The role of oxygen in the interaction of emeraldine base polyaniline with Cu(II) or Fe(III) ions in NMP solution

The influence of molecular oxygen in the interactions of emeraldine base form of polyaniline (EB-PANI) with Fe(III) or Cu(II) ions in 1-methyl-2-pyrrolidinone (NMP) solutions has been investigated by UV-vis-NIR, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies. Through the set of spectroscopic results it was possible to rationalize the role Of O(2) and to construct a scheme of preferential routes occurring in the interaction of EB-PANI with Fe(III) or Cu(II). Solutions of 4.0 mmol L(-1) EB-PANI with 0.8, 2.0 and 20 mmol L(-1) Fe(III) or Cu(II) ions in NMP were investigated and the main observed reactions were EB-PANI oxidation to pernigraniline (PB-PANI) and EB-PANI doping process by pseudo-protonation, or by a two-step redox process. In the presence Of O(2), PB-PANI is observed in all Fe(III)/EB solutions and EB-PANI doping only occurs in solutions with high Fe(III) concentrations through pseudo-protonation. On the other hand, emeraldine salt (ES-PANI) is formed in all Fe(III)/EB solutions under N(2) atmosphere and, in this case, doping occurs both by the pseudo-protonation and two-step redox mechanisms. In all Cu(II)/EB solutions PB-PANI is formed both in the presence and absence of O(2), and only for solutions with high Cu(II) concentrations doping process occurs in a very low degree. The most important result from EPR spectra was providing evidence for redox steps. The determined Cu(II) signal areas under oxygen are higher than under N(2) and, further. the initial metal proportions (1:2:20) are maintained in these spectra, indicating that Cu(I) formed are re-oxidized by O(2) and. so, Cu(II) ions are being recycled. Consistently, for the solutions prepared under nitrogen, the corresponding areas and proportions in the spectra are much lower, confirming that a partial reduction of Cu(II) ions actually occurs. (C) 2009 Elsevier B.V. All rights reserved.

Further studies on peptide synthesis at high temperature

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of perhydroazepine and piperidine as further ancillary ligands on Ru-PPh(3)-based catalysts for ROMP of norbornene and norbornadiene

Polynorbornadiene and polynorbornene were synthesized via ring opening metathesis polymerization (ROMP) with [RuCl(2)(PPh(3))(2)(amine)] as catalyst precursors, amine = piperidine (1) or perhydroazepine (2) in the presence of 5 mu L of ethyl diazoacetate (EDA) ([monomer]/[Ru] = 5000; 40 degrees C with 1; 25 degrees C with 2). The effects of the solvent volume (2-8 mL of CHCl(3)) reaction time (5-120 min) and atmosphere type (argon and air) on the yields were investigated to observe the behavior of the two different precursors. Quantitative yields were obtained for 60 or 120 min regardless of the starting volumes, either in argon or air, with both Ru species. However, low yields were obtained for short times (5-30 min) when the reactions are performed with large volumes (6-8 mL). In argon, the yields were larger with 2, associated to a faster propagation reaction controlled by the Ru active species. In air, the yields were larger with 1, associated to a higher resistance to O(2) of the starting and propagating Ru species. The different activities between 1 and 2 are discussed considering the steric hindrance and electronic characteristics of the amines such as ancillary ligands and their arrangements with PPh(3) and Cl(-) ions in the metal centers. (c) 2009 Elsevier B.V. All rights reserved.

Now What!?! Exploring the Next Steps for Large-scale Library Assessment Projects

This presentation was offered as part of the CUNY Library Assessment Conference, Reinventing Libraries: Reinventing Assessment, held at the City University of New York in June 2014.

