A comparison of the estrous behavior of Holstein-Friesian cows when cubicle-housed and at pasture

This study compared estrous behavior of dairy cows kept in cubicle housing and fed a total mixed ration diet (HOUSED treatment) with that of cows kept at pasture with concentrate supplementation (PASTURE treatment). Behavior was compared both in the 48 h around standing estrus and during the standing estrus period. The 23 spring-calving Holstein-Friesians in each treatment were observed directly three times per day for nine weeks. The occurrence of nine selected behaviors associated with estrus was recorded during 20 min observation sessions. Twelve standing estrus events from each treatment were selected for analysis of the frequency of these nine behaviours over the 48 h around standing estrus. Milk progesterone profiles were used to confirm the dates of standing estrus events. Attempting to mount other cows, sniffing the anogenital region of other cows, resting the chin on other cows, receiving chin rests and head-to-head butts all showed significant changes in frequency in the 48 h around standing estrus in both treatments, reaching a peak during standing estrus (P ≤ 0.05). Mounting other cows increased significantly in the PASTURE treatment around standing estrus (P <0.001), but not in the HOUSED treatment. The frequency of ano-genital sniffs received by the animals in the PASTURE treatment also increased significantly around standing estrus (P <0.01) but not in the HOUSED treatment. When the animals were in standing estrus there was a significantly higher frequency of standing to be mounted in PASTURE than in HOUSED cows (median (q1, q3) PASTURE = 2.5 (1.0, 3.0), HOUSED = 0.0 (0.0, 1.0)) (P <0.01), but no difference in the frequency of the other eight sexual behaviors recorded. HOUSED cows did not exhibit the same increase in mounting during the standing estrus period as PASTURE cows and received fewer mounts in observation sessions during standing estrus. These results have implications for the use of estrus detection systems that rely solely on mounting behavior in cubicle-housed dairy cows. © 2012 Elsevier Inc.

Impulsão horizontal de futebolistas da segunda divisão do campeonato gaúcho

No futebol a impulsao tem impacto no cabeceio, nos movimentos de antecipaçoes, nos diferentes saltos e de forma geral, na velocidade das açoes de jogo. No entanto, ao contrário de outros esportes como Basquete, Vôlei, Handebol, o seu treinamento específico é pouco visado no futebol. O objetivo deste estudo é verificar, em atletas profissionais de futebol de campo, o perfil da impulsao horizontal e o desenvolvimento dessa durante uma temporada de treinamento e jogos pela segunda divisao do campeonato gaúcho. Foram avaliados 18 atletas de futebol (com média de idade 25±5,44 anos, altura 177,5±6,48 cm e massa corporal 79,4±9,67 kg). Os atletas se submeteram a testes de impulsao horizontal no início (pré) e após três meses de treinamentos (pós). Mediu-se os saltos com ambas às pernas, cinco saltos consecutivos com membro direito (MID) e esquerdo (MIE) e cinco saltos alternados. O perfil de impulsao obtido no pré-teste foi respectivamente 2,22±0,14m, 11,46±0,56 m, 11,69±0,73m e 12,04±0,78m. Os resultados do pós-teste nao se alteraram em comparaçao ao primeiro teste, sendo respectivamente 2,22±0,15m, 11,26±1,12m, 11,46±0,95m e 12,02±0,76m. Conclui-se que o treinamento nao foi capaz de proporcionar desenvolvimento desta capacidade, pois predominantemente as rotinas de treinamento de futebol nao enfocam este desenvolvimento

Learning from one another: evaluating the impact of horizontal knowledge exchange for environmental management and governance

There is increasing advocacy for inclusive community-based approaches to environmental management, and growing evidence that involving communities improves the sustainability of social-ecological systems. Most community-based approaches rely on partnerships and knowledge exchange between communities, civil society organizations, and professionals such as practitioners and/or scientists. However, few models have actively integrated more horizontal knowledge exchange from community to community. We reflect on the transferability of community owned solutions between indigenous communities by exploring challenges and achievements of community peer-to-peer knowledge exchange as a way of empowering communities to face up to local environmental and social challenges. Using participatory visual methods, indigenous communities of the North Rupununi (Guyana) identified and documented their community owned solutions through films and photostories. Indigenous researchers from this community then shared their solutions with six other communities that faced similar challenges within Guyana, Suriname, Venezuela, Colombia, French Guiana, and Brazil. They were supported by in-country civil society organizations and academics. We analyzed the impact of the knowledge exchange through interviews, field reports, and observations. Our results show that indigenous community members were significantly more receptive to solutions emerging from, and communicated by, other indigenous peoples, and that this approach was a significant motivating force for galvanizing communities to make changes in their community. We identified a range of enabling factors, such as building capacity for a shared conceptual and technical understanding, that strengthens the exchange between communities and contributes to a lasting impact. With national and international policy-makers mobilizing significant financial resources for biodiversity conservation and climate change mitigation, we argue that the promotion of community owned solutions through community peer-to-peer exchange may deliver more long-lasting, socially and ecologically integrated, and investment-effective strategies compared to top-down, expert led, and/or foreign-led initiatives.

