Novos conversores retificadores Sepic ZCS-PWM, operando como abaixadores de tensao, com elevados rendimento e fator de potencia - um estudo comparativo

A comparative evaluation regarding a new zero-current-switching (ZCS) pulse width modulated (PWM) Sepic rectifier, operating in voltage step-down mode, employing two different techniques, in order to obtain high power factor and reduced total harmonic distortion (THD) at the input current, is presented. The methods are those in continuous-current mode operation, known as peak current mode control with slope compensation, and average-current mode control. The principle of operation, the theoretical analysis, a design example and the main experimental results are presented for both proposed control techniques.

Composição corporal e índices biométricos do pacu, Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes, Characidae) submetido a ciclos alternados de restrição alimentar e realimentação

The present paper evaluated, through hepatosomatic/mesenteric fat indexes and body composition, the pacu energy utilization when submitted to alternated food restriction/refeeding cycles during the growout period. Juveniles were distributed in three pounds and submitted to different feeding programs: A (ad libitum daily feeding), B (4-week feeding restriction and 9-week refeeding) and C (6-week feeding restrictions and 7-week refeeding), totaling 13 weeks for each cycle (4 experimental cycles). At the end of the periods, fish were sampled to obtain biometrics and biochemical data. The results showed that, during the first two cycles, C treatment obtained the best compensatory growth. Carcass lipid and water contents were inversely related, with body fat decrease. Fishes under B and C treatment during food restriction utilized liver and mesentery energy stores. These parameters were re-established in the refeeding phase, in all cycles.

Morphology changes induced by laser irradiation on disperse red 13 films prepared by physical vapor deposition

Surface morphology changes induced by argon laser irradiation (514 nm) on disperse red 13 (DR13) films prepared by physical vapor deposition (PVD) were investigated. Atomic force microscopy was used to characterize the irradiated sample for different periods of irradiation. Needle-shape structures are observed which are attributed to the symmetry of DR13 molecules. The film becomes increasingly closely packed with the irradiation, with lower root mean square roughness for long exposure times. This is due to photoisomerization of DR13 molecules and probably heating of the sample, which can provide the required mobility for the molecular rearrangement. The rearrangement is such that voids in the film are filled in upon irradiating the sample, thus decreasing the film roughness and increasing the packing.

GPS performance in the quantification of integrated water vapor in Amazonian regions

The Amazonian regions are characterized by large space-time variability in the humidity fields due to the intense convective process in those areas associated with the great humidity potential generated by high temperatures. An experiment denominated RACCI/DRY-TO-WET (RAdiation, Cloud, and Climate Interactions in the Amazonia during the DRY-TO-WET Transition Season) was carried out in the Brazilian Amazonian Region in 2002. The IWV values from GPS and other techniques, such as radiosondes, radiometer and humidity sounding satellites were used in this experiment to supply subsidies to evaluate the aerosols influence in the associated processes modifications to seasonality of atmospheric water vapor. Those regions are one of the most humid of the planet, where IWV (Integrated Water Vapor) average values are in the order of 50 kg/m2. As according the literature the IWV quantification using GPS has not been explored in those circumstances, the objective this paper is to present the preliminary results obtained in the evaluation of the GPS performance in Amazonian Regions when comparing with other techniques. The tendency measurement values indicated that the IWV values from GPS tend to be larger than those from radiosondes and smaller than those from radiometer. On the other hand, IWV values from GPS are very close of the average values supplied by radiosondes and radiometer. Due to the great amount of atmospheric water vapor existent in this region, the results obtained in the experiment in percentile terms are quite better than those found in the literature, which are around of 10%.

Effects of copper vapor laser radiation on the root canal wall of human teeth: A scanning electron microscope study

Objective: The aim of this study is to analyze the effects of copper vapor laser radiation on the radicular wall of human teeth. Materials and Methods: Immediately after the crowns of 10 human uniradicular teeth were cut along the cement-enamel junction, a chemical-surgical preparation of the radicular canals was completed. Then the roots were longitudinally sectioned to allow for irradiation of the surfaces of the dentin walls of the root canals. The hemi-roots were separated into two groups: one (control) with five hemi-roots that were not irradiated, and another (experimental) with 15 hemi-roots divided into three subgroups that were submitted to the following exposure times: 0.02,0.05, and 0.1 s. A copper vapor laser (510.6 nm) with a total average power of 6.5 W in green emission, frequency of 16.000 Hz, and pulse duration of 30 ns was used. Results: The results obtained by scanning electron microscope analysis showed the appearance of a cavity in the region of laser beam impact, with melting, recrystallization, and cracking on the edges of the dentin of the cavity due to heat diffusion. Conclusions: We determined that the copper vapor laser produces significant morphologic changes in the radicular wall of human teeth when using the parameters in this study. However, further research should be done to establish parameters that are compatible with dental structure in order to eliminate thermal damages. © Mary Ann Liebert, Inc.