Print quality study of newsprint : Further development of the laboratoryoffset press at PAPRO

A laboratory offset press has been developed over the last five years at PAPRO for testing print qualityon newsprint, as at present, there is no good way for the mills to test this issue. In this project a comparisonhas been made between a laboratory offset press and a commercial press to see if the laboratoryoffset press can be used as a reliable test method or if a further development is needed.To evaluate the method, similar papers have been printed in both presses and compared using imageanalysis techniques. All together eighteen samples were tested which is enough to give comparableresults. The print quality showed a high variation, the values from the laboratory offset press and thecommercial press were not following the same trends. At present time the laboratory offset press needsome further development before it can be used as a reliable test method for halftone prints. Even sosome conclusions were made.The newsprint that has been used came from Norske Skog Tasman Mill (Kawerau), since the otheraim of this project was to do a repeatability study of their three existing paper machines to distinguishpossible differences in the production. The paper samples were taken from each paper machine on sixdifferent dates to give a representative result. This also gave the opportunity to compare the machinesbetween themselves. Comparison between the machines shows that the wire side gives a better andmore even result than the topside on the prints from the laboratory offset press. According to the resultfrom the commercial press the wire side shows a higher degree of variability. Samples from papermachine 2 and 3 were less variable and had the lowest standard deviation of grey level for solid areas.This suggests that newsprints from PM 2 and PM 3 give a more even print quality with a better inkcoverage.

Attractive Work Process

Many companies both in Sweden and other parts of the world are since the beginning of the 21st century faceing a lack of work force (1,2,3). The ability to recruit and retain skilled employees is seen as one of the most important questions for the survival and development of the companies (4,5). Labour shortage is seen as the biggest obstacle for expansion for small enterprises in Sweden (5). There is a need for workplaces to be attractive, but how can the attractiveness be increased? Researchers at Högskolan Dalarna have during almost a decennium conducted research concerning attractive work. Based on a modell of qualities that contributes to make a work attractive (6) has a method aiming for raised attractiveness been developed for SME:s. All employees participate by answering a questionnaire about the importance of different qualities and to what degree they are fulfilled. Further discussions at the workplace on what to preserve and what to develop make the base for an action plan.Important experiences:• Discuss and establish the aim of the method with management and employees. • The company must be prepared to follow up and realize the action plan.• Agree about expectations – they must be realistic and practicable.• Reserve time to start the process and to end up in an action plan. • Avoid negative thinking and put problems away. • Take all the time small steps in the right direction.• Keep employees engaged and avoid the manager or process leader to take the command.• Use the strategy with small work groups; it gives better possibilities for participation and outspokenness.• Follow up studies are necessary to keep up the motivation.The most positive aspects of the method is its promoting perspective and that it engages all the employees.1.Rauhut, D. (2002). Arbetskraftsbrist och arbetskraftsinvandring: hot eller möjlighet för ekonomisk tillväxt? Östersund, ITPS, Institutet för tillväxtpolitiska studier.2.Funch, M. and C. Ehrnooth. (2008, 08-10-2008). Labour shortage despite financial crisis? Retrieved 2008-12-16, 2008, from www.norden.org/webb/news/news.asp?id=8113&lang=6. 3.Manpower (2008). Talent Shortage Survey 2008 Global Results: 10. 4.Bakker, A. B. and W. B. Schaufeli (2008). Positive organizational behavior: Engaged employees in flourishing organizations. Journal of Organizational Behavior 29: 147-154.5.Kennemar, J. and L. Jagrén (2008). Småföretagsbarometern. Stockholm, Swedbank Företagarna: 23.6.Åteg, M., A. Hedlund, et al. (2004). Attraktivt arbete. Från anställdas uttalanden till skapandet av en modell. Stockholm, Arbetslivsinstitutet.

Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

International conference site selection criteria : And a case study of Stockholm as an international conference city

The purpose of this thesis is to identify the destination site selection criteria for internationalconferences from the perspectives of the three main players of the conference industry,conference buyers (organizers and delegates) and suppliers. Additionally, the researchidentifies the strengths and weaknesses of the congress cities of Stockholm and Vienna.Through a comparison with Vienna, the top city for hosting international conferences, a roadmap for Stockholm has been designed, to strengthen its congress tourism opportunities, thus,obtaining a higher status as an international congress city. This qualitative research hascombined both primary and secondary data methods, through semi-standardized expertinterviews and secondary studies respectively, to fulfil the study’s aim. The data have beenanalysed by applying the techniques of qualitative content analysis; the secondary dataadopting an inductive approach according to Mayring (2003) while the expert interviewsusing a deductive approach according to Meuser & Nagel (2009). The conclusions of thesecondary data have been further compared and contrasted with the outcomes of the primarydata, to propose fresh discoveries, clarifications, and concepts related to the site selectioncriteria for international conferences, and for the congress tourism industry of Stockholm. Theresearch discusses the discoveries of the site selection criteria, the implications of thestrengths and weaknesses of Stockholm in comparison to Vienna, recommendations forStockholm via a road map, and future research areas in detail. The findings andrecommendation, not only provide specific steps and inceptions that Stockholm as aninternational conference city can apply, but also propose findings, which can aid conferencebuyers and suppliers to cooperate, to strengthen their marketing strategies and developsuccessful international conferences and destinations to help achieve a greater competitiveadvantage.

Att tillämpa återkommande mätning av kundnöjdhet i IT-projekt : En vidareutvecklad modell baserad på modellerna American Customer Satisfaction Index (ACSI) och SERVQUAL

I dagens samhälle är det allt viktigare för företag att behålla sina existerande kunder då konkurrensen blir allt hårdare. Detta medför att företag försöker vidta åtgärder för att vårda relationer med sina kunder. Detta problem är även högst relevant inom IT-branschen. Inom IT-branschen är det vanligt att arbeta agilt i IT-projekt. Vår samarbetspartner har sett ett ökat behov av att mäta servicekvalitet på ett återkommande sätt inom IT-projekt, detta för att mäta relevanta variabler som sträcker sig utanför kravspecifikationen. För att mäta framgång gällande detta arbetssätt vill man kunna mäta Nöjd Kund Index (NKI) för att kunna jämföra IT-projekt internt i företaget. Då tidigare forskning visat avsaknad av modeller innehållande både mätning av servicekvalitet samt NKI har lämplig litteratur studerats där det framkommit att modellen SERVQUAL är vedertagen för mätning av servicekvalitet och modellen American Customer Satisfaction Index (ACSI) är vedertagen för mätning av NKI. Detta har legat till grund för arbetets problemformulering och syfte. Syftet med arbetet är att skapa en vidareutvecklad modell för mätning av NKI för att jämföra IT-projekt internt samt återkommande mätning av servicekvalitet inom IT-projekt. Framtagande av denna modell har sedan skett genom forskningsstrategin Design and Creation. Intervjuer har genomförts för kravfångst till den vidareutvecklade modellen. Resultatet av denna forskningsstrategi blev sedan en vidareutvecklad modell baserad på ovan nämnda modeller med återkommande förhållningssätt för mätning av servicekvalitet inom IT-projekt och mätning av NKI för att jämföra IT-projekt internt i företaget. Den framtagna modellen har sedan verifierats genom ytterligare intervjuer med respondenter som innehar god erfarenhet från kundsidan av IT-projekt. Från dessa intervjuer kunde sedan slutsats dras att denna modell är att anse som applicerbar i empirin gällande IT-projekt.

