Occurrence of Mycoplasma synoviae on commercial poultry farms of Pernambuco, Brazil

The state of Pernambuco is the largest producer of eggs in the North and Northeast of Brazil and second one in the broiler production. Mycoplasmas are important avian pathogens, which cause respiratory and joint diseases that result in large economic losses. The aim of the present study was to investigate the occurrence of Mycoplasma gallisepticum (MG) and Mycoplasma synoviae (MS) in broilers and commercial laying hens in the state of Pernambuco, Brazil. Tracheal fragments were analyzed from 55 healthy broilers, 35 broilers with respiratory signs and 30 commercial laying hens with respiratory signs, from 24 commercial poultry farms, each sample was composed of a pool of five birds. The bacteriological exam, PCR and nested PCR were used for the detection of Mycoplasma gallisepticum (MG) and Mycoplasma synoviae (MS). All samples were negative in bacteriological isolation. In the PCR analyses, seven samples from birds with respiratory signs were positive for MS and one was positive for MG, the latter of which was confirmed as the MG-F vaccine strain. The occurrence of MS in chickens with respiratory signs may indicate inadequate sanitary management on poultry farms, favoring the propagation of mycoplasmosis.

Key factors in transforming university internationalization into commercial activity in Finland. Case of University of Turku

Globalization, developments in ICT, emergence of knowledge society and other changes have reformed the environment for international higher education during the past few decades. Consequently, higher education sector has moved towards more marketing-oriented system, and universities have started to undertake commercial activities as part of their internationalization. This development has emerged to Finland as well, which forms the basis for this study. The purpose is to examine commercialization in Finnish university landscape and to investigate the ways Finnish university could capitalize its international activities and educational knowledge for export. The research question of the study is: What are the key factors in transforming university internationalization into commercial activity in the Finnish university landscape? The main problem is further divided into three sub-questions: 1) How can a university internationalize; 2) what are the motivational factors behind university internationalization and commercialization; and 3) how can higher education be developed into export services and products? The research was conducted as a qualitative case study of University of Turku. Methods used for gathering and examining data were interviewing and document analysis. Primary data was collected through four individual semi-structured interviews, which were conducted face-to-face. Secondary data that included reports, articles and electronic materials such as university web pages, was used to complement the primary data. The results were analyzed by theming the data into three broader categories of internationalization activities; drivers and motivations and; education export activities. After the data was organized in themes, analysis continued by comparing different parts of data and finding patterns that would explain the phenomenon in Finnish universities. According to the empirical data, University of Turku is currently on the growth state of internationalization with strategies such as internationalization of curriculum, establishment of international research groups, mobility of students and academics, international networking and support services. Commercialization phenomenon is still rather new to the case university, but it has already developed educational products and services for export. The study concludes that university internationalization cannot be directly transformed into commercial activities in the Finnish context, but the universities need to be active in actually creating educational products. The key factors found in this study include: 1) the Finnish government policies behind the current hype of export education; 2) the potential and knowledge capacity of universities for exports; 3) need for additional profits; 4) further internationalization through commercial activities; 5) recognizing and exploiting the specific areas of strength and 6) establishing of cooperative partnerships for better products.

Synthesis, characterization and chemical sensor application of conducting polymers

