Distal locking of femoral nails: evaluation of a new radiation-independent targeting system.

OBJECTIVES: The purpose of this study was to assess the effectiveness of a novel radiation-independent aiming device for distal locking of intramedullary nails in a human cadaver model. METHODS: A new targeting system was used in 25 intact human cadaver femora for the distal locking procedure after insertion of an intramedullary nail. The number of successful screw placements and the time needed for this locking procedure were recorded. The accuracy of the aiming process was evaluated by computed tomography. RESULTS: The duration of the distal locking process was 8.0 ± 1.8 minutes (mean ± SD; range, 4-11 minutes). None of the screw placements required fluoroscopic guidance. Computed tomography revealed high accuracy of the locking process. The incidence angle (α) of the locking screws through the distal locking holes of the nail was 86.8° ± 5.0° (mean ± SD; range, 80°-96°). Targeting failed in 1 static locking screw because of a material defect in the drilling sleeve. CONCLUSIONS: This cadaver study indicated that an aiming arm-based targeting device is highly reliable and accurate. The promising results suggest that it will help to decrease radiation exposure compared with the traditional "free-hand technique."

Non-classical karyotypic features in relapsed childhood B-cell precursor acute lymphoblastic leukemia.

Karyotype analysis of acute lymphoblastic leukemia (ALL) at diagnosis has provided valuable prognostic markers for treatment stratification. However, reports of cytogenetic studies of relapsed ALL samples are limited. We compared the karyotypes from 436 nonselected B-cell precursor ALL patients at initial diagnosis and of 76 patients at first relapse. We noticed a relative increase of karyotypes that did not fall into the classic ALL cytogenetic subgroups (high hyperdiploidy, t(12;21), t(9;22), 11q23, t(1;19), <45 chromosomes) in a group of 29 patients at relapse (38%) compared to 130 patients at presentation (30%). Non-classical cytogenetic aberrations in these 29 patients were mostly found on chromosomes 1, 2, 7, 9, 13, 14, and 17. We also describe six rare reciprocal translocations, three of which involved 14q32. The most frequent abnormalities were found in 9p (12/29 cases) and were associated with a marked decrease in the duration of the second remission, but not of the probability of 10-year event-free survival after relapse treatment. From 29 patients with non-classical cytogenetic aberrations, only 8 (28%) had been stratified to a high risk-arm on the first treatment protocol, suggesting that this subgroup might benefit from the identification of new prognostic markers in future studies.

Modelling Bone Mineral Density in Swiss Breast Cancer Patients Treated with Letrozole, Tamoxifen and Sequences of Letrozole and Tamoxifen in the BIG 1-98 Study (SAKK 21/07).

Background: Bone health is a concern when treating early stage breast cancer patients with adjuvant aromatase inhibitors. Early detection of patients (pts) at risk of osteoporosis and fractures may be helpful for starting preventive therapies and selecting the most appropriate endocrine therapy schedule. We present statistical models describing the evolution of lumbar and hip bone mineral density (BMD) in pts treated with tamoxifen (T), letrozole (L) and sequences of T and L. Methods: Available dual-energy x-ray absorptiometry exams (DXA) of pts treated in trial BIG 1-98 were retrospectively collected from Swiss centers. Treatment arms: A) T for 5 years, B) L for 5 years, C) 2 years of T followed by 3 years of L and, D) 2 years of L followed by 3 years of T. Pts without DXA were used as a control for detecting selection biases. Patients randomized to arm A were subsequently allowed an unplanned switch from T to L. Allowing for variations between DXA machines and centres, two repeated measures models, using a covariance structure that allow for different times between DXA, were used to estimate changes in hip and lumbar BMD (g/cm2) from trial randomization. Prospectively defined covariates, considered as fixed effects in the multivariable models in an intention to treat analysis, at the time of trial randomization were: age, height, weight, hysterectomy, race, known osteoporosis, tobacco use, prior bone fracture, prior hormone replacement therapy (HRT), bisphosphonate use and previous neo-/adjuvant chemotherapy (ChT). Similarly, the T-scores for lumbar and hip BMD measurements were modeled using a per-protocol approach (allowing for treatment switch in arm A), specifically studying the effect of each therapy upon T-score percentage. Results: A total of 247 out of 546 pts had between 1 and 5 DXA; a total of 576 DXA were collected. Number of DXA measurements per arm were; arm A 133, B 137, C 141 and D 135. The median follow-up time was 5.8 years. Significant factors positively correlated with lumbar and hip BMD in the multivariate analysis were weight, previous HRT use, neo-/adjuvant ChT, hysterectomy and height. Significant negatively correlated factors in the models were osteoporosis, treatment arm (B/C/D vs. A), time since endocrine therapy start, age and smoking (current vs. never).Modeling the T-score percentage, differences from T to L were -4.199% (p = 0.036) and -4.907% (p = 0.025) for the hip and lumbar measurements respectively, before any treatment switch occurred. Conclusions: Our statistical models describe the lumbar and hip BMD evolution for pts treated with L and/or T. The results of both localisations confirm that, contrary to expectation, the sequential schedules do not seem less detrimental for the BMD than L monotherapy. The estimated difference in BMD T-score percent is at least 4% from T to L.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Prevalence and determinants of obesity in children in public schools of Sintra, Portugal

