Density, sp3 content and internal layering of DLC films by X-ray reflectivity and electron energy loss spectroscopy

A variety of hydrogenated and non-hydrogenated amorphous carbon thin films have been characterized by means of grazing-incidence X-ray reflectivity (XRR) to give information about their density, thickness, surface roughness and layering. We used XRR to validate the density of ta-C, ta-C:H and a-C:H films derived from the valence plasmon in electron energy loss spectroscopy measurements, up to 3.26 and 2.39 g/cm3 for ta-C and ta-C:H, respectively. By comparing XRR and electron energy loss spectroscopy (EELS) data, we have been able for the first time to fit a common electron effective mass of m*/me = 0.87 for all amorphous carbons and diamond, validating the `quasi-free' electron approach to density from valence plasmon energy. While hydrogenated films are found to be substantially uniform in density across the film, ta-C films grown by the filtered cathodic vacuum arc (FCVA) show a multilayer structure. However, ta-C films grown with an S-bend filter show a high uniformity and only a slight dependence on the substrate bias of both sp3 and layering.

Simple model of electronic density of states of graphite and its application to the investigation of superlattices

A model of graphite which is easy to comprehend and simple to implement for the simulation of scanning tunneling microscopy (STM) images is described. This model simulates the atomic density of graphite layers, which in turn correlates with the local density of states. The mechanism and construction of such a model is explained with all the necessary details which have not been explicitly reported before. This model is applied to the investigation of rippling fringes which have been experimentally observed on a superlattice, and it is found that the rippling fringes are not related to the superlattice itself. A superlattice with abnormal topmost layers interaction is simulated, and the result affirms the validity of the moiré rotation pattern assumption. The "odd-even" transition along the atomic rows of a superlattice is simulated, and the simulation result shows that when there is more than one rotated layer at the top, the "odd-even" transition will not be manifest. ©2005 The Japan Society of Applied Physics.

Estimating the population density of prawns by the use of catch per effort data from prawn trawlers at Chilaw

The penaeid prawns of Sri Lanka from estuaries and sea are an important commercial fishery resource. This resource has been exploited over the last century or more by local fishermen using indigenous fishing gear from locally sail-driven or oar-driven fishing crafts. In more recent times, the Fisheries Research Division of the Department of Fisheries undertook surveys of the seas and lagoons of Sri Lanka with a view to ascertain whether any unexploited resources of prawns existed. These publications deal with the species composition, biology, distribution and abundance in the lagoons and inshore waters of Sri Lanka.

High-density comparative BAC mapping in the black muntjac (Muntiacus crinifrons): Molecular cytogenetic dissection of the origin of MCR 1p+4 in the X1X2Y1Y2Y3 sex chromosome system

The black muntjac (Muntiacus crinifrons, 2n = 8 female/9 male) is a critically endangered mammalian species that is confined to a narrow region of southeastern China. Male black muntjacs have an astonishing X1X2Y1Y2Y3 sex chromosome system, unparalleled i

CpG island density and its correlations with genomic features in mammalian genomes

Background: CpG islands, which are clusters of CpG dinucleotides in GC-rich regions, are considered gene markers and represent an important feature of mammalian genomes. Previous studies of CpG islands have largely been on specific loci or within one geno

Optimisation of stocking density of Thai silver barb (Barbodes gonionotus Bleeker) in the duckweed-fed four species polyculture system

The optimisation of stocking density of Thai silver barb (Barbodes gonionotus) in the polyculture with Labeo rohita, Catla cat/a and Cyprinus cmpio was investigated in seasonal ponds. Three different stocking densities of Thai silver barb i.e., 5,000, 6,000 and 7,000 fingerlings ha-1 were tested with stocking density of carps fixed at the rate of 10,000 fingerlings ha-1 Duckweed was applied to all ponds supplemented with rice bran and oil cake. There were no significant variations on either water quality parameters or abundance of planktonic organisms due to the different stocking densities of silver barb. A significantly higher fish production (pdensity of Thai silver barb was maintained.

Influence of stocking density on the culture potential of freshwater catfish Pangasius pangasius in pond

Influence of stocking density on the production of freshwater catfish Pangasius pangasius with formulated feed in ponds was studied. The fish fry were collected from the Meghna river near Chandpur which is a natural breeding ground of this fish. Three stocking densities chosen during this experiment were 5000, 8000 and 11000 fry/ha with an initial weight of 42.57 ±2.51 g. The formulated feed was prepared in the laboratory which contained 45% fish meal, 30% mustard oil cake, 15% wheat bran and 10% rice bran to supply 40.48% protein in feed. The growth of P. pangasius in terms of net weight gain was 409.49, 266.49 and 236.37 g at the 5000/ha, 8000/ha and 11000/ha stocking densities respectively, which was statistically significant (p<0.05). High food conversion ratio (FCR) was also observed during this research study which ranged between 7.06 to 7.72. A production of 2.6 tons/ha at the stocking density of 11000/ha; 2.13 tons/ha at the stocking density of 8000/ha and 2.04 tons/ha at the stocking density of 5000/ha was obtained, while the growth of individual fish at the end of experiment was in opposite order. The result of this experiment indicates that stocking density has significant influence on the culture potential of freshwater catfish P.pangasius.

