The underestimation of compliance to direct help requests explained by adaptive sampling

Helping behavior is any intentional behavior that benefits another living being or group (Hogg & Vaughan, 2010). People tend to underestimate the probability that others will comply with their direct requests for help (Flynn & Lake, 2008). This implies that when they need help, they will assess the probability of getting it (De Paulo, 1982, cited in Flynn & Lake, 2008) and then they will tend to estimate one that is actually lower than the real chance, so they may not even consider worth asking for it. Existing explanations for this phenomenon attribute it to a mistaken cost computation by the help seeker, who will emphasize the instrumental cost of “saying yes”, ignoring that the potential helper also needs to take into account the social cost of saying “no”. And the truth is that, especially in face-to-face interactions, the discomfort caused by refusing to help can be very high. In short, help seekers tend to fail to realize that it might be more costly to refuse to comply with a help request rather than accepting. A similar effect has been observed when estimating trustworthiness of people. Fetchenhauer and Dunning (2010) showed that people also tend to underestimate it. This bias is reduced when, instead of asymmetric feedback (getting feedback only when deciding to trust the other person), symmetric feedback (always given) was provided. This cause could as well be applicable to help seeking as people only receive feedback when they actually make their request but not otherwise. Fazio, Shook, and Eiser (2004) studied something that could be reinforcing these outcomes: Learning asymmetries. By means of a computer game called BeanFest, they showed that people learn better about negatively valenced objects (beans in this case) than about positively valenced ones. This learning asymmetry esteemed from “information gain being contingent on approach behavior” (p. 293), which could be identified with what Fetchenhauer and Dunning mention as ‘asymmetric feedback’, and hence also with help requests. Fazio et al. also found a generalization asymmetry in favor of negative attitudes versus positive ones. They attributed it to a negativity bias that “weights resemblance to a known negative more heavily than resemblance to a positive” (p. 300). Applied to help seeking scenarios, this would mean that when facing an unknown situation, people would tend to generalize and infer that is more likely that they get a negative rather than a positive outcome from it, so, along with what it was said before, people will be more inclined to think that they will get a “no” when requesting help. Denrell and Le Mens (2011) present a different perspective when trying to explain judgment biases in general. They deviate from the classical inappropriate information processing (depicted among other by Fiske & Taylor, 2007, and Tversky & Kahneman, 1974) and explain this in terms of ‘adaptive sampling’. Adaptive sampling is a sampling mechanism in which the selection of sample items is conditioned by the values of the variable of interest previously observed (Thompson, 2011). Sampling adaptively allows individuals to safeguard themselves from experiences they went through once and turned out to lay negative outcomes. However, it also prevents them from giving a second chance to those experiences to get an updated outcome that could maybe turn into a positive one, a more positive one, or just one that regresses to the mean, whatever direction that implies. That, as Denrell and Le Mens (2011) explained, makes sense: If you go to a restaurant, and you did not like the food, you do not choose that restaurant again. This is what we think could be happening when asking for help: When we get a “no”, we stop asking. And here, we want to provide a complementary explanation for the underestimation of the probability that others comply with our direct help requests based on adaptive sampling. First, we will develop and explain a model that represents the theory. Later on, we will test it empirically by means of experiments, and will elaborate on the analysis of its results.

quantiNemo: an individual-based program to simulate quantitative traits with explicit genetic architecture in a dynamic metapopulation.

quantiNemo is an individual-based, genetically explicit stochastic simulation program. It was developed to investigate the effects of selection, mutation, recombination and drift on quantitative traits with varying architectures in structured populations connected by migration and located in a heterogeneous habitat. quantiNemo is highly flexible at various levels: population, selection, trait(s) architecture, genetic map for QTL and/or markers, environment, demography, mating system, etc. quantiNemo is coded in C++ using an object-oriented approach and runs on any computer platform. Availability: Executables for several platforms, user's manual, and source code are freely available under the GNU General Public License at http://www2.unil.ch/popgen/softwares/quantinemo.

Positron Emission Tomography and Computer Tomography (PET/CT) in Prostate, Bladder, and Testicular Cancers.

Positron emission computed tomography (PET) is a functional, noninvasive method for imaging regional metabolic processes that is nowadays most often combined to morphological imaging with computed tomography (CT). Its use is based on the well-founded assumption that metabolic changes occur earlier in tumors than morphologic changes, adding another dimension to imaging. This article will review the established and investigational indications and radiopharmaceuticals for PET/CT imaging for prostate cancer, bladder cancer and testicular cancer, before presenting upcoming applications in radiation therapy.