OBJECTIVE: To assess the prevalence of and the factors related to overweight and obesity in a sample of children from the region of Sintra, Portugal. METHODS AND PROCEDURES: Cross-sectional study, stratified for freguesia with random selection of schools. Height, weight, triceps skinfold, upper arm and waist circumferences were measured, and overweight/obesity defined according to international criteria. Breast-feeding, number of daily meals and parents' height and weight data were also collected. RESULTS: One thousand two hundred and twenty-five children aged 6-10 years were assessed. Overall prevalence of overweight and obesity was 35.6% (23% overweight and 12.6% obesity). Overweight or obese children had higher triceps skinfold, upper arm circumference, arm muscle area, and waist circumference than their normal weight counterparts (P < 0.001). On multivariate analysis, relatively to a child without obese progenitors, a child with one obese progenitor had an obesity risk multiplied by 2.78 (95% confidence interval (CI): 1.76-4.38), while a child with two obese progenitors had a risk multiplied by 6.47 (95% CI: 5.59-16.19). Conversely, being picky was significantly related with a smaller risk of obesity: for boys, odds ratio (OR) = 0.15 (95% CI: 0.04-0.63); for girls, OR = 0.19 (95% CI: 0.06-0.64). Finally, no relationships were found between obesity, birth weight, birth height or breast-feeding. DISCUSSION: Prevalence of overweight and obesity are elevated among children of the Sintra region in Portugal compared to most other regions of Europe. The relationship with the parents' nutritional state stresses the need to target families for preventing obesity.

Mitomycin C with continuous fluorouracil or with cisplatin in combination with radiotherapy for locally advanced anal cancer (European Organisation for Research and Treatment of Cancer phase II study 22011-40014).

PURPOSE: To assess the feasibility and activity of radio-chemotherapy with mitomycin C (MMC) and cisplatin (CDDP) in locally advanced squamous cell anal carcinoma with reference to radiotherapy (RT) combined with MMC and fluorouracil (5-FU). PATIENTS AND METHODS: Patients with measurable disease >4 cmN0 or N+ received RT (36Gy+2 week gap+23.4Gy) with either MMC/CDDP or MMC/5-FU (MMC 10mg/m(2) d1 of each sequence; 5-FU 200mg/m(2)/day c.i.v. daily; CDDP 25mg/m(2) weekly). Forty patients/arm were needed to exclude a RECIST objective response rate (ORR), 8 weeks after treatment, of <75% (Fleming 1, alpha=10%, beta=10%). RESULTS: The ORR was 79.5% (31/39) (lower bound confidence interval [CI]: 68.8%) with MMC/5-FU versus 91.9% (34/ 37) (lower bound CI: 82.8%) with MMC/CDDP. In the MMC/5-FU group, two patients (5.1%) discontinued treatment due to toxicity versus 11 (29.7%) in the MMC/CDDP group. Nine grade 3 haematological events occurred with MMC/CDDP versus none with 5-FU/MMC. The rate of other toxicities did not differ. There was no toxic death. Thirty-one patients in the MMC/5-FU arm (79.5%) and 18 in the MMC/CDDP arm (48.6%) were fully compliant with the protocol treatment (p=0.005). CONCLUSIONS: Radio-chemotherapy with MMC/CDDP seems promising as only MMC/CDDP demonstrated enough activity (RECIST ORR >75%) to be tested further in phase III trials; MMC/5-FU did not. MMC/CDDP also had an overall acceptable toxicity profile.

