An in vitro analysis of the total phenolic content, antioxidant power, physical, physicochemical, and chemical composition of Terminalia Catappa Linn fruits

This study assessed the antioxidant, total phenolic, and physicochemical properties of in vitro Terminalia Catappa Linn (locally called castanhola) using the DPPH assay. The castanhola fruits had an average weight of 19.60 ± 0.00 g, combining shell, pulp, and seed weight, and a soluble solids content of 8 °Brix. The chemical composition was determined with predominance of carbohydrates (76,88 ± 0,58%).The titration method was used to determine Vitamin C content using 2,6-dichlorophenolindophenol (DCFI), known as reactive Tillmans resulting in no significant levels. Aqueous extracts of castanhola pulp showed a higher concentration of phenolics, 244.33 ± 18.86 GAE.g-1 of fruit, and alcoholic extracts, 142.84 ± 2.09 GAE.g-1 of fruit. EC50 values of the aqueous extract showed a greater ability to scavenge free radicals than the alcoholic extracts. The fruit had a significant content of phenolic compounds and high antioxidant capacity.

Antioxidants in yacon products and effect of long term storage

Yacon (Smallanthus sonchifolius (Poepp. and Endl.) H. Robinson) is a storage root originally grown in the Andean highlands. The fresh roots are perishable and quickly turn brown during handling and processing. Aiming to prolong shelf-life and to preserve the antioxidant compounds in yacon roots, 3 mm thick yacon slices were dried in a drying cabinet at 40, 50, and 60 ºC to a moisture content of 10-14%, and yacon strips were sun dried to a moisture content of 15-20%. The total phenolic content was measured by the Folin-Ciocalteu method, and the quenching capacity was evaluated by measuring the amount of DPPH (1,1-diphenyl-2-pidrylhydrazyl) inhibited in samples after drying and after 7 months of storage. The results showed that it is possible to preserve the antioxidant capacity in yacon after cabinet or sun drying. Both yacon chips and strips presented total phenolic content values similar to those of fresh yacon roots. Both products also showed a high inhibition capacity of DPPH (1,1-diphenyl-2-pidrylhydrazyl). A significant decrease in the phenolic content was observed in the yacon chips after storage, which indicates that the sun dried strips are more suitable for storage.

Processing, physicochemical, and sensory analyses of ostrich meat hamburger

The objective of this study was to assess the potential utilization of ostrich meat trimming in hamburger preparation, as well as its physicochemical and sensory characterization. Using ostrich meat trimmings from the legs and neck, four different formulations were prepared with varied amounts of bacon and textured soybean protein. Physical analysis of yield, shrinkage percentage, and water retention capacity and chemical analysis of proximate composition, cholesterol levels, and calories were performed. The formulations underwent sensory analysis by 52 potential ostrich meat consumers, who evaluated tenderness, juiciness, flavor, and purchase intent. The formulations containing textured soybean protein showed the highest yield, lowest shrinkage percentage, and highest water retention capacity. Lipid content varied from 0.58 to 4.99%; protein from 17.08 to 21.37%; ash from 3.00 to 3.62%; moisture from 73.87 to 76.27%; cholesterol from 22.54 to 32.11 mg.100 g-1; and calorie from 87.22 to 163.42 kcal.100 g-1. All formulations showed low cholesterol and calorie levels, even that containing 10% bacon and 3.5% textured soybean protein, which achieved the best scores and acceptance by the panelists.

