Same- and Other-Sex Victimization : Risk Factors, Consequences, and Protection by Peers

Bullying can be viewed as goal-oriented behavior in the strive for dominance and prestige in the peer group (Salmivalli, 2010). To ensure the effectiveness of their power demonstrations, bullies often choose targets from among their vulnerable peers (Salmivalli, 2010; Veenstra et al., 2007). A large number of studies have also shown that victimization has severe consequences for the victims’ psychosocial adjustment (Reijntjes, Kamphuis, Prinzie, & Telch, 2010; Ttofi, Farrington, Lösel, & Loeber, 2011). In this thesis I investigate – based on three empirical studies – whether similar dynamics on the risk factors and consequences apply to same- and other-sex victimization. In the empirical studies, we used the data from the randomized control trial of the KiVa antibullying program for the elementary school grades 4–6 (2007–2008), and for the middle school grades 7–9 (2008–2009). We measured same- and other-sex victimization, and victims’ defending relationships by dyadic questions: “By which classmates are you victimized?” and “By which classmates are you supported, comforted, or defended?” In addition, we used self-reports and peer reports to measure adjustment and social status. The findings imply that other-sex victimization may be challenging for antibullying work. First, although targets of bullying seemed to be selected from among vulnerable peers for the most part, perceived popularity increased the risks of other-sex victimization. Popularity of these victims may falsely lead to an impression that the victims are doing well. Second, the consequences considering victims’ later psychosocial adjustment were alarming concerning girls bullied by boys. Thus, despite the fact that the targets may be perceived as popular, other-sex victimization can have even more severe consequences than same-sex victimization. Third, we found that defending relationships were mostly same-sex relationships, and consequently, we may ask whether defending is effective against other-sex bullies. Finally, the KiVa antibullying program was less effective against other-sex victimization in the adolescent sample. The findings altogether emphasize the importance of taking into account the sex composition of the bully-victim dyad, both considering future research on bullying and in the antibullying work with children and adolescents.

Adult education policy in the European Union during the Lisbon decade : the shift to vocational adult learning and work skills matching

This doctoral dissertation investigates the adult education policy of the European Union (EU) in the framework of the Lisbon agenda 2000–2010, with a particular focus on the changes of policy orientation that occurred during this reference decade. The year 2006 can be considered, in fact, a turning point for the EU policy-making in the adult learning sector: a radical shift from a wide--ranging and comprehensive conception of educating adults towards a vocationally oriented understanding of this field and policy area has been observed, in particular in the second half of the so--called ‘Lisbon decade’. In this light, one of the principal objectives of the mainstream policy set by the Lisbon Strategy, that of fostering all forms of participation of adults in lifelong learning paths, appears to have muted its political background and vision in a very short period of time, reflecting an underlying polarisation and progressive transformation of European policy orientations. Hence, by means of content analysis and process tracing, it is shown that the new target of the EU adult education policy, in this framework, has shifted from citizens to workers, and the competence development model, borrowed from the corporate sector, has been established as the reference for the new policy road maps. This study draws on the theory of governance architectures and applies a post-ontological perspective to discuss whether the above trends are intrinsically due to the nature of the Lisbon Strategy, which encompasses education policies, and to what extent supranational actors and phenomena such as globalisation influence the European governance and decision--making. Moreover, it is shown that the way in which the EU is shaping the upgrading of skills and competences of adult learners is modeled around the needs of the ‘knowledge economy’, thus according a great deal of importance to the ‘new skills for new jobs’ and perhaps not enough to life skills in its broader sense which include, for example, social and civic competences: these are actually often promoted but rarely implemented in depth in the EU policy documents. In this framework, it is conveyed how different EU policy areas are intertwined and interrelated with global phenomena, and it is emphasised how far the building of the EU education systems should play a crucial role in the formation of critical thinking, civic competences and skills for a sustainable democratic citizenship, from which a truly cohesive and inclusive society fundamentally depend, and a model of environmental and cosmopolitan adult education is proposed in order to address the challenges of the new millennium. In conclusion, an appraisal of the EU’s public policy, along with some personal thoughts on how progress might be pursued and actualised, is outlined.