L'attribution d'un bien à cause de mort, en particulier à une valeur déterminée

Problématique à résoudre Le difficile pari pour tout individu n'est pas tant de réussir sa vie, mais de s'assurer qu'une fois parti, il permettra à ses proches de poursuivre leur propre existence dans une certaine sérénité et avec le seul souvenir des bons moments passés ensemble. Après le choc de la perte de l'être cher, les aléas d'une succession mal réglée ou la découverte d'un testament inconnu auront tôt fait de ternir l'image du défunt et de mettre en lumière les conflits de famille latents. Que l'on ne se fasse aucune illusion, on règle le partage de sa succession comme on a mené sa vie. La répartition de ses biens par le disposant ou le partage ultérieur de ceux-ci après son décès par les héritiers eux-mêmes, voire, en cas de mésentente, par l'autorité judiciaire, sont des opérations particulièrement douloureuses, non pas tant en raison de la valeur économique que ces biens peuvent représenter pour les héritiers, qu'en raison de leur valeur sentimentale. Si le de cujus souhaite, dans la mesure du possible, éviter tout conflit, il peut décider d'organiser lui-même le partage de sa succession en attribuant directement ses biens à ses héritiers. Mais lorsqu'il procède ainsi, quelle catégorie de dispositions à cause de mort prend-il? Règle de partage, legs, institution d'héritier, ou encore charge? Et si, par surcroît, il détermine la valeur à laquelle il entend attribuer un bien, influence-t-il la nature de la disposition prise? C'est particulièrement à cette seconde question que nous entendons répondre, mais pour ce faire, il est indispensable de débuter ce travail par la qualification de l'attribution d'un bien en tant que tel. Notre étude est divisée en deux parties : la première permettra de présenter les différentes lectures juridiques possibles des attributions de biens que tout individu peut faire à ses héritiers légaux ou à des tiers auxquels il souhaite transmettre une partie de son patrimoine; la seconde s'attachera à déterminer quelles sont les conséquences éventuelles d'une estimation de ses biens par le disposant sur les qualifications juridiques retenues. Souvent en effet, le de cujus ne se limite pas à prévoir à qui doit revenir tel ou tel bien, mais fixe également la valeur de reprise de ce bien.

Efficacy and safety of a phospholipid emulsion (GR270773) in Gram-negative severe sepsis: results of a phase II multicenter, randomized, placebo-controlled, dose-finding clinical trial.

OBJECTIVE: To assess the survival benefit and safety profile of low-dose (850 mg/kg) and high-dose (1350 mg/kg) phospholipid emulsion vs. placebo administered as a continuous 3-day infusion in patients with confirmed or suspected Gram-negative severe sepsis. Preclinical and ex vivo studies show that lipoproteins bind and neutralize endotoxin, and experimental animal studies demonstrate protection from septic death when lipoproteins are administered. Endotoxin neutralization correlates with the amount of phospholipid in the lipoprotein particles. DESIGN: A three-arm, randomized, blinded, placebo-controlled trial. SETTING: Conducted at 235 centers worldwide between September 2004 and April 2006. PATIENTS: A total of 1379 patients participated in the study, 598 patients received low-dose phospholipid emulsion, and 599 patients received placebo. The high-dose phospholipid emulsion arm was stopped, on the recommendation of the Independent Data Monitoring Committee, due to an increase in life-threatening serious adverse events at the fourth interim analysis and included 182 patients. MEASUREMENTS AND MAIN RESULTS: A 28-day all-cause mortality and new-onset organ failure. There was no significant treatment benefit for low- or high-dose phospholipid emulsion vs. placebo for 28-day all-cause mortality, with rates of 25.8% (p = .329), 31.3% (p = .879), and 26.9%, respectively. The rate of new-onset organ failure was not statistically different among groups at 26.3%, 31.3%, 20.4% with low- and high-dose phospholipid emulsion, and placebo, respectively (one-sided p = .992, low vs. placebo; p = .999, high vs. placebo). Of the subjects treated, 45% had microbiologically confirmed Gram-negative infections. Maximal changes in mean hemoglobin levels were reached on day 10 (-1.04 g/dL) and day 5 (-1.36 g/dL) with low- and high-dose phospholipid emulsion, respectively, and on day 14 (-0.82 g/dL) with placebo. CONCLUSIONS: Treatment with phospholipid emulsion did not reduce 28-day all-cause mortality, or reduce the onset of new organ failure in patients with suspected or confirmed Gram-negative severe sepsis.

Collection de copies de pièces sur l'histoire de France, formée par François DE CAMPS, abbé de Signy (1723). II PROVINCES. 57 Lyon et Lyonnais.

