Capillary siphons and their application in the fuel delivery system of direct methanol fuel cells

The objective of the work is to develop a fuel delivery system for potable direct methanol fuel cell. Currently, one of the most fundamental limitations of direct methanol fuel cells is that the fuel supplied to the anode of the DMFC must be a very dilute aqueous methanol solution (usually 0.5∼1.5 M). If a DMFC is filled with a dilute aqueous methanol solution, the fuel cell operation time per refuel would be very short, which would considerably diminish the advantage of a DMFC over a conventional battery. To overcome this difficulty, a complex fuel delivery system based on the modern micro system technology was proposed by the author. The proposed fuel delivery system would include micro-pumps, a methanol sensor, and a control unit. The fuel delivery system adds considerable costs to the fuel cell system and consume considerable amount of electricity from the fuel cell, which in turn significantly reduces the net power output of the fuel cell. As a result, the DMFC would have tremendous difficulty to compete with the conventional battery technology in terms of costs and power output. ^ This work presents a novel passive fuel delivery system for direct methanol fuel cells. In this particular system, a methanol fuel and an aqueous methanol solution are stored separately in two containers and a wick is disposed between the two containers in a siphon fashion, with the container of the aqueous methanol solution communicating with the anode of the DMFC. Methanol is siphoned from the methanol container to the aqueous solution container in-situ when the methanol in the aqueous methanol solution is consumed during the operation of the fuel cell. Through a proper selection of the wick and the containers, the methanol concentration near the anode of the DMFC could be maintained within a preferable range. ^

Computational modeling of intermediate temperature proton exchange membrane (PEM) fuel cells

A two-phase three-dimensional computational model of an intermediate temperature (120--190°C) proton exchange membrane (PEM) fuel cell is presented. This represents the first attempt to model PEM fuel cells employing intermediate temperature membranes, in this case, phosphoric acid doped polybenzimidazole (PBI). To date, mathematical modeling of PEM fuel cells has been restricted to low temperature operation, especially to those employing Nafion ® membranes; while research on PBI as an intermediate temperature membrane has been solely at the experimental level. This work is an advancement in the state of the art of both these fields of research. With a growing trend toward higher temperature operation of PEM fuel cells, mathematical modeling of such systems is necessary to help hasten the development of the technology and highlight areas where research should be focused.^ This mathematical model accounted for all the major transport and polarization processes occurring inside the fuel cell, including the two phase phenomenon of gas dissolution in the polymer electrolyte. Results were presented for polarization performance, flux distributions, concentration variations in both the gaseous and aqueous phases, and temperature variations for various heat management strategies. The model predictions matched well with published experimental data, and were self-consistent.^ The major finding of this research was that, due to the transport limitations imposed by the use of phosphoric acid as a doping agent, namely low solubility and diffusivity of dissolved gases and anion adsorption onto catalyst sites, the catalyst utilization is very low (∼1--2%). Significant cost savings were predicted with the use of advanced catalyst deposition techniques that would greatly reduce the eventual thickness of the catalyst layer, and subsequently improve catalyst utilization. The model also predicted that an increase in power output in the order of 50% is expected if alternative doping agents to phosphoric acid can be found, which afford better transport properties of dissolved gases, reduced anion adsorption onto catalyst sites, and which maintain stability and conductive properties at elevated temperatures.^

New fuel cells system for portable application with low temperature cofired ceramic (LTCC) technology

