Proposição e aplicação de um core set da classificação internacional de funcionalidade, incapacidade e saúde (CIF) para saúde física de idosos

Para aumentar a viabilidade do uso da Classificação Internacional de Funcionalidade, Incapacidade e Saúde (CIF), core sets começaram a ser desenvolvidos, e objetivam estabelecer uma seleção de categorias adaptada para representar os padrões de avaliação multiprofissional de grupos específicos de pacientes. Com o objetivo de propor um core set da CIF para classificar a saúde física de idosos, formou-se uma comissão de especialistas para julgar o instrumento por meio da técnica Delphi, o que mostra a interface multidisciplinar do projeto. Finalizada a participação da comissão, o core set foi proposto contendo 30 categorias. Após aplicação em uma amostra com 340 idosos dos municípios de Natal/RN e Santa Cruz/RN, o core set foi submetido à análise fatorial, tendo ficado com 19 categorias. A análise ainda proporcionou gerar uma pontuação para cada idoso por meio do escore fatorial, tendo provado ser uma forma fidedigna e confiável de se pontuar um core set.

Desenvolvimento de pastas cimentantes contendo nanossílica como material estendedor para aplicação em fases iniciais, de poços petrolíferos, submetidas à baixa temperatura (5°c ± 3ºc)

The improved performance of hydraulic binders, the base of Portland cement, consists in the careful selection and application of materials that promote greater durability and reduced maintenance costs There is a wide variety of chemical additives used in Portland cement slurries for cementing oil wells. These are designed to work in temperatures below 0 ° C (frozen areas of land) to 300 ° C (thermal recovery wells and geothermal); pressure ranges near ambient pressure (in shallow wells) to greater than 200 MPa (in deep wells). Thus, additives make possible the adaptation of the cement slurries for application under various conditions. Among the materials used in Portland cement slurry, for oil wells, the materials with nanometer scale have been applied with good results. The nanossílica, formed by a dispersion of SiO2 particles, in the nanometer scale, when used in cement systems improves the plastic characteristics and mechanical properties of the hardened material. This dispersion is used commercially as filler material, modifier of rheological properties and / or in recovery processes construction. It is also used in many product formulations such as paints, plastics, synthetic rubbers, adhesives, sealants and insulating materials Based on the above, this study aims to evaluate the performance of nanossílica as extender additive and improver of the performance of cement slurries subjected to low temperatures (5 ° C ± 3 ° C) for application to early stages of marine oil wells. Cement slurries were formulated, with densities 11.0;12.0 and 13.0 ppg, and concentrations of 0; 0.5, 1.0 and 1.5%. The cement slurries were subjected to cold temperatures (5 ° C ± 3 ° C), and its evaluation performed by tests rheological stability, free water and compressive strength in accordance with the procedures set by API SPEC 10A. Thermal characterization tests (TG / DTA) and crystallographic (XRD) were also performed. The use of nanossílica promoted reduction of 30% of the volume of free water and increased compression resistance value of 54.2% with respect to the default cement slurry. Therefore, nanossílica presented as a promising material for use in cement slurries used in the early stages of low-temperature oil wells

Açude do cais: uma proposta de aplicação de uma sequência de atividades didáticas em um contexto real

Currently it is expected that science education will enable a more comprehensive conception of the world and of the relationship between scientific knowledge, technology and society. Thus, we seek the science teaching attend around contexts related to science, technology and society (STS). According CTS approaches, the science education should promote learning in the scientific, technological and social fields, from experienced real contexts, generating motivation to students, offering them tools to work as scientifically literate citizens. For this, it becomes crucial to resort to innovative activities and the various methodologies and appropriate teaching materials, and there is a lack of this perspective in general basic education, which drives the practice of an STS approach. Therefore, the aim of this research is the production of an instructional sequence for the exploration of the theme: "The quality of the water in the municipality of Cuité-PB," according to focus CTS in the 2nd year of high school. The choice of this topic is due to the problem caused by the quality of water in this municipality, with the concern to address an issue that came to work the critical / reflective understanding of a real context, in order to sensitize students to the importance of scientific / technological knowledge. The selection criteria of STS subjects were also observed. In this research the materials were produced and applied by the teacher / researcher. For data collection we used the observation and analysis of student records. The results were encouraging in the sense of participation, motivation and skill acquisition. This research contributes to the teaching of science with a focus STS, as well as encourage the use of perspective in new contexts with real questioning

Estudo da incorporação de resíduos de perfuração para aplicação em cimentação de poços de petróleo

During the drilling of oil and natural gas are generated solid waste, liquid and gaseous. These solid fragments, which are known as cuttings, are carried to the surface through the drilling fluid. Furthermore, this fluid serves to cool the bit, keeping the internal pressure of the well, and others. This solid residue is very polluting, because it has incorporated beyond the drilling fluid, which has several chemical additives harmful to the environment, some heavy metals that are harmful to the environment, such as lead. To minimize the residue generated, are currently being studied numerous techniques to mitigate the problems that such waste can cause to the environment, like addition of cuttings in the composition of soil cement brick masonry construction, addition of cuttings on the clay matrix for the manufacture of solid masonry bricks and ceramic blocks and coprocessing of the cuttings in cement. So, the main objective of this work is the incorporation of cuttings drilling of oil wells, the cement slurry used in the cementing operation of the well. This cuttings used in this study, arising from the formation Pendências, was milled and separated in a sieve of 100 mesh. After grinding had a mean particle sike in order of 86 mm and crystal structure containing phases of quartz and calcite type, characteristic of the Portland cement. Were formulated and prepared slurries of cement with density 13 lb / gal, containing different concentrations of gravel, and realized characterization tests API SPEC 10A and RP 10B. Free water tests showed values lower than 5.9% and the rheological model that best described the behavior of the mixtures was the power. The results of compressive strength (10.3 MPa) and stability (Dr <0.5 lb / gal) had values within the set of operational procedures. Thus, the gravel from the drilling operation, may be used as binders in addition to Portland cement oil wells, in order to reuse this waste and reduce the cost of the cement paste.

Novos adsorventes para aplicação na remoção de enxofre de combustíveis

Currently the market requires increasingly pure oil derivatives and, with that, comes the need for new methods for obtaining those products that are more efficient and economically viable. Considering the removal of sulfur from diesel, most refineries uses catalytic hydrogenation process, the hydrodesulfurization. These processes needs high energy content and high cost of production and has low efficiency in removing sulfur at low concentrations (below 500 ppm). The adsorption presents itself as an efficient and economically viable alternative in relation to the techniques currently used. With that, the main purpose of this work is to develop and optimize the obtaining of new adsorbents based on diatomite, modified with two non ionic surfactants microemulsions, adding efficiency to the material, to its application on removal of sulfur present in commercial diesel. Analyses were undertaken of scanning electron microscopy (SEM), x-ray diffraction (XRD), x-ray fluorescence (XRF), thermogravimetry (TG) and N2 adsorption (BET) for characterization of new materials obtained. The variables used for diatomite modification were: microemulsion points for each surfactant (RNX 95 and UNTL 90), microemulsion aqueous phase through the use or non-use of salts (CaCl2 and BaCl2), the contact time during the modification and the contact form. The study of adsorption capacity of materials obtained was performed using a statistical modeling to evaluate the influence of salt concentration in the aqueous phase (20 ppm to 1500 ppm), finite bath temperature (25 to 60° C) and the concentration of sulphur in diesel. It was observed that the temperature and the concentration of sulphur (300 to 1100 ppm) were the most significant parameters, in which increasing their values increase the ability of modified clay to adsorb the sulphur in diesel fuel. Adsorption capacity increased from 0.43 to mg/g 1.34 mg/g with microemulsion point optimization and with the addition of salts.

Avaliando as escolas pelas suas competências: aplicação do DEA não discricionário para o ensino fundamental do Rio Grande do Norte

Formal education, understood by the gradual process that occurs at school, aims at learning and systematic knowledge is of great interest to society as it benefits its individuals and leads to many positive effects, such as increased productivity and welfare (Johnes, Johnes, 2007). Understanding what influences the educational outcome is as important as the result itself, because lets you manage these variables in order to obtain a better student performance. This work uses the data envelopment analysis (DEA) to compare the efficiency of Rio Grande do Norte schools. In this nonparametric method, an efficiency frontier was construct from the best schools that use the inputs set to generate educational products. Therefore, the data used were obtain by Test Brazil and year 2011 School Census to state and municipal schools of Rio Grande do Norte. Some of the variables considered as inputs and outputs have been obtain directly these bases - the other two were prepared, using the Item Response Theory (IRT) - they are the socioeconomic and school infrastructure indices. As a first step, we compared several DEA models, with changes of input variables. Then was chose the non-discretionary model for which was deep the analysis of results. The results showed that only seven schools were efficient in the 5th and 9th grades simultaneously; there were no significant differences between the efficiency of municipal and state schools; and there were no differences between large and small schools. Analyzing the municipalities, Mossoró excelled in both years with the highest proportion of efficient schools. Finally, the study suggests that using the projections provided by the DEA method, the most inefficient schools would be able to achieve the goal IDEB in 2011, in other words, it is possible to improve the education of significant state taking the efficient schools as a basis for too much.

Aplicação de géis de goma guar no processo de clarificação de salmouras e águas produzidas

Produced water is considered the main effluent of the oil industry, due to their increased volume in mature fields and its varied composition. The oil and grease content (TOG) is the main parameter for the final disposal of produced water. In this context, it is of great significance to develop an alternative method based on guar gum gel for the treatment of synthetic produced water, and using as the differential a polymer having high hydrophilicity for clarifying waters contaminated with oil. Thus, this study aims to evaluate the efficiency of guar gum gels in the remotion of oil from produced water. Guar gum is a natural polymer that, under specific conditions, forms three-dimensional structures, with important physical and chemical properties. By crosslinking the polymer chains by borate ions in the presence of salts, the effect salting out occurs, reducing the solubility of the polymer gel in water. As a result, there is phase separation with the oil trapped in the collapsed gel. The TOG was quantified from the spectroscopy in the ultraviolet and visible region. The system was proven to be highly efficient in the removal of dispersed oil from water produced synthetically, reaching removal percentages above 90%.

Aplicação da democracia deliberativa como mecanismo de efetivação do direito fundamental a uma administração pública proba

This study aims to analyze citizen participation in state policy decisions, as an essential element of legitimacy in the branches of government, especially in the sphere of the Executive, in the context of deliberative democracy. But, this study still has the desideratum to understand the citizen's role in public life, especially in the sphere of the Executive Branch, in order to effect the Fundamental Right to Public Administration proba, efficient and honest. Thus, to achieve this mister, the proposal is to expose the pesamento the classic contractualist, Thomas Hobbes, John Locke and Rousseau about the legitimacy of governments, through the statutes, and the question of the general will and majority rule as well how to present the comments of Thomas Jefferson on popular sovereignty and dialogical citizen participation in matters of local interest. After, it will be studied the theories of Fundamental Rights in order to demonstrate the need for the Civil Service should be veiled in a more specific custody rights, given the deep crisis in the Public Administrative practice due, especially, corruption. On the other side, the fundamentality of management also covers the aspect of the development of cities, which decisively affects the development of man, which, to join a deliberative governance program needs to be politicized, adopting full participation, dialogue, as duty citizen. Furthermore, taking as most heart, will be presented the doctrine of Jürgen Habermas, whose Discourse Theory element is to be followed for the implementation of a This study aims to analyze citizen participation in state policy decisions, as an essential element of legitimacy in the branches of the government, especially in the sphere of the Executive, in the context of deliberative democracy. But, this study also has the desideratum to understand the citizen's role in public life, especially in the sphere of the Executive Branch, in order to actualize the Fundamental Right to a just, efficient and honest Public Administration. Thus, to achieve this necessity, the proposal is to expose the thought of the classic contractualist thinkers, Thomas Hobbes, John Locke and Rousseau about the legitimacy of governments, through the statutes, and the question of the general will and majority rule as well as how to present the comments of Thomas Jefferson on popular sovereignty and dialogical citizen participation in matters of local interest. Later on, the theories of Fundamental Rights will be studied in order to demonstrate that the need for the Civil Service should be veiled in a more specific right custody, given the deep crisis in the Public Administrative practice due to, especially, the corruption. On the other hand, the fundamentality of management also covers the aspect of the development of cities, which decisively affects the development of man, who, to join a deliberative governance program, needs to be politicized, adopting full participation and dialogue as a citizen responsibility. Furthermore, taking as the major heart, it will be presented the doctrine of Jürgen Habermas whose Discourse Theory element is to be followed for the implementation of a broad deliberative and emancipatory democracy, with effective citizen participation. It will also be considered the Condorcet Constitution Project as a comparative link in the linking of the public deliberative will, and the Central Power, in the face of the Theory of “Sluice” Habermas. The proposal, based on communicative action, must allow a continuous flux and influx process of social interests towards the exercise of administrative power. The dialogical deal, brought to the center of the decisions, will allow discussions in the public scope, and may contribute to the legitimacy of government actions, inasmuch as it creates the feeling of politicization demanded by the man in a democratic state.

Aplicação da oxidação eletroquímica no tratamento de efluentes contendo corantes reativos utilizando Ti/Pt e Ti/Pt-SnSb

The textile effluents are a complex mixture of many pollutants that contain high organic loads, severe color and toxic compounds. The high concentration of the textile effluent may cause increased chemical demand (COD) and biochemical (BOD) of oxygen, elevated temperature, acidity or alkalinity, causing damage and environmental problems. In addition to representing a serious threat to human health such effluent is also quite toxic to most aquatic organisms. And for this reason, one must meet the concentration limits for emission sources and sewage system. This study aimed to investigate the performance of electrochemical treatment of a textile effluent for the removal of color, turbidity, dissolved oxygen (DO) and dissolved organic matter by investigating the influence of experimental parameters such as the electrocatalyst materials (Ti/Pt and Ti/Pt-SnSb) and current density in order to compare their efficiency, energy consumption and cost. The dye Novacron Blue CD (NB) was employed in synthetic solution, while the dyes Remazol Yellow 3RS (RY 3RS) Remazol Red RR Gran (RR-RR Gran) and Navy Blue CL-R (NB CL-R) were used to generate simulated textile effluent laboratory. The results showed that the application of electrochemical oxidation process favors the elimination of color effectively independent the electrocatalytic material and current used, as well as treated effluent. However, the influence of electrocatalytic material was crucial to reduction of the organic matter in all cases.

Análise de confiabilidade de um moto-ventilador centrífugo: aplicação no sistema de pressurização de subestação industrial para garantia da segurança operacional na indústria petroquímica

The need of the oil industry to ensure the safety of the facilities, employees and the environment, not to mention the search for maximum efficiency of its facilities, makes it seeks to achieve a high level of excellence in all stages of its production processes in order to obtain the required quality of the final product. Know the reliability of equipment and what it stands for a system is of fundamental importance for ensuring the operational safety. The reliability analysis technique has been increasingly applied in the oil industry as fault prediction tool and undesirable events that can affect business continuity. It is an applied scientific methodology that involves knowledge in engineering and statistics to meet and or analyze the performance of components, equipment and systems in order to ensure that they perform their function without fail, for a period of time and under a specific condition. The results of reliability analyzes help in making decisions about the best maintenance strategy of petrochemical plants. Reliability analysis was applied on equipment (bike-centrifugal fan) between the period 2010-2014 at the Polo Petrobras Guamaré Industrial, situated in rural Guamaré municipality in the state of Rio Grande do Norte, where he collected data field, analyzed historical equipment and observing the behavior of faults and their impacts. The data were processed in commercial software reliability ReliaSoft BlockSim 9. The results were compared with a study conducted by the experts in the field in order to get the best maintenance strategy for the studied system. With the results obtained from the reliability analysis tools was possible to determine the availability of the centrifugal motor-fan and what will be its impact on the security of process units if it will fail. A new maintenance strategy was established to improve the reliability, availability, maintainability and decreased likelihood of Moto-Centrifugal Fan failures, it is a series of actions to promote the increased system reliability and consequent increase in cycle life of the asset. Thus, this strategy sets out preventive measures to reduce the probability of failure and mitigating aimed at minimizing the consequences.

Aditivo polimérico derivado de fonte renovável para aplicação em cimento asfáltico de petróleo

This study evaluated the effects of incorporating an additive from an agro-industrial residue, after some chemical modification reactions, to petroleum asphalt cement (CAP) through the polymerization reaction of a viscous polyol obtained by bagasse biomass oxypropylation reaction sugarcane with anhydrides. The polyol is obtained by biomass oxypropylation reaction with propylene oxide, the reaction was performed in an autoclave sealed with pressure and temperature control using 25 mL of OP for every 5 grams of biomass 200°C, which time reaction was two hours. The reaction is revealed by varying the system pressure, initially at atmospheric pressure to reach a maximum pressure value and its subsequent return to atmospheric pressure. For the choice of the most suitable reaction time for polymerization of the polyol with pyromellitic anhydride, the reaction was also conducted in an autoclave sealed with temperature controller (150 ° C) using 20 g of polyol, 1 g of sodium acetate (catalyst) and 8 g of pyromellitic anhydride with the times 30 and 60 minutes. The polymerized materials with different times were characterized by determining the relative viscosity and percentage content of extractable in cyclohexane / ethanol. Given the results with the polymerized material 30 minutes showed the lowest percentage content of extractives and an increased viscosity relative indicating that this time is highlighted with respect to time 60 minutes, because the material is possibly in the form of a crosslinked polymer. Given the choice of time of 30 minutes other polymerization reactions were performed with various anhydrides and other conditions employed different proportions by mass of polyol anhydrides we were referred to as condition I (20 g anhydride and 8 g of polyol), II (20 g anhydride and 20 g of polyol) and III (8 g anhydride and 20 g of polyol). The FTIR spectra of polymeric materials with different polymerization conditions used to prove the occurrence of chemical modification due to the appearance of a characteristic band ester groups (1750 cm-1) present in the polymerized material. He chose to work with the condition III, as is the condition which employs a larger amount of polyol, and even with the smaller amount of anhydride used FTIR spectra revealed that the polymerization reaction was performed. Among the various anhydrides (phthalic, maleic and pyromellitic) of the different conditions used that stood out before the solubility test with solvents analyzed was polymerized material with pyromellitic anhydride because the polymerized material likely in the form of a crosslinked polymer because it was insoluble or poorly soluble in the solvents tested. Polymerization of the polyol with pyromellitic anhydride using condition III, that is, BCPP30, CSPP30, PCPP30 e BCPPG30, provided an increase in thermal stability relative to material in the form of polyol. Applicability tests concerning the incorporation of 16% m / m BCPP30, CSPP30, PCPP30 e BCPPG30 additive in relation to the mass of 600 g CAP showed through characterization tests used, softening point, elastic recovery and marshall dosage, it is possible to use BCPP30 as an additive the conventional CAP, because even with the incorporation of this new additive modified CAP met the specifications of the appropriate standard.

Caracterização mecânica da liga AlSi10Mg obtida por SLM para aplicação em componentes automóveis

Este projeto visa efetuar a caracterização mecânica da liga AlSi10Mg obtida por SLM (Fundição de Metal por Laser) para aplicação em componentes automóveis. Ao longo deste projeto é efetuada uma pesquisa bibliográfica das tecnologias de fabrico rápido mais frequentemente aplicadas ao processamento de alumínios, abordando de forma específica a tecnologia SLM, bem como a influência dos seus parâmetros no processamento de ligas de alumínio. Será levado a cabo um estudo comparativo da liga AlSi10Mg fabricada por fundição em molde permanente com a obtida por SLM, analisando-se a microestrutura das ligas, bem como as suas propriedades mecânicas, através da realização de ensaios de dureza, tração, análise dinâmico-mecânica e fadiga. Deste modo será possível perceber as diferenças entre o comportamento mecânico da liga obtida por SLM e a liga obtida pelo método convencional. Em resultado do estudo realizado, observou-se que a liga AlSi10Mg obtida por SLM apresenta uma microestrutura muito mais fina do que a liga fabricada por fundição em molde permanente, o que lhe permite ter um comportamento mecânico superior na maioria dos ensaios mecânicos realizados. Assim, é possível aplicar a tecnologia SLM ao fabrico de componentes em alumínio no sector automóvel, visto ser possível obter propriedades mecânicas superiores ou equivalentes aos componentes fabricados pelos processos de fabrico convencionais.

Aplicação dos princípios LEAN MANAGEMENT ao projeto de moldes para injeção

Num mercado globalizado e extremamente competitivo, a escolha de uma metodologia de gestão é determinante para ditar o sucesso ou fracasso de uma empresa. O investimento em capital humano e tecnológico deve ser acompanhado por uma gestão de processos, rápida e eficaz, que direcione a organização para uma redução dos custos de um produto ou serviço. Nos últimos anos, vários autores têm demonstrado que uma das estratégias utilizadas para atingir este objetivo tem sido a aplicação da metodologia Lean Management, que ganhou reputação pelos resultados positivos alcançados. Este projeto foi elaborado em contexto industrial, no departamento de projeto da empresa Tecnifreza S.A., e teve como principal objetivo demonstrar que é possível obter uma diminuição do tempo de execução do projeto de um molde (lead time), através da aplicação dos princípios Lean Management. A metodologia utilizada assentou no registo detalhado de atividades predefinidas, ocorridas durante o projeto, baseada numa amostra constituída por nove moldes que melhor representam a realidade/tipologia produtiva da empresa. Após a análise dos dados obtidos, verifica-se que o desvio médio é de 91,7% entre o tempo de projeto inicialmente previsto pela direção e o tempo efetivo registado. Identificaram-se ainda as principais atividades que não acrescentaram valor aos projetos em estudo. Estas atividades, consideradas como desperdícios, perfazem no seu conjunto 34,6% do tempo total. Foram então sugeridas propostas de melhoria, de modo a reduzir ou eliminar estes tempos. De forma a avaliar o impacto destas propostas, foram realizadas estimativas tendo por base os dados de um molde tipo. Os resultados obtidos demonstram que, com a implementação das propostas de melhoria, são alcançados ganhos significativos na redução do lead time do projeto e consequentemente no tempo total de fabrico do molde. A antecipação na entrega dos desenhos 3D para a fabricação revela-se bastante evidente, existindo ainda um aumento no nivelamento da entrega de projetos para a fabricação. Face aos resultados apresentados verifica-se que a implementação de princípios Lean no departamento de projeto mostra-se potencialmente vantajosa, em particular com a introdução de células de trabalho e a realização do ciclo PDCA.

Estudo de um permutador de calor para aplicação em sistemas de recuperação de energia térmica

Grande parte da energia contida no combustível consumido por um motor de combustão interna é desperdiçada sob forma de calor, através do sistema de refrigeração do motor, do sistema de recirculação dos gases de escape e principalmente através dos gases de escape. Daí o interesse no estudo de sistemas que permitem o aproveitamento dessa energia residual dos veículos automóveis. Este trabalho centra-se no estudo de sistemas de aproveitamento da energia térmica contida nos gases de escape dos veículos automóveis, sendo o objetivo principal o estudo do permutador de calor que será utilizado para recuperação da energia térmica. Existem vários tipos de permutadores, na sua escolha entram fatores como as características dos fluidos de trabalho envolvidos, o custo, facilidade de manutenção, a aplicação. Para o caso deste estudo selecionou-se um permutador de carcaça e tubos e um permutador de tubos concêntricos. Uma vez que a seleção e otimização de um permutador de calor implica a minimização da perda de carga dos gases de escape e a maximização da eficiência térmica do sistema, numa primeira fase selecionou-se a geometria mais adequada. Em seguida fez-se uma comparação de diferentes modelos de cálculo da perda de carga e analisou-se o desempenho termo hidráulico do permutador. Por fim realizou-se um estudo paramétrico para verificar a influência dos parâmetros de construção (número de tubos, diâmetro e comprimento dos tubos).

Renovação da certificação do referencial BRC, aplicação do código de ética laboral ETI – Ethical Trading Initiative e do referencial específico da Walmart na central fruteira O Melro.OP

A crescente preocupação com a segurança alimentar por parte das empresas do setor, assim como a segurança e o bem estar dos trabalhadores cresce com o alargamento do mercado de exportação e importação de produtos. As exigências de muitos retalhistas e grossistas europeus reforçam a necessidade de implementação de referenciais específicos. Este trabalho tem por base a atualização da norma British Retail Consortium (BRC) para a sétima versão, implementação do referencial Ethical Trading Initiative (ETI) e Walmart na central fruteira O Melro.OP. Todos os referenciais foram analisados, de forma a compreender as melhores metodologias para o cumprimento dos requisitos exigidos, tendo sido consultada a legislação aplicável relevante aos vários setores, recursos humanos, ética, segurança e higiene no trabalho e ambiente. Procedeu-se à elaboração das check lists para cada referencial e a uma auditoria prévia com o objetivo de avaliar a situação atual da empresa. Elaboraram-se relatórios e planos de ação indicando as alterações a ter em conta para a implementação e atualização dos referenciais e toda a documentação associada. Posteriormente foi feita uma auditoria interna de modo a confirmar que o plano de ação da auditoria prévia foi aplicado, tendo-se elaborado o relatório da auditoria e novos planos de ação para futura melhoria e obtenção das respetivas certificações. Com a implementação destas certificações para os referenciais BRC, ETI e Walmart a empresa pode obter uma maior visibilidade no mercado, aumentado assim o seu leque de clientes.