High-throughput phenotyping (HTP) identifies seedling root traits linked to variation in seed yield and nutrient capture in field-grown oilseed rape (Brassica napusL.)

Background and Aims Root traits can be selected for crop improvement. Techniques such as soil excavations can be used to screen root traits in the field, but are limited to genotypes that are well-adapted to field conditions. The aim of this study was to compare a low-cost, high-throughput root phenotyping (HTP) technique in a controlled environment with field performance, using oilseed rape (OSR; Brassica napus) varieties. Methods Primary root length (PRL), lateral root length and lateral root density (LRD) were measured on 14-d-old seedlings of elite OSR varieties (n = 32) using a ‘pouch and wick’ HTP system (∼40 replicates). Six field experiments were conducted using the same varieties at two UK sites each year for 3 years. Plants were excavated at the 6- to 8-leaf stage for general vigour assessments of roots and shoots in all six experiments, and final seed yield was determined. Leaves were sampled for mineral composition from one of the field experiments. Key Results Seedling PRL in the HTP system correlated with seed yield in four out of six (r = 0·50, 0·50, 0·33, 0·49; P < 0·05) and with emergence in three out of five (r = 0·59, 0·22, 0·49; P < 0·05) field experiments. Seedling LRD correlated positively with leaf concentrations of some minerals, e.g. calcium (r = 0·46; P < 0·01) and zinc (r = 0·58; P < 0·001), but did not correlate with emergence, general early vigour or yield in the field. Conclusions Associations between PRL and field performance are generally related to early vigour. These root traits might therefore be of limited additional selection value, given that vigour can be measured easily on shoots/canopies. In contrast, LRD cannot be assessed easily in the field and, if LRD can improve nutrient uptake, then it may be possible to use HTP systems to screen this trait in both elite and more genetically diverse, non-field-adapted OSR.

The Stephen Dwoskin dossier: introduction

This dossier aims to consider the contribution Stephen Dwoskin and his work made to the development of film and its infrastructure in the UK from 1964 when he arrived in the London until his death in 2012. Dwoskin not only straddled different contexts and ideologies about film but advocated for the support of work in a wide variety of forms. Because of this he was not easily categorizeable. Much of the work analyzing his camera work and his contribution to film is written in French and there is little, particularly in recent years, in English. As such this dossier constituted an important contribution to the reassessment of a singular avant-garde artist and film maker. (can I use avant garde here?) In the light of his recent death this is a timely moment for a consideration of Dwoskin’s achievements and legacy. As well as having a groundbreaking vision of what film could do, he was an influential figure and constituting force in terms of the milieu and structures that supported the independent film world in the UK for several decades. Much of the literature surrounding this world in the UK has been formed by key figures making sense of their part in history. This dossier aims towards some first steps in historicising his legacy. Two of the proposed texts will be making use of new material to conduct original research made available through the recently acquired Dwoskin Archive at University of Reading. Due to Dowksin’s heterogenous involvement in film, there are many ways in which Dwoskin can be considered and the proposed essays will take a range of perspectives to assess and analyse his contribution.

Acellular Dermal Matrix Graft for Gingival Augmentation: A Preliminary Clinical, Histologic, and Ultrastructural Evaluation

Background: The aim of this study was to evaluate clinically, histologically, and ultrastructurally the integration process of the acellular dermal matrix used to increase the band of keratinized tissue while achieving gingival inflammation control. Methods: Ten patients exhibiting a mucogingival problem with bands of keratinized tissue <= 1 mm and gingival inflammation of the related teeth were included in the study. The surgical procedures were performed to augment the gingival tissue using acellular dermal matrix. Clinical measurements were assessed at baseline and after 3 months. A specimen of the allograft and surrounding tissues was obtained immediately before the surgery and 4 minutes and 1, 2, 3, 4, 6, and 10 weeks after grafting. Results: Clinically, a gain of keratinized tissue of 2.92 +/- 0.65 mm was observed after 3 months. Histologically and ultrastructurally, many macrophages were observed phagocytosing preexisting collagen fibers in the first weeks. From week 2 on, fibroblasts synthesizing new collagen, epithelial cells colonizing the graft surface, and revascularization were noticed. After 6 weeks it was difficult to find the acellular dermal matrix preexisting collagen fibers. This process of substitution was completed after 10 weeks, when the reepithelialization of the entire graft throughout a well-structured basement membrane was achieved. Conclusion: The acellular dermal matrix graft seemed to be an easily handled material for use in keratinized tissue augmentation that, in humans, was substituted and completely reepithelialized in 10 weeks according to histologic and ultrastructural results. J Periodontol 2009;80:253-259.

Virtual Pole from Magnetic Anomaly (VPMA): A procedure to estimate the age of a rock from its magnetic anomaly only

Virtual Pole from Magnetic Anomaly (VPMA) is a new multi-disciplinary methodology that estimates the age of a source rock from its magnetic anomaly, taken directly from available aeromagnetic data. The idea is to use those anomalies in which a strong remanent magnetic component is likely to occur. Once the total magnetization of the anomaly is computed through any of the currently available methods, the line that connects all virtual paleogeographic poles is related with the position, on a paleogeographic projection, of the appropriate age fragment of the APWT curve. We applied this procedure to five (5) well-known magnetic anomalies of the South American plate in SE Brazil, all of them associated to alkaline complexes of Mesozoic age. The apparent ages obtained from VPMA on three of the anomalies where the radiometric age of the source rock is known - Tapira, Araxa and Juquia were inside the error interval of the published ages. The VPMA apparent ages of the other two, where the age of the source rock is not known (Registro and Pariqueracu magnetic anomalies) were geologically coherent. We expect that the application of the VPMA methodology as a reconnaissance geochronological tool may contribute to geological knowledge over continental areas, especially when the source rocks of the magnetic anomalies am unknown or buried below superficial sediments. (C) 2009 Elsevier B.V. All rights reserved.

A pattern recognition approach to complex networks

Complex networks exist in many areas of science such as biology, neuroscience, engineering, and sociology. The growing development of this area has led to the introduction of several topological and dynamical measurements, which describe and quantify the structure of networks. Such characterization is essential not only for the modeling of real systems but also for the study of dynamic processes that may take place in them. However, it is not easy to use several measurements for the analysis of complex networks, due to the correlation between them and the difficulty of their visualization. To overcome these limitations, we propose an effective and comprehensive approach for the analysis of complex networks, which allows the visualization of several measurements in a few projections that contain the largest data variance and the classification of networks into three levels of detail, vertices, communities, and the global topology. We also demonstrate the efficiency and the universality of the proposed methods in a series of real-world networks in the three levels.

Proposal of a Brazilian accreditation program for personal dosimetry using OSL

After the development of the highly sensitive material Al(2)O(3):C, personal dosimetry using optically stimulated luminescence (OSL) has been continuously adopted in place of thermoluminescence dosimeters (TLD) by different countries (e.g. USA and Japan). In order to use a dosimetric system in Brazil it is necessary to develop a protocol and to fulfill performance and type tests in accordance with the accreditation program approved by the responsible governmental committee. This paper presents a proposal for an accreditation program for OSL personal dosimetry using a commercial dosimetric system, including tests that follow the same rules as applied to TLD and film dosimetry. The experimental results are within the reliability interval and in accordance to the expected behavior. A new test concerning re-analysis of exposed badges is also proposed. (C) 2009 Elsevier Ltd. All rights reserved.

Front End Evaluation of 'Tester' Exhibition to be Developed into a Travelling Sports Exhibition

The purpose of this evaluation is to develop a framework that will help in planning and implementing the mobile sport exhibition, increase visitor satisfaction and aid At Bristol in building successful exhibits. The evaluation mainly focuses on visitor interaction with exhibits. It is believed that learning does occur in science centres and museums. The evaluation will therefore find out if learning occurs in the Sports exhibition and if so, the nature of the learning outcomes. The evaluation also discusses advantages and disadvantages of travelling exhibitions and identifies the characteristics of good exhibits that form the basis of the framework.From the results, an indication is that children make the larger proportion of visitors to Sportastic. Their age ranges, under 10 and 10 to 15 years constituted 21% and 30% respectively. The three most enjoyed exhibits are the Sprint Challenge (running), BATAK (test your reaction and Hot Shots (football). Visitors say these exhibits are enjoyed because they are fun, competitive, entertaining, interactive and hands-on. Skateboard Challenge and Skeleton Bob are among the exhibits least enjoyed since they are reported to be boring and uncomfortable to use. The learning outcomes from the exhibits are; increased knowledge about balancing, reaction, pulse and strength.

Citizens and Contemporary Science Ways to dialogue in science centre contexts.

The current paper presents a study conducted at At-Bristol Science Centre, UK. It is a front-end evaluation for the “Live Science Zone” at At-Bristol, which will be built during the autumn of 2004. It will provide a facility for programmed events and shows, non-programmed investigative activities and the choice of passive or active exploration of current scientific topics. The main aim of the study is to determine characteristics of what kind of techniques to use in the Live Science Zone. The objectives are to explore what has already been done at At-Bristol, and what has been done at other science centres, and to identify successful devices. The secondary aim is mapping what sorts of topics that visitors are actually interested in debating. The methods used in the study are deep qualitative interviews with professionals working within the field of science communication in Europe and North America, and questionnaires answered by visitors to At-Bristol. The results show that there are some gaps between the intentions of the professionals and the opinions of the visitors, in terms of opportunities and willingness for dialogue in science centre activities. The most popular issue was Future and the most popular device was Film.

Förpackningsproduktion samt studie om hur reumatikervänliga förpackningar är idag

AssiDomän Frövi board mill has in cooperation with students from Graphic Technologyat the University of Dalarna a degree project that involves developing package solutionsin carton material from AssiDomän Frövi. This year the basic condition was to use theweights 270g/m2, 300g/m2 and 330g/m2 and choose between Frövi Bright, Frövi Lightand Frövi Carry.The packages were supposed to be in the segments industrial products,chocolate/sweets and beauty products/cosmetics. Two packages were produced in thesegments industrial products and beauty products/cosmetics.The first package, produced in the industrial segment, contains textile color and templatesand the second package is a gift package and contains nail polish.The investigation part of the project deals with how the packages today are fit forrheumatics in opening purpose.

MACHINE VISION FOR AUTOMATICVISUAL INSPECTION OF WOODENRAILWAY SLEEPERS USING UNSUPERVISED NEURAL NETWORKS

The motivation for this thesis work is the need for improving reliability of equipment and quality of service to railway passengers as well as a requirement for cost-effective and efficient condition maintenance management for rail transportation. This thesis work develops a fusion of various machine vision analysis methods to achieve high performance in automation of wooden rail track inspection.The condition monitoring in rail transport is done manually by a human operator where people rely on inference systems and assumptions to develop conclusions. The use of conditional monitoring allows maintenance to be scheduled, or other actions to be taken to avoid the consequences of failure, before the failure occurs. Manual or automated condition monitoring of materials in fields of public transportation like railway, aerial navigation, traffic safety, etc, where safety is of prior importance needs non-destructive testing (NDT).In general, wooden railway sleeper inspection is done manually by a human operator, by moving along the rail sleeper and gathering information by visual and sound analysis for examining the presence of cracks. Human inspectors working on lines visually inspect wooden rails to judge the quality of rail sleeper. In this project work the machine vision system is developed based on the manual visual analysis system, which uses digital cameras and image processing software to perform similar manual inspections. As the manual inspection requires much effort and is expected to be error prone sometimes and also appears difficult to discriminate even for a human operator by the frequent changes in inspected material. The machine vision system developed classifies the condition of material by examining individual pixels of images, processing them and attempting to develop conclusions with the assistance of knowledge bases and features.A pattern recognition approach is developed based on the methodological knowledge from manual procedure. The pattern recognition approach for this thesis work was developed and achieved by a non destructive testing method to identify the flaws in manually done condition monitoring of sleepers.In this method, a test vehicle is designed to capture sleeper images similar to visual inspection by human operator and the raw data for pattern recognition approach is provided from the captured images of the wooden sleepers. The data from the NDT method were further processed and appropriate features were extracted.The collection of data by the NDT method is to achieve high accuracy in reliable classification results. A key idea is to use the non supervised classifier based on the features extracted from the method to discriminate the condition of wooden sleepers in to either good or bad. Self organising map is used as classifier for the wooden sleeper classification.In order to achieve greater integration, the data collected by the machine vision system was made to interface with one another by a strategy called fusion. Data fusion was looked in at two different levels namely sensor-level fusion, feature- level fusion. As the goal was to reduce the accuracy of the human error on the rail sleeper classification as good or bad the results obtained by the feature-level fusion compared to that of the results of actual classification were satisfactory.

Visuell Perception : En studie av visuella faktorer kring ett musikaliskt framträdande

The essay investigates the visual element as seen by the audience and artist to be of greatest importance to a musicalperformance. The study was conducted in the form of a field work which included doing interviews with artists, surveys of the audience and interpretive observations of live performance. The fieldwork was conducted in three different environments in which I found myself on the spot and performed the various stages included in the field work. It was done to create a surface that could be used in an essay, and through that use this material to compare and analyze my results and in the end be able to answer my questions. I started from eight different factors which all could beexperienced visually on stage. The factors were light / colors, costumes, props, effects, stage presence, attitude / image, nervousness and dance / body language. Those factors would then be examined in the various musical performances and to be answered by the audience and performers which of those factors they considered to be of great importance or small importance when it comes to visual perception in a musical context. The result was a clear statement where two factors were considered to be most crucial for a musical performance, and a clear statement in which two factors were considered by the majority to be less important. The results demonstrate a common understanding what the artist and the audience thinks is important. A result that can act as a template for what an artist should think about regarding the visual elements before an performance. My theory is my assumption that the visual elements of musical performances can play an important or decisive role, an assumption that was strengthened by my empirical experiences at a concert visit. I wanted in this essay explore and give a clear picture of what it is that artists and audiences consider to be visually crucial for a musical context

Expert system to calculate the cofficient of friction : an approach to enhance traffic safety

Friction plays a key role in causing slipperiness as a low coefficient of friction on the road may result in slippery and hazardous conditions. Analyzing the strong relation between friction and accident risk on winter roads is a difficult task. Many weather forecasting organizations use a variety of standard and bespoke methods to predict the coefficient of friction on roads. This article proposes an approach to predict the extent of slipperiness by building and testing an expert system. It estimates the coefficient of friction on winter roads in the province of Dalarna, Sweden using the prevailing weather conditions as a basis. Weather data from the road weather information system, Sweden (RWIS) was used. The focus of the project was to use the expert system as a part of a major project in VITSA, within the domain of intelligent transport systems

Load Adapted Solar Thermal Combisystems - Optical Analysis and Systems Optimization

In a northern European climate a typical solar combisystem for a single family house normally saves between 10 and 30 % of the auxiliary energy needed for space heating and domestic water heating. It is considered uneconomical to dimension systems for higher energy savings. Overheating problems may also occur. One way of avoiding these problems is to use a collector that is designed so that it has a low optical efficiency in summer, when the solar elevation is high and the load is small, and a high optical efficiency in early spring and late fall when the solar elevation is low and the load is large.The study investigates the possibilities to design the system and, in particular, the collector optics, in order to match the system performance with the yearly variations of the heating load and the solar irradiation. It seems possible to design practically viable load adapted collectors, and to use them for whole roofs ( 40 m2) without causing more overheating stress on the system than with a standard 10 m2 system. The load adapted collectors collect roughly as much energy per unit area as flat plate collectors, but they may be produced at a lower cost due to lower material costs. There is an additional potential for a cost reduction since it is possible to design the load adapted collector for low stagnation temperatures making it possible to use less expensive materials. One and the same collector design is suitable for a wide range of system sizes and roof inclinations. The report contains descriptions of optimized collector designs, properties of realistic collectors, and results of calculations of system output, stagnation performance and cost performance. Appropriate computer tools for optical analysis, optimization of collectors in systems and a very fast simulation model have been developed.

Induktiv provning av ferritiskt rostfritt stå

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated. Theories about the material's physical properties have also been included, mainly the magnetic properties, electrical conductivity and the material's tendency to oxidize.Results from the tests show that a number of factors do not affect the inductive test significantly and to use a filter to reduce the noise level does not seem to be a viable option. The level of noise does not relate to the presence of superficial particles in form of oxides.The ferritic stainless steels showed some difference in noise level. Which noise level there was did match well with the steels probability for a precipitation of a second phase, and precipitation of austenite may in this case contribute to noise when using an eddy current instrument.The noise is probably due to some physical material property that varies within the thread.

Elevers möjlighet till reflektion i matematikundervisningen : En studie i grunskolans årskurs 9

Studiens huvudsakliga syfte är att få kunskap kring om och hur elever i skolår 9 stimuleras till reflektion i matematikundervisningen. Den tidigare forskning som presenteras i litteraturgenomgången visar på reflektionens betydelse i lärprocessen och ger riktlinjer för vilka aktiviteter som uppmanar till respektive hämmar elevers reflektion. Genom en kvalitativ fallstudie, med i huvudsak lektionsobservationer som utgångspunkt och med efterföljande lärarintervjuer som stöd, har syftet uppnåtts genom att kartlägga den aktivitet som förekommer i praktiken. Undervisningsaktiviteter som kan uppvisa en positiv respektive negativ effekt på elevers möjlighet till reflektion har vid bearbetning och analys av materialet kunnat urskiljas. Resultatet visar att trots att lärare är positivt inställda till metakognition och ett reflekterande arbetssätt förekommer endast i vissa fall tillfällen då eleven stimuleras till reflektion och denna får ske. Vanligt förekommande i lärares undervisning är situationer som skulle kunna fungera som reflektionsstimulerande om de ges utrymme och reflektionen följs upp. Studiens resultat kan bidra till att påminna och göra lärare medvetna om vilka aktiviteter som stödjer reflektion samt förmedla vikten av att eleverna redan i grundskolans tidigare år undervisas om och utsättas för en undervisningspraktik som kontinuerligt kräver förekomsten av reflektion.