Fossil plant remains in DSDP Leg 80 holes

The lower part of the syn-rift Barremian-?Hauterivian section at Site 549 contains a large amount of acid-resistant land-derived organic matter that, as elsewhere in the Cretaceous sediments of the IPOD Leg 80 sites, is thermally immature. This plant debris was derived from a vegetation made up of many species of pteridophytes and gymnosperms. The palynofacies indicate that the sediments were deposited in shallow marginal and nonmarine environments and that the climate was probably warm temperate and fairly moist at the time. Source potential for gas is suggested at some horizons. Most of the younger Lower Cretaceous sediments at this and the other sites were deposited in more open marine conditions. Although they generally contain less organic matter, land plant remains continue to comprise a major part of the palynofacies. The Upper Cretaceous sediments were mainly deposited in well oxygenated conditions and are organically lean. However, stratigraphically restricted dark-colored shales at Sites 549 to 551 contain relatively large quantities of amorphous detritus of at least partly marine origin. These characteristics are suggestive of deposition during periods of restricted circulation and also of source potential for oil and gas if maturation levels had been higher.

(Table 1) Chemical composition of Mediterranean halite from DSDP Hole 13-134

Bromine content of a 15 cm halite core from Deep Sea Drilling Project Leg XIII Hole 134 was analyzed at 1.5 cm intervals. The Br varies from 140 to 254 ppm, and three maxima were found to coincide with three postulated horizons of desiccation. The Br profile confirms the interpretation from sedimentologic evidence that Mediterranean salts were deposited in a desiccating basin.

Table 1: Soil chemical properties of the analysed depth profiles in the Venice lagoon

Visual traces of iron reduction and oxidation are linked to the redox status of soils and have been used to characterise the quality of agricultural soils.We tested whether this feature could also be used to explain the spatial pattern of the natural vegetation of tidal habitats. If so, an easy assessment of the effect of rising sea level on tidal ecosystems would be possible. Our study was conducted at the salt marshes of the northern lagoon of Venice, which are strongly threatened by erosion and rising sea level and are part of the world heritage 'Venice and its lagoon'. We analysed the abundance of plant species at 255 sampling points along a land-sea gradient. In addition, we surveyed the redox morphology (presence/absence of red iron oxide mottles in the greyish topsoil horizons) of the soils and the presence of disturbances. We used indicator species analysis, correlation trees and multivariate regression trees to analyse relations between soil properties and plant species distribution. Plant species with known sensitivity to anaerobic conditions (e.g. Halimione portulacoides) were identified as indicators for oxic soils (showing iron oxide mottles within a greyish soil matrix). Plant species that tolerate a low redox potential (e.g. Spartina maritima) were identified as indicators for anoxic soils (greyish matrix without oxide mottles). Correlation trees and multivariate regression trees indicate the dominant role of the redox morphology of the soils in plant species distribution. In addition, the distance from the mainland and the presence of disturbances were identified as tree-splitting variables. The small-scale variation of oxygen availability plays a key role for the biodiversity of salt marsh ecosystems. Our results suggest that the redox morphology of salt marsh soils indicates the plant availability of oxygen. Thus, the consideration of this indicator may enable an understanding of the heterogeneity of biological processes in oxygen-limited systems and may be a sensitive and easy-to-use tool to assess human impacts on salt marsh ecosystems.

Seismic modelling and ava analysis of hidrocarbon traps

In this study, forward seismic modelling of four geological models with Hydrocarbon (HC) traps were performed by ray tracing method to produce synthetic seismogram of each model. The idea is to identify the Hydrocarbon Indicators (HCI‟s) such as bright spot, flat spot, dim spot and Bottom Simulating Reflector (BSR) in the synthethic seismogram. The modelling was performed in DISCO/FOCUS 5.0 seismic data processing programme. Strong positive and negative reflection amplitudes and some artifact reflection horizons were observed on produced seismograms due to rapid changes in subsurface velocity and geometry respectively Additionally, Amplitude-versus-angle (AVA) curves of each HCIs was calculated by the Crewes Zoeppritz Explorer programme. AVA curves show that how the reflection coefficients change with the density and the P and S wave velocities of each layer such as oil, gas, gas hydrate or water saturated sediments. Due to AVA curves, an increase in reflection amplitude with incident angle of seismic waves corresponds to an indicator of a hydrocarbon reservoir

A new way of teaching different subjects in a foreign language in the Building Engineering Degree at the Universidad Politécnica.

The European Union has been promoting linguistic diversity for many years as one of its main educational goals. This is an element that facilitates student mobility and student exchanges between different universities and countries and enriches the education of young undergraduates. In particular, a higher degree of competence in the English language is becoming essential for engineers, architects and researchers in general, as English has become the lingua franca that opens up horizons to internationalisation and the transfer of knowledge in today’s world. Many experts point to the Integrated Approach to Contents and Foreign Languages System as being an option that has certain benefits over the traditional method of teaching a second language that is exclusively based on specific subjects. This system advocates teaching the different subjects in the syllabus in a language other than one’s mother tongue, without prioritising knowledge of the language over the subject. This was the idea that in the 2009/10 academic year gave rise to the Second Language Integration Programme (SLI Programme) at the Escuela Arquitectura Técnica in the Universidad Politécnica Madrid (EUATM-UPM), just at the beginning of the tuition of the new Building Engineering Degree, which had been adapted to the European Higher Education Area (EHEA) model. This programme is an interdisciplinary initiative for the set of subjects taught during the semester and is coordinated through the Assistant Director Office for Educational Innovation. The SLI Programme has a dual goal; to familiarise students with the specific English terminology of the subject being taught, and at the same time improve their communication skills in English. A total of thirty lecturers are taking part in the teaching of eleven first year subjects and twelve in the second year, with around 120 students who have voluntarily enrolled in a special group in each semester. During the 2010/2011 academic year the degree of acceptance and the results of the SLI Programme have been monitored. Tools have been designed to aid interdisciplinary coordination and to analyse satisfaction, such as coordination records and surveys. The results currently available refer to the first and second year and are divided into specific aspects of the different subjects involved and into general aspects of the ongoing experience.

Aerodynamic Analysis of Open Trailing Edge Airfoils at Low Reynolds Number

A study has been made on the influence of the open trailing edge in airfoils used in different devices relating their aerodynamic performances. Wind tunnel tests have been made at different Reynolds numbers and angles of attack in order to show this effect. Besides, a quantitative study of the aerodynamic properties has been made based on the different trailing edge thickness

SMA-Based Muscle-Like Actuation in Biologically Inspired Robots: A State of the Art Review

New actuation technology in functional or "smart" materials has opened new horizons in robotics actuation systems. Materials such as piezo-electric fiber composites, electro-active polymers and shape memory alloys (SMA) are being investigated as promising alternatives to standard servomotor technology [52]. This paper focuses on the use of SMAs for building muscle-like actuators. SMAs are extremely cheap, easily available commercially and have the advantage of working at low voltages. The use of SMA provides a very interesting alternative to the mechanisms used by conventional actuators. SMAs allow to drastically reduce the size, weight and complexity of robotic systems. In fact, their large force-weight ratio, large life cycles, negligible volume, sensing capability and noise-free operation make possible the use of this technology for building a new class of actuation devices. Nonetheless, high power consumption and low bandwidth limit this technology for certain kind of applications. This presents a challenge that must be addressed from both materials and control perspectives in order to overcome these drawbacks. Here, the latter is tackled. It has been demonstrated that suitable control strategies and proper mechanical arrangements can dramatically improve on SMA performance, mostly in terms of actuation speed and limit cycles.

