Knowledge transfer through a transnational program partnership between Indonesian and Australian universities

As transnational programs are often advocated as a knowledge transfer opportunity between the partner universities, this case study investigated the knowledge transfer (KT) processes between Indonesian and Australian universities through an undergraduate transnational program partnership (TPP). An inter-organisational KT theoretical framework from the business sector was adapted and used to guide the study. The data were generated through semi-structured interviews with key university officers and document analysis from two partner universities. Based on the thematic analysis of the data, the findings demonstrated that the curriculum mapping process facilitated KT. However, different intentions of the partner universities in establishing the program led to declining interest to conduct more KT when expectations were not met. The Indonesian university’s existing knowledge, acquired from other sources through processes that were serendipitous and based on individual lecturers’ personal experience, meant that KT opportunities through the TPP were not always pursued despite written agreement to exchange knowledge with the Australian partner. While KT most evidently resulted in institutional capacity development for the Indonesian university’s school that managed the TPP, dissemination of knowledge to other units within the university was more challenging due to communication problems between the units. Hence, other universities seeking to conduct KT through TPPs need to understand each partner university's intention in establishing the partnerships, identify the institutions' needs before seeking knowledge input from the partner university and improve the communication between and within the universities for sustainable benefits.

Deathbed instructions and the assessment of capacity: A practical perspective

The assessment of capacity in the context of wills and advance care planning is a challenging task for modern practitioners with the increase in mentally disabling conditions, such as acquired brain injury. This challenge is only heightened in the situation where the assessment occurs at the client’s deathbed as there are the added elements of urgency, and emotional upheaval at the impending death of a loved one. This situation poses a minefield of problems a legal practitioner should be aware of, involving not only the assessment process but also potential professional liability issues. This presentation will address the practical considerations a legal professional should take into account when in this situation. We will focus on two discrete situations and the issues arising from them: first, where there has been an acquired brain injury and legal capacity is in question; and second, where a spinal injury has occurred which does not affect capacity, rather results in the inability to use conventional forms of communication to communicate his/her instructions. We will examine these case studies with a view to proposing a best practice model for legal practitioners when assessing capacity in this context.

Effect of upstream traffic signal on capacity of a downstream TWSC intersection

This paper investigates the platoon dispersion model that is part of the 2010 Highway Capacity Manual that is used for forecasting downstream traffic flows for analyzing both signalized and TWSC intersections. The paper focuses on the effect of platoon dispersion on the proportion of time blocked, the conflicting flow rate, and the capacity flow rate for the major street left turn movement at a TWSC intersection. The existing HCM 2010 methodology shows little effect on conflicting flow or capacity for various distances downstream from the signalized intersection. Two methods are suggested for computing the conflicting flow and capacity of minor stream movements at the TWSC intersection that have more desirable properties than the existing HCM method. Further, if the existing HCM method is retained, the results suggest that the upstream signals model be dropped from the HCM method for TWSC intersections.

The effect of β-alanine and NaHCO3 co-ingestion on buffering capacity and exercise performance with high-intensity exercise in healthy males

Introduction β-alanine (BAl) and NaHCO3 (SB) ingestion may provide performance benefits by enhancing concentrations of their respective physiochemical buffer counterparts, muscle carnosine and blood bicarbonate, counteracting acidosis during intense exercise. This study examined the effect of BAl and SB co-supplementation as an ergogenic strategy during high-intensity exercise. Methods Eight healthy males ingested either BAl (4.8 g day−1 for 4 weeks, increased to 6.4 g day−1 for 2 weeks) or placebo (Pl) (CaCO3) for 6 weeks, in a crossover design (6-week washout between supplements). After each chronic supplementation period participants performed two trials, each consisting of two intense exercise tests performed over consecutive days. Trials were separated by 1 week and consisted of a repeated sprint ability (RSA) test and cycling capacity test at 110 % Wmax (CCT110 %). Placebo (Pl) or SB (300 mg kgbw−1) was ingested prior to exercise in a crossover design to creating four supplement conditions (BAl-Pl, BAl-SB, Pl–Pl, Pl-SB). Results Carnosine increased in the gastrocnemius (n = 5) (p = 0.03) and soleus (n = 5) (p = 0.02) following BAl supplementation, and Pl-SB and BAl-SB ingestion elevated blood HCO3 − concentrations (p < 0.01). Although buffering capacity was elevated following both BAl and SB ingestion, performance improvement was only observed with BAl-Pl and BAl-SB increasing time to exhaustion of the CCT110 % test 14 and 16 %, respectively, compared to Pl–Pl (p < 0.01). Conclusion Supplementation of BAl and SB elevated buffering potential by increasing muscle carnosine and blood bicarbonate levels, respectively. BAl ingestion improved performance during the CCT110 %, with no aggregating effect of SB supplementation (p > 0.05). Performance was not different between treatments during the RSA test.

