Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and ""chairside"" treatments of the post surface

Purpose: To evaluate the influence of surface treatments on microtensile bond strength of luting resin cements to fiber posts. Materials and Methods: Forty-two quartz fiber posts (Light Post, RTD) were divided into 7 groups (n = 6) according to the surface treatment. I and 11: experimental patented industrial treatment consisting of zirconium oxide coating and silanization (RTD); III: industrial treatment followed by adhesive application (XPBond, Dentsply Caulk); IV: adhesive (XPBond); V: adhesive (Prime&Bond NT, Dentsply Caulk); VI: silane (Calibra Silane, Dentsply Caulk); VII: no treatment. Adhesives were used in the self-curing mode. Two cements (Sealbond, RTD - group 1, and Calibra, Dentsply Caulk - groups 11 to VII) were applied on the posts to produce cylindrical specimens. Post/cement interfaces were evaluated under SEM. The surface of the industrially coated posts was examined using energy dispersive analysis by x-ray. Cylinders were cut to obtain microtensile sticks that were loaded in tension at a crosshead speed of 0.5 mm/min until failure. Statistical analysis was performed using Kruskal-Wallis analysis of variance followed by Dunn`s multiple range test for post-hoc comparisons (p < 0.05). Weibull analysis was also performed. Results: The post/cement bond strength was significantly higher on fiber posts treated industrially (I: 23.14 +/- 8.05 MPa; II: 21.56 +/- 7.07 MPa; III: 22.37 +/- 7.00 MPa) or treated with XPBond adhesive (IV: 21.03 +/- 5.34 MPa) when compared to Prime&Bond NT application (V: 14.05 +/- 5.06 MPa), silanization (VI: 6.31 +/- 4.60 MPa) or no treatment (VII: 4.62 +/- 4.31) of conventional fiber posts (p < 0.001). Conclusion: The experimental industrial surface treatment and the adhesive application enhanced fiber post to resin cement interfacial strength. Industrial pretreatment may simplify the clinical luting procedure.

Relations between coal petrology and gas content in the Upper Newlands Seam, central Queensland, Australia

The Upper Newlands Seam in the northern Bowen Basin, Queensland, Australia consists of six benches (A-F) that have different petrographic assemblages. Benches C and E contain relatively abundant inertodetrinite and mineral matter, as well as anomalously high reflectance values; these characteristics support a largely allochthonous, detrital origin for the C and E benches. Fractures and cleats in the seam show a consistent orientation of northeast- southwest for face cleats, and a wide range of orientations for fractures. Cleat systems are well developed in bright bands, with poor continuity in the dull coal. Both maceral content and cleat character are suggested to influence gas drainage in the Upper Newlands Seam. A pronounced positive correlation between vitrinite abundance and gas desorption data suggests more efficient drainage from benches with abundant vitrinite. Conversely, inertinite-rich benches are suggested to have less efficient drainage, and possibly retain gas within pore spaces, which could increase the outburst potential of the coal. (C) 2001 Elsevier Science BN. All rights reserved.

International childcare practices study: Infant sleeping environment

Background: The International Child Care Practices Study (ICCPS) has collected descriptive data from 21 centres in 17 countries. In this report, data are presented on the infant sleeping environment with the main focus being sudden infant death syndrome (SIDS) risk factors (bedsharing and infant using a pillow) and protective factors (infant sharing a room with adult) that are not yet well established in the literature. Methods: Using a standardised protocol, parents of infants were surveyed at birth by interview and at 3 months of age mainly by postal questionnaire. Centres were grouped according to geographic location. Also indicated was the level of SIDS awareness in the community, i.e. whether any campaigns or messages to “reduce the risks of SIDS” were available at the time of the survey. Results: Birth interview data were available for 5488 individual families and 4656 (85%) returned questionnaires at 3 months. Rates of bedsharing varied considerably (2–88%) and it appeared to be more common in the samples with a lower awareness of SIDS, but not necessarily a high SIDS rate. Countries with higher rates of bedsharing appeared to have a greater proportion of infants bedsharing for a longer duration (>5 h). Rates of room sharing varied (58–100%) with some of the lowest rates noted in centres with a higher awareness of SIDS. Rates of pillow use ranged from 4% to 95%. Conclusions: It is likely that methods of bedsharing differ cross-culturally, and although further details were sought on different bedsharing practices, it was not possible to build up a composite picture of “typical” bedsharing practices in these different communities. These data highlight interesting patterns in child care in these diverse populations. Although these results should not be used to imply that any particular child care practice either increases or decreases the risk of SIDS, these findings should help to inject caution into the process of developing SIDS prevention campaigns for non-Western cultures.