Polymeric materials that conduct electricity are highly interesting for fundamental studies and beneficial for modern applications in e.g. solar cells, organic field effect transistors (OFETs) as well as in chemical and bio‐sensing. Therefore, it is important to characterize this class of materials with a wide variety of methods. This work summarizes the use of electrochemistry also in combination with spectroscopic methods in synthesis and characterization of electrically conducting polymers and other π‐conjugated systems. The materials studied in this work are intended for organic electronic devices and chemical sensors. Additionally, an important part of the presented work, concerns rational approaches to the development of water‐based inks containing conducting particles. Electrochemical synthesis and electroactivity of conducting polymers can be greatly enhanced in room temperature ionic liquids (RTILs) in comparison to conventional electrolytes. Therefore, poly(para‐phyenylene) (PPP) was electrochemically synthesized in the two representative RTILs: bmimPF6 and bmiTf2N (imidazolium and pyrrolidinium‐based salts, respectively). It was found that the electrochemical synthesis of PPP was significantly enhanced in bmimPF6. Additionally, the results from doping studies of PPP films indicate improved electroactivity in bmimPF6 during oxidation (p‐doping) and in bmiTf2N in the case of reduction (n‐doping). These findings were supported by in situ infrared spectroscopy studies. Conducting poly(benzimidazobenzophenanthroline) (BBL) is a material which can provide relatively high field‐effect mobility of charge carriers in OFET devices. The main disadvantage of this n‐type semiconductor is its limited processability. Therefore in this work BBL was functionalized with poly(ethylene oxide) PEO, varying the length of side chains enabling water dispersions of the studied polymer. It was found that functionalization did not distract the electrochemical activity of the BBL backbone while the processability was improved significantly in comparison to conventional BBL. Another objective was to study highly processable poly(3,4‐ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) water‐based inks for controlled patterning scaled‐down to nearly a nanodomain with the intention to fabricate various chemical sensors. Developed PEDOT:PSS inks greatly improved printing of nanoarrays and with further modification with quaternary ammonium cations enabled fabrication of PEDOT:PSS‐based chemical sensors for lead (II) ions with enhanced adhesion and stability in aqueous environments. This opens new possibilities for development of PEDOT:PSS films that can be used in bio‐related applications. Polycyclic aromatic hydrocarbons (PAHs) are a broad group of π‐conjugated materials consisting of aromatic rings in the range from naphthalene to even hundred rings in one molecule. The research on this type of materials is intriguing, due to their interesting optical properties and resemblance of graphene. The objective was to use electrochemical synthesis to yield relatively large PAHs and fabricate electroactive films that could be used as template material in chemical sensors. Spectroscopic, electrochemical and electrical investigations evidence formation of highly stable films with fast redox response, consisting of molecules with 40 to 60 carbon atoms. Additionally, this approach in synthesis, starting from relatively small PAH molecules was successfully used in chemical sensor for lead (II).

Weed control and green ear yield in maize

The objective of this work was to evaluate the influence of weeding frequency on cultivar Centralmex green corn yield. Two experiments were conducted in Mossoró-RN (Brazil), with the use of sprinkler irrigation. A random block design with four replicates was used. It was observed that the total number and weight (TW) of unhusked green ears, the number and weight of marketable unhusked ears and the number and weight of marketable husked ears were reduced under no weeding treatment. The number timing of weedings did not influence green corn yield, except for one weeding at 60 DAP, which was equivalent to the "no weeding" treatment, for TW. When maize is marketed considering the total number of green ears, higher net income is obtained when one weeding is carried out 45 days after planting.

Effect of plant row spacing and herbicide use on weed aboveground biomass and corn grain yield

The use of narrow plant spacing in corn (Zea mays) has been suggested as a technological alternative to obtain grain yield increases, due to a better use of resources. The regular pattern could diminish intraspecific competition while favoring interspecific competition with weeds. The objective of this study was to analyze the effect of corn row spacing on weed aboveground biomass and corn grain yield. Field experiments were conducted during 2002/2003 and 2003/2004 growing seasons. Three corn hybrids with two-row width (0.70 and 0.35 m) were tested. A greater photosynthetic photon flux density (PPFD) interception with a lower weed aboveground dry matter in narrow row arrangement was obtained. Corn grain yield was greater in the narrow row arrangement than in the wide row spacing. This increase in grain yield was related to a better resource use that allows for a reduced interspecific competition. The use of reduced spatial arrangement appeared to be an interesting alternative to increase both the grain yield potential and corn suppressive ability against weeds in corn dryland production systems.