« De la souveraineté des rois de France sur la ville et le comté de Lion » (fol. 2, 93, 120) : pièces justificatives, 942-1320 (132, 183). — Lettre critique sur l'Histoire civile ou consulaire de la ville de Lyon du P. Menestrier (90). — Primatie de Lyon (186). Extraits « ex cartulario episcopatus Diensis, quod est conventus fratrum Minimorum Parisiensium, » 1158-1229 (193). Diplômes de l'empereur Frédéric II, copies extraites des archives du Domaine royal en Languedoc, arm. B (196). Inventaire des chartes du Trésor relatives au Lyonnais (218).

Wear of two denture teeth materials in vivo-2-year results.

OBJECTIVE: (1) To quantify wear of two different denture tooth materials in vivo with two study designs, (2) to relate tooth variables to vertical loss. METHODS: Two different denture tooth materials had been used (experimental material=test; DCL=control). In study 1 (split-mouth, 6 test centers) 60 subjects received complete dentures, in study 2 (two-arm, 1 test center) 29 subjects. In study 1 the mandibular dentures were supported by implants in 33% of the subjects, in study 2 only in 3% of the subjects. Impressions of the dentures were taken and poured with improved stone at baseline and after 6, 12, 18 and 24 months. Each operator evaluated the wear subjectively. Wear analysis was carried out with a laser scanning device. Maximal vertical loss of the attrition zones was calculated for each tooth cusp and tooth. A mixed linear model was used to statistically analyse the logarithmically transformed wear data. RESULTS: Due to drop-outs and unmatchable casts, only 47 subjects of study 1 and 14 of study 2 completed the 2-year recall. Overall, 75% of all teeth present could be analysed. There was no statistically difference in the overall wear between the test and control material for either study 1 or study 2. The relative increase in wear over time was similar in both study designs. However, a strong subject effect and center effect were observed. The fixed factors included in the model (time, tooth, center, etc.) accounted for 43% of the variability, whereas the random subject effect accounted for another 30% of the variability, leaving about 28% of unexplained variability. More wear was consistently recorded in the maxillary teeth compared to the mandibular teeth and in the first molar teeth compared to the premolar teeth and the second molars. Likewise, the supporting cusps showed more wear than the non-supporting cusps. The amount of wear did not depend on whether or not the lower dentures were supported by implants. The subjective wear was correct in about 67% of the cases if it is postulated that a wear difference of 100μm should be subjectively detectable. SIGNIFICANCE: The clinical wear of denture teeth is highly variable with a strong patient effect. More wear can be expected in maxillary denture teeth compared to mandibular teeth, first molars compared to premolars and supported cusps compared to non-supported cusps. Laboratory data on the wear of denture tooth materials may not be confirmed in well-structured clinical trials probably due to the large inter-individual variability.

Randomized controlled study demonstrating failure of LPV/r monotherapy in HIV: the role of compartment and CD4-nadir.

BACKGROUND: Long-term side-effects and cost of HIV treatment motivate the development of simplified maintenance. Monotherapy with ritonavir-boosted lopinavir (LPV/r-MT) is the most widely studied strategy. However, efficacy of LPV/r-MT in compartments remains to be shown. METHODS: Randomized controlled open-label trial comparing LPV/r-MT with continued treatment for 48 weeks in treated patients with fully suppressed viral load. The primary endpoint was treatment failure in the central nervous system [cerebrospinal fluid (CSF)] and/or genital tract. Treatment failure in blood was defined as two consecutive HIV RNA levels more than 400 copies/ml. RESULTS: The trial was prematurely stopped when six patients on monotherapy (none in continued treatment-arm) demonstrated a viral failure in blood. At study termination, 60 patients were included, 29 randomized to monotherapy and 13 additional patients switched from continued treatment to monotherapy after 48 weeks. All failures occurred in patients with a nadir CD4 cell count below 200/microl and within the first 24 weeks of monotherapy. Among failing patients, all five patients with a lumbar puncture had an elevated HIV RNA load in CSF and four of six had neurological symptoms. Viral load was fully resuppressed in all failing patients after resumption of the original combination therapy. No drug resistant virus was found. The only predictor of failure was low nadir CD4 cell count (P < 0.02). CONCLUSION: Maintenance of HIV therapy with LPV/r alone should not be recommended as a standard strategy; particularly not in patients with a CD4 cell count nadir less than 200/microl. Further studies are warranted to elucidate the role of the central nervous system compartment in monotherapy-failure.

Shoulder pathology: estimating dominant upper-limb activity using 3D kinematic sensors.