“Development work thesis” as a tool for continuing professional education

Julkaisumaa: 158 TW TWN Taiwan

Scientific creativity and diversity of physical work environment: framework development

The aim of this research was to develop a framework to analyze how physical environment influences scientific creativity. Due to the relative novelty of this topic, there is still a gap in the unified method to study connection between physical environment and creativity. Therefore, in order to study this issue deeply, the qualitative method was used (interviews and qualitative questionnaire). Scientists (PhD students and senior researchers) of Graduate School of Management were interviewed to build the model and one expert interview was conducted to assess its validity. The model highlights several dimensions via which physical environment can influence scientific creativity: Comfort, Instruments and Diversity. Comfort and Instruments are considered to be related mostly to productivity, an initial requirement for creativity, while Diversity is the factor responsible for supporting all the stages of scientific creative process. Thus, creative physical environment is not one place by its nature, but an aggregative phenomenon. Due to two levels of analysis, the model is named the two-level model of creative physical environment.

Current State of Repository Interoperability: Work by the Confederation of Open Access Repositories (COAR)

Panel at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Let's do data research work: the creation of a portal with research information from Catalan Universities

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Laser cladding with scanning optics

Scanning optics create different types of phenomena and limitation to cladding process compared to cladding with static optics. This work concentrates on identifying and explaining the special features of laser cladding with scanning optics. Scanner optics changes cladding process energy input mechanics. Laser energy is introduced into the process through a relatively small laser spot which moves rapidly back and forth, distributing the energy to a relatively large area. The moving laser spot was noticed to cause dynamic movement in the melt pool. Due to different energy input mechanism scanner optic can make cladding process unstable if parameter selection is not done carefully. Especially laser beam intensity and scanning frequency have significant role in the process stability. The laser beam scanning frequency determines how long the laser beam affects with specific place local specific energy input. It was determined that if the scanning frequency in too low, under 40 Hz, scanned beam can start to vaporize material. The intensity in turn determines on how large package this energy is brought and if the intensity of the laser beam was too high, over 191 kW/cm2, laser beam started to vaporize material. If there was vapor formation noticed in the melt pool, the process starts to resample more laser alloying due to deep penetration of laser beam in to the substrate. Scanner optics enables more flexibility to the process than static optics. The numerical adjustment of scanning amplitude enables clad bead width adjustment. In turn scanner power modulation (where laser power is adjusted according to where the scanner is pointing) enables modification of clad bead cross-section geometry when laser power can be adjusted locally and thus affect how much laser beam melts material in each sector. Power modulation is also an important factor in terms of process stability. When a linear scanner is used, oscillating the scanning mirror causes a dwell time in scanning amplitude border area, where the scanning mirror changes the direction of movement. This can cause excessive energy input to this area which in turn can cause vaporization and process instability. This process instability can be avoided by decreasing energy in this region by power modulation. Powder feeding parameters have a significant role in terms of process stability. It was determined that with certain powder feeding parameter combinations powder cloud behavior became unstable, due to the vaporizing powder material in powder cloud. Mainly this was noticed, when either or both the scanning frequency or powder feeding gas flow was low or steep powder feeding angle was used. When powder material vaporization occurred, it created vapor flow, which prevented powder material to reach the melt pool and thus dilution increased. Also powder material vaporization was noticed to produce emission of light at wavelength range of visible light. This emission intensity was noticed to be correlated with the amount of vaporization in the powder cloud.

Connections that work – Linked Open Data demystified

Esitys Kirjastoverkkopäivillä 22.10.2014 Helsingissä – Presentation of Jakob Voß at the Library Network Days, October 22, 2014 in Helsinki.

