Schools as meeting places : critical and inclusive literacies in changing local environments

Schools bring people together. Yet for many children there are major discontinuities between their lives in and out of school and such differences impact on literacy teaching and learning in both predictable and unpredictable ways. However if schools were reconceptualised as meeting places, where different people are thrown together (Massey, 2005) curriculum and pedagogy could be designed to take into account students’ and teachers’ different experiences and histories and to make those differences a resource for literacy learning. This paper draws on a long-term project with administrators and teachers working in a school situated in a site of urban regeneration and significant demographic shifts. It draws particularly on the ways in which one teacher re-positioned her grade 4/5 students as researchers, designers and journalists exploring student and staff memories of a school. It argues that place, and people’s relationships with places, can be a rich resource for literacy learning when teachers make it the object of study.

Aerosol mass spectrometric analysis of the chemical composition of non- refractory PM1 samples from school environments in Brisbane, Australia

Long term exposure to vehicle emissions has been associated with harmful health effects. Children are amongst the most susceptible group and schools represent an environment where they can experience significant exposure to vehicle emissions. However, there are limited studies on children’s exposure to vehicle emissions in schools. The aim of this study was to quantify the concentration of organic aerosol and in particular, vehicle emissions that children are exposed to during school hours. Therefore an Aerodyne compact time-of-flight aerosol mass spectrometer (TOF-AMS) was deployed at five urban schools in Brisbane, Australia. The TOF-AMS enabled the chemical composition of the non- refractory (NR-PM1) to be analysed with a high temporal resolution to assess the concentration of vehicle emissions and other organic aerosols during school hours. At each school the organic fraction comprised the majority of NR-PM1 with secondary organic aerosols as the main constitute. At two of the schools, a significant source of the organic aerosol (OA) was slightly aged vehicle emissions from nearby highways. More aged and oxidised OA was observed at the other three schools, which also recorded strong biomass burning influences. Primary emissions were found to dominate the OA at only one school which had an O:C ratio of 0.17, due to fuel powered gardening equipment used near the TOF-AMS. The diurnal cycle of OA concentration varied between schools and was found to be at a minimum during school hours. The major organic component that school children were exposed to during school hours was secondary OA. Peak exposure of school children to HOA occurred during school drop off and pick up times. Unless a school is located near major roads, children are exposed predominately to regional secondary OA as opposed to local emissions during schools hours in urban environments.

Spatial variation of particle number concentration in school microscale environments and its impact on exposure assessment

It has not yet been established whether the spatial variation of particle number concentration (PNC) within a microscale environment can have an effect on exposure estimation results. In general, the degree of spatial variation within microscale environments remains unclear, since previous studies have only focused on spatial variation within macroscale environments. The aims of this study were to determine the spatial variation of PNC within microscale school environments, in order to assess the importance of the number of monitoring sites on exposure estimation. Furthermore, this paper aims to identify which parameters have the largest influence on spatial variation, as well as the relationship between those parameters and spatial variation. Air quality measurements were conducted for two consecutive weeks at each of the 25 schools across Brisbane, Australia. PNC was measured at three sites within the grounds of each school, along with the measurement of meteorological and several other air quality parameters. Traffic density was recorded for the busiest road adjacent to the school. Spatial variation at each school was quantified using coefficient of variation (CV). The portion of CV associated with instrument uncertainty was found to be 0.3 and therefore, CV was corrected so that only non-instrument uncertainty was analysed in the data. The median corrected CV (CVc) ranged from 0 to 0.35 across the schools, with 12 schools found to exhibit spatial variation. The study determined the number of required monitoring sites at schools with spatial variability and tested the deviation in exposure estimation arising from using only a single site. Nine schools required two measurement sites and three schools required three sites. Overall, the deviation in exposure estimation from using only one monitoring site was as much as one order of magnitude. The study also tested the association of spatial variation with wind speed/direction and traffic density, using partial correlation coefficients to identify sources of variation and non-parametric function estimation to quantify the level of variability. Traffic density and road to school wind direction were found to have a positive effect on CVc, and therefore, also on spatial variation. Wind speed was found to have a decreasing effect on spatial variation when it exceeded a threshold of 1.5 (m/s), while it had no effect below this threshold. Traffic density had a positive effect on spatial variation and its effect increased until it reached a density of 70 vehicles per five minutes, at which point its effect plateaued and did not increase further as a result of increasing traffic density.

Learning environments – Laboratories at the cross roads

Laboratories and technical hands on learning have always been a part of Engineering and Science based university courses. They provide the interface where theory meets practice and students may develop professional skills through interacting with real objects in an environment that models appropriate standards and systems. Laboratories in many countries are facing challenges to their sustainable operation and effectiveness. In some countries such as Australia, significantly reduced funding and staff reduction is eroding a once strong base of technical infrastructure. Other countries such as Thailand are seeking to develop their laboratory infrastructure and are in need of staff skill development, management and staff structure in technical areas. In this paper the authors will address the need for technical development with reference to work undertaken in Thailand and Australia. The authors identify the roads which their respective university sectors are on and point out problems and opportunities. It is hoped that the cross roads where we meet will result in better directions for both.

Image based visual servo control for fixed wing UAVs tracking linear infrastructure in wind

This paper presents an Image Based Visual Servo control design for Fixed Wing Unmanned Aerial Vehicles tracking locally linear infrastructure in the presence of wind using a body fixed imaging sensor. Visual servoing offers improved data collection by posing the tracking task as one of controlling a feature as viewed by the inspection sensor, although is complicated by the introduction of wind as aircraft heading and course angle no longer align. In this work it is shown that the effects of wind alter the desired line angle required for continuous tracking to equal the wind correction angle as would be calculated to set a desired course. A control solution is then sort by linearizing the interaction matrix about the new feature pose such that kinematics of the feature can be augmented with the lateral dynamics of the aircraft, from which a state feedback control design is developed. Simulation results are presented comparing no compensation, integral control and the proposed controller using the wind correction angle, followed by an assessment of response to atmospheric disturbances in the form of turbulence and wind gusts

Linking Karumba : Creating Sustainable Connections

Linking Karumba: Creating Sustainable Connections This exhibition showcases the work of 3rd -4th year undergraduate landscape architecture, architecture, Industrial Design, Environmental Engineering, Civil Engineering students in response to issues of sustainability in the Gulf of Carpentaria town of Karumba. It presented the work to the Karumba and Carpentaria Shire community. 16 students and four staff set off on a 2488km journey to undertake the first half of the Carpentaria Project: a fortnight-long strategic planning project entitled Linking Karumba to encourage social, economic, environmental and cultural linkages across the town. Karumba, along with the nearby town of Normanton, is one of Queensland’s most remote settlements. Its economy is based on fishing, tourism, and mining. It has two centres, 2.5km apart by river, or 9km by road. This physical disconnect was identified by Carpentaria Shire Council (CSC) and the Karumba Progress Association (KPA) as a source of socio-cultural disconnection, which formed the basis of our project brief. Student designs were highly responsive to the character of Karumba’s culture and environment, indicating remarkable levels of immersion, and attracting $830 000 in Qld. state government funding for implementation. The Exhibition Four groups of four students produced four strategic planning and design options toward this future: Make the Switch: Alice Anonuevo, Michael Marriott, Carla Priestley & Grant Harvey Realigning the Systems: Claudia Bergs, Rebecca Stephens, Anna Coulson & Lois Kerrigan Diversification of Experience: Rebecca North, Kyle Bush, Debra Sullivan & Jenna Green The River is the Main Street: Ashley Nicholson, Monica Kuiken, Dean Bowen & Bill Schild

Community engagement : creating sustainable futures by design

QUT Alumni and Development Office, Engagement and Partnerships Seminar 'Managing Partnerships' As part of a week of engagement/partnership activities, this seminar outlined the engagement practices of 'Sustainable Futures by Design' and the BAC partnership. Presenters of two QUT Engagement Innovation projects discussed how emphasis on how the project benefited their work and the university generally, especially through the partnership, including through enhanced teaching and research. They outlined the principles and practices of good partnership management. Presenters: Shannon Satherley & Les Dawes: Community Engagement: Creating Sustainable Futures by Design Ashantha Goonetilleke & Bernard Murchison: QUT - BAC Partnership Satherley & Dawes: 'Developing and Maintaining the Partnerships: giving and receiving; expecting the unexpected; administration; enjoying the rewards.'C

Featureless visual processing for SLAM in changing outdoor environments

Vision-based SLAM is mostly a solved problem providing clear, sharp images can be obtained. However, in outdoor environments a number of factors such as rough terrain, high speeds and hardware limitations can result in these conditions not being met. High speed transit on rough terrain can lead to image blur and under/over exposure, problems that cannot easily be dealt with using low cost hardware. Furthermore, recently there has been a growth in interest in lifelong autonomy for robots, which brings with it the challenge in outdoor environments of dealing with a moving sun and lack of constant artificial lighting. In this paper, we present a lightweight approach to visual localization and visual odometry that addresses the challenges posed by perceptual change and low cost cameras. The approach combines low resolution imagery with the SLAM algorithm, RatSLAM. We test the system using a cheap consumer camera mounted on a small vehicle in a mixed urban and vegetated environment, at times ranging from dawn to dusk and in conditions ranging from sunny weather to rain. We first show that the system is able to provide reliable mapping and recall over the course of the day and incrementally incorporate new visual scenes from different times into an existing map. We then restrict the system to only learning visual scenes at one time of day, and show that the system is still able to localize and map at other times of day. The results demonstrate the viability of the approach in situations where image quality is poor and environmental or hardware factors preclude the use of visual features.

Social and mobile interaction design to increase the loyalty rates of young blood donors

Young adults represent the largest group of first time donors to the Australian Red Cross Blood Service, but they are also the least loyal group and often do not return after their first donation. At the same time, many young people use the internet and various forms of social media on a daily basis. Web and mobile based technological practices and communication patterns change the way that young people interact with one another, with their families, and communities. Combining these two points of departure, this study seeks to identify best practices of employing mobile apps and social media in order to enhance the loyalty rates of young blood donors. The findings reported in this paper are based on a qualitative approach presenting a nuanced understanding of the different factors that motivate young people to donate blood in the first place, as well as the obstacles or issues that prevent them from returning. The paper discusses work in progress with a view to inform the development of interactive prototypes trialling three categories of features: personal services (such as scheduling); social media (such as sharing the donation experience with friends to raise awareness); and data visualisations (such as local blood inventory levels). We discuss our translation of research findings into design implications.

Cultural impact on e-service use in Saudi Arabia : the need for interaction with other humans

This paper reports the results of a mixed method approach to answer: To what extent do cultural values impact on e-service use in Saudi Arabia, and if so how? This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture with focus on our scope: the fear of a lack of Interaction with other Humans. It will then describe the method used and present the qualitative and quantitative findings related to the need for Interactions with other Humans. Much of the written literature about human interaction aims at Information Systems design or design improvement. Yet, this is different to what is being investigated in this study. One of the factors this study will consider is the perceived lack of interaction with other humans or the anxiety people may feel in missing the physical interaction with other people by fully moving business interaction to the virtual world. The review of the literature indicates that the impact of such factor on Information and Communication Technologies (ICT) use has not been studied. This research aims to cover this gap by investigating to what extent the fear of a lack of Interaction with other Humans, as one of Saudi Arabia’s cultural values, impacts on e-service use in Saudi Arabia. The tested hypothesis was found consistent with its predicted outcome: the fear of a lack of Interaction with other Humans is a negative predictor of intention to use e-services in Saudi Arabia. It is evidenced that consideration of the impact of the cultural values will mainly contribute to the enhancement of ICTs implementation and use.

Rat meets iRat

Biorobotics has the potential to provide an integrated understanding from neural systems to behavior that is neither ethical nor technically feasible with living systems. Robots that can interact with animals in their natural environment open new possibilities for empirical studies in neuroscience. However, designing a robot that can interact with a rodent requires considerations that span a range of disciplines. For the rat's safety, the body form and movements of the robot need to take into consideration the safety of the animal, an appropriate size for the rodent arenas, and behaviors for interaction. For the robot's safety, its form must be robust in the face of typically inquisitive and potentially aggressive behaviors by the rodent, which can include chewing on exposed parts, including electronics, and deliberate or accidental fouling. We designed a rat-sized robot, the iRat (intelligent rat animat technology) for studies in neuroscience. The iRat is about the same size as a rat and has the ability to navigate autonomously around small environments. In this study we report the first interactions between the iRat and real rodents in a free exploration task. Studies with five rats show that the rats and iRat interact safely for both parties.

Towards a capabilities database to inform inclusive design : Experimental investigation of effective survey-based predictors of human-product interaction

A key issue in the field of inclusive design is the ability to provide designers with an understanding of people's range of capabilities. Since it is not feasible to assess product interactions with a large sample, this paper assesses a range of proxy measures of design-relevant capabilities. It describes a study that was conducted to identify which measures provide the best prediction of people's abilities to use a range of products. A detailed investigation with 100 respondents aged 50-80 years was undertaken to examine how they manage typical household products. Predictor variables included self-report and performance measures across a variety of capabilities (vision, hearing, dexterity and cognitive function), component activities used in product interactions (e.g. using a remote control, touch screen) and psychological characteristics (e.g. self-efficacy, confidence with using electronic devices). Results showed, as expected, a higher prevalence of visual, hearing, dexterity, cognitive and product interaction difficulties in the 65-80 age group. Regression analyses showed that, in addition to age, performance measures of vision (acuity, contrast sensitivity) and hearing (hearing threshold) and self-report and performance measures of component activities are strong predictors of successful product interactions. These findings will guide the choice of measures to be used in a subsequent national survey of design-relevant capabilities, which will lead to the creation of a capability database. This will be converted into a tool for designers to understand the implications of their design decisions, so that they can design products in a more inclusive way.

Tag-based interaction in online and mobile banking : a preliminary study of the effect on usability

In this paper we describe tag-based interaction afforded by a tag-based interface in online and mobile banking, and present our preliminary usability evaluation findings. We conducted a pilot usability study with a group of banking users by comparing the present 'conventional' interface and tag-based interface. The results show that participants perceive the tag-based interface as more usable in both online and mobile contexts. Participants also rated the tag-based interface better despite their unfamiliarity and perceived it as more user-friendly. Additionally, the results highlight that tag-based interaction is more effective in the mobile context especially to inexperienced mobile banking users. This in turn could have a positive effect on the adoption and acceptance of mobile banking in general and also specifically in Australia. We discuss our findings in more detail in the later sections of this paper and conclude with a discussion on future work.

Co-creating Videogames

Co-creativity has become a significant cultural and economic phenomenon. Media consumers have become media producers. This book offers a rich description and analysis of the emerging participatory, co-creative relationships within the videogames industry. Banks discusses the challenges of incorporating these co-creative relationships into the development process. Drawing on a decade of research within the industry, the book gives us valuable insight into the continually changing and growing world of video games.

Diversity and Differentiation

New ways of working are being embraced by early childhood educators as they cope with demands from national reforms and changing communities. While reformers are pressing for social equity and improved outcomes for families and children, communities are diverging in terms of ethnicity, culture, language and socioeconomic status. As a consequence, early childhood educators are being challenged to expand their existing repertoire of practices in order to more effectively provide quality learning experiences for every child in their care. Practice enhancement and differentiated pedagogy are needed to address the additional needs of an increasing number of diverse learners. Community expectations are particularly focused on better educational supports for children in five cluster areas: • Culturally diverse and Indigenous backgrounds • ‘at risk’ because of socio-economic and abuse conditions • Communicative, emotional and behavioural disorders • Disabilities and learning difficulties and • Recognised gifts and talents This chapter focuses on some everyday ractices that can be used strategically to better support all children, including those with additional educational needs. All practices are well supported in the literature and are substantiated by either research findings or strong, socially determined values. They also very ‘doable’ and sustainable in today’s dynamic and multifaceted early childhood settings. Seven keys practices will be introduced, together with examples of how they can be applied to both enhance the learning of individual children and to strengthen a sense of group belonging. The practices are: • Having positive beliefs about all children • Learning about each child • Building meaningful relationships around the child • Creating supportive learning environments for the child • Providing engaging learning experiences for the child • Differentiating instruction for the child • Using child progress data to improve learning and teaching