Continuum sea ice rheology determined from subcontinuum mechanics

[1] A method is presented to calculate the continuum-scale sea ice stress as an imposed, continuum-scale strain-rate is varied. The continuum-scale stress is calculated as the area-average of the stresses within the floes and leads in a region (the continuum element). The continuum-scale stress depends upon: the imposed strain rate; the subcontinuum scale, material rheology of sea ice; the chosen configuration of sea ice floes and leads; and a prescribed rule for determining the motion of the floes in response to the continuum-scale strain-rate. We calculated plastic yield curves and flow rules associated with subcontinuum scale, material sea ice rheologies with elliptic, linear and modified Coulombic elliptic plastic yield curves, and with square, diamond and irregular, convex polygon-shaped floes. For the case of a tiling of square floes, only for particular orientations of the leads have the principal axes of strain rate and calculated continuum-scale sea ice stress aligned, and these have been investigated analytically. The ensemble average of calculated sea ice stress for square floes with uniform orientation with respect to the principal axes of strain rate yielded alignment of average stress and strain-rate principal axes and an isotropic, continuum-scale sea ice rheology. We present a lemon-shaped yield curve with normal flow rule, derived from ensemble averages of sea ice stress, suitable for direct inclusion into the current generation of sea ice models. This continuum-scale sea ice rheology directly relates the size (strength) of the continuum-scale yield curve to the material compressive strength.

No Haus Like Bau

The project consists of a live performance taking the 2005 IKEA riot as the starting point for a speculative history of a fictional future, culminating in a choreographed re-enactment of the original event. It is accompanied by a film series explores the possibility of collective action emerging from the capitalist relations inherent in the consumer riot. The performance, staged at the Berlin Biennale, continues this research into re-enactment and post-1989 politics, using a stage set made of flatpack furniture. Using the aesthetics of Modernism and the avant garde, the project transposes early twentieth century utopian ideology to a present day setting where mass uprisings are motivated by cheap commodities. By re-evaluating biomechanics and Bauhaus theatre theory, these explorations of consumerism and revolution propose that the mechanized movement developed in conjunction with industrial labour survives as a historical re-enactment in the wake of manufacturing work in the west. In the absence of a visual language apt to the contemporary, No Haus Like Bau uses re-enactment as a retrogarde tactic. Its purpose on the one hand is to invoke trajectories for alternate futures that never materialized at an originary moment. On the other hand, the clash of past forms with present content serves to accentuate the historical changes that have thrown into question these forms. Rather than reflecting the present, the projection of the past into a fictional future aims to destabilize the dominant narrative that suggests the current configuration of art, politics and human nature has always been this way. The project has been widely exhibited internationally and supported by Film London and Arts Council England. A theoretical essay on re-enactment as a strategy for performance has been published in Art Papers and in Memory [MIT]. The project also formed the basis of a solo exhibition at Te Tuhi Art Centre, Auckland.

Ventilation performance in a passage between two non-parallel buildings

A great number of studies on wind conditions in passages between slab-type buildings have been conducted in the past. However, wind conditions under different structure and configuration of buildings is still unclear and studies existed still can’t provide guidance on urban planning and design, due to the complexity of buildings and aerodynamics. The aim of this paper is to provide more insight in the mechanism of wind conditions in passages. In this paper, a simplified passage model with non-parallel buildings is developed on the basis of the wind tunnel experiments conducted by Blocken et al. (2008). Numerical simulation based on CFD is employed for a detailed investigation of the wind environment in passages between two long narrow buildings with different directions and model validation is performed by comparing numerical results with corresponding wind tunnel measurements.

MetUM-GOML: a near-globally coupled atmosphere–ocean-mixed-layer model

Well-resolved air–sea interactions are simulated in a new ocean mixed-layer, coupled configuration of the Met Office Unified Model (MetUM-GOML), comprising the MetUM coupled to the Multi-Column K Profile Parameterization ocean (MC-KPP). This is the first globally coupled system which provides a vertically resolved, high near-surface resolution ocean at comparable computational cost to running in atmosphere-only mode. As well as being computationally inexpensive, this modelling framework is adaptable– the independent MC-KPP columns can be applied selectively in space and time – and controllable – by using temperature and salinity corrections the model can be constrained to any ocean state. The framework provides a powerful research tool for process-based studies of the impact of air–sea interactions in the global climate system. MetUM simulations have been performed which separate the impact of introducing inter- annual variability in sea surface temperatures (SSTs) from the impact of having atmosphere–ocean feedbacks. The representation of key aspects of tropical and extratropical variability are used to assess the performance of these simulations. Coupling the MetUM to MC-KPP is shown, for example, to reduce tropical precipitation biases, improve the propagation of, and spectral power associated with, the Madden–Julian Oscillation and produce closer-to-observed patterns of springtime blocking activity over the Euro-Atlantic region.