Solid-state reference and ion-selective electrodes : towards portable potentiometric sensing

Potentiometric sensors are very attractive tools for chemical analysis because of their simplicity, low power consumption and low cost. They are extensively used in clinical diagnostics and in environmental monitoring. Modern applications of both fields require improvements in the conventional construction and in the performance of the potentiometric sensors, as the trends are towards portable, on-site diagnostics and autonomous sensing in remote locations. The aim of this PhD work was to improve some of the sensor properties that currently hamper the implementation of the potentiometric sensors in modern applications. The first part of the work was concentrated on the development of a solid-state reference electrode (RE) compatible with already existing solid-contact ion-selective electrodes (ISE), both of which are needed for all-solid-state potentiometric sensing systems. A poly(vinyl chloride) membrane doped with a moderately lipophilic salt, tetrabutylammonium-tetrabutylborate (TBA-TBB), was found to show a satisfactory stability of potential in sample solutions with different concentrations. Its response time was nevertheless slow, as it required several minutes to reach the equilibrium. The TBA-TBB membrane RE worked well together with solid-state ISEs in several different situations and on different substrates enabling a miniature design. Solid contacts (SC) that mediate the ion-to-electron transduction are crucial components of well-functioning potentiometric sensors. This transduction process converting the ionic conduction of an ion-selective membrane to the electronic conduction in the circuit was studied with the help of electrochemical impedance spectroscopy (EIS). The solid contacts studied were (i) the conducting polymer (CP) poly(3,4-ethylienedioxythiophene) (PEDOT) and (ii) a carbon cloth having a high surface area. The PEDOT films were doped with a large immobile anion poly(styrene sulfonate) (PSS-) or with a small mobile anion Cl-. As could be expected, the studied PEDOT solid-contact mediated the ion-toelectron transduction more efficiently than the bare glassy carbon substrate, onto which they were electropolymerized, while the impedance of the PEDOT films depended on the mobility of the doping ion and on the ions in the electrolyte. The carbon cloth was found to be an even more effective ion-to-electron transducer than the PEDOT films and it also proved to work as a combined electrical conductor and solid contact when covered with an ion-selective membrane or with a TBA-TBB-based reference membrane. The last part of the work was focused on improving the reproducibility and the potential stability of the SC-ISEs, a problem that culminates to the stability of the standard potential E°. It was proven that the E° of a SC-ISE with a conducting polymer as a solid contact could be adjusted by reducing or oxidizing the CP solid contact by applying current pulses or a potential to it, as the redox state of the CP solid-contact influences the overall potential of the ISE. The slope and thus the analytical performance of the SC-ISEs were retained despite the adjustment of the E°. The shortcircuiting of the SC-ISE with a conventional large-capacitance RE was found to be a feasible instrument-free method to control the E°. With this method, the driving force for the oxidation/reduction of the CP was the potential difference between the RE and the SC-ISE, and the position of the adjusted potential could be controlled by choosing a suitable concentration for the short-circuiting electrolyte. The piece-to-piece reproducibility of the adjusted potential was promising, and the day-today reproducibility for a specific sensor was excellent. The instrumentfree approach to control the E° is very attractive considering practical applications.

Work and non-work : on work and meaning

I den politiska retoriken florerar debattinlägg om arbetslivet, och målsättningen är för det mesta att så många som möjligt ska arbeta så länge som möjligt. Att skapa jobb och minimera arbetslösheten ses som de främsta utmaningarna. På ett individuellt plan beskrivs arbete ofta som personligt självförverkligande eller som en nödvändig form av inkomst som kräver att livet struktureras enligt behovet av sysselsättning. I avhandlingen diskuteras hur de här till synes självklara rollerna som arbete spelar kan sägas neutralisera arbete. Med detta menas att kontroverser kring arbetets mening åsidosätts så att politiskt och etiskt grundläggande frågor om ett gott liv och mänskliga gemenskaper inte ges plats. Genom att gå i dialog med kritiska tänkare som Hannah Arendt, André Gorz, Kathi Weeks, Karl Marx och Richard Sennett diskuteras riskerna med att behandla arbete som en resurs, ett gemensamt samhällsprojekt eller individuellt självförverkligande. Vad är nödvändigt arbete? Vad innebär det att arbete är en vara? Vad är problemet med fragmentering av arbete? Det sägs ofta att arbete har blivit alltmer gränslöst – är detta något positivt eller negativt? Utifrån sådana frågor tar avhandlingen fasta på spänningar i arbetets roll i våra liv och i samhället. Genom att artikulera spänningar utmanas en neutralisering av arbetets etiskt och politiskt brännbara dimensioner. Avhandlingen syftar därmed till att lyfta fram ständigt pågående sätt att ifrågasätta och reflektera kring arbetets mening.