Miniature direct methanol fuel cells (DMFCs) are promising micro power sources for portable appliction. Low temperature cofired ceramic (LTCC), a competitive technology for current MEMS based fabrication, provides cost-effective mass manufacturing route for miniature DMFCs. Porous silver tape is adapted as electrodes to replace the traditional porous carbon electrodes due to its compatibility to LTCC processing and other electrochemical advantages. Electrochemical evaluation of silver under DMFCs operating conditions demonstrated that silver is a good electrode for DMFCs because of its reasonable corrosion resistance, low passivating current, and enhanced catalytic effect. Two catalyst loading methods (cofiring and postfiring) of the platinum and ruthenium catalysts are evaluated for LTCC based processing. The electrochemical analysis exhibits that the cofired path out-performs the postfiring path both at the anode and cathode. The reason is the formation of high surface area precipitated whiskers. Self-constraint sintering is utilized to overcome the difficulties of the large difference of coefficient of thermal expansion (CTE) between silver and LTCC (Dupont 951) tape during cofiring. The graphite sheet employed as a cavity fugitive insert guarantees cavity dimension conservation. Finally, performance of the membrane electrode assembly (MEA) with the porous silver electrode in the regular graphite electrode based cell and the integrated cofired cell is measured under passive fuel feeding condition. The MEA of the regular cell performs better as the electrode porosity and temperature increased. The power density of 10 mWcm-2 was obtained at ambient conditions with 1M methanol and it increased to 16 mWcm -2 at 50°C from an open circuit voltage of 0.58V. For the integrated prototype cell, the best performance, which depends on the balance methanol crossover and mass transfer at different temperatures and methanol concentrations, reaches 1.13 mWcm-2 at 2M methanol solution at ambient pressure. The porous media pore structure increases the methanol crossover resistance. As temperature increased to 60°C, the device increases to 2.14 mWcm-2.

Are marginalized women being left behind? A population-based study of institutional deliveries in Karnataka, India

Background While India has made significant progress in reducing maternal mortality, attaining further declines will require increased skilled birth attendance and institutional delivery among marginalized and difficult to reach populations. Methods A population-based survey was carried out among 16 randomly selected rural villages in rural Mysore District in Karnataka, India between August and September 2008. All households in selected villages were enumerated and women with children 6 years of age or younger underwent an interviewer-administered questionnaire on antenatal care and institutional delivery. Results Institutional deliveries in rural areas of Mysore District increased from 51% to 70% between 2002 and 2008. While increasing numbers of women were accessing antenatal care and delivering in hospitals, large disparities were found in uptake of these services among different castes. Mothers belonging to general castes were almost twice as likely to have an institutional birth as compared to scheduled castes and tribes. Mothers belonging to other backward caste or general castes had 1.8 times higher odds (95% CI: 1.21, 2.89) of having an institutional delivery as compared to scheduled castes and tribes. In multivariable analysis, which adjusted for inter- and intra-village variance, Below Poverty Line status, caste, and receiving antenatal care were all associated with institutional delivery. Conclusion The results of the study suggest that while the Indian Government has made significant progress in increasing antenatal care and institutional deliveries among rural populations, further success in lowering maternal mortality will likely hinge on the success of NRHM programs focused on serving marginalized groups. Health interventions which target SC/ST may also have to address both perceived and actual stigma and discrimination, in addition to providing needed services. Strategies for overcoming these barriers may include sensitization of healthcare workers, targeted health education and outreach, and culturally appropriate community-level interventions. Addressing the needs of these communities will be critical to achieving Millennium Development Goal Five by 2015.

Use of active power filter to reduce the effects of harmonics in solid oxide fuel cells

The Solid Oxide Fuel Cell (SOFC) is a class of fuel cells that is capable of generating very high levels of power at high temperatures. SOFCs are used for stationary power generation and as Combined Heat and Power (CHP) systems. In spite of all the beneficial features of the SOFC, the propagation of ripple currents, due to nonlinear loads, is a challenging problem, as it interferes with the physical operation of the fuel cell. The purpose of this thesis is to identify the cause of ripples and attempt to eliminate or reduce the ripple propagation through the use of Active Power Filters (APF). To this end, a systematic approach to modeling the fuel cell to account for its nonlinear behavior in the presence of current ripples is presented. A model of a small fuel cell power system which consists of a fuel cell, a DC-DC converter, a single-phase inverter and a nonlinear load is developed in MATLAB/Simulink environment. The extent of ripple propagation, due to variations in load magnitude and frequency, are identified using frequency spectrum analysis. In order to reduce the effects of ripple propagation, an APF is modeled to remove ripples from the DC fuel cell current. The emphasis of this thesis is based on the idea that small fuel cell systems cannot implement large passive filters to cancel the effects of ripple propagation and hence, the compact APF topology effectively protects the fuel cell from propagating ripples and improves its electrical performance.

Pricing Automobile Fuel Economy : A New Hedonic Approach

Publisher PDF

Fuel poverty in the UK : Is there a difference between rural and urban areas?