Vegetative and reproductive development of Costa Rican weedy rice compared with commercial rice (Oryza sativa)

The variability in the chronology of the vegetative and reproductive development of weedy rice complex has been little studied. However, a field trial was established to study the timing of growth stages of sixteen weedy rice morphotypes and five rice varieties of Costa Rica. Weedy rice presented a wide range of variation for all descriptors among and within morphotypes. Weedy rice was taller than the rice varieties during vegetative phase and showed a growth increase of 14-23 cm every two weeks. Six morphotypes emerged earlier than commercial rice varieties, but no differences where found between samples for the time required for starting tillering. Early emergence of weedy rice morphotypes was not associated with early flowering, thus no correlation was detected between the vegetative and reproductive phases. All weedy rice morphotypes reached anthesis and maturity earlier than the rice varieties. Nevertheless, varieties Setesa-9 and CR-5272 overlapped anthesis with eleven morphotypes and variety CR-4338 overlapped flowering with eight weedy rice morphotypes. In contrast, none of the morphotypes overlapped anthesis with varieties CR-1821 and CR-1113. The results obtained showed the competitive capacity of weedy rice and provided valuable information about flowering overlap between weedy rice morphotypes and rice varieties which will be useful in the design of gene flow studies among them.

Effects of weed control through cowpea intercropping on mayze morphology and yield

Intercropping combined with competitive maize cultivars can reduce the use of herbicides to control weeds. The objective of this work was to evaluate the effects of intercropping cowpea and maize, as well as hand-weeding on maize morphology and yield. The experimental design was in randomized complete blocks, with treatments arranged in split-plots and five replications. The plots consisted of four maize cultivars (BA 8512, BA 9012, EX 4001, EX 6004) and the split-plots consisted of the following treatments: no-weeding; twice hand-weeding (20 and 40 days after sowing); and intercropping with cowpea ('Sempre Verde' cultivar), both maize and cowpea sown at the same time. The variables evaluated were: maize fresh green ears and grain yield; characteristics of internodes, leaves, tassels, ears, grains; plant height and ear insertion height; number of weed plants and species; fresh and dry biomass of weed species and cowpea. Ten weed species were outstanding during the experiment, many of them from the Poaceae family. No interactions were found between weed control method and maize cultivars for most variables evaluated; and plants from hand-weeded split-plots showed superior mean values compared to plants from non-weeded and intercropped split-plots, both not differing from each other. The cowpea was inefficient in controlling weed, reducing the maize yields and not producing any grain. The maize cultivars 'BA 8512' and 'BA 9012 showed the highest mean green ear yield, and the highest grain yield in hand-weeded, no-weeded and intercropped split-plots. On the other hand, the maize cultivar 'EX 6004' showed such high means only in no-weeded and intercropped split-plots. 'EX 4001 presented the worst means in these variables for hand-weeded, no-weeded ant intercropped split-plots.

Growth, nodulation, and yield of soybean and associated weeds as affected by weed management