Fundamentos antropológicos de las tecnologías biomédicas no terapéuticas

The important developments in technology in all areas of human life have generated high expectations and hopes with regard to the health sector. Science and technology have favored the development of incredible therapeutic treatments to help resolve numerous problems relating to illness and disability. Nonetheless, many developments in the therapeutic realm have given rise to discussions over the possibility of whether this same scientific and technological progress could be beneficial even for those who may not be sick. One may ask: why not apply the same knowledge and technology used for treatment of illness for conditions where therapy is not necessary, but there is a desire to care for, improve and enhance human person? These new horizons offered by biomedical technologies undoubtedly express a deep desire of every person for health, happiness, and a long life. In order to offer a response to these questions, current biomedical technologies and those in development offer a wide range of possibilities. Therefore, in this investigation we attempt to identify and define four areas of non-therapeutic treatment: illness prevention, health promotion, improving human nature, and human enhancement. These four areas, which do not directly regard illness, give rise to a series of questions, which range from those regarding the meaning of health and illness to those concerning anthropological questions, such as situations and conditions that must be taken into account so human dignity is respected. The treatment, improvement and enhancement of the human being imply clarifying in scientific and technological terms the truth and meaning of the human person as such. This research identifies and looks at the relationship between the four anthropological cornerstones which non-therapeutic biomedical technologies should be based upon so as not to impact or violate the dignity of the human person. This research presents the anthropological boundaries which non-therapeutic biomedical technologies should take into consideration so as not to alter or violate the dignity of the human person. At the same time, the research proposes an anthropological foundation on which to build a code of ethics for non-therapeutic biomedical technologies. El gran desarrollo de las tecnologías en todos los ámbitos de la vida del hombre ha generado una gran expectativa y esperanza en lo que se refiere a la salud. Ciencia y técnica están aportando grandes beneficios en materia terapéutica, ayudando a resolver muchos problemas concernientes a la enfermedad y a la discapacidad. Pero este desarrollo que se ha producido en el ámbito terapéutico nos conduce a la formulación de preguntas sobre las posibilidades que esos avances técnico-científicos pueden aportar en beneficio del hombre, cuando no se encuentra enfermo: ¿por qué no pueden aplicarse los conocimientos y tecnologías usados en terapia a un ámbito diferente, no terapéutico, con el fin de mantener, mejorar o incluso potenciar al hombre? Ciertamente los nuevos horizontes que abren las Tecnologías Biomédicas encuentran repercusión en el deseo de bienestar, de felicidad e incluso de prolongación de la vida presente en todos los hombres. Para responder a esta pregunta las Tecnologías Biomédicas han desarrollado y están desarrollando una gama muy amplia de posibilidades. En este trabajo intentamos organizar en cuatro áreas los conceptos de los tratamientos no-terapéuticos: prevención de la enfermedad, promoción de la salud, mejoramiento de la naturaleza humana y potenciación del hombre. Estas cuatro áreas, que no se refieren directamente a la enfermedad, generan una serie de interrogantes que van desde las preguntas sobre el significado de salud y enfermedad, hasta las cuestiones antropológicas relativas a la posibilidad y las condiciones que se han de dar para que tales acciones respeten la dignidad humana. Cuidar, mejorar y potenciar al hombre implica que los objetivos de la ciencia y de la técnica mantengan siempre claros los valores y la realidad del hombre en cuanto tal. ... Este Trabajo de Investigación presenta los límites antropológicos dentro de los cuales deben moverse las Tecnologías Biomédicas no-terapéuticas para no alterar el ser ni menoscabar la dignidad del hombre. Y ofrece los fundamentos antropológicos sobre los cuales se pueda construir un código ético y deontológico para las Tecnologías Biomédicas no-terapéuticas.

Geometric tools in Juan de Álava's stonecutting workshop

Stonemasonry of the Gothic vault in its totality is based upon geometry of the line, whereas classic stereotomy relies on the comprehensive knowledge of the surface and the highly sophisticated sides of the voussoirs necessary for its vaults. It is obvious that this leap in the art of construction was paralleled and accompanied by an extension of the horizons of geometry. In Spain, it was made possible thanks to the centuries-old tradition of stone building begun in the most remote medieval times and to the presence of outstanding architects or stonemasons such as Juan de Álava, whose professional work surpassed the established limits and provided the art of building with new instruments.

Use of prediction methods for patent and trademark applications in Spain

Patent and trademark offices which run according to principles of new management have an inherent need for dependable forecasting data in planning capacity and service levels. The ability of the Spanish Office of Patents and Trademarks to carry out efficient planning of its resource needs requires the use of methods which allow it to predict the changes in the number of patent and trademark applications at different time horizons. The approach for the prediction of time series of Spanish patents and trademarks applications (1979e2009) was based on the use of different techniques of time series prediction in a short-term horizon. The methods used can be grouped into two specifics areas: regression models of trends and time series models. The results of this study show that it is possible to model the series of patents and trademarks applications with different models, especially ARIMA, with satisfactory model adjustment and relatively low error.