Speaking of supervision: A dialogic approach to building higher degree research supervision capacity in the creative arts

In the emergent field of creative practice higher degrees by research, first generation supervisors have developed new models of supervision for an unprecedented form of research that combines creative practice and written thesis. In a national research project, entitled 'Effective supervision of creative practice higher research degrees', we set out to capture and share early supervisors' insights, strategies and approaches to supporting their creative practice PhD students. From the insights we gained during the early interview process, we expanded our research methods in line with a distributed leadership model and developed a dialogic framework. This led us to unanticipated conclusions and unexpected recommendations. In this study, we primarily draw on philosopher and literary theorist Mikhail Bakhtin's dialogics to explain how giving precedence to the voices of supervisors not only facilitated the articulation of dispersed tacit knowledge, but also led to other 20 discoveries. These include the nature of supervisors' resistance to prescribed models, policies and central academic development programmes; the importance of polyvocality and responsive dialogue in enabling continued innovation in the field; the benefits to supervisors of reflecting, discussing and sharing practices with colleagues; and the value of distributed leadership and dialogue to academic development and supervision capacity building in research education.

A holistic, institution-wide approach to building sessional staff capacity

Sessional Academics enhance students’ learning experience by bringing a diverse range of perspectives and expertise into the classroom. As industry specialists, research students, and recent graduates who have excelled in their courses, they complement the discipline expertise of career academics. With increasing casualization of the academic workforce, Sessional Academics now deliver the majority of face-to-face undergraduate teaching in Australian Universities. To enable them to realize their full potential as effective contributors to student learning and course quality, universities need to offer effective training and access to advice and support and facilitate engagement in university life. However, in the face of complex and diverse contexts, overwhelming numbers, and the transitory nature of sessional cohorts, few universities have developed a comprehensive, systematic approach. During the past three years at QUT, we have set out to develop a multifaceted approach to Sessional Academic support and development. In this paper I will explain why and how we have done so, and describe the range of strategies and programs we have developed. They include a central academic development program, which is structured and scaffolded with learning objectives and outcomes, and aligned with a graduate certificate in Academic Practice; a Sessional Academic Success program, which deploys experienced, school-based sessional academic success advisors to provide local support, build a sense of community, and offer discipline focused academic development; an online, dialogic communication strategy; and opportunities to present and be acknowledged for good learning and teaching practices. Together, these strategies have impacted on sessional academics’ confidence, learning and teaching capacity, reflection and engagement.

Design expressions for the in-plane shear capacity of confined masonry shear walls containing squat panels

In-plane shear capacity formulation of reinforced masonry is commonly conceived as the sum of the capacities of three parameters, viz, the masonry, the reinforcement, and the precompression. The term “masonry” incorporates the aspect ratio of the wall without any regard to the aspect ratio of the panels inscribed (and hence confined) by the vertical and the horizontal reinforced grout cores. This paper proposes design expressions in which the aspect ratio of such panels is explicitly included. For this purpose, the grouted confining cores are regarded as a grid of confining elements within which the panels are positioned. These confined masonry panels are then considered as building blocks for multi-bay, multi-storied confined masonry shear walls and analyzed using an experimentally validated macroscopic finite-element model. Results of the analyzes of 161 confined masonry walls containing panels of height to length ratio less than 1.0 have been regressed to formulate design expressions. These expressions have been first validated using independent test data sets and then compared with the existing equations in some selected international design standards. The concept of including the unreinforced masonry panel aspect ratio as an additional term in the design expression for partially grouted/confined masonry shear walls is recommended based on the conclusions from this paper.

Bearing capacity of cold-formed unlipped channels with restrained flanges under EOF and IOF load cases

Bearing failure is a form of localized failure that occurs when thin-walled cold-formed steel sections are subjected to concentrated loads or support reactions. To determine the bearing capacity of cold-formed channel sections, a unified design equation with different bearing coefficients is given in the current North American specification AISI S100 and the Australian/New Zealand standard AS/NZS 4600. However, coefficients are not available for unlipped channel sections that are normally fastened to supports through their flanges. Eurocode 3 Part 1.3 includes bearing capacity equations for different load cases, but does not distinguish between fastened and unfastened support conditions. Therefore, an experimental study was conducted to determine the bearing capacities of these sections as used in floor systems. Twenty-eight web bearing tests on unlipped channel sections with restrained flanges were conducted under End One Flange (EOF) and Interior One Flange (IOF) load cases. Using the results from this study, a new equation was proposed within the AISI S100 and AS/NZS 4600 guidelines to determine the bearing capacities of cold-formed unlipped channels with flanges fastened to supports. A new design rule was also proposed based on the direct strength method.