How computer programmers work : understanding software development in practise

Hur arbetar en framgångsrik programmerare? Uppgifterna att programmera datorspel och att programmera industriella, säkerhetskritiska system verkar tämligen olika. Genom en noggrann empirisk undersökning jämför och kontrasterar avhandlingen dessa två former av programmering och visar att programmering innefattar mer än teknisk förmåga. Med utgångspunkt i hermeneutisk och retorisk teori och med hjälp av både kulturvetenskap och datavetenskap visar avhandlingen att programmerarnas tradition och värderingar är grundläggande för deras arbete, och att båda sorter av programmering kan uppfattas och analyseras genom klassisk texttolkningstradition. Dessutom kan datorprogram betraktas och analyseras med hjälp av klassiska teorier om talproduktion i praktiken - program ses då i detta sammanhang som ett slags yttranden. Allt som allt förespråkar avhandlingen en återkomst till vetenskapens grunder, vilka innebär en ständig och oupphörlig cyklisk rörelse mellan att erfara och att förstå. Detta står i kontrast till en reduktionistisk syn på vetenskapen, som skiljer skarpt mellan subjektivt och objektivt, och på så sätt utgår från möjligheten att uppnå fullständigt vetande. Ofullständigt vetande är tolkandets och hermeneutikens domän. Syftet med avhandlingen är att med hjälp av exempel demonstrera programmeringens kulturella, hermeneutiska och retoriska natur.

Sleep, ageing and night work

Studies have shown that the frequency or worsening of sleep disorders tends to increase with age and that the ability to perform circadian adjustments tends to decrease in individuals who work the night shift. This condition can cause consequences such as excessive sleepiness, which are often a factor in accidents that occur at work. The present study investigated the effects of age on the daytime and nighttime sleep patterns using polysomnography (PSG) of long-haul bus drivers working fixed night or day shifts. A total of 124 drivers, free of sleep disorders and grouped according to age (<45 years, N = 85, and ≥45 years, N = 39) and PSG timing (daytime (D) PSG, N = 60; nighttime (N) PSG, N = 64) participated in the study. We observed a significant effect of bedtime (D vs N) and found that the length of daytime sleep was shorter [D: <45 years (336.10 ± 73.75 min) vs N: <45 years (398 ± 78.79 min) and D: ≥45 years (346.57 ± 43.17 min) vs N: ≥45 years (386.44 ± 52.92 min); P ≤ 0.05]. Daytime sleep was less efficient compared to nighttime sleep [D: <45 years (78.86 ± 13.30%) vs N: <45 years (86.45 ± 9.77%) and D: ≥45 years (79.89 ± 9.45%) and N: ≥45 years (83.13 ± 9.13%); P ≤ 0.05]. An effect of age was observed for rapid eye movement sleep [D: <45 years (18.05 ± 6.12%) vs D: ≥45 years (15.48 ± 7.11%) and N: <45 years (23.88 ± 6.75%) vs N: ≥45 years (20.77 ± 5.64%); P ≤ 0.05], which was greater in younger drivers. These findings are inconsistent with the notion that older night workers are more adversely affected than younger night workers by the challenge of attempting to rest during the day.

Relationship between work rate and oxygen uptake in mitochondrial myopathy during ramp-incremental exercise