Improving continence services for older people from the service-providers’ perspective : a qualitative interview study

Objective: To examine in depth the views and experiences of continence service leads in England on key service and continence management characteristics in order to identify and to improve our understanding of barriers to a good-quality service and potential facilitators to develop and to improve services for older people with urinary incontinence (UI). Design: Qualitative semistructured interviews using a purposive sample recruited across 16 continence services. Setting: 3 acute and 13 primary care National Health Service Trusts in England. Participants: 16 continence service leads in England actively treating and managing older people with UI. Results: In terms of barriers to a good-quality service, participants highlighted a failure on the part of commissioners, managers and other health professionals in recognising the problem of UI and in acknowledging the importance of continence for older people and prevalent negative attitudes towards continence and older people. Patient assessment and continence promotion regardless of age, rather than pad provision, were identified as important steps for a good-quality service for older people with UI. More rapid and appropriate patient referral pathways, investment in service capacity, for example, more trained staff and strengthened interservice collaborations and a higher profile within medical and nurse training were specified as being important facilitators for delivering an equitable and highquality continence service. There is a need, however, to consider the accounts given by our participants as perhaps serving the interests of their professional group within the context of interprofessional work. Conclusions: Our data point to important barriers and facilitators of a good-quality service for older people with UI, from the perspective of continence service leads. Further research should address the views of other stakeholders, and explore options for the empirical evaluation of the effectiveness of identified service facilitators.

Att lämna en värld : Om utgångsprocesser ur Jehovas vittnen

It is an everyday experience to realize that things do not turn out the as expected. But what if you realize that everything you have so far experienced as reality is illusion? This article is about former members of the Jehovah’s Witnesses who have had doubts about what they previously believed to be the Truth. The article also treats the exit process, from being a Jehovah’s Witness to becoming an ex-Jehovah’s Witness. The data consists of twenty qualitative interviews with ten Jehovah’s Witnesses and twenty qualitative interviews with ten former Jehovah’s Witnesses. The data also include a diary written during four years preceding an exit from the organization. The analysis was made through thematic concentration. Ontologically the analysis and the article are based on a constructionist view though it is mainly empirical with no further theoretical assessment. However, to be able to understand the results a contextual frame is sketched with two factors affecting members who make an exit. First there are tying factors that bind the person closer to the organization; these are closeness and friendship and confirmation. A secluding factor is something that secludes the member from the outside society; these factors are the work situation and »closed doors«. With high values on these factors the exit process will be more arduous. The results are presented through a process model in which different phases or steps in the exit process are described. The following steps in the process are: (1) different levels of doubts; (2) trying out doubts; (3) turning points; (4) different decisions; (5) different steps in execution; (6) floating; (7) relative neutrality. The process is defined as an altogether ambivalent and emotionally tough experience, but other parts of life may be affected as well, such as employment, social life, family life and career.

How does data quality in a network affect heuristic solutions?

To have good data quality with high complexity is often seen to be important. Intuition says that the higher accuracy and complexity the data have the better the analytic solutions becomes if it is possible to handle the increasing computing time. However, for most of the practical computational problems, high complexity data means that computational times become too long or that heuristics used to solve the problem have difficulties to reach good solutions. This is even further stressed when the size of the combinatorial problem increases. Consequently, we often need a simplified data to deal with complex combinatorial problems. In this study we stress the question of how the complexity and accuracy in a network affect the quality of the heuristic solutions for different sizes of the combinatorial problem. We evaluate this question by applying the commonly used p-median model, which is used to find optimal locations in a network of p supply points that serve n demand points. To evaluate this, we vary both the accuracy (the number of nodes) of the network and the size of the combinatorial problem (p). The investigation is conducted by the means of a case study in a region in Sweden with an asymmetrically distributed population (15,000 weighted demand points), Dalecarlia. To locate 5 to 50 supply points we use the national transport administrations official road network (NVDB). The road network consists of 1.5 million nodes. To find the optimal location we start with 500 candidate nodes in the network and increase the number of candidate nodes in steps up to 67,000 (which is aggregated from the 1.5 million nodes). To find the optimal solution we use a simulated annealing algorithm with adaptive tuning of the temperature. The results show that there is a limited improvement in the optimal solutions when the accuracy in the road network increase and the combinatorial problem (low p) is simple. When the combinatorial problem is complex (large p) the improvements of increasing the accuracy in the road network are much larger. The results also show that choice of the best accuracy of the network depends on the complexity of the combinatorial (varying p) problem.