Physical, chemical, technological and sensory characteristics of Frankfurter type sausage containing okara flour

The addition of okara flour to an emulsified meat product (Frankfurter type sausage) was evaluated based on the physical, chemical, technological, and sensory characteristics of the final product. Okara, residue from soymilk production, was provided by two soymilk producing companies whose production systems were based on the hot disintegration of the decorticated (company B) or undecorticated (company A) soybeans. The okara was dehydrated using a flash dryer and then ground into flour (>420 µm). However, The okara flours A and B showed approximately the same amount of protein (35 and 40 g.100 g-1 dwb). However, the okara flour A presented higher values (p < 0.05) for all technological functional properties studied (emulsification capacity, emulsion stability, protein solubility, and water hold capacity) than those of okara flour B. The A and B okara flours were used in a frankfurter sausage formulation as substitution of 1.5% and 4% of meat. The results showed that the sausages containing okara flours A and B, as well as the control sausage, were accepted by the sensory panel. Moreover, there were no significant differences (p < 0.05) in the physical (color, objective texture, and emulsion stability) and chemical (pH and proximate composition) measurements of the sausages with and without the okara flour.

Chemical and physical properties of aloe vera (Aloe barbadensis Miller) gel stored after high hydrostatic pressure processing

The aim of this study was to evaluate the influence of high hydrostatic pressure (150, 250, 350, 450, and 550 MPa), applied for 5 minutes, on antioxidant capacity, total phenolic content, color, firmness, rehydration ratio, and water holding capacity of aloe vera gel stored for 60 days at 4 °C. The analyzed properties of the pressurized gel showed significant changes after the storage period. The highest value of total phenolic content was found at 550 MPa. However, a decrease in the antioxidant capacity was observed for all pressurized gel samples when compared to the control sample (p < 0.05). The smallest changes in product color were observed at pressure levels between 150 and 250 MP. The application of high hydrostatic pressure resulted in lower gel firmness, and the lowest value was found at 150 MPa (p < 0.05). On the other hand, the untreated sample showed a greater decrease in firmness, indicating that high pressure processing preserves this property. The application of high hydrostatic pressure exhibited modifications in the food matrix, which were evaluated in terms of rehydration ratio and water holding capacity.

Physicochemical and microbiological parameters of dried salted pork meat with different sodium chloride levels

The objective of this study was to evaluate the physicochemical and microbiological parameters of pork meat submitted to dry salting. Sodium chloride (NaCl) was added at levels of 0%, 2.5%, 5%, 7.5% or 10% by the meat weight. Dry salting technique was used, which consists of rubbing the sodium chloride manually, followed by a rest period. The data were submitted to analysis of variance using a completely randomized experimental design. The means were compared by Duncan test at 5%. The salting process reduced (P < 0.05) humidity and water activity, and it increased (P < 0.05) ash, chloride, palmitic acid, and water holding capacity levels compared to those of the control. Luminosity (L*) was lower (P < 0.05) in the control, and a* color was more intense in samples with 2.5% NaCl. Cooking loss was lower (P < 0.05) in the samples salted with 5% and 10% NaCl, and similarity was observed between the levels 0 and 7.5% salt. The treatments with levels 0% and 2.5% NaCl had higher mesophilic counts. The other microbiological parameters were within limits established by law. Therefore, salting with 5% NaCl can be used in pork meat in order to maintain the physicochemical and microbiological characteristics of the final product.

Chemical and physical characterization of mume fruit collected from different locations and at different maturity stages in São Paulo State

Prunus mume is widely studied due to its health benefits regarding increase of blood fluidity and consequent improvement of the cardiovascular system and the prevention or even the fight against different types of cancer. However, in Brazil this culture is found only among oriental descendants. The present study aimed to characterize mume fruit collected from three different locations in the State of São Paulo regarding general aspects such as pH, total titratable acidity (TTA), total soluble solids (TTS), pectin content and yield of pulp and chemical characteristics: total phenolic compounds (TPC) and antioxidant capacity. Mume fruit were collected unripe and analyzed until maturation about 88 days after flowering. Fruit collected in Botucatu came from a commercial mume fruit producer and had average weight of 16.9 g, while in fruit from other locations weight varied from 5.7-6.9 g. TSS ranged from 9.5 to 10.0 Brix, total solids was 10.2-12.2% and pH showed values between 2.5 and 2.7 for all locations. TTA expressed in citric acid decreased from 4.0-5.7 g (100g- 1) at unripe stage to 2.0-3.8 g (100g- 1) in mature-stage fruit. Pectin content decreased from 11.2 to 10.8% during fruit maturation, TPC content was 147-226 mg catechin (g- 1) on a dry matter basis and the antioxidant capacity was 96-169 µMol Trolox (g- 1) on a dry matter basis or 21-34 µMol Trolox (g- 1) on a wet matter basis.