Date of Acceptance: 28/08/2015 Deborah Roberts acknowledges the support of funding from the Scottish Government’s Rural and Environment Science and Analytical Services Division (RESAS). We would like to thank the reviewers and editor for their valuable comments. All usual caveat apply.

Fuel poverty in the UK : Is there a difference between rural and urban areas?

Date of Acceptance: 28/08/2015 Deborah Roberts acknowledges the support of funding from the Scottish Government’s Rural and Environment Science and Analytical Services Division (RESAS). We would like to thank the reviewers and editor for their valuable comments. All usual caveat apply.

Evaluating New Policy Instruments of the Corporate Average Fuel Economy Standards : Footprints, Credit Transferring and Credit Trading

Publisher PDF

Evaluating New Policy Instruments of the Corporate Average Fuel Economy Standards : Footprints, Credit Transferring and Credit Trading

Publisher PDF

Fast pyrolysis oil fuel blend for marine vessels

The main driver for the investigation of fast pyrolysis oil marine fuel blends is EU directive 2012/33/EU which aims to cut the sulphur content of marine fuel and thereby reduce air pollution caused by marine vessels. The aim of this study was to investigate the miscibility of 3- and 4- component blends containing pyrolysis oil, 1-butanol, biodiesel (RME) and/or marine gas oil (MGO). The ideal blend would be a stable homogenous product with a minimum amount of butanol, whilst maximising the amount of pyrolysis oil. A successful blend would have properties suitable for use in marine engines. In order to successfully utilise a marine fuel blend in commercial vessels it should meet minimum specification requirements such as a flash point ≥60°C. Blends of pyrolysis oil, RME, MGO and 1-butanol were evaluated and characterised. The mixed blends were inspected after 48 hours for homogeneity and the results plotted on a tri-plot phase diagram. Homogenous samples were tested for water content, pH, acid number, viscosity and flash point as these give indicate a blend’s suitability for engine testing. The work forms part of the ReShip Project which is funded by Norwegian industry partners and the Research Council of Norway (The ENERGIX programme).

Zinc regeneration in rechargeable zinc-air fuel cells:a review

Zinc-air fuel cells (ZAFCs) present a promising energy source with a competing potential with the lithium-ion battery and even with proton-exchange membrane fuel cells (PEMFCs) for applications in next generation electrified transport and energy storage. The regeneration of zinc is essential for developing the next-generation, i.e., electrochemically rechargeable ZAFCs. This review aims to provide a comprehensive view on both theoretical and industrial platforms already built hitherto, with focus on electrode materials, electrode and electrolyte additives, solution chemistry, zinc deposition reaction mechanisms and kinetics, and electrochemical zinc regeneration systems. The related technological challenges and their possible solutions are described and discussed. A summary of important R&D patents published within the recent 10 years is also presented.

Impact of protected forests on rural household fuel tree planting and deforestation: Chiro District, Ethiopia

This study aims at exploring the potential impact of forest protection intervention on rural households’ private fuel tree planting in Chiro district of eastern Ethiopia. The study results revealed a robust and significant positive impact of the intervention on farmers’ decisions to produce private household energy by growing fuel trees on their farm. As participation in private fuel tree planting is not random, the study confronts a methodological issue in investigating the causal effect of forest protection intervention on rural farm households’ private fuel tree planting through non-parametric propensity score matching (PSM) method. The protection intervention on average has increased fuel tree planting by 503 (580.6%) compared to open access areas and indirectly contributed to slowing down the loss of biodiversity in the area. Land cover/use is a dynamic phenomenon that changes with time and space due to anthropogenic pressure and development. Forest cover and land use changes in Chiro District, Ethiopia over a period of 40 years was studied using remotely sensed data. Multi temporal satellite data of Landsat was used to map and monitor forest cover and land use changes occurred during three point of time of 1972,1986 and 2012. A pixel base supervised image classification was used to map land use land cover classes for maps of both time set. The result of change detection analysis revealed that the area has shown a remarkable land cover/land use changes in general and forest cover change in particular. Specifically, the dense forest cover land declined from 235 ha in 1972 to 51 ha in 1986. However, government interventions in forest protection in 1989 have slowed down the drastic change of dense forest cover loss around the protected area through reclaiming 1,300 hectares of deforested land through reforestation program up to 2012.