Barnmorskans uppfattning om indikationer och effekter av förlossning med elektiva kejsarsnitt på humanitär indikation utifrån arbetslivserfarenhet : En intervjustudie

Bakgrund: Statistik visar på ökat antal elektiva kejsarsnitt internationellt och nationellt. Ett kejsarsnitt kan rädda liv på mor och barn om komplikationer uppstår, elektivt kejsarsnitt är även liksom andra stora operationer förenat med risker för komplikationer. Antalet elektiva kejsarsnitt på humanitär indikation har ökat i Sverige och cirka 17 % av alla förlossningar sker via kejsarsnitt. Att vårda och stödja kvinnor före, under och efter en förlossning med kejsarsnitt hör till barnmorskans arbete. Syftet med studien var att beskriva barnmorskors uppfattning om indikationer och effekter av förlossning med elektiva kejsarsnitt på humanitär indikation belyst utifrån arbetslivserfarenheter. Metod: kvalitativ metod: semistrukturella intervjuer med nio barnmorskor. Materialet analyserades via fenomenografisk analys i sju steg. Resultat: Fyra beskrivningskategorier framkom, Elektivt kejsarsnitt på humanitär indikation är ett etiskt dilemma, Elektivt kejsarsnitt på humanitär indikation är en stor operation, Elektivt kejsarsnitt på humanitär indikation påverkar organisation och barnmorskans arbetsmiljö och Elektivt kejsarsnitt på humanitär indikation påverkar kvinnans förlossningsupplevelse. Vidare framkom nio kategorier som beskriver barnmorskors uppfattningar. Slutsats Barnmorskor uppfattar elektiva kejsarsnitt som något komplext, att de med sina yrkeskunskaper värnar det naturliga vid kejsarsnitt på humanitär indikation och att de har brist på mandat att stödja och stärka kvinnors informerade val om elektivt kejsarsnitt på humanitär indikation. Klinisk tillämpbarhet: Resultatet kan användas vid undervisning kring barnmorskans stödjande och vårdande arbete i samband med förlossning via kejsarsnitt. Vidare kan resultatet vara underlag till diskussioner inom mödrahälsovård och förlossning i syfte att ge barnmorskor stärkt mandat till sina stödjande och informativa uppgifter.

Normative-informational positions: a modal-logical approach

This paper is a preliminary investigation into the application of the formal-logical theory of normative positions to the characterisation of normative-informational positions, pertaining to rules that are meant to regulate the supply of information. First, we present the proposed framework. Next, we identify the kinds of nuances and distinctions that can be articulated in such a logical framework. Finally, we show how such nuances can arise in specific regulations. Reference is made to Data Protection Law and Contract Law, among others. The proposed approach is articulated around two essential steps. The first involves identifying the set of possible interpretations that can be given to a particular norm. This is done by using formal methods. The second involves picking out one of these interpretations as the most likely one. This second step can be resolved only by using further information (e.g., the context or other parts of the regulation).

Connecting Scientific Data to Scientific Experiments with Provenance

As scientific workflows and the data they operate on, grow in size and complexity, the task of defining how those workflows should execute (which resources to use, where the resources must be in readiness for processing etc.) becomes proportionally more difficult. While "workflow compilers", such as Pegasus, reduce this burden, a further problem arises: since specifying details of execution is now automatic, a workflow's results are harder to interpret, as they are partly due to specifics of execution. By automating steps between the experiment design and its results, we lose the connection between them, hindering interpretation of results. To reconnect the scientific data with the original experiment, we argue that scientists should have access to the full provenance of their data, including not only parameters, inputs and intermediary data, but also the abstract experiment, refined into a concrete execution by the "workflow compiler". In this paper, we describe preliminary work on adapting Pegasus to capture the process of workflow refinement in the PASOA provenance system.