Two field experiments were conducted at the experimental farm of the National Research Centre at Shalakan, Kalubia Governorate, Egypt, during 2006 and 2007 seasons, to study the effect of three pre-emergence herbicides, prometryn [at the rate of 0.75, 1.5 and 2.25 kg ha-1], oxadiargyl [at the rate of 240, 480 and 720 g ha-1] and butralin [at the rate of 1.20, 2.40 and 3.36 kg ha-1], two hand hoeing treatments and a nonweeded check, on weed infestation, nodulation, growth, yield and yield attributes of soybean plants. Two hand hoeing treatments resulted in the highest weed depression expressed as the lowest fresh and dry weights of broadleaved, grassy and total weeds. The reduction percentage in weed dry matter compared to the nonweeded treatment was 98.3, 92.64 and 96.9% in broadleaved, grassy and total weeds, respectively. Application of the three herbicides at higher or recommended doses significantly reduced fresh and dry weight of the weeds compared to the nonweeded treatment. The results indicated that all the three herbicides at rates higher than the recommended markedly decreased the number, fresh and dry weight of nodules as well as root, shoot and total dry weight plant-1, while application of two hand hoeing treatments significantly increased these traits. Two hand hoeing treatments and pre-emergence herbicides at the recommended rates markedly increased soybean yield and its attributes. Two hand hoeing treatments gave the highest values of number of pods per plant-1, weight of pods per plant-1 and number of seeds per plant-1 by 140.7, 150.0 and 59.8%, respectively, compared to the nonweeded treatment. On the other hand, oxadiargyl at the recommended rate (480 g ha-1) was the best treatment for promoting seed yield (g plant-1), seed yield (kg ha-1) and biological yield (g plant-1) compared to the nonweeded treatment by 87.3, 85.0 and 88.2%, respectively. Prometryn at the rate of 1.50 kg ha-1, followed by two hand hoeing treatments, produced the highest shoot and seed protein percentage as well as seed oil percentage, compared to the other weed control treatments.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

Growth and yield of corn grain and green ear in competition with weeds

Studies on plant growth are interesting because they provide explanations for the factors that influence yield in various crops. The objective of this work was to evaluate growth and yield in corn cultivar AG1051, when in competition with weeds. Cultivar AG 1051 was submitted to two groups of treatments: weed control, and sampling periods for dry biomass evaluation. The weed control treatments consisted of hoeing (two hoeings performed at 20 and 40 days after sowing) and no hoeing. Sampling periods consisted of collecting the above-ground part and roots of corn every fifteen days, until 105 days after sowing (DAS); the first sampling was performed 30 DAS. A completely randomized block design with ten replicates was used. For the characteristics evaluated in a single season, statistical analyses were carried out as a random block experiment. For the characteristics evaluated in several periods, statistical analyses were carried out as random blocks with split-plots (weed control assigned to plots). Fourteen weed species, unevenly distributed throughout the experimental area, were the most important. The growth observed for the above-ground part and root system of corn was 30% smaller in the non-hoed plots, compared to the hoed plots. Lack of weed control increased dry matter of the above-ground part of the weeds and reduced the number of unhusked and husked marketable green ears by 23% and 49%, respectively. Grain yield reduction caused by lack of weed control reached 38%.

Green ear yield and grain yield of maize cultivars in competition with weeds

The reduction in herbicide use is one of the greatest interests for modern agriculture and several alternatives are being investigated with this objective, including the adoption of cultivars that suppress weeds. The objective of this study was to verify if maize cultivars develop differently, in competition with weeds, to produce green ears and grain. Randomized complete block design was used, with split-plots and five replications. Cultivars DKB 390, DKB 466, DKB 350, AG 7000, AG 7575 and Master, were evaluated in the plots, without weeding and two weedings (at 22 and 41 days after sowing) in sub plots. Twenty-one species were identified in the experimental area, the most frequent being Gramineae (Poaceae), Euphorbiaceae, Leguminosae (Fabaceae) and Convolvulaceae species. There was no difference in the dry biomass above-ground part of the weeds in the plots of the evaluated cultivars. The cultivars behaved similarly in treatments with or without hoeing, except for plant height and ear height evaluations. Without hoeing, plant height increased in cultivar DKB 390, while plant height and ear height decreased in cultivar AG 7575. In the other cultivars, these traits did not change under weed control. The presence of weeds decreased the values of all traits employed to assess green corn yield, with the exception of the total number of green ears and grain yield.

