Carbon isotope fractionation for cotton genotype selection

The objective of this work was to evaluate the carbon isotope fractionation as a phenomic facility for cotton selection in contrasting environments and to assess its relationship with yield components. The experiments were carried out in a randomized block design, with four replicates, in the municipalities of Santa Helena de Goiás (SHGO) and Montividiu (MONT), in the state of Goiás, Brazil. The analysis of carbon isotope discrimination (Δ) was performed in 15 breeding lines and three cultivars. Subsequently, the root growth kinetic and root system architecture from the selected genotypes were determined. In both locations, Δ analyses were suitable to discriminate cotton genotypes. There was a positive correlation between Δ and seed-cotton yield in SHGO, where water deficit was more severe. In this site, the negative correlations found between Δ and fiber percentage indicate an integrative effect of gas exchange on Δ and its association with yield components. As for root robustness and growth kinetic, the GO 05 809 genotype performance contributes to sustain the highest values of Δ found in MONT, where edaphoclimatic conditions were more suitable for cotton. The use of Δ analysis as a phenomic facility can help to select cotton genotypes, in order to obtain plants with higher efficiency for gas exchange and water use.

Selection of the most informative morphoagronomic descriptors for cassava germplasm

The objective of this work was to select the most informative morphoagronomic descriptors for cassava (Manihot esculenta) germplasm and to evaluate the ability of different methods to select the descriptors. Ninety-five accessions were characterized using 51 morphoagronomic descriptors. Data were subjected to a multiple correspondence analysis (MCA), whose information was used in the following four methods of descriptor selection: reverse order of the descriptor for the pth factorial axis of the MCA (Jolliffe); sequential, multiple correspondence analysis (SMCA); mean of the contribution orders of the descriptor in the first three factorial axes (C3PA); and C3PA method weighted by the respective eigenvalues of the full analysis (C3PAWeig). The correlations between the dissimilarity matrix with all descriptors and the most informative descriptors were high and significant (0.75, 0.77, 0.83, and 0.84 for C3PAWeig, C3PA, SMCA, and Jolliffe, respectively). The less informative descriptors were discarded, considering those common among the selection methods and relevant for the breeding interests. Therefore, 32 morphoagronomic descriptors with correlation between the dissimilarity matrices (r=0.81) were selected, due to their high capacity to discriminate cassava germplasm and to their ability to maintain some preliminary agronomic traits, useful for the initial characterization of the germplasm.

Genetic variability of hull-less barley accessions based on molecular and quantitative data

The objective of this work was to characterize and quantify the genetic, molecular, and agronomic variability of hull-less barley genotypes, for the selection of parents and identification of genotypes adapted to the irrigated production system in the Brazilian Cerrado. Eighteen hull-less barley accessions were evaluated, and three covered barley accessions served as reference. The characterization was based on 157 RAPD molecular markers and ten agronomic traits. Genetic distance matrices were obtained based on molecular markers and quantitative traits. Graphic grouping and dispersion analyses were performed. Genetic, molecular, and agronomic variability was high among genotypes. Ethiopian accessions were genetically more similar, and the Brazilian ones were genetically more distant. For agronomic traits, two more consistent groupings were obtained, one with the most two-rowed materials, and the other with six-rowed materials. The more diverging materials were the two-rowed CI 13453, CN Cerrado 5, CN Cerrado 1, and CN Cerrado 2. The PI 356466, CN Cerrado 1, PI 370799, and CI 13453 genotypes show agronomic traits of interest and, as genetically different genotypes, they are indicated for crossing, in breeding programs.

Pakkausrakenteenmateriaalinvalinta ja rakennesuunnittelu

Epäherkkien räjähteiden teknologian käyttö mahdollistaa räjähdeturvallisuuden ja sa-malla sotilaallisen suorituskyvyn parantumisen. Suomen Puolustusvoimat päätti IM-teknologian käyttöönotosta vuonna 2004, mikä on edellyttänyt räjähdevalmistajilta tuotteidensa kehitystoimenpiteitä. Yksi osa-alue erään räjähdevalmistajan ajopanostuotteen kehitystyöstä on Exel Oyj:n valmistama panospakkaus, joka pyritään kehittämään uudistuneiden vaatimusten mukaiseksi. Tässä diplomityössä selvitettiin IM-tuotteen vaatimukset ja laadittiin panospakkauksen vaatimusprofiili, jonka perusteella tehtiinkirjallisen selvitys ballistisista materiaaleista. Panospakkauksen rakenneratkaisut perustuivat materiaalinvalintaan, joka toteutettiin ominaisarvovertailulla.Rakenneratkaisuja testattiin sekä ballistisesti että mekaanisilla testausmenetelmillä. Lisäksi testausmenetelmien välille tehtiin korrelaatiovertailuja, joidentulokset ovat lupaavia. Projektin lopputuloksena saatiin kehitettyä Exel Oyj:lle panospakkausratkaisu, jolla voidaan edistää suojattavan tuotteen IM-vaatimusten täyttymistä. Rakenteelle toteutetun lujuusanalyysin perusteella pakkausrakennetta voidaan pitää käyttökohteeseen soveltuvana.