Hand detection in cluttered scene images using Fourier-Mellin invariant features

This paper proposes an automatic hand detection system that combines the Fourier-Mellin Transform along with other computer vision techniques to achieve hand detection in cluttered scene color images. The proposed system uses the Fourier-Mellin Transform as an invariant feature extractor to perform RST invariant hand detection. In a first stage of the system a simple non-adaptive skin color-based image segmentation and an interest point detector based on corners are used in order to identify regions of interest that contains possible matches. A sliding window algorithm is then used to scan the image at different scales performing the FMT calculations only in the previously detected regions of interest and comparing the extracted FM descriptor of the windows with a hand descriptors database obtained from a train image set. The results of the performed experiments suggest the use of Fourier-Mellin invariant features as a promising approach for automatic hand detection.

Hand detection in cluttered scene images using Fourier-Mellin invariant features

This paper proposes an automatic hand detection system that combines the Fourier-Mellin Transform along with other computer vision techniques to achieve hand detection in cluttered scene color images. The proposed system uses the Fourier-Mellin Transform as an invariant feature extractor to perform RST invariant hand detection. In a first stage of the system a simple non-adaptive skin color-based image segmentation and an interest point detector based on corners are used in order to identify regions of interest that contains possible matches. A sliding window algorithm is then used to scan the image at different scales performing the FMT calculations only in the previously detected regions of interest and comparing the extracted FM descriptor of the windows with a hand descriptors database obtained from a train image set. The results of the performed experiments suggest the use of Fourier-Mellin invariant features as a promising approach for automatic hand detection.

Study of OSEM with different subsets in grating-based X-ray differential phase-contrast imaging.

Impressive developments in X-ray imaging are associated with X-ray phase contrast computed tomography based on grating interferometry, a technique that provides increased contrast compared with conventional absorption-based imaging. A new "single-step" method capable of separating phase information from other contributions has been recently proposed. This approach not only simplifies data-acquisition procedures, but, compared with the existing phase step approach, significantly reduces the dose delivered to a sample. However, the image reconstruction procedure is more demanding than for traditional methods and new algorithms have to be developed to take advantage of the "single-step" method. In the work discussed in this paper, a fast iterative image reconstruction method named OSEM (ordered subsets expectation maximization) was applied to experimental data to evaluate its performance and range of applicability. The OSEM algorithm with different subsets was also characterized by comparison of reconstruction image quality and convergence speed. Computer simulations and experimental results confirm the reliability of this new algorithm for phase-contrast computed tomography applications. Compared with the traditional filtered back projection algorithm, in particular in the presence of a noisy acquisition, it furnishes better images at a higher spatial resolution and with lower noise. We emphasize that the method is highly compatible with future X-ray phase contrast imaging clinical applications.

BadiRate: Estimating Family Turnover Rates by Likelihood-Based Methods

Motivation: The comparative analysis of gene gain and loss rates is critical for understanding the role of natural selection and adaptation in shaping gene family sizes. Studying complete genome data from closely related species allows accurate estimation of gene family turnover rates. Current methods and software tools, however, are not well designed for dealing with certain kinds of functional elements, such as microRNAs or transcription factor binding sites. Results: Here, we describe BadiRate, a new software tool to estimate family turnover rates, as well as the number of elements in internal phylogenetic nodes, by likelihood-based methods and parsimony. It implements two stochastic population models, which provide the appropriate statistical framework for testing hypothesis, such as lineage-specific gene family expansions or contractions. We have assessed the accuracy of BadiRate by computer simulations, and have also illustrated its functionality by analyzing a representative empirical dataset.

GIS-Based Accident Location and Analysis System (GIS-ALAS) Project Report: Phase 1, 1998

This report summarizes progress made in Phase 1 of the GIS-based Accident Location and Analysis System (GIS-ALAS) project. The GIS-ALAS project builds on several longstanding efforts by the Iowa Department of Transportation (DOT), law enforcement agencies, Iowa State University, and several other entities to create a locationally-referenced highway accident database for Iowa. Most notable of these efforts is the Iowa DOT’s development of a PC-based accident location and analysis system (PC-ALAS), a system that has been well received by users since it was introduced in 1989. With its pull-down menu structure, PC-ALAS is more portable and user-friendly than its mainframe predecessor. Users can obtain accident statistics for locations during specified time periods. Searches may be refined to identify accidents of specific types or involving drivers with certain characteristics. Output can be viewed on a computer screen, sent to a file, or printed using pre-defined formats.

BadiRate: estimating family turnover rates by likelihood-based methods

Motivation: The comparative analysis of gene gain and loss rates is critical for understanding the role of natural selection and adaptation in shaping gene family sizes. Studying complete genome data from closely related species allows accurate estimation of gene family turnover rates. Current methods and software tools, however, are not well designed for dealing with certain kinds of functional elements, such as microRNAs or transcription factor binding sites. Results: Here, we describe BadiRate, a new software tool to estimate family turnover rates, as well as the number of elements in internal phylogenetic nodes, by likelihood-based methods and parsimony. It implements two stochastic population models, which provide the appropriate statistical framework for testing hypothesis, such as lineage-specific gene family expansions or contractions. We have assessed the accuracy of BadiRate by computer simulations, and have also illustrated its functionality by analyzing a representative empirical dataset.

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces.

The estimation of muscle forces in musculoskeletal shoulder models is still controversial. Two different methods are widely used to solve the indeterminacy of the system: electromyography (EMG)-based methods and stress-based methods. The goal of this work was to evaluate the influence of these two methods on the prediction of muscle forces, glenohumeral load and joint stability after total shoulder arthroplasty. An EMG-based and a stress-based method were implemented into the same musculoskeletal shoulder model. The model replicated the glenohumeral joint after total shoulder arthroplasty. It contained the scapula, the humerus, the joint prosthesis, the rotator cuff muscles supraspinatus, subscapularis and infraspinatus and the middle, anterior and posterior deltoid muscles. A movement of abduction was simulated in the plane of the scapula. The EMG-based method replicated muscular activity of experimentally measured EMG. The stress-based method minimised a cost function based on muscle stresses. We compared muscle forces, joint reaction force, articular contact pressure and translation of the humeral head. The stress-based method predicted a lower force of the rotator cuff muscles. This was partly counter-balanced by a higher force of the middle part of the deltoid muscle. As a consequence, the stress-based method predicted a lower joint load (16% reduced) and a higher superior-inferior translation of the humeral head (increased by 1.2 mm). The EMG-based method has the advantage of replicating the observed cocontraction of stabilising muscles of the rotator cuff. This method is, however, limited to available EMG measurements. The stress-based method has thus an advantage of flexibility, but may overestimate glenohumeral subluxation.

Ancient dispersal of the human fungal pathogen Cryptococcus gattii from the Amazon rainforest

Over the past two decades, several fungal outbreaks have occurred, including the high-profile 'Vancouver Island' and 'Pacific Northwest' outbreaks, caused by Cryptococcus gattii, which has affected hundreds of otherwise healthy humans and animals. Over the same time period, C. gattii was the cause of several additional case clusters at localities outside of the tropical and subtropical climate zones where the species normally occurs. In every case, the causative agent belongs to a previously rare genotype of C. gattii called AFLP6/VGII, but the origin of the outbreak clades remains enigmatic. Here we used phylogenetic and recombination analyses, based on AFLP and multiple MLST datasets, and coalescence gene genealogy to demonstrate that these outbreaks have arisen from a highly-recombining C. gattii population in the native rainforest of Northern Brazil. Thus the modern virulent C. gattii AFLP6/VGII outbreak lineages derived from mating events in South America and then dispersed to temperate regions where they cause serious infections in humans and animals.

Computer-simulation study of magnetic relaxation in anisotropic magnetic systems

We present a computer-simulation study of the effect of the distribution of energy barriers in an anisotropic magnetic system on the relaxation behavior of the magnetization. While the relaxation law for the magnetization can be approximated in all cases by a time logarithmic decay, the law for the dependence of the magnetic viscosity with temperature is found to be quite sensitive to the shape of the distribution of barriers. The low-temperature region for the magnetic viscosity never extrapolates to a positive no-null value. Moreover our computer simulation results agree reasonably well with some recent relaxation experiments on highly anisotropic single-domain particles.

A robust audio watermarking scheme based on MPEG 1 Layer 3 Compression

This paper describes an audio watermarking scheme based on lossy compression. The main idea is taken from an image watermarking approach where the JPEG compression algorithm is used to determine where and how the mark should be placed. Similarly, in the audio scheme suggested in this paper, an MPEG 1 Layer 3 algorithm is chosen for compression to determine the position of the mark bits and, thus, the psychoacoustic masking of the MPEG 1 Layer 3compression is implicitly used. This methodology provides with a high robustness degree against compression attacks. The suggested scheme is also shown to succeed against most of the StirMark benchmark attacks for audio.