Analyse numérique du changement de phase solide-liquide autour d'un tube horizontal soumis à une sollicitation thermique périodique

Ce mémoire présente un modèle mathématique et numérique pour analyser le comportement d’une unité de stockage thermique à changement de phase solide-liquide représentée par un tube autour duquel se trouve le matériau à changement de phase. Le système est soumis à une charge oscillant entre le chauffage et le refroidissement. Une analyse d’ordre de grandeur permet de prédire le comportement du système en fonction des principaux nombres adimensionnels. Un paramètre adimensionnel est proposé pour délimiter les concepts dans lesquels la conduction domine par rapport à ceux où la convection naturelle domine. L’étude dévoile l’impact des paramètres de conception de l’unité de stockage thermique sur son fonctionnement et approfondit les connaissances dans le domaine du changement de phase avec convection naturelle. Différents indicateurs ont été développés pour analyser la performance du système, tels que les dimensions de la zone affectée thermiquement, le volume fondu ou solidifié et une analyse fréquentielle. Des corrélations sont proposées pour déterminer facilement le comportement du système.

Regeneração óssea guiada horizontal prévia à colocação de implante

A técnica de Regeneração Óssea Guiada (ROG) é um procedimento que tem por objetivo a reposição do volume ósseo da crista alveolar necessário para garantir o sucesso da reabilitação oral recorrendo a implantes, repondo tanto a componente estética como funcional. Este trabalho foca apenas a ROG horizontal prévia à colocação de implantes e analisa o sucesso e a previsibilidade clínica deste procedimento de aumento ósseo, o sucesso e a sobrevivência de implantes colocados em osso regenerado bem como alguns tipos de enxertos ósseos e membranas. Metodologicamente consiste numa revisão de literatura, baseando-se numa pesquisa de artigos em bases de dados on-line e recorrendo também à consulta de livros em formato digital. As palavras-chave utilizadas na pesquisa on-line foram: “bone healing” AND “tooth extraction”, “bone resoption” AND “tooth extraction”, “bone regeneration” AND “dental implants”, “horizontal guided bone regeneration”, “horizontal guided bone regeneration” AND “dental implants”, “horizontal bone augmentation” “horizontal bone augmentation” AND “dental implants”, “lateral bone augmentation” AND “dental implants”, “horizontal ridge augmentation” AND “dental implants”. A regeneração óssea guiada manifesta comprovado sucesso e previsibilidade no aumento ósseo e os implantes colocados em osso regenerado demonstram sucesso a longo-prazo.

Regulación de potencia de un aerogenerador de eje horizontal a partir de un sistema de control de velocidad de rotación

Tesis (Ingeniero(a) Eléctrico).--Universidad de La Salle. Facultad de Ingeniería. Programa de Ingeniería Eléctrica, 2014

Adubação de sistemas: antecipação de adubação nitrogenada para a cultura do milho em integração lavoura-pecuária

Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.

Altura do pasto e adubação nitrogenada sobre a produção de forragem e eficiência no uso de nutrientes em sistema de integração lavoura-pecuária

The proper use of management strategies, such as grazing intensity and nitrogen fertilization are primordial to the success of integrated crop-livestock system. Several studies have demonstrated the influence of grazing intensity and nitrogen fertilization on dynamics of forage production and nutrient cycling. However, most this researches studying these strategies in isolation and little is known about the interaction of these factors in the management of an integrated crop-livestock system. In this context, the aim of this study is to determine the best management strategy involving sward height and nitrogen fertilization, permitting greater forage production and improved efficiency in the use of nitrogen soil by a black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture in integrated crop-livestock system. The experiment was realized in Abelardo Luz – SC, in an area of 14 ha, where has been conducted an experiment in long term with integrated crop-livestock system under no-tillage since 2012. The experimental design is a randomized block design with three replications in a factorial design (2x2), the first factor was the grazing intensity (high and low), characterized by two sward height management (10 and 25 cm), and the second included the time factor application of N in the system: N applied on pasture (N-pasture) and N applied on the culture of grain (N-grain), at dose of 200 kg N ha stocking and variable stocking rate. The previous crop to pasture was corn. The nitrogen fertilization of pasture increased tiller density, forage density, participation of ryegrass ‘Barjumbo’ and percentage of ryegrass leaves in forage mass. Forage mass was less at low sward height on average, however the percentage of ryegrass ‘Barjumbo’ and rye leaves was greater and dead material was lower in this treatment. With nitrogen fertilization of pasture it was possible to double the amount of forage accumulated in periods with further development of ryegrass, furthermore, the total production of DM was increased in 38.4% and the shoot N concentration in 28.6%. When the nitrogen fertilization is applied in pasture, it is possible to keep black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture with an average sward height of 11 cm. The residual effect of N applied at corn was not sufficient to meet the nutritional needs of pasture and the forage production was affected by periods with N deficiency, while a single application of 200 kg N ha was sufficient to meet the N requirements throughout the forage accumulation period. The black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture is efficient in use and recovery of the nitrogen applied in both treatments of sward height.

Oil Retention and Pressure Drop in Horizontal and Vertical Suction Lines with R410A / POE ISO 32

In refrigeration systems a small amount of compressor lubricant is entrained in the refrigerant and circulated through the system, where some is retained in each component. The suction line to the compressor has the largest potential for oil retention. This paper presents results from an experimental apparatus that has been constructed to circulate POE (polyolester) oil and R410A at a controlled mass flux, OCR (oil in circulation ratio), and apparent superheat, and to directly measure the pressure drop and mass of oil retained in horizontal and vertical suction lines. The bulk vapor velocity and overall void fraction are determined from direct mass and temperature measurements. The oil retention, pressure drop, and flow regimes near the minimum ASHRAE recommended mass flux condition are explored. It was found that oil retention begins to increase sharply even above the minimum recommended flux, so conditions near the minimum should be avoided. Two relationships were developed to predict the oil retention in the vertical and horizontal suction lines. The average error from the predictions method was 10.9% for the vertical tube, and 7.9% for the horizontal tube.

Probabilistic design optimization of horizontal axis wind turbine rotors

Considerable interest in renewable energy has increased in recent years due to the concerns raised over the environmental impact of conventional energy sources and their price volatility. In particular, wind power has enjoyed a dramatic global growth in installed capacity over the past few decades. Nowadays, the advancement of wind turbine industry represents a challenge for several engineering areas, including materials science, computer science, aerodynamics, analytical design and analysis methods, testing and monitoring, and power electronics. In particular, the technological improvement of wind turbines is currently tied to the use of advanced design methodologies, allowing the designers to develop new and more efficient design concepts. Integrating mathematical optimization techniques into the multidisciplinary design of wind turbines constitutes a promising way to enhance the profitability of these devices. In the literature, wind turbine design optimization is typically performed deterministically. Deterministic optimizations do not consider any degree of randomness affecting the inputs of the system under consideration, and result, therefore, in an unique set of outputs. However, given the stochastic nature of the wind and the uncertainties associated, for instance, with wind turbine operating conditions or geometric tolerances, deterministically optimized designs may be inefficient. Therefore, one of the ways to further improve the design of modern wind turbines is to take into account the aforementioned sources of uncertainty in the optimization process, achieving robust configurations with minimal performance sensitivity to factors causing variability. The research work presented in this thesis deals with the development of a novel integrated multidisciplinary design framework for the robust aeroservoelastic design optimization of multi-megawatt horizontal axis wind turbine (HAWT) rotors, accounting for the stochastic variability related to the input variables. The design system is based on a multidisciplinary analysis module integrating several simulations tools needed to characterize the aeroservoelastic behavior of wind turbines, and determine their economical performance by means of the levelized cost of energy (LCOE). The reported design framework is portable and modular in that any of its analysis modules can be replaced with counterparts of user-selected fidelity. The presented technology is applied to the design of a 5-MW HAWT rotor to be used at sites of wind power density class from 3 to 7, where the mean wind speed at 50 m above the ground ranges from 6.4 to 11.9 m/s. Assuming the mean wind speed to vary stochastically in such range, the rotor design is optimized by minimizing the mean and standard deviation of the LCOE. Airfoil shapes, spanwise distributions of blade chord and twist, internal structural layup and rotor speed are optimized concurrently, subject to an extensive set of structural and aeroelastic constraints. The effectiveness of the multidisciplinary and robust design framework is demonstrated by showing that the probabilistically designed turbine achieves more favorable probabilistic performance than those of the initial baseline turbine and a turbine designed deterministically.