Antipsychotic polypharmacy in a regional health service: a population-based study

Background To analyse the extent and profile of outpatient regular dispensation of antipsychotics, both in combination and monotherapy, in the Barcelona Health Region (Spain), focusing on the use of clozapine and long-acting injections (LAI). Methods Antipsychotic drugs dispensed for people older than 18 and processed by the Catalan Health Service during 2007 were retrospectively reviewed. First and second generation antipsychotic drugs (FGA and SGA) from the Anatomical Therapeutic Chemical classification (ATC) code N05A (except lithium) were included. A patient selection algorithm was designed to identify prescriptions regularly dispensed. Variables included were age, gender, antipsychotic type, route of administration and number of packages dispensed. Results A total of 117,811 patients were given any antipsychotic, of whom 71,004 regularly received such drugs. Among the latter, 9,855 (13.9%) corresponded to an antipsychotic combination, 47,386 (66.7%) to monotherapy and 13,763 (19.4%) to unspecified combinations. Of the patients given antipsychotics in association, 58% were men. Olanzapine (37.1%) and oral risperidone (36.4%) were the most common dispensations. Analysis of the patients dispensed two antipsychotics (57.8%) revealed 198 different combinations, the most frequent being the association of FGA and SGA (62.0%). Clozapine was dispensed to 2.3% of patients. Of those who were receiving antipsychotics in combination, 6.6% were given clozapine, being clozapine plus amisulpride the most frequent association (22.8%). A total of 3.800 patients (5.4%) were given LAI antipsychotics, and 2.662 of these (70.1%) were in combination. Risperidone was the most widely used LAI. Conclusions The scant evidence available regarding the efficacy of combining different antipsychotics contrasts with the high number and variety of combinations prescribed to outpatients, as well as with the limited use of clozapine. Background To analyse the extent and profile of outpatient regular dispensation of antipsychotics, both in combination and monotherapy, in the Barcelona Health Region (Spain), focusing on the use of clozapine and long-acting injections (LAI). Methods Antipsychotic drugs dispensed for people older than 18 and processed by the Catalan Health Service during 2007 were retrospectively reviewed. First and second generation antipsychotic drugs (FGA and SGA) from the Anatomical Therapeutic Chemical classification (ATC) code N05A (except lithium) were included. A patient selection algorithm was designed to identify prescriptions regularly dispensed. Variables included were age, gender, antipsychotic type, route of administration and number of packages dispensed. Results A total of 117,811 patients were given any antipsychotic, of whom 71,004 regularly received such drugs. Among the latter, 9,855 (13.9%) corresponded to an antipsychotic combination, 47,386 (66.7%) to monotherapy and 13,763 (19.4%) to unspecified combinations. Of the patients given antipsychotics in association, 58% were men. Olanzapine (37.1%) and oral risperidone (36.4%) were the most common dispensations. Analysis of the patients dispensed two antipsychotics (57.8%) revealed 198 different combinations, the most frequent being the association of FGA and SGA (62.0%). Clozapine was dispensed to 2.3% of patients. Of those who were receiving antipsychotics in combination, 6.6% were given clozapine, being clozapine plus amisulpride the most frequent association (22.8%). A total of 3.800 patients (5.4%) were given LAI antipsychotics, and 2.662 of these (70.1%) were in combination. Risperidone was the most widely used LAI. Conclusions The scant evidence available regarding the efficacy of combining different antipsychotics contrasts with the high number and variety of combinations prescribed to outpatients, as well as with the limited use of clozapine.