Introduction. Quantification of daily upper-limb activity is a key determinant in evaluation of shoulder surgery. For a number of shoulder diseases, problem in performing daily activities have been expressed in terms of upper-limb usage and non-usage. Many instruments measure upper-limb movement but do not focus on the differentiations between the use of left or right shoulder. Several methods have been used to measure it using only accelerometers, pressure sensors or video-based analysis. However, there is no standard or widely used objective measure for upper-limb movement. We report here on an objective method to measure the movement of upper-limb and we examined the use of 3D accelerometers and 3D gyroscopes for that purpose. Methods. We studied 8 subjects with unilateral pathological shoulder (8 rotator cuff disease: 53 years old ± 8) and compared them to 18 control subjects (10 right handed, 8 left handed: 32 years old ± 8, younger than the patient group to be almost sure they don_t have any unrecognized shoulder pathology). The Simple Shoulder Test (SST) and Disabilities of the Arm and Shoulder Score (DASH) questionnaires were completed by each subject. Two modules with 3 miniature capacitive gyroscopes and 3 miniature accelerometers were fixed by a patch on the dorsal side of the distal humerus, and one module with 3 gyroscopes and 3 accelerometers were fixed on the thorax. The subject wore the system during one day (8 hours), at home or wherever he/she went. We used a technique based on the 3D acceleration and the 3D angular velocities from the modules attached on the humerus. Results. As expected, we observed that for the stand and sit postures the right side is more used than the left side for a healthy right-handed person(idem on the left side for a healthy left-handed person). Subjects used their dominant upper-limb 18% more than the non-dominant upper-limb. The measurements on patients in daily life have shown that the patient has used more his non affected and non dominant side during daily activity if the dominant side = affected shoulder. If the dominant side affected shoulder, the difference can be showed only during walking period. Discussion-Conclusion. The technique developed and used allowed the quantification of the difference between dominant and non dominant side, affected and unaffected upper-limb activity. These results were encouraging for future evaluation of patients with shoulder injuries, before and after surgery. The feasibility and patient acceptability of the method using body fixed sensors for ambulatory evaluation of upper limbs kinematics was shown.

Infrainguinal bypass for peripheral arterial occlusive disease: when arms save legs.

OBJECTIVES: Determine if arm veins are good conduits for infrainguinal revascularisation and should be used when good quality saphenous vein is not available. DESIGN: Retrospective study. MATERIALS AND METHODS: We evaluated a consecutive series of infrainguinal bypass (IB) using arm vein conduits from March 2001 to December 2006.We selected arm vein by preoperative ultrasound mapping to identify suitable veins. We measured vein diameter and assessed vein wall quality. We followed patients with systematic duplex imaging at 1 week, 1, 3, 6 and 12 months, and annually thereafter. We treated significative stenoses found during the follow-up. RESULTS: We performed 56 infrainguinal revascularisation using arm vein conduits in 56 patients. Primary patency rates at 1, 2 and 3 years were 65%, 51% and 47%. Primary assisted patencies at 1, 2 and 3 years were 96%, 96% and 82%. Secondary patency rates at 1, 2 and 3 years were 92%, 88% and 88%. The three-year limb salvage rate was 88%. CONCLUSIONS: We conclude that infrainguinal bypass using arm vein for conduits gives good patency rates, if selected by a preoperative US mapping to use the best autogenous conduit available.

Distal trisomy 14 (q24 --> qter) and aorto-pulmonary window: a case report and review of the literature.

A newborn female with partial trisomy for the distal part of the long arm of the chromosome 14 (14q24 --> qter) resulting from a paternal balanced translocation (3;14) is described. We compare her phenotype with eight other individuals with trisomy 14q24 --> qter.

Emergence du mobbing: personnalités perverses ou effets de l'organisation du travail?

La question du harcèlement psychologique, ou mobbing, constitue aujourd'hui une préoccupation importante s'agissant de la santé au travail. Cet article veut engager une réflexion sur les conditions d'émergence du phénomène de mobbing et sur les interprétations qui lui sont données. Alors que des auteurs comme Hirigoyen et Leyman développent le point de vue selon lequel le mobbing est l'effet de personnalités perverses, cet article soutient un point de vue différent, selon lequel le mobbing est en réalité étroitement lié aux nouvelles modalités d'organisation et aux rapports de travail, indépendamment de la présence de personnalités déviantes. L'article décrit les formes d'organisation qui, tout en cassant les anciennes solidarités, poussent à un engagement individualisé dans le projet de l'entreprise. Ceci place les salariés dans des contradictions dont ils sortent en développant des stratégies de survie et d'évitement du conflit, dont le mobbing est l'une des expressions. [Auteurs]