Polyculture of freshwater prawn, Macrobrachium rosenbergii, de Man with carps: effects of prawn stocking density

Effects of three stocking densities, viz., 35, 50 and 65/decimal (1 decimal = 40.48 m2) of juvenile freshwater prawn (Macrobrachium rosenbergii) on prawn and fish production were tested in a polycuture system with silver carp (Hypophthalmichthys molitrix), catla (Catla catla), Grass carp (Ctenophmyngodon idella) and silver barb (Barbodes gonionotus). The fish stocking density was 19/decimal with the species combination of silver carp-10, catlac-6, grass carp-1 and silver barb-2. In a 8-month culture period, the prawn yield 423 ± 144 kg/ha was significantly lower (P< 0.5) with the prawn stocking density of 35/decimal than that of 548 ± 178 kg/ha and 662 ± 243 kg/ha with 50 and 65/decimal respectively. The fish production (1844-1891 kg/ha) did not differ significantly (p <0.05) among the three treatments indicating that prawn stocking densities had no influence on fish yield. The lower mean harvest weight (62 g) and survival rate (67 g) and higher yield (2.67 kg/decimal) with the highest stocking rate of prawn reveals that as density was increased, prawn survival and individual weight at harvest decreased but total yield increased.

Effect of stocking density on the production of common carp (Cyprinus carpio Lin.) in cages at Kaptai lake, Bangladesh

Growth, survival and food conversion ratio (FCR) of Cyprinus carpio in cages at different stocking density were studied in Kaptai lake. Fingerlings of common carp (12.47 ± 4.29 g) were stocked at 25/m2 , 50/m2 and 75/m2 each with replication in six floating net cages each of Sm x Sm x 4m and reared for 240 days. The growth rate was inversely related to the stocking density with the mean weights of 325.5 ± 11.74 g, 268.99± 8.44 g and 167.0 ± 11.66 g at low, medium and high densities, respectively. At harvest, standing crop biomass averaged 7 .82, 12.83 and 11.58 kg with the survival of 98.9%, 97.6% and 94.4% and food conversion ratios of 4.51, 3.82 and 4.21 for the above three densities, respectively. Weight gain and production at density 25 fish/m 2 were significantly different (p< 0.01) from other two densities. Water quality was not affected in the cages having different stocking densities.

Reproductive biology of freshwater crab, Paratelphusa spinigera, Wood Mason (Crustacea-Decapoda)

This study was aimed to analyze the annual reproductive cycle of the freshwater crab Paratelphusa spinigera (Wood Mason, 1871). P. spinigera breeds only once in a year; hence, it is a monovoltine species. Gonad maturation, changes in abdomen shape, size and female maturity index (FMI) marked the onset of sexual maturity of female P. spinigera. The occurrence of berried females marked the onset of breeding season. The fecundity of P. spinigera ranged from 533 to 1306 in number, with an average of 699.11 ± 217.38. The correlation of fecundity with carapace width and body weight was also found to be positively significant (r = 0. 780 and 0.933, respectively). The eggs were carried on the pleopods and nurtured for approximately 30-35 days, until the eggs hatch, showing perfect maternal care. The FMI values ranging between 0.70 and 0.80 represented immature stage of gonadal development. When the FMI ranged from 0.91 to 1.00, all stages of gonadal development, i.e. developing, maturing and mature stages were observed. The females with fully ripe ovary had FMI values greater than 1.00.

Studies on the influence of moisture and specific gravity on the strength properties of mango wood (Mangifera indica)

Influence of moisture and specific gravity on the strength of mango wood is discussed. The co-efficient of correlation between specific gravity and breaking strength was found to be non-significant. The relation of strength and moisture was found to be highly significant. The mean strength values indicated a reduction in strength when the moisture increased from 8.5 to 18.8%. However no appreciable difference in strength values could be observed when moisture increased above 37%. The strength-moisture relationship is a straight line, passing approximately through the fibre saturation point. By using the exponential formula, the breaking strength corresponding to any moisture level between zero and fibre saturation can be determined.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

Studies on arsenical creosote as a wood preservative for marine structures. Part 1. Incorporation of arsenic in creosote at various temperatures

A detailed study of the fortification of normal creosote and low temperature creosote with As sub(2) O sub(3) at 40°C, 50°C, 60°C, 70°C, 80°C and 90°C was carried out. When compared to normal creosote, low temperature creosote has been found to combine more easily with As sub(2) O sub(3) when temperature was . raised from 40 to 90°C. The incorporated arsenic values obtained shows that low temperature creosote with high phenolic content, retains considerably more As sub(2) O sub(3) and a maximum of 0.2180% w/w can be incorporated in low temperature creosote at 90°C.

Studies on arsenical creosote as a wood preservative for marine structures. Part 2. Observation on leaching, corrosion and resistance to borer attack

A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.

Utilization of treated wood, steel, fibreglass, ferrocement and aluminium in the construction of modern fishing boats and their comparative cost analysis

Modern fishing boats have to be built not only on perfect lines but also with sound and strong construction materials that will ensure a long lasting trouble free service commensurate with the heavy capital investment involved. Choice of construction materials for fishing boats need careful scrutiny as they have to perform too well under most aggressive environments-sea-water and marine atmosphere. A number of alternative boat-building materials are now available whose comparative merits and demerits as well as comparative costs are brought out in this paper.