Conceptualising the virtual and the posthuman

This article aims to explore the relations between technology and the subject. With new media intensifying the provisionality of discursive structures and in turn embodied experiences, questions pertaining to virtuality have become vital, particularly since Western society's increasing reliance on technologies now permeates our everyday practices. While many theorists often resort to a reification of the subject when conceptualising the posthuman condition, this analysis will recover the notion of embodiment in order to avoid such technological determinism. Tracing this complexity in contemporary texts can be achieved through various means. Here, the focus will remain on how narrative frameworks can create new possibilities for understanding and interpreting shifting subjectivities in the digital age. To explore this, I shall provide an analysis of a contemporary film, Being John Malkovich, which has been chosen due to its unexpected success at the box office, indicating how finely attuned the film is to contemporary concerns.

Economics teaching in Australian universities: Rewards and outcomes

This paper presents evidence from two survey's to help explain the poor ratings consistently given to the teaching of economics at Australian universities. The evidence suggests that the Poor ratings of economics teaching can be attributed to two related factors: inappropriate pedagogical practices and lack of rewards for allocating additional time to teaching. The survey data oil pedagogy, in economics consist of 205 responses from graduates from two Queensland universities. The time elapsed since graduation ranges from 1 to 10 years. The survey data on academics' time allocation consist of 290 responses from academic economists across a wide range of Australian universities.

Effects of slurry rheology on industrial grinding performance

To determine the effect of slurry rheology on industrial grinding performance, 45 surveys were conducted on 16 full-scale grinding mills in five sites. Four operating variables - mill throughput, slurry density, slurry viscosity and feed fines content-were investigated. The rheology of the mill discharge slurries was measured either on-line or off-line, and the data were processed using a standard procedure to obtain a full range of flow curves. Multi-linear regression was employed as a statistical analysis tool to determine whether or not rheological effects exert an influence on industrial grinding, and to assess the influence of the four mill operating conditions on mill performance in terms of the Grinding Index, a criterion describing the overall breakage of particles across the mill. The results show that slurry rheology does influence industrial grinding. The trends of these effects on Grinding Index depend upon the rheological nature of the slurry-whether the slurries are dilatant or pseudoplastic, and whether they exhibit a high or low yield stress. The interpretation of the regression results is discussed, the observed effects are summarised, and the potential for incorporating rheological principles into process control is considered, Guidelines are established to improve industrial grinding operations based on knowledge of the rheological effects. This study confirms some trends in the effect of slurry rheology on grinding reported in the literature, and extends these to a broader understanding of the relationship between slurry properties and rheology, and their effects on industrial milling performance. (C) 2002 Elsevier Science B.V. All rights reserved.

The non-existence of a utility function and the structure of non-representable preference relations

In this paper we investigate the structure of non-representable preference relations. While there is a vast literature on different kinds of preference relations that can be represented by a real-valued utility function, very little is known or understood about preference relations that cannot be represented by a real-valued utility function. There has been no systematic analysis of the non-representation problem. In this paper we give a complete description of non-representable preference relations which are total preorders or chains. We introduce and study the properties of four classes of non-representable chains: long chains, planar chains, Aronszajn-like chains and Souslin chains. In the main theorem of the paper we prove that a chain is non-representable if and only it is a long chain, a planar chain, an Aronszajn-like chain or a Souslin chain. (C) 2002 Published by Elsevier Science B.V.