Transition: Exchange establishing a visual arts practice based on personal pedagogy

There is a perceived tension in the relationship between the roles of art teacher and artist that led to the question: can an art teacher use their professional training and experience to establish an authentic artistic identity? This self-study tracked and analysed how the process of making her own art enabled an art teacher to also identify as an artist. Drawing on Lamina, the public exhibition of her multimedia artworks, the final exegesis proposes five conditions for art teachers in developing their own art practice: developing an identity as artist, using time and space mindfully, tolerating uncertainty, mentoring, and privileging the process.

Materials and technologies for energy conversion, saving and storage: A global network enabling capacity-building for sustainable energy in developing countries

Access to energy is a fundamental component of poverty abatement. People who live in homes without electricity are often dependent on dirty, time-consuming and disproportionately expensive solid fuel sources for heating and cooking. [1] In developing countries, the Human Development Index (HDI), which comprises measures of standard of living, longevity and educational attainment, increases rapidly with per capita electricity use. [2] For these reasons the United Nations has been making a concerted effort to promote global access to energy, first by naming 2012 the Year of Sustainable Energy for All, [3] and now by declaring 2014-2024 the Decade of Sustainable Energy for All. [4]

Evaluation of ion exchange as a pre-treatment option for coal seam gas water

The Coal Seam Gas (CSG) industry in Australia has grown significantly in recent years. During the gas extraction process, water is also recovered which is brackish in character. In order to facilitate beneficial reuse of the water, the CSG industry has primarily invested in Reverse Osmosis (RO) as the primary method for associated water desalination. However, the presence of alkaline earth ions in the water combined with the inherent alkalinity of the water may result in RO membrane scaling. Consequently, weak acid cation (WAC) synthetic ion exchange resins were investigated as a potential solution to this potential problem. It was shown that resins were indeed highly efficient at treating single and multi-component solutions of alkaline earth ions. The interaction of the ions with the resin was found to be considerably more complex that previously reported.

High Oxygen Storage Capacity and High Rates of CO Oxidation and NO Reduction Catalytic Properties of Ce1-xSnxO2 and Ce0.78Sn0.2Pd0.02O2-delta

Ce1-xSnxO2 (x = 0.1-0.5) solid solution and its Pd substituted analogue have been prepared by a single step solution combustion method using tin oxalate precursor. The compounds were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and H-2/temperature programmed redution (TPR) studies. The cubic fluorite structure remained intact up to 50% of Sri substitution in CeO2, and the compounds were stable up to 700 C. Oxygen storage capacity of Ce1-xSnxO2 was found to be much higher than that of Ce1-xZrxO2 due to accessible Ce4+/Ce3+ and Sn4+/Sn2+ redox couples at temperatures between 200 and 400 C. Pd 21 ions in Ce0.78Sn0.2Pd0.02O2-delta are highly ionic, and the lattice oxygen of this catalyst is highly labile, leading to low temperature CO to CO2 conversion. The rate of CO oxidation was 2 mu mol g(-1) s(-1) at 50 degrees C. NO reduction by CO with 70% N-2 selectivity was observed at similar to 200 degrees C and 100% N-2 selectivity below 260 degrees C with 1000-5000 ppm NO. Thus, Pd2+ ion substituted Ce1-xSnxO2 is a superior catalyst compared to Pd2+ ions in CeO2, Ce1-xZrxO2, and Ce1-xTixO2 for low temperature exhaust applications due to the involvement of the Sn2+/Sn4+ redox couple along with Pd2+/Pd-0 and Ce4+/Ce3+ couples.

Bearing capacity of circular footing on geocell-sand mattress overlying clay bed with void

The potential benefits of providing geocell reinforced sand mattress over clay subgrade with void have been investigated through a series of laboratory scale model tests. The parameters varied in the test programme include, thickness of unreinforced sand layer above clay bed, width and height of geocell mattress, relative density of the sand fill in the geocells, and influence of an additional layer of planar geogrid placed at the base of the geocell mattress. The test results indicate that substantial improvement in performance can be obtained with the provision of geocell mattress, of adequate size, over the clay subgrade with void. In order to have beneficial effect, the geocell mattress must spread beyond the void at least a distance equal to the diameter of the void. The influence of the void over the performance of the footing reduces for height of geocell mattress greater than 1.8 times the diameter of the footing. Better improvement in performance is obtained for geocells filled with dense soil. (C) 2008 Elsevier Ltd. All rights reserved.

A mathematical framework for expanding a railway’s theoretical capacity

Analytical techniques for measuring and planning railway capacity expansion activities have been considered in this article. A preliminary mathematical framework involving track duplication and section sub divisions is proposed for this task. In railways these features have a great effect on network performance and for this reason they have been considered. Additional motivations have also arisen from the limitations of prior models that have not included them.