Phenols, flavonoids and antioxidant activity of aqueous and methanolic extracts of propolis (Apis mellifera L.) from Algarve, South Portugal

Propolis is a resinous substance collected by honeybees to seal honeycomb, which has been used in folk medicine due to its antimicrobial and antioxidant properties. In the present study, water and methanol were used to extract phenols and flavonoids from propolis collected in thirteen different areas in the Algarve region during the winter and spring. The ABTS•+, DPPH•, and O2•- scavenging capacity, and metal chelating activity were also evaluated in the propolis samples. Methanol was more effective than water in extracting total phenols (2.93-8.76 mg/mL) (0.93-2.81 mg/mL). Flavones and flavonols were also better extracted with methanol (1.28-2.76 mg/mL) than with water (0.031-0.019 mg/mL). The free radical scavenging activity, ABTS (IC50=0.006-0.036 mg/mL), DPPH (IC50=0.007-0.069 mg/mL) and superoxide (IC50=0.001-0.053 mg/mL), of the samples was also higher in methanolic extracts. The capacity for chelating metal ions was higher in aqueous extracts (41.11-82.35%) than in the methanolic ones (4.33-29.68%). Propolis from three locations of Algarve region were richer in phenols and had better capacity for scavenging free ABTS and DPPH radicals than the remaining samples. These places are part of a specific zone of Algarve known as Barrocal.

Reconstruction of cranial bone defects with fiber-reinforced composite–bioactive glass implants

A cranial bone defect may result after an operative treatment of trauma, infection, vascular insult, or tumor. New biomaterials for cranial bone defect reconstructions are needed for example to mimic the biomechanical properties and structure of cranial bone. A novel glass fiber-reinforced composite implant with bioactive glass particulates (FRC–BG, fiber-reinforced composite–bioactive glass) has osteointegrative potential in a preclinical setting. The aim of the first and second study was to investigate the functionality of a FRC–BG implant in the reconstruction of cranial bone defects. During the years 2007–2014, a prospective clinical trial was conducted in two tertiary level academic institutions (Turku University Hospital and Oulu University Hospital) to evaluate the treatment outcome in 35 patients that underwent a FRC–BG cranioplasty. The treatment outcome was good both in adult and pediatric patients. A number of conventional complications related to cranioplasty were observed. In the third study, a retrospective outcome evaluation of 100 cranioplasty procedures performed in Turku University Hospital between years 2002–2012 was conducted. The experimental fourth study was conducted to test the load-bearing capacity and fracture behavior of FRC–BG implants under static loading. The interconnective bars in the implant structure markedly increased the load-bearing capacity of the implant. A loading test did not demonstrate any protrusions of glass fibers or fiber cut. The fracture type was buckling and delamination. In this study, a postoperative complication requiring a reoperation or removal of the cranioplasty material was observed in one out of five cranioplasty patients. The treatment outcomes of cranioplasty performed with different synthetic materials did not show significant difference when compared with autograft. The FRC–BG implant was demonstrated to be safe and biocompatible biomaterial for large cranial bone defect reconstructions in adult and pediatric patients.