Market Area Selection of aSawmill Machinery Manufacturer

Tämän diplomityön tavoitteena on kartoittaa suomalaisen sahakonevalmistaja Veisto Oy:n kannalta lähitulevaisuuden merkittävimmät markkina-alueet, joiden sahateollisuuteen tehdään lähivuosina eniten korkean teknologian investointeja. Markkina-alueiden valinnassa sovelletaan sekä numeerisiin tilastoihin että asiantuntijahaastatteluihin pohjautuvia ranking-menetelmiä. Työn ensimmäinen osa käsittelee kansainvälisten teollisten markkinoiden ominaispiirteitä ja niiden analysointia. Pääpaino on kuitenkin screening-menetelmillä, markkina-alueiden vertailumenetelmilläja päätöksenteon työkaluilla. Työn toisessa osassa keskitytään markkina-alueiden screeningiin, analysointiin ja maiden eri ominaisuuksien vertailuun. Päätöksentekomatriiseja hyödyntäen valitaan Veisto Oy:lle kolme tällä hetkellä houkuttelevinta markkina-aluetta, joita ovat Venäjä, USA:n kaakkoisosan Southern Yellow Pine -alue sekä Etelä-Amerikan suurimmat sahaajamaat (Brasilia, Argentiina ja Chile) yhtenä alueena. Valituilla alueilla on Veiston kannalta omat haasteensa: USA:ssa vahvat kotimaiset kilpailijat ja uusien referenssien saaminen, Venäjällä investointien epävarmuus ja markkina-alueen laajuuden tuoma monimuotoisuus sekä Etelä-Amerikassa vahvat ruotsalaiset kilpailijat sekä etenkin Brasilian osalta tuntuvat suojatullit.

Methods for Region Based Paper Surface Roughness Measurement

Paperin pinnan karheus on yksi paperin laatukriteereistä. Sitä mitataan fyysisestipaperin pintaa mittaavien laitteiden ja optisten laitteiden avulla. Mittaukset vaativat laboratorioolosuhteita, mutta nopeammille, suoraan linjalla tapahtuville mittauksilla olisi tarvetta paperiteollisuudessa. Paperin pinnan karheus voidaan ilmaista yhtenä näytteelle kohdistuvana karheusarvona. Tässä työssä näyte on jaettu merkitseviin alueisiin, ja jokaiselle alueelle on laskettu erillinen karheusarvo. Karheuden mittaukseen on käytetty useita menetelmiä. Yleisesti hyväksyttyä tilastollista menetelmää on käytetty tässä työssä etäisyysmuunnoksen lisäksi. Paperin pinnan karheudenmittauksessa on ollut tarvetta jakaa analysoitava näyte karheuden perusteella alueisiin. Aluejaon avulla voidaan rajata näytteestä selvästi karheampana esiintyvät alueet. Etäisyysmuunnos tuottaa alueita, joita on analysoitu. Näistä alueista on muodostettu yhtenäisiä alueita erilaisilla segmentointimenetelmillä. PNN -menetelmään (Pairwise Nearest Neighbor) ja naapurialueiden yhdistämiseen perustuvia algoritmeja on käytetty.Alueiden jakamiseen ja yhdistämiseen perustuvaa lähestymistapaa on myös tarkasteltu. Segmentoitujen kuvien validointi on yleensä tapahtunut ihmisen tarkastelemana. Tämän työn lähestymistapa on verrata yleisesti hyväksyttyä tilastollista menetelmää segmentoinnin tuloksiin. Korkea korrelaatio näiden tulosten välillä osoittaa onnistunutta segmentointia. Eri kokeiden tuloksia on verrattu keskenään hypoteesin testauksella. Työssä on analysoitu kahta näytesarjaa, joidenmittaukset on suoritettu OptiTopolla ja profilometrillä. Etäisyysmuunnoksen aloitusparametrit, joita muutettiin kokeiden aikana, olivat aloituspisteiden määrä ja sijainti. Samat parametrimuutokset tehtiin kaikille algoritmeille, joita käytettiin alueiden yhdistämiseen. Etäisyysmuunnoksen jälkeen korrelaatio oli voimakkaampaa profilometrillä mitatuille näytteille kuin OptiTopolla mitatuille näytteille. Segmentoiduilla OptiTopo -näytteillä korrelaatio parantui voimakkaammin kuin profilometrinäytteillä. PNN -menetelmän tuottamilla tuloksilla korrelaatio oli paras.

Independent sources of condition dependency and multiple pathways determine a composite trait: lessons from carotenoid-based plumage colouration.