The Met Office Unified Model Global Atmosphere 3.0/3.1 and JULES Global Land 3.0/3.1 configurations

We describe Global Atmosphere 3.0 (GA3.0): a configuration of the Met Office Unified Model (MetUM) developed for use across climate research and weather prediction activities. GA3.0 has been formulated by converging the development paths of the Met Office's weather and climate global atmospheric model components such that wherever possible, atmospheric processes are modelled or parametrized seamlessly across spatial resolutions and timescales. This unified development process will provide the Met Office and its collaborators with regular releases of a configuration that has been evaluated, and can hence be applied, over a variety of modelling régimes. We also describe Global Land 3.0 (GL3.0): a configuration of the JULES community land surface model developed for use with GA3.0.

The relationship between L3 transfer and structural similarity across L3 development: raising across an experience in Brazilian Portuguese

The present study examines three competing models of morphosyntactic transfer in third language (L3) acquisition, examining the particular domain of the feature configuration of embedded T in L3 Brazilian Portuguese (BP) at the initial stages and then through development. The methodology alternates Spanish and English as the L1 and L2 to tease apart the source of transfer to L3 BP. Results from a scalar grammaticality acceptability task show unequivocal transfer of Spanish irrespective of Spanish’s status as an L1 or L2. The data thus support the Typological Primacy Model (Rothman 2010, 2011, 2013a, 2013b), which proposes that multilingual transfer is selected by factors related to comparative structural similarity. Given that Spanish transfer at the L3 initial stages creates the need for feature reconfiguration to converge on the target BP grammar, the second part of this chapter examines the developmental consequences of what the TPM models in cases of non-facilitative initial transfer, that is, the developmental path of feature reconfiguration of embedded T in L3 BP by English/Spanish bilinguals. Given what these data reveal, we address the role of regressive transfer as a correlate of L3 proficiency gains.

Recurrence and higher ergodic properties for quenched random Lorentz tubes in dimension bigger than two

We consider the billiard dynamics in a non-compact set of ℝ d that is constructed as a bi-infinite chain of translated copies of the same d-dimensional polytope. A random configuration of semi-dispersing scatterers is placed in each copy. The ensemble of dynamical systems thus defined, one for each global realization of the scatterers, is called quenched random Lorentz tube. Under some fairly general conditions, we prove that every system in the ensemble is hyperbolic and almost every system is recurrent, ergodic, and enjoys some higher chaotic properties.

Recurrence for quenched random Lorentz tubes

We consider the billiard dynamics in a striplike set that is tessellated by countably many translated copies of the same polygon. A random configuration of semidispersing scatterers is placed in each copy. The ensemble of dynamical systems thus defined, one for each global choice of scatterers, is called quenched random Lorentz tube. We prove that under general conditions, almost every system in the ensemble is recurrent.

Different strategies for improving summer thermal comfort in heavyweight traditional buildings

In order to exploit the passive energy potential of the building envelope, it is important to provide a right combination of insulation thickness, heat capacity and night-time ventilation. In this paper, this issue will be tackled with reference to an historic building in Catania (Southern Italy). The building was built at the end of the XIX century, and its opaque envelope is entirely made with lava stones, which is typical of traditional architecture in this area. Starting from the current configuration of the building, many hypotheses for refurbishment are considered, combined with different strategies for passive cooling, such as night-time ventilation, use of shading devices and adoption of highly-reflective coatings. The effectiveness of each solution in terms of summer thermal comfort is evaluated through dynamic thermal simulations carried out with EnergyPlus. The results show the synergic effect of these strategies, as well as their individual impact, and allow to draw some general conclusions about the behaviour of heavyweight buildings under moderately hot weather conditions.