Whole and crushed nutlets of chia (Salvia hispanica) from Mexico as a source of functional gums

The objective of this study was to characterize the chemical and functional properties of Mexican chia (Salvia hispanica) gums extracted from defatted whole and crushed nutlets using the Soxhlet and SFE-CO2 methods. Chia gums have interesting chemical and functional properties for the food industry. The oil and gum yields were in the range of 1.98-16.42% and 5.81-12.60%, respectively. The defatting procedure did not affect significantly the oil and gum extraction; the nutlet type (whole or crushed) was the only parameter influencing the yield. The proximate composition and the protein and fiber contents of chia gum were evaluated. Low contents of protein and fiber and high NFE levels were found in whole nutlet gums. The functional properties of chia gum extracted from whole and crushed nutlets with the Soxhlet and SFE-COs methods showed the following ranges of water absorption capacity of 62.64 to 143.66 g/g, water adsorption capacity of 0.69 to 1.35 g/g, and water and oil holding capacity of 100 to 149.28 g/g and19.5 to 40.4 g/g, respectively. The rheological behavior exhibited by the gums was pseudoplastic or shear thinning. From a functional perspective, chia gum is an important food component due its emulsifier and stabilizer potentials.

Nutritional quality and bioactive compounds of partially defatted baru almond flour

This study aimed to investigate the nutritional quality and bioactive potential of partially defatted baru (Dipteryx alataVog.) almond flour (BAF). The flour’s proximate and mineral compositions, total phenolic, tocopherols and carotenoids contents, antioxidant capacity, trypsin inhibitor and amino acid analyses were performed. An experiment was conducted with 24 male Wistar rats in order to evaluate the flour’s protein quality. BAF has high protein, fiber and mineral contents (iron, zinc, magnesium and copper), and it is a source of calcium. BAF presented relevant amounts of total phenolics (625 mg/100g) and good antioxidant capacity (130 µmol/Trolox eq). Autoclaved BAF showed essential amino acids profile, digestibility and protein quality better than in natura BAF. Autoclaved BAF might be used for human consumption as a source of quality protein and bioactive compounds, in healthy diets and processed foods.

A modified nominal stress method for fatigue assessment of steel plates with thermally cut edges

Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.

Exploring two cases of Piano Teacher Education in Finland and Germany

Research about music instrument teacher education is scattered and fairly recent, especially in the European context. The purpose of this study was to explore two cases of piano teacher education programs at higher music education institutions, one in Finland, and one in Germany, to gain insights into the preparation of piano teachers for their professional working life. The aim was to identify issues for consideration in curriculum development of piano teacher education to enhance the teaching and learning of piano playing, and to ultimately increase musical practice and engagement among young learners. Nine semi-structured interviews with piano teacher educators, heads of program, other lecturers within the program, and student piano teachers in both cases were analyzed using applied thematic analysis. Three main themes with subcategories emerged: (1) the organization of the piano teacher education program, such as the structure, the content, the learning environments provided, and the development mechanisms of the program; (2) the views on the piano teacher profession, the working environment and resulting requirements, including further education during professional life; and (3) the professional skills and teacher identity development of student teachers. While the supposed working environments and requirements of future piano teachers, the student teachers' development characteristics, and the content were found reasonably concurrent in both cases, the structure of the teacher education program, and the organization of learning environments presented notable differences. While the complete teacher qualification in the Finnish case was offered as option in the Bachelor and Master of Music program within the piano department, the German case offered a separate program for music instrument educators. Other main differences concerned the organizations of practical teaching experiences, and the linking of practical with theoretical pedagogy. Conviction and enthusiasm for improving piano and other music instrument teacher education seemed remarkable. These improvements could include the development of a comprehensive teacher education pedagogy for music instrument teacher educators, intensified cross-linking within and of higher music education institutions in local contexts, and the expansion of professional development opportunities.