Many colour ornaments are composite traits consisting of at least four components, which themselves may be more complex, determined by independent evolutionary pathways, and potentially being under different environmental control. To date, little evidence exists that several different components of colour elaboration are condition dependent and no direct evidence exists that different ornamental components are affected by different sources of variation. For example, in carotenoid-based plumage colouration, one of the best-known condition-dependent ornaments, colour elaboration stems from both condition-dependent pigment concentration and structural components. Some environmental flexibility of these components has been suggested, but specifically which and how they are affected remains unknown. Here, we tested whether multiple colour components may be condition dependent, by using a comprehensive 3 × 2 experimental design, in which we carotenoid supplemented and immune challenged great tit nestlings (Parus major) and quantified effects on different components of colouration. Plumage colouration was affected by an interaction between carotenoid availability and immune challenge. Path analyses showed that carotenoid supplementation increased plumage saturation via feather carotenoid concentration and via mechanisms unrelated to carotenoid deposition, while immune challenge affected feather length, but not carotenoid concentration. Thus, independent condition-dependent pathways, affected by different sources of variation, determine colour elaboration. This provides opportunities for the evolution of multiple signals within components of ornamental traits. This finding indicates that the selective forces shaping the evolution of different components of a composite trait and the trait's signal content may be more complex than believed so far, and that holistic approaches are required for drawing comprehensive evolutionary conclusions.

The effects of productivity on profitability: a case study at firm level using an activity-based costing approach

Productivity and profitability are important concepts and measures describing the performance and success of a firm. We know that increase in productivity decreases the costs per unit produced and leads to better profitability. This common knowledge is not, however, enough in the modern business environment. Productivity improvement is one means among others for increasing the profitability of actions. There are many means to increase productivity. The use of these means presupposes operative decisions and these decisions presuppose informationabout the effects of these means. Productivity improvement actions are in general made at floor level with machines, cells, activities and human beings. Profitability is most meaningful at the level of the whole firm. It has been very difficult or even impossible to analyze closely enough the economical aspects of thechanges at floor level with the traditional costing systems. New ideas in accounting have only recently brought in elements which make it possible to considerthese phenomena where they actually happen. The aim of this study is to supportthe selection of objects to productivity improvement, and to develop a method to analyze the effects of the productivity change in an activity on the profitability of a firm. A framework for systemizing the economical management of productivity improvement is developed in this study. This framework is a systematical way with two stages to analyze the effects of productivity improvement actions inan activity on the profitability of a firm. At the first stage of the framework, a simple selection method which is based on the worth, possibility and the necessity of the improvement actions in each activity is presented. This method is called Urgency Analysis. In the second stage it is analyzed how much a certain change of productivity in an activity affects the profitability of a firm. A theoretical calculation model with which it is possible to analyze the effects of a productivity improvement in monetary values is presented. On the basis of this theoretical model a tool is made for the analysis at the firm level. The usefulness of this framework was empirically tested with the data of the profit center of one medium size Finnish firm which operates in metal industry. It is expressedthat the framework provides valuable information about the economical effects of productivity improvement for supporting the management in their decision making.

Cost information in engineering design -Potentials and limitations of activity-based costing

The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

Supervised localimage feature detection

This thesis is about detection of local image features. The research topic belongs to the wider area of object detection, which is a machine vision and pattern recognition problem where an object must be detected (located) in an image. State-of-the-art object detection methods often divide the problem into separate interest point detection and local image description steps, but in this thesis a different technique is used, leading to higher quality image features which enable more precise localization. Instead of using interest point detection the landmark positions are marked manually. Therefore, the quality of the image features is not limited by the interest point detection phase and the learning of image features is simplified. The approach combines both interest point detection and local description into one phase for detection. Computational efficiency of the descriptor is therefore important, leaving out many of the commonly used descriptors as unsuitably heavy. Multiresolution Gabor features has been the main descriptor in this thesis and improving their efficiency is a significant part. Actual image features are formed from descriptors by using a classifierwhich can then recognize similar looking patches in new images. The main classifier is based on Gaussian mixture models. Classifiers are used in one-class classifier configuration where there are only positive training samples without explicit background class. The local image feature detection method has been tested with two freely available face detection databases and a proprietary license plate database. The localization performance was very good in these experiments. Other applications applying the same under-lying techniques are also presented, including object categorization and fault detection.