Ciclos e seqüências deposicionais das formações Rio da Batateira e Santana (Andar Alagoas), Bacia do Araripe, Brasil

The Rio da Batateira e Santana formations, the latter with Crato, Ipubi and Romualdo members (Alagoas Stage, Aptian), were studied in four cored and logged wells from the eastern portion of Araripe Basin, Northeastern Brazil. The investigated section is 230 m-thick, and PS-14 well is the most representative, because it is the only one which sampled the evaporites of Ipubi Member. Nine facies cycles were identified, being formed by siliciclastics (estuarine, deltaic and lacustrine), mixed lithologies (lacustrine), carbonates, black shales and marls (lacustrine), and gypsum-anhydrite (lacustrine evaporite). The ordering of facies cycles furnished six depositional sequences. They were formed by siliciclastic, regressive-transgressive R-T cycles (S1 and S4, corresponding to Rio da Batateira Formation and to Santana Formation/Romualdo Member), by siliciclastics and carbonates, R-T cycles (S2, S3.1 and S3.2, corresponding to Crato Member), and by siliciclastic-carbonate, R-T cycles followed by evaporitic cycles (S3.3, referred to Ipubi Member). The last cycles correspond to concentration-dilution, C-D cycles of marine brines, which precipitated gypsum in the restricted lacustrine basin.

Stacking faults in SiCf/SiC composite obtained by chemical vapor reaction process

SiC fiber-reinforced SiC matrix composite (SiCf/SiC) is one of the leading candidates in ceramic materials for engineering applications due to its unique combination of properties such as high thermal conductivity, high resistance to corrosion and working conditions. Fiber-reinforced composites are materials which exhibit a significant improvement in properties like ductility in comparison to the monolithic SiC ceramic. The SiCf/SiC composite was obtained from a C/C composite precursor using convertion reaction under high temperature and controlled atmosphere. In this work, SiC phase presented the stacking faults in the structure, being not possible to calculate the unit cell size, symmetry and bond lengths but it seem equal card number 29-1129 of JCPDS.

Los ciclos en las economías en desarrollo

Incluye Bibliografía

A síndrome do hiperestímulo ovariano não influencia os resultados clínicos após ciclos de descongelamento de embriões provenientes de ciclos de ICSI

Objective: The objective of this study was evaluate if the embryos cryopreservation from OHSS patients Intracytoplasmic Sperm Injection (ICSI) cycles could be influence the clinical outcomes when compared to patients who receive oocytes from donors but the endometrium was not prepared and the embryos were cryopreserved. Methods: Fifty eight couples submitted to ICSI cycles in which 26 with OHSS clinical manifestation (OHSS group) and 32 couples who have received oocytes from donors (control group). The embryos were frozen on day+2 or +3of development. All patients included in this study had embryos crypreserved before the transfer, and in the thawing cycle, only the endometrium preparation was performed. The embryo survival, implantation, pregnancy and miscarriage rates were evaluated in the embryo thawing cycle. Results: There was no difference among the groups in relation to fertilization rate (OHSS: 71.89% ± 15.45, Control: 79.75% ± 21.68, p= 0.234), survival embryos rate (OHSS: 68.85 ± 21.10, Control: 59.53 ± 36.79, p= 0.233), high quality embryos rate (OHSS: 25.20 ± 23.90, Control: 27.40 ± 30.30, p= 0.760), implantation rate (OHSS: 17.9 ± 26.9, Control: 12.5 ± 23.7, p= 0.435), pregnancy rate (OHSS: 38.50, Control: 28.60, p= 0.441) and miscarriage rate (OHSS: 40.00, Control: 25.00, p= 0.332). Conclusion: Our findings suggest that clinical outcomes in freeze and thawing cycles were not affected by the presence of ovarian hyperstimulation syndrome clinical manifestation after controlled ovarian stimulation.