Corn yield response to weed and fall armyworm controls

The interference imposed the by weeds on corn decreases practically all vegetative characteristics. As consequence, the green ear and grain yield are also reduced. Losses due to the fall armyworm (Spodoptera frugiperda) attack can reduce corn grain yield up to 34%. In general, weed and insect control issues are addressed separately in research papers. Nevertheless, interaction between weeds and insects may exist. This study aimed to evaluate green ear and corn grain yield response to weed and fall armyworm control. A completely randomized block design with split-plots and five replicates was adopted. Corn cultivar AG 1051 was grown under weedy conditions or with control by hand hoeings performed at 20 and 40 days after planting. Fall armyworm control (applied to subplots) was performed with sprays of water (control), deltamethrin (5g active ingredient ha-1); neem oil, at 0.5% (diluted in water), and neem leaf extract at 5%. Each product was sprayed three times, at seven-day intervals, starting at the 7th day after planting, using 150 L ha-1 of the tank solution. Dry mass of the above-ground part, internode diameter, leaf length, leaf width, leaf area, green ear yield and grain yield of corn were reduced due to the lack of weed control. Fall armyworm control in the weeded plots did not influence green ear yield and grain yield, except green mass of marketable, husked ears, which was reduced when the caterpillar was not controlled. Without weed control, neem extracts and deltamethrin sprays provided highest yields of number and total weight of green ears with husks, number and weight of marketable ears with husks and number of marketable ears without husks. The best results for husked ear mass and for grain yield were obtained with neem extract and deltamethrin, respectively.

Corn growth and yield in competition with weeds

Although labor is intensive, evaluating the growth of crops may allow a better understanding of crop performance, including the reasons why certain cultivars can compete better with weeds. This study aims at evaluating growth, green ear yield, and grain yield in corn when in competition with weeds. Cultivars AG 1051 and BRS 106 were grown with (two hoeings, at 20 and 40 days after sowing) or without weed control. In order to evaluate crop growth, six collections of the above-ground part and the root system of corn were performed, every 15 days, with the first collection made 30 days after sowing. A randomized complete block design was adopted, with split-split plots (weed control in plots, cultivars in subplots, and collections in sub-subplots) and ten replicates. Eighteen weed species were found in the experiment area. Increased values of corn leaf area, above-ground part and root system, due to plant age function, were smaller in non-hoed plots than in hoed plots and were dependent upon cultivar. The lack of weed control increased dry matter of weeds aboveground part and decreased green ear yield and grain yield. Cultivar AG 1051 had higher increases in leaf area, above-ground part of the plant and root system, due to plant age function, and controlled weeds better than cultivar BRS 106. In addition, cultivar AG 1051 was superior to other cultivars with respect to most traits used for green corn yield and grain yield assessment.

Topochemistry of physical and chemical pretreatments of biomass as investigated by FE-SEM, XPS and ToF-SIMS