Effect of growth selection on morphology in Pirenaica cattle

Twelve variables were identified to define morphology in 109 calves sired by eight Pirenaica bulls widely used in artificial insemination. The effect of selection for weight at 210 days of age (W210) was detected from the regression coefficient between the 12 variables and the selection index for W210 used in the breeding plan. Unbiased estimates of the genetic correlated responses on the morphology were obtained without previously estimating the genetic correlation among traits. In Pirenaica cattle, selection for W210 increased slaughter live weight, chest depth and corporal length. The expected changes on height (withers, back and rump), rump width and thoracic perimeter were lower but positive and statistically significant.

Review. Characterization and selection of hexaploid wheats containing resistance to Heterodera avenae or Mayetiola destructor introgressed from Aegilops

Cereal cyst nematode (CCN, Heterodera avenae) and Hessian fly (HF, Mayetiola destructor) are two major pests affecting wheat crops worldwide including important cereal areas of Spain. Aegilops ventricosa and Ae. triuncialis were used as donors in a strategy to introduce resistance genes (RG) for these pests in hexaploid wheat (Triticum aestivum L.). Two 42 chromosomes introgression lines have been derived from Ae. ventricosa: H-93-8 and H-93-33 carrying genes Cre2 and H27 conferring resistance to CCN and HF, respectively. Line TR-3531 with 42 chromosomes has been derived from Ae. triuncialis and carries RGs conferring resistance for CCN (Cre7) and for HF (H30). Alien material has been incorporated in lines H-93 by chromosomal substitution and recombination, while in line TR-3531 homoeologous recombination affecting small DNA fragments has played a major role. It has been demonstrated that Cre2, Cre7, H27 and H30 are major single dominant genes and not allelic of other previously described RGs. Biochemical and molecular-biology studies of the defense mechanism triggered by Cre2 and Cre7 have revealed specific induction of peroxidase and other antioxidant enzymes. In parallel to these basic studies advanced lines carrying resistance genes for CNN and/or HF have been developed. Selection was done using molecular markers for eventually «pyramiding» resistance genes. Several isozyme and RAPD markers have been described and, currently, new markers based on transposable elements and NBS-LRR sequences are being developed. At present, two advanced lines have already been included at the Spanish Catalogue of Commercial Plant Varieties.

Clinical features for diagnosis of pneumonia in children younger than 5 years: a systematic review and meta-analysis.

BACKGROUND: Pneumonia is the biggest cause of deaths in young children in developing countries, but early diagnosis and intervention can effectively reduce mortality. We aimed to assess the diagnostic value of clinical signs and symptoms to identify radiological pneumonia in children younger than 5 years and to review the accuracy of WHO criteria for diagnosis of clinical pneumonia. METHODS: We searched Medline (PubMed), Embase (Ovid), the Cochrane Database of Systematic Reviews, and reference lists of relevant studies, without date restrictions, to identify articles assessing clinical predictors of radiological pneumonia in children. Selection was based on: design (diagnostic accuracy studies), target disease (pneumonia), participants (children aged <5 years), setting (ambulatory or hospital care), index test (clinical features), and reference standard (chest radiography). Quality assessment was based on the 2011 Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) criteria. For each index test, we calculated sensitivity and specificity and, when the tests were assessed in four or more studies, calculated pooled estimates with use of bivariate model and hierarchical summary receiver operation characteristics plots for meta-analysis. FINDINGS: We included 18 articles in our analysis. WHO-approved signs age-related fast breathing (six studies; pooled sensitivity 0·62, 95% CI 0·26-0·89; specificity 0·59, 0·29-0·84) and lower chest wall indrawing (four studies; 0·48, 0·16-0·82; 0·72, 0·47-0·89) showed poor diagnostic performance in the meta-analysis. Features with the highest pooled positive likelihood ratios were respiratory rate higher than 50 breaths per min (1·90, 1·45-2·48), grunting (1·78, 1·10-2·88), chest indrawing (1·76, 0·86-3·58), and nasal flaring (1·75, 1·20-2·56). Features with the lowest pooled negative likelihood ratio were cough (0·30, 0·09-0·96), history of fever (0·53, 0·41-0·69), and respiratory rate higher than 40 breaths per min (0·43, 0·23-0·83). INTERPRETATION: Not one clinical feature was sufficient to diagnose pneumonia definitively. Combination of clinical features in a decision tree might improve diagnostic performance, but the addition of new point-of-care tests for diagnosis of bacterial pneumonia would help to attain an acceptable level of accuracy. FUNDING: Swiss National Science Foundation.