Using laboratory and field measurements to constrain a single habit shortwave optical parameterization for cirrus

A single habit parameterization for the shortwave optical properties of cirrus is presented. The parameterization utilizes a hollow particle geometry, with stepped internal cavities as identified in laboratory and field studies. This particular habit was chosen as both experimental and theoretical results show that the particle exhibits lower asymmetry parameters when compared to solid crystals of the same aspect ratio. The aspect ratio of the particle was varied as a function of maximum dimension, D, in order to adhere to the same physical relationships assumed in the microphysical scheme in a configuration of the Met Office atmosphere-only global model, concerning particle mass, size and effective density. Single scattering properties were then computed using T-Matrix, Ray Tracing with Diffraction on Facets (RTDF) and Ray Tracing (RT) for small, medium, and large size parameters respectively. The scattering properties were integrated over 28 particle size distributions as used in the microphysical scheme. The fits were then parameterized as simple functions of Ice Water Content (IWC) for 6 shortwave bands. The parameterization was implemented into the GA6 configuration of the Met Office Unified Model along with the current operational long-wave parameterization. The GA6 configuration is used to simulate the annual twenty-year short-wave (SW) fluxes at top-of-atmosphere (TOA) and also the temperature and humidity structure of the atmosphere. The parameterization presented here is compared against the current operational model and a more recent habit mixture model.

Combining structure and dynamics: non-denaturing high-pressure effect on lysozyme in solution

Small-angle X-ray scattering (SAXS) and elastic and quasi-elastic neutron scattering techniques were used to investigate the high-pressure-induced changes on interactions, the low-resolution structure and the dynamics of lysozyme in solution. SAXS data, analysed using a global-fit procedure based on a new approach for hydrated protein form factor description, indicate that lysozyme completely maintains its globular structure up to 1500 bar, but significant modi. cations in the protein-protein interaction potential occur at approximately 600-1000 bar. Moreover, the mass density of the protein hydration water shows a clear discontinuity within this pressure range. Neutron scattering experiments indicate that the global and the local lysozyme dynamics change at a similar threshold pressure. A clear evolution of the internal protein dynamics from diffusing to more localized motions has also been probed. Protein structure and dynamics results have then been discussed in the context of protein-water interface and hydration water dynamics. According to SAXS results, the new configuration of water in the first hydration layer induced by pressure is suggested to be at the origin of the observed local mobility changes.

Magnetic hysteresis loop shift in NiFe(2)O(4) nanocrystalline powder with large grain boundary fraction

Magnetic properties of nanocrystalline NiFe(2)O(4) spinel mechanically processed for 350 h have been studied using temperature dependent from both zero-field and in-field (57)Fe Mossbauer spectrometry and magnetization measurements. The hyperfine structure allows us to distinguish two main magnetic contributions: one attributed to the crystalline grain core, which has magnetic properties similar to the NiFe(2)O(4) spinel-like structure (n-NiFe(2)O(4)) and the other one due to the disordered grain boundary region, which presents topological and chemical disorder features(d-NiFe(2)O(4)). Mossbauer spectrometry determines a large fraction for the d-NiFe(2)O(4) region(62% of total area) and also suggests a speromagnet-like structure for it. Under applied magnetic field, the n-NiFe(2)O(4) spins are canted with angle dependent on the applied field magnitude. Mossbauer data also show that even under 120 kOe no magnetic saturation is observed for the two magnetic phases. In addition, the hysteresis loops, recorded for scan field of 50 kOe, are shifted in both field and magnetization axes, for temperatures below about 50 K. The hysteresis loop shifts may be due to two main contributions: the exchange bias field at the d-NiFe(2)O(4)/n-NiFe(2)O(4) interfaces and the minor loop effect caused by a high magnetic anisotropy of the d-NiFe(2)O(4) phase. It has also been shown that the spin configuration of the spin-glass like phase is modified by the consecutive field cycles, consequently the n-NiFe(2)O(4)/d-NiFe(2)O(4) magnetic interaction is also affected in this process. (C) 2010 Elsevier B.V. All rights reserved.

Fermion perturbations in string theory black holes

In this paper we study fermion perturbations in four-dimensional black holes of string theory, obtained either from a non-extreme configuration of three intersecting five-branes with a boost along the common string or from a non-extreme intersecting system of two two-branes and two five-branes. The Dirac equation for the massless neutrino field, after conformal re-scaling of the metric, is written as a wave equation suitable to study the time evolution of the perturbation. We perform a numerical integration of the evolution equation, and with the aid of Prony fitting of the time-domain profile, we calculate the complex frequencies that dominate the quasinormal ringing stage, and also determine these quantities by the semi-analytical sixth-order WKB method. We also find numerically the decay factor of fermion fields at very late times, and show that the falloff is identical to those showing for massless fields in other four-dimensional black hole spacetimes.