Grass-endophyte coevolution and ploidy levels in fescues

ABSTRACT Fescues consist of wild and cultivated grasses that have adapted to a wide range of environmental conditions. They are an excellent model species for evolutionary ecology studies that investigate symbiosis and polyploidization and their effects on plant performance. First, they are frequently infected with symbiotic endophytic fungi known to affect a plant’s ability to cope with biotic and abiotic environmental factors. Second, fescue species have been reported to have substantial intraspecific variation in their ploidy level and morphology. In my thesis, I examined large-scale generalizations for frequency of polyploidy and endophyte infections and their effects on plant morphology. As a model species, I selected red (Festuca rubra) and viviparous sheep’s (F. vivipara) fescues. They are closely related, but they differ in terms of distribution and endophyte infection frequency. I investigated the biogeographic pattern and population biology of 29 red and 12 viviparous sheep’s fescue populations across ≈300 latitudes in Europe (400-690 N). To examine plant ploidy levels, I implemented time- and cost-efficient plate-based high throughput flow cytometric analysis. This efficient procedure enabled me to analyze over 1000 red fescue individuals. I found three ploidy levels among them: overall 84 %, 9 % and 7 % of the red fescue plants were hexaploid, tetraploid and octoploid, respectively. However, all viviparous sheep’s fescue plants were tetraploid. Ploidy level of red fescue appeared to some extent follow gradients in latitude and primary production as suggested by previous studies, but these results could be explained better by taking the sampling design and local adaptation into account. Three Spanish populations were mostly tetraploids and one high elevation population in northernmost Finland (Halti) was octoploid, while most other populations (25 sites) were dominated by hexaploids. Endophyte infection frequencies of wild fescue populations varied from 0 to 81 % in red fescue populations and from 0 to 30 % in viviparous sheep’s fescue populations. No gradients with latitude or primary production of the sites were detected. As taxonomy of red fescues is somewhat unclear, I also studied morphology, ploidy variation and endophyte status of proposed subspecies of European red fescues. Contrary to previous literature, different ploidy levels occurred in the same subspecies. In addition to wild fescues, I also used two agronomically important cultivars of meadow and tall fescue (Schedonorus phoenix and S. pratensis). As grass-legume mixtures have an agronomic advantage over monocultures in meadows, I carried out a mixture/competition experiment with fescues and red clover to find that species composition, nutrient availability and endophyte status together determined the total biomass yield that was higher in mixtures compared to monocultures. The results of this thesis demonstrate the importance of local biotic and abiotic factors such as grazing gradients and habitat types, rather than suggested general global geographical or environmental factors on grass polyploidization or its association with symbiotic endophytic fungi. I conclude that variation in endophyte infection frequencies and ploidy levels of wild fescues support the geographic mosaic theory of coevolution. Historical incidents, e.g., glaciation and present local factors, rather than ploidy or endophyte status, determine fescue morphology.

Managing the change of organizational culture in cross-border mergers and acquisitions: The role of post-acquisition integration in organizational culture change

Over the years, cross-border mergers and acquisitions have become a popular strategic option for variety of firms. Companies often seek rapid growth through acquiring potentially valuable enterprises or attempting to enhance their organization’s profitability by merging with other firms. However, managing the change of organizational culture is a major managerial challenge as companies often confront difficulties when merging two previously autonomous organizational cultures into one, joint organizational culture. Therefore, the purpose of this study is to increase understanding related to the challenges and possibilities concerning the management of organizational culture change in cross-border mergers and acquisitions. The research question “How to manage the change of organizational culture in cross-border mergers and acquisitions?” is analysed in relation to the theories presented in this thesis regarding organizational culture, organizational change and acculturation as well as in relation with the collected empirical data. The research question is divided into three sub-questions according to the following: (1) “What is the role of organizational culture in organizations?”, (2) “How to manage organizational change in mergers and acquisitions?” and (3) “How to manage organizational culture change through acculturation?”. The thesis is conducted as a qualitative case study research including three personal interviews and one group interview. The interviews were conducted as a combination of semi-structured and unstructured interviews. Theories related to organizational culture, the management of change as well as acculturation are studied and further analysed in relation to empirical material collected by the researcher. Research findings indicate that that several factors can influence the success of managing the organizational culture change in cross-border mergers and acquisitions. Factors such as defining the preferred acculturation model prior the merger; managing the resistance of change; open communication; acknowledgement of local culture and cultural differences; involvement of personnel in change processes; as well as the formulation and implementation of comprehensive change plans proved to be important factors with relation to successful management of organizational culture change