Surface chemistry is of great importance in plant biomass engineering and applications. The surface chemical composition of biomass which includes lignin, carbohydrates and extractives influences its interactions with chemical agents, such as pulp processing/papermaking chemicals, or enzymes for different purposes. In this thesis, the changes in the surface chemical composition of lignocellulosic biomass after physical modification for the improvement of resulting paper properties and chemical treatment for the enhancement of enzymatic hydrolysis were investigated. Low consistency (LC) refining was used as physical treatment of bleached softwood and hardwood pulp samples, and the surface chemistry of refined samples was investigated. The refined pulp was analysed as whole pulp while the fines-free fibre samples were characterized separately. The fines produced in LCrefining contributed to an enlarged surface specific area as well as the change of surface coverage by lignin and extractives, as investigated by X-ray photoelectron spectroscopy (XPS). The surface coverage by lignin of the whole pulp decreased after refining while the surface coverage by extractives increased both for pine and eucalyptus. In the case of pine, the removal of fines resulted in reduction of the surface coverage by extractives, while the surface coverage by lignin increased on fibre sample (without fines). In the case of eucalyptus, the surface coverage by lignin of fibre samples decreased after the removal of fines. In addition, the surface distribution of carbohydrates, lignin and extractives of pine and eucalyptus samples was determined by Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). LC-refining increased the amounts of pentose, hexose and extractives on the surface of pine samples. ToF-SIMS also gave clear evidence about xylan deposition and reduction of surface lignin distribution on the fibre of eucalyptus. However, the changes in the surface chemical composition during the physical treatment has led to an increase in the adsorption of fluorescent whitening agents (FWAs) on fibres due to a combination of electro-static forces, specific surface area of fibres and hydrophobic interactions. Various physicochemical pretreatments were conducted on wood and non-wood biomass for enhancing enzymatic hydrolysis of polysaccharides, and the surface chemistry of the pretreated and enzymatically hydrolysed samples was investigated by field emission scanning electron microscopy (FE-SEM), XPS and ToF-SIMS. A hydrotrope was used as a relatively novel pretreatment technology both in the case of wood and non-wood biomass. For comparison, ionic liquid and hydrothermal pretreatments were applied on softwood and hardwood as well. Thus, XPS analysis showed that the surface lignin was more efficiently removed by hydrotropic pretreatment compared to ionic liquid or hydrothermal pretreatments. SEM analysis also found that already at room temperature the ionic liquid pretreatments were more effective in swelling the fibres compared with hydrotropic pretreatment at elevated temperatures. The enzymatic hydrolysis yield of hardwood was enhanced due to the decrease in surface coverage of lignin, which was induced by hydrotropic treatment. However, hydrotropic pretreatment was not appropriate for softwood because of the predominance of guaiacyl lignin structure in this material. In addition, the reduction of surface lignin and xylan during pretreatment and subsequent increase in cellulose hydrolysis by enzyme could be observed from ToF-SIMS results. The characterisation of the non-wood biomass (e.g. sugarcane bagasse and common reed) treated by hydrotropic method, alkaline and alkaline hydrogen peroxide pretreatments were carried out by XPS and ToF-SIMS. According to the results, the action for the removal of the surface lignin of non-wood biomass by hydrotropic pretreatment was more significant compared to alkaline and alkaline hydrogen peroxide pretreatments, although a higher total amount of lignin could be removed by alkaline and alkaline hydrogen peroxide pretreatment. Furthermore, xylan could be remarkably more efficiently removed by hydrotropic method. Therefore, the glucan yield achieved from hydrotropic treated sample was higher than that from samples treated with alkaline or alkaline hydrogen peroxide. Through the use of ToF-SIMS, the distribution and localization of lignin and carbohydrates on the surface of ignocelluloses during pretreatment and enzymatic hydrolysis could be detected, and xylan degradation during enzymatic hydrolysis could also be assessed. Thus, based on the results from XPS and ToF-SIMS, the mechanism of the hydrotropic pretreatment in improving the accessibility of enzymes to fibre and further ameliorating of the enzymatic saccharification could be better elucidated.

Brachiaria ruziziensis and herbicide on the yield of upland rice

The correct management of cover crops in no-tillage aims to obtain greater benefits with its introduction in agricultural systems. The use of forage species such as Brachiaria, due to the large amount of biomass and for persisting longer on the ground, has become a good option. In this sense, an important point is the time interval between the cover desiccation with glyphosate and planting of rice in order to obtain higher operating income in the sowing, greater availability of nutrients, greater presence of straw on the soil surface, and lower release of possible allelopathic substances. The objective of this study was to assess the effect of the management of B. ruziziensis, with or without herbicide, preceding the crop planting, in the yield components and yield of rice. The trial was conducted in greenhouse conditions and consisted of three types of management of B. ruziziensis before sowing rice. B. ruziziensis showed linear growth and the presence of large amounts of its dry matter biomass on the soil surface was detrimental to rice yield; B. ruziziensis management close to planting caused a significant reduction in rice yield; the management of B. ruziziensis with herbicides should be conducted with more than 20 days before planting rice; the management of B. ruziziensis for the removal of its leaves with or without herbicide should be carried out with 10 or more days before planting rice, and the correct management of B. ruziziensis at the right time allowed for significant increases in the rice yield.