Liquid film dynamics in horizontal and tilted tubes: dry spots and sliding drops

Using a model derived from lubrication theory, we consider the evolution of a thin viscous film coating the interior or exterior of a cylindrical tube. The flow is driven by surface tension and gravity and the liquid is assumed to wet the cylinder perfectly. When the tube is horizontal, we use large-time simulations to describe the bifurcation structure of the capillary equilibria appearing at low Bond number. We identify a new film configuration in which an isolated dry patch appears at the top of the tube and demonstrate hysteresis in the transition between rivulets and annular collars as the tube length is varied. For a tube tilted to the vertical, we show how a long initially uniform rivulet can break up first into isolated drops and then annular collars, which subsequently merge. We also show that the speed at which a localized drop moves down the base of a tilted tube is non-monotonic in tilt angle.

Pasture production and composition response after killing Eucalypt trees with herbicides in central Queensland

Clearing woodlands is practised world-wide to increase crop and livestock production, but can result in unintended consequences including woody regrowth and land degradation. The pasture response of 2 eucalypt woodlands in the central Queensland rangelands to killing trees with herbicides, in the presence or absence of grazing and regular spring burning, was recorded over 7 or 8 years to determine the long-term sustainability of these common practices. Herbage mass and species composition plus tree dynamics were monitored in 2 replicated experiments at each site. For 8 years following herbicide application, killing Eucalyptus populnea F. Muell. (poplar box) trees resulted in a doubling of native pasture herbage mass from that of the pre-existing woodland, with a tree basal area of 8.7 m2 ha-1. Conversely, over 7 years with a similar range of seasons, killing E. melanophloia F. Muell. (silver-leaved ironbark) trees of a similar tree basal area had little impact on herbage mass grown or on pasture composition for the first 4 years before production then increased. Few consistent changes in pasture composition were recorded after killing the trees, although there was an increase in the desirable grasses Dichanthium sericeum (R. Br.) A. Camus (Queensland bluegrass) and Themeda triandra Forssk. (kangaroo grass) when grazed conservatively. Excluding grazing allowed more palatable species of the major grasses to enhance their prominence, but seasonal conditions still had a major influence on their production in particular years. Pasture crown basal area was significantly higher where trees had been killed, especially in the poplar box woodland. Removing tree competition did not have a major effect on pasture composition that was independent of other management impositions or seasons, and it did not result in a rapid increase in herbage mass in both eucalypt communities. The slow pasture response to tree removal at one site indicates that regional models and economic projections relating to tree clearing require community-specific inputs.

Analyzing the effect of connecting horizontal tidal stream turbines on the pier of a sea established bridge

In this thesis, producing ability of electricity by horizontal tidal current turbines and installing possibility of these turbines on bridge's piers in the marine environments has been studied to reduce primary implementation costs and make the plan, economical. To do this and to study its feasibility, the exerted forces from installing horizontal tidal current turbines were compared with the forces applied to the bridge structure during designing process (given in the Standards). Then, the allowable ranges of the overloading which is tolerable by the piers of the bridge were obtained. Accordingly, it is resulted that for installing these turbines, the piers of the existing bridges are required to be strengthened. Because of increasing usage of renewable powers and as a suggestion, the exerted forces from installing turbine for loading coefficients of different Standards are given. Finally as an example, preliminary designing of a horizontal tidal current turbine was carried out for Gesham Channel and the forces exerted from turbine to the bridge's pier were calculated for the future usage in order to create a test site of real dimensions.

Grúa torre desmontable con brazo horizontal giratorio

Cálculo y diseño de una grúa torre desmontable con brazo horizontal giratorio destinada a la elevación y transporte de material de construcción en edificios de viviendas