Flujo de potencia AC descentralizado para sistemas de potencia multi-área usando un método de descomposición basado en relajación Lagrangiana

A decentralized solution method to the AC power flow problem in power systems with interconnected areas is presented. The proposed methodology allows finding the operation point of a particular area without explicit knowledge of network data of adjacent areas, being only necessary to exchange border information related to the interconnection lines between areas. The methodology is based on the decomposition of the first-order optimality conditions of the AC power flow, which is formulated as a nonlinear programming problem. A 9-bus didactic system, the IEEE Three Area RTS-96 and the IEEE 118 bus test systems are used in order to show the operation and effectiveness of the distributed AC power flow.

Estados Unidos y China: ciclos económicos y políticas en un capitalismo maduro y uno naciente

Incluye Bibliografía

Locus no cromossomo 19 influencia positivamente o número de oócitos recuperados em ciclos estimulados

Objective: To evaluate if identified loci associated with normal age of menopause variation and early menopause can account for the poor response to controlled ovarian stimulation. Methods: A total of 71 patients, with age ≤ 35 years old, undergoing intracytoplasmic sperm injection were tested for three of the four newly identified genetic variants associated with normal variation in menopausal age and early menopause. Patients were divided into two groups: poor responder group (PR group, n=21) and normoresponder group (NR group, n=50). The influence of risk allele frequency on the response to controlled ovarian stimulation (COS) was evaluated. Logistic regression models were used. Results: There was no significant difference in the incidence of the genetic variants between NR and PR group. The risk allele for chromosome 19 variant (rs4806660) demonstrated a protective effect. The presence of a risk allele, either in homozygosis or in heterozygosis, was associated with an increased response to COS, resulting in an elevated number of follicles (Coef: 2.54, P= 0.041) and retrieved oocytes (Coef: 1.41, P= 0.041). Conclusions: Genetic variants rs244715, rs9379896 and rs4806660 are not risk factors for poor ovarian response. Instead, rs4806660 is associated with higher number of follicles and retrieved oocytes. It could be hypothesized that rs4806660 is associated with an increased response to gonadotrophin stimulus. © Todos os direitos reservados a SBRA - Sociedade Brasileira de Reprodução Assistida.

Perú: integración, especialización sectorial y sincronización de los ciclos internacionales del producto

Incluye Bibliografía

Optical, mechanical and surface properties of amorphous carbonaceous thin films obtained by plasma enhanced chemical vapor deposition and plasma immersion ion implantation and deposition

Diverse amorphous hydrogenated carbon-based films (a-C:H, a-C:H:F, a-C:H:N, a-C:H:Cl and a-C:H:Si:O) were obtained by radiofrequency plasma enhanced chemical vapor deposition (PECVD) and plasma immersion ion implantation and deposition (PIIID). The same precursors were used in the production of each pair of each type of film, such as a-C:H, using both PECVD and PIIID. Optical properties, namely the refractive index, n, absorption coefficient, α, and optical gap, ETauc, of these films were obtained via transmission spectra in the ultraviolet-visible near-infrared range (wavelengths from 300 to 3300 nm). Film hardness, elastic modulus and stiffness were obtained as a function of depth using nano-indentation. Surface energy values were calculated from liquid drop contact angle data. Film roughness and morphology were assessed using atomic force microscopy (AFM). The PIIID films were usually thinner and possessed higher refractive indices than the PECVD films. Determined refractive indices are consistent with literature values for similar types of films. Values of ETauc were increased in the PIIID films compared to the PECVD films. An exception was the a-C:H:Si:O films, for which that obtained by PIIID was thicker and exhibited a decreased ETauc. The mechanical properties - hardness, elastic modulus and stiffness - of films produced by PECVD and PIIID generally present small differences. An interesting effect is the increase in the hardness of a-C:H:Cl films from 1.0 to 3.0 GPa when ion implantation is employed. Surface energy correlates well with surface roughness. The implanted films are usually smoother than those obtained by PECVD. ©2013 Elsevier B.V. All rights reserved.

Centrales de fuerza a vapor condiciones de dimensionado

Incluye Bibliografía