THE RIO APA CRATON IN MATO GROSSO DO SUL (BRAZIL) AND NORTHERN PARAGUAY: GEOCHRONOLOGICAL EVOLUTION, CORRELATIONS AND TECTONIC IMPLICATIONS FOR RODINIA AND GONDWANA

The Rio Apa cratonic fragment crops out in Mato Grosso do Sul State of Brazil and in northeastern Paraguay. It comprises Paleo-Mesoproterozoic medium grade metamorphic rocks, intruded by granitic rocks, and is covered by the Neoproterozoic deposits of the Corumbi and Itapocurni Groups. Eastward it is bound by the southern portion of the Paraguay belt. In this work, more than 100 isotopic determinations, including U-Pb SHRIMP zircon ages, Rb-Sr and Sm-Nd whole-rock determinations, as well as K-Ar and Ar-Ar mineral ages, were reassessed in order to obtain a complete picture of its regional geological history. The tectonic evolution of the Rio Apa Craton starts with the formation of a series of magmatic arc complexes. The oldest U-Pb SHRIMP zircon age comes from a banded gneiss collected in the northern part of the region, with an age of 1950 +/- 23 Ma. The large granitic intrusion of the Alumiador Batholith yielded a U-Pb zircon age of 1839 +/- 33 Ma, and from the southeastern part of the area two orthogneisses gave zircon U-Pb ages of 1774 +/- 26 Ma and 1721 +/- 25 Ma. These may be coeval with the Alto Terere metamorphic rocks of the northeastern corner, intruded in their turn by the Baia das Garcas granitic rocks, one of them yielding a zircon U-Pb age of 1754 +/- 49 Ma. The original magmatic protoliths of these rocks involved some crustal component, as indicated by the Sm-Nd TDm model ages, between 1.9 and 2.5 Ga. Regional Sr isotopic homogenization, associated with tectonic deformation and medium-grade metamorphism occurred at approximately 1670 Ma, as suggested by Rb-Sr whole rock reference isochrons. Finally, at 1300 Ma ago, the Ar work indicates that the Rio Apa Craton was affected by widespread regional heating, when the temperature probably exceeded 350 degrees C. Geographic distribution, age and isotopic signature of the fithotectonic units suggest the existence of a major suture separating two different tectonic domains, juxtaposed at about 1670 Ma. From that time on, the unified Rio Apa continental block behaved as one coherent and stable tectonic unit. It correlates well with the SW corner of the Amazonian Craton, where the medium-grade rocks of the Juruena-Rio Negro tectonic province, with ages between 1600 and 1780 Ma, were reworked at about 1300 Ma. Looking at the largest scale, the Rio Apa Craton is probably attached to the larger Amazonian Craton, and the actual configuration of southwestern South America is possibly due to a complex arrangement of allochthonous blocks such as the Arequipa, Antofalla and Pampia, with different sizes, that may have originated as disrupted parts of either Laurentia or Amazonia, and were trapped during later collisions of these continental masses.

Dihydroisocoumarin from Xyris pterygoblephara active against dermatophyte fungi

The ethanol extract from Xyris pteygoblephara aerial parts was evaluated against five microorganism strains, by the microdilution and agar diffusion methods. Extract fractionation led to the isolation of three compounds, whose structures were assigned by spectrometric data (113 and 2D NMR, IR, MS and UV) as (3R,4R)-(-)-6-methoxy-3,4-dihydro-3-n-pentil-4-acethoxy-1H-2-benzopyran-1-one (1), moronic acid and quercetin. The absolute configuration of I was defined by circular dichroism spectroscopy and comparison with data reported for other dihydroisocoumarins. Assay of 1 (100 mu g/disc) by the agar diffusion method against clinical isolates of the dermatophytes Epidermophyton floccosum (inhibition zone, mm +/- s.d.: 4.5 +/- 0.8), Trichophyton mentagrophytes (4.8 +/- 0.4) and Trichophyton rubrum (10.2 +/- 0.8) revealed similar inhibition zones to the positive control amphotericin B (32 mu g/disc; 5.0 +/- 0.2; 5.0 +/- 0.6 and 8.8 +/- 1.2, respectively). The result corroborates the ethnomedical use of Xyris species to treat dermatitis. (C) 2007 Elsevier Ltd. All rights reserved.