We determined the response characteristics and functional correlates of the dynamic relationship between the rate (Δ) of oxygen consumption ( O2) and the applied power output (work rate = WR) during ramp-incremental exercise in patients with mitochondrial myopathy (MM). Fourteen patients (7 males, age 35.4 ± 10.8 years) with biopsy-proven MM and 10 sedentary controls (6 males, age 29.0 ± 7.8 years) took a ramp-incremental cycle ergometer test for the determination of the O2 on-exercise mean response time (MRT) and the gas exchange threshold (GET). The ΔO2/ΔWR slope was calculated up to GET (S1), above GET (S2) and over the entire linear portion of the response (S T). Knee muscle endurance was measured by isokinetic dynamometry. As expected, peak O2 and muscle performance were lower in patients than controls (P < 0.05). Patients had significantly lower ΔO2/ΔWR than controls, especially the S2 component (6.8 ± 1.5 vs 10.3 ± 0.6 mL·min-1·W-1, respectively; P < 0.001). There were significant relationships between ΔO2/ΔWR (S T) and muscle endurance, MRT-O2, GET and peak O2 in MM patients (P < 0.05). In fact, all patients with ΔO2/ΔWR below 8 mL·min-1·W-1 had severely reduced peak O2 values (<60% predicted). Moreover, patients with higher cardiopulmonary stresses during exercise (e.g., higher Δ ventilation/carbon dioxide output and Δ heart rate/ΔO2) had lower ΔO2/ΔWR (P < 0.05). In conclusion, a readily available, effort-independent index of aerobic dysfunction during dynamic exercise (ΔO2/ΔWR) is typically reduced in patients with MM, being related to increased functional impairment and higher cardiopulmonary stress.

Dynamics of chest wall volume regulation during constant work rate exercise in patients with chronic obstructive pulmonary disease

This study evaluated the dynamic behavior of total and compartmental chest wall volumes [(V CW) = rib cage (V RC) + abdomen (V AB)] as measured breath-by-breath by optoelectronic plethysmography during constant-load exercise in patients with stable chronic obstructive pulmonary disease. Thirty males (GOLD stages II-III) underwent a cardiopulmonary exercise test to the limit of tolerance (Tlim) at 75% of peak work rate on an electronically braked cycle ergometer. Exercise-induced dynamic hyperinflation was considered to be present when end-expiratory (EE) V CW increased in relation to resting values. There was a noticeable heterogeneity in the patterns of V CW regulation as EEV CW increased non-linearly in 17/30 "hyperinflators" and decreased in 13/30 "non-hyperinflators" (P < 0.05). EEV AB decreased slightly in 8 of the "hyperinflators", thereby reducing and slowing the rate of increase in end-inspiratory (EI) V CW (P < 0.05). In contrast, decreases in EEV CW in the "non-hyperinflators" were due to the combination of stable EEV RC with marked reductions in EEV AB. These patients showed lower EIV CW and end-exercise dyspnea scores but longer Tlim than their counterparts (P < 0.05). Dyspnea increased and Tlim decreased non-linearly with a faster rate of increase in EIV CW regardless of the presence or absence of dynamic hyperinflation (P < 0.001). However, no significant between-group differences were observed in metabolic, pulmonary gas exchange and cardiovascular responses to exercise. Chest wall volumes are continuously regulated during exercise in order to postpone (or even avoid) their migration to higher operating volumes in patients with COPD, a dynamic process that is strongly dependent on the behavior of the abdominal compartment.

Disentangling the effects of insomnia and night work on cardiovascular diseases: a study in nursing professionals

Cardiovascular diseases (CVDs) are known to be associated with poor sleep quality in general populations, but they have not been consistently associated with specific work schedules. Studies of CVD generally do not simultaneously consider sleep and work schedules, but that approach could help to disentangle their effects. We investigated the association between insomnia and a self-reported physician diagnosis of CVD in day and night workers, considering all sleep episodes during nocturnal and diurnal sleep. A cross-sectional study was conducted in 1307 female nursing professionals from 3 public hospitals, using baseline data from the “Health and Work in Nursing - a Cohort Study.” Participants were divided into two groups: i) day workers with no previous experience in night shifts (n=281) and whose data on insomnia were related to nocturnal sleep and ii) those who worked exclusively at night (n=340) and had data on both nocturnal and diurnal sleep episodes, as they often sleep at daytime. Multiple logistic regression analysis was performed. Among day workers, insomnia complaints increased the odds of CVD 2.79-fold (95% CI=1.01-6.71) compared with workers who had no complaints. Among night workers, reports of insomnia during both nocturnal and diurnal sleep increased the odds of reported CVD 3.07-fold (95% CI=1.30-7.24). Workers with insomnia had similar probabilities of reporting CVD regardless of their work schedule, suggesting a relationship to insomnia and not to night work per se. The results also highlighted the importance of including evaluation of all sleep episodes (diurnal plus nocturnal sleep) for night workers.