Enseñanza
 Superior
 (EEES)
 entre
 cuyos
 retos
 destaca
 la 
renovación 
metodológica. 
Este
 trabajo 
plantea 
la
 organización
 de
 una
 materia
 básica
 de
 psicología
 como
 es
 Procesos
 Psicológicos
 Básicos
 para
 estudiantes
 de
 Pedagogía
 y
 Psicopedagogía
 mediante
 la
 organización
 de
 pequeños
 grupos
 cooperativos
 de
 investigación.
 Con
 esta
 propuesta
 se
 trabajan
 diferentes 
ejes 
de 
gran
 importancia
 para 
la 
construcción
 del 
EEES
 como 
son 
la
 promoción 
de
 la 
función 
tutorial,
la 
formación 
basada
 en
 competencias,
 el
 aprendizaje
 autónomo,
 la
 consideración
 del
 tiempo 
y 
la 
carga
 de
 trabajo 
y 
la 
promoción 
del 
uso 
de
 las 
nuevas
 tecnologías. El 
artículo,
se 
centra 
fundamentalmente 
en 
describir 
y
 explicar
 el
 trabajo
 cooperativo
 en
 grupos
 de
 investigación,
 su
 organización,
 orientación,
 desarrollo,
 seguimiento
 y
 evaluación.
 Los
 resultados
 de 
la 
aplicación 
de 
esta
 propuesta
 resultaron 
muy
 formativos
 para
 los
 alumnos
 tanto
 a
 nivel
 puramente
 académico
 como
 de 
relaciones 
interpersonales

Algies après cure de hernie inguinale: que faire [Pain after inguinal hernia repair: what to do?]

Hernia repair one of the most frequently performed operations in general surgery. With the introduction of tension-free mesh repair, recurrence rates dropped well below 5% for open and laparoscopic procedures. However, chronic postoperative pain remains a widely neglected complication with a high socio-economic impact. It occurs in about 10-20% of patients after hernia repair. We review the different types of post-herniorrhaphy pain with the typical diagnostic features and we conclude with a pragmatic algorithm based on our clinical experience.