Theoretical study of elastic electron scattering off stable and exotic nuclei

Results for elastic electron scattering by nuclei, calculated with charge densities of Skyrme forces and covariant effective Lagrangians that accurately describe nuclear ground states, are compared against experiment in stable isotopes. Dirac partial-wave calculations are performed with an adapted version of the ELSEPA package. Motivated by the fact that studies of electron scattering off exotic nuclei are intended in future facilities in the commissioned GSI and RIKEN upgrades, we survey the theoretical predictions from neutron-deficient to neutron-rich isotopes in the tin and calcium isotopic chains. The charge densities of a covariant interaction that describes the low-energy electromagnetic structure of the nucleon within the Lagrangian of the theory are used to this end. The study is restricted to medium- and heavy-mass nuclei because the charge densities are computed in mean-field approach. Because the experimental analysis of scattering data commonly involves parameterized charge densities, as a surrogate exercise for the yet unexplored exotic nuclei, we fit our calculated mean-field densities with Helm model distributions. This procedure turns out to be helpful to study the neutron-number variation of the scattering observables and allows us to identify correlations of potential interest among some of these observables within the isotopic chains.

Double folding with a density-dependent effective interaction and it s analytical approximation

The real part of the optical potential for heavy ion elastic scattering is obtained by double folding of the nuclear densities with a density-dependent nucleon-nucleon effective interaction which was successful in describing the binding, size, and nucleon separation energies in spherical nuclei. A simple analytical form is found to differ from the resulting potential considerably less than 1% all through the important region. This analytical potential is used so that only few points of the folding need to be computed. With an imaginary part of the Woods-Saxon type, this potential predicts the elastic scattering angular distribution in very good agreement with experimental data, and little renormalization (unity in most cases) is needed.

Comment on "Influence of bulk properties on the surface structure of finite nuclei"

We comment on a recent paper by Uma Maheswari et al. in which it is claimed that quