Ultrafast diffraction and structural dynamics: The nature of complex molecules far from equilibrium

Studies of molecular structures at or near their equilibrium configurations have long provided information on their geometry in terms of bond distances and angles. Far-from-equilibrium structures are relatively unknown—especially for complex systems—and generally, neither their dynamics nor their average geometries can be extrapolated from equilibrium values. For such nonequilibrium structures, vibrational amplitudes and bond distances play a central role in phenomena such as energy redistribution and chemical reactivity. Ultrafast electron diffraction, which was developed to study transient molecular structures, provides a direct method for probing the nature of complex molecules far from equilibrium. Here we present our ultrafast electron diffraction observations of transient structures for two cyclic hydrocarbons. At high internal energies of ≈4 eV, these molecules display markedly different behavior. For 1,3,5-cycloheptatriene, excitation results in the formation of hot ground-state structures with bond distances similar to those of the initial structure, but with nearly three times the average vibrational amplitude. Energy is redistributed within 5 ps, but with a negative temperature characterizing the nonequilibrium population. In contrast, the ring-opening reaction of 1,3-cyclohexadiene is shown to result in hot structures with a C—C bond distance of over 1.7 Å, which is 0.2 Å away from any expected equilibrium value. Even up to 400 ps, energy remains trapped in large-amplitude motions comprised of torsion and asymmetric stretching. These studies promise a new direction for studying structural dynamics in nonequilibrium complex systems.

Logarithm of odds (lods) for linkage in complex inheritance.

Lod scores provide a method to unify linkage tests based on identity by descent and identity in marker state while permitting selection of the most informative individuals through their disease-related phenotypes and markers in relatives. After parametric lods are reviewed, a nonparametric approach that depends on a single logistic parameter beta is introduced. Lods for parents tested or unknown are derived, multiple pairwise mapping is presented, and power is shown to be good even for moderately small values of beta. Comparison of parametric and nonparametric approaches (yet to be made) will provide for polygenes the efficiency and reliability that lod scores gave to mapping of major loci 40 years ago.

The secreted Ipa complex of Shigella flexneri promotes entry into mammalian cells.

The bacterial pathogen Shigella flexneri causes bacillary dysentery in humans by invading coloncytes. Upon contact with epithelial cells, S. flexneri elicits localized plasma membrane projections sustained by long actin filaments which engulf the microorganism. The products necessary for Shigella entry include three secretory proteins: IpaB, IpaC, and IpaD. Extracellular IpaB and IpaC associate in a soluble complex, the Ipa complex. We have immunopurified this Ipa complex on latex beads and found that they were efficiently internalized into HeLa cells. Like S. flexneri entry, uptake of the beads bearing the Ipa complex was associated with membrane projections and polymerization of actin at the site of cell-bead interaction and was dependent on small Rho GTPases. These results indicate that a secreted factor can promote S. flexneri entry into epithelial cells.

Efficient generation of recombinant adenoviruses using adenovirus DNA-terminal protein complex and a cosmid bearing the full-length virus genome.

An efficient method of constructing recombinant adenoviruses (Ads) has been established. The expression unit to be introduced into recombinant Ad was first inserted into the unique Swa I site of the full-length Ad genome cloned in a cassette cosmid. The cassette bearing the expression unit was then cotransfected into human embryonic kidney 293 cells together with the Ad DNA-terminal protein complex digested at several sites with Eco T22I or Ase I/EcoRI. The use of the parent Ad DNA-terminal protein complex instead of the deproteinized Ad genome DNA allowed very efficient recovery of the desired recombinant Ad, and the above restriction digestion drastically reduced regeneration of the parent virus. Several hundred virus clones were readily obtained in each experiment, and about 70% of the clones were the desired recombinant viruses. Furthermore, because the cassette contained the full-length Ad genome, any position of the genome could be easily modified to develop a new vector design. We established construction systems for two types of Ad vectors, the E1-substitution type and the E4-insertion type. This method may greatly facilitate the application of recombinant Ads and should be useful for further improvement of Ad vectors.

Protein-protein interactions in the rigor actomyosin complex.

Since it has not been possible to crystallize the actomyosin complex, the x-ray structures of the individual proteins together with data obtained by fiber diffraction and electron microscopy have been used to build detailed models of filamentous actin (f-actin) and the actomyosin rigor complex. In the f-actin model, a single monomer uses 10 surface loops and two alpha-helices to make sometimes complicated interactions with its four neighbors. In the myosin molecule, both the essential and regulatory light chains show considerable structural homology to calmodulin. General principles are evident in their mode of attachment to the target alpha-helix of the myosin heavy chain. The essential light chain also makes contacts with other parts of the heavy chain and with the regulatory light chain. The actomyosin rigor interface is extensive, involving interaction of a single myosin head with regions on two adjacent actin monomers. A number of hydrophobic residues on the apposing faces of actin and myosin contribute to the main binding site. This site is flanked on three sides by charged myosin surface loops that form predominantly ionic interactions with adjacent regions of actin. Hydrogen bonding is likely to play a significant role in actin-actin and actin-myosin interactions since many of the contacts involve loops. The model building approach used with actomyosin is applicable to other multicomponent assemblies of biological interest and is a powerful method for revealing molecular interactions and providing insights into the mode of action of the assemblies.

DNA-protein binding assays from a single sea urchin egg: a high-sensitivity capillary electrophoresis method.

A capillary electrophoresis method has been developed to study DNA-protein complexes by mobility-shift assay. This method is at least 100 times more sensitive than conventional gel mobility-shift procedures. Key features of the technique include the use of a neutral coated capillary, a small amount of linear polymer in the separation medium, and use of covalently dye-labeled DNA probes that can be detected with a commercially available laser-induced fluorescence monitor. The capillary method provides quantitative data in runs requiring < 20 min, from which dissociation constants are readily determined. As a test case we studied interactions of a developmentally important sea urchin embryo transcription factor, SpP3A2. As little as 2-10 x 10(6) molecules of specific SpP3A2-oligonucleotide complex were reproducibly detected, using recombinant SpP3A2, crude nuclear extract, egg lysates, and even a single sea urchin egg lysed within the capillary column.

Vector-mediated delivery of 125I-labeled beta-amyloid peptide A beta 1-40 through the blood-brain barrier and binding to Alzheimer disease amyloid of the A beta 1-40/vector complex.

The brain amyloid of Alzheimer disease (AD) may potentially be imaged in patients with AD by using neuroimaging technology and a radiolabeled form of the 40-residue beta-amyloid peptide A beta 1-40 that is enabled to undergo transport through the brain capillary endothelial wall, which makes up the blood-brain barrier (BBB) in vivo. Transport of 125I-labeled A beta 1-40 (125I-A beta 1-40) through the BBB was found to be negligible by experiments with both an intravenous injection technique and an internal carotid artery perfusion method in anesthetized rats. In addition, 125I-A beta 1-40 was rapidly metabolized after either intravenous injection or internal carotid artery perfusion. BBB transport was increased and peripheral metabolism was decreased by conjugation of monobiotinylated 125I-A beta 1-40 to a vector-mediated drug delivery system, which consisted of a conjugate of streptavidin (SA) and the OX26 monoclonal antibody to the rat transferrin receptor, which undergoes receptor-mediated transcytosis through the BBB. The brain uptake, expressed as percent of injected dose delivered per gram of brain, of the 125I,bio-A beta 1-40/SA-OX26 conjugate was 0.15 +/- 0.01, a level that is 2-fold greater than the brain uptake of morphine. The binding of the 125I,bio-A beta 1-40/SA-OX26 conjugate to the amyloid of AD brain was demonstrated by both film and emulsion autoradiography performed on frozen sections of AD brain. Binding of the 125I,bio-A beta 1-40/SA-OX26 conjugate to the amyloid of AD brain was completely inhibited by high concentrations of unlabeled A beta 1-40. In conclusion, these studies show that BBB transport and access to amyloid within brain may be achieved by conjugation of A beta 1-40 to a vector-mediated BBB drug delivery system.

Restricted and conserved T-cell repertoires involved in allorecognition of class II major histocompatibility complex.

The nature of the alloreactive T-cell response is not yet clearly understood. These strong cellular responses are thought to be the basis of allograft rejection and graft-vs.-host disease. The question of the extent of responding T-cell repertoires has so far been addressed by cellular cloning, often combined with molecular T-cell receptor (TCR) analysis. Here we present a broad repertoire analysis of primed responder cells from mixed lymphocyte cultures in which two different DR1/3 responders were stimulated with DR3/4 cells. Repertoire analysis was performed by TCR spectratyping, a method by which T cells are analyzed on the basis of the complementarity-determining region 3 length of different variable region (V) families. Strikingly, both responders showed very similar repertoires when the TCR V beta was used as a lineage marker. This was not seen when TCR V alpha was analyzed. A different pattern of TCR V beta was observed if the stimulating alloantigen was changed. This finding indicates that alloreactive T cells form a specific repertoire for each alloantigen. Since conservation appears to be linked to TCR V beta, the question of different roles of alpha and beta chains in allorecognition is raised.

Photodissociation of a (mu-peroxo)(mu-hydroxo)bis[bis(bipyridyl)-cobalt(III)] complex: a tool to study fast biological reactions involving O2.

Upon photolysis at 355 nm, dioxygen is released from a (mu-peroxo)(mu-hydroxo)bis[bis(bipyridyl)cobalt-(III)] complex in aqueous solutions and at physiological pH with a quantum yield of 0.04. The [Co(bpy)2(H2O)2]2+ (bpy = bipyridyl) photoproduct was generated on a nanosecond or faster time scale as determined by time-resolved optical absorption spectroscopy. A linear correspondence between the spectral changes and the oxygen production indicates that O2 is released on the same time scale. Oxyhemoglobin was formed from deoxyhemoglobin upon photodissociation of the (mu-peroxo) (mu-hydroxo)bis[bis(bipyridyl)cobalt(III)] complex, verifying that dioxygen is a primary photoproduct. This complex and other related compounds provide a method to study fast biological reactions involving O2, such as the reduction of dioxygen to water by cytochrome oxidase.

Construction and characterization of a highly complex retroviral library for lineage analysis.

Replication-incompetent retroviral vectors encoding histochemical reporter genes have been used for studying lineal relationships in a variety of species. A crucial element in the interpretation of data generated by this method is the identification of sibling relationships, or clonal boundaries. The use of a library of viruses in which each member is unique can greatly facilitate this aspect of the analysis. A previously reported murine retroviral library containing about 80 members demonstrated the utility of the library approach. However, the relatively low number of tags in the murine library necessitated using low infection rates in order to give confidence in clonal assignments. To obviate the need for low infection rates, a far more complex library was created and characterized. The CHAPOL library was constructed such that each member encodes a histochemical reporter gene and has a DNA tag derived from a degenerate oligonucleotide pool synthesized to have a complexity of > 1 x 10(7). The library was tested after infection of cells in vitro or in vivo. The DNA tag from each histochemically labeled cell or clone of cells was recovered by PCR and sequenced for unambiguous identification. Three hundred and twenty tags have been identified after infection, and so far no tag has been seen to result from more than one independent infection. Thus, an equal distribution of inserts is suggested, and Monte Carlo analysis predicts a complexity of > 10(4) members.

Modelagem estocástica da dispersão axial: aplicação em um reator tubular de polimerização.

Reatores tubulares de polimerização podem apresentar um perfil de velocidade bastante distorcido. Partindo desta observação, um modelo estocástico baseado no modelo de dispersão axial foi proposto para a representação matemática da fluidodinâmica de um reator tubular para produção de poliestireno. A equação diferencial foi obtida inserindo a aleatoriedade no parâmetro de dispersão, resultando na adição de um termo estocástico ao modelo capaz de simular as oscilações observadas experimentalmente. A equação diferencial estocástica foi discretizada e resolvida pelo método Euler-Maruyama de forma satisfatória. Uma função estimadora foi desenvolvida para a obtenção do parâmetro do termo estocástico e o parâmetro do termo determinístico foi calculado pelo método dos mínimos quadrados. Uma análise de convergência foi conduzida para determinar o número de elementos da discretização e o modelo foi validado através da comparação de trajetórias e de intervalos de confiança computacionais com dados experimentais. O resultado obtido foi satisfatório, o que auxilia na compreensão do comportamento fluidodinâmico complexo do reator estudado.

Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products

Thermal degradation of PLA is a complex process since it comprises many simultaneous reactions. The use of analytical techniques, such as differential scanning calorimetry (DSC) and thermogravimetry (TGA), yields useful information but a more sensitive analytical technique would be necessary to identify and quantify the PLA degradation products. In this work the thermal degradation of PLA at high temperatures was studied by using a pyrolyzer coupled to a gas chromatograph with mass spectrometry detection (Py-GC/MS). Pyrolysis conditions (temperature and time) were optimized in order to obtain an adequate chromatographic separation of the compounds formed during heating. The best resolution of chromatographic peaks was obtained by pyrolyzing the material from room temperature to 600 °C during 0.5 s. These conditions allowed identifying and quantifying the major compounds produced during the PLA thermal degradation in inert atmosphere. The strategy followed to select these operation parameters was by using sequential pyrolysis based on the adaptation of mathematical models. By application of this strategy it was demonstrated that PLA is degraded at high temperatures by following a non-linear behaviour. The application of logistic and Boltzmann models leads to good fittings to the experimental results, despite the Boltzmann model provided the best approach to calculate the time at which 50% of PLA was degraded. In conclusion, the Boltzmann method can be applied as a tool for simulating the PLA thermal degradation.

Rigorous Design of Complex Distillation Columns Using Process Simulators and the Particle Swarm Optimization Algorithm

We present a derivative-free optimization algorithm coupled with a chemical process simulator for the optimal design of individual and complex distillation processes using a rigorous tray-by-tray model. The proposed approach serves as an alternative tool to the various models based on nonlinear programming (NLP) or mixed-integer nonlinear programming (MINLP) . This is accomplished by combining the advantages of using a commercial process simulator (Aspen Hysys), including especially suited numerical methods developed for the convergence of distillation columns, with the benefits of the particle swarm optimization (PSO) metaheuristic algorithm, which does not require gradient information and has the ability to escape from local optima. Our method inherits the superstructure developed in Yeomans, H.; Grossmann, I. E.Optimal design of complex distillation columns using rigorous tray-by-tray disjunctive programming models. Ind. Eng. Chem. Res.2000, 39 (11), 4326–4335, in which the nonexisting trays are considered as simple bypasses of liquid and vapor flows. The implemented tool provides the optimal configuration of distillation column systems, which includes continuous and discrete variables, through the minimization of the total annual cost (TAC). The robustness and flexibility of the method is proven through the successful design and synthesis of three distillation systems of increasing complexity.

Conceptual Modelling of Complex Network Management Systems

Society, as we know it today, is completely dependent on computer networks, Internet and distributed systems, which place at our disposal the necessary services to perform our daily tasks. Moreover, and unconsciously, all services and distributed systems require network management systems. These systems allow us to, in general, maintain, manage, configure, scale, adapt, modify, edit, protect or improve the main distributed systems. Their role is secondary and is unknown and transparent to the users. They provide the necessary support to maintain the distributed systems whose services we use every day. If we don’t consider network management systems during the development stage of main distributed systems, then there could be serious consequences or even total failures in the development of the distributed systems. It is necessary, therefore, to consider the management of the systems within the design of distributed systems and systematize their conception to minimize the impact of the management of networks within the project of distributed systems. In this paper, we present a formalization method of the conceptual modelling for design of a network management system through the use of formal modelling tools, thus allowing from the definition of processes to identify those responsible for these. Finally we will propose a use case to design a conceptual model intrusion detection system in network.

Method for targetless tracking subpixel in-plane movements

We present a targetless motion tracking method for detecting planar movements with subpixel accuracy. This method is based on the computation and tracking of the intersection of two nonparallel straight-line segments in the image of a moving object in a scene. The method is simple and easy to implement because no complex structures have to be detected. It has been tested and validated using a lab experiment consisting of a vibrating object that was recorded with a high-speed camera working at 1000 fps. We managed to track displacements with an accuracy of hundredths of pixel or even of thousandths of pixel in the case of tracking harmonic vibrations. The method is widely applicable because it can be used for distance measuring amplitude and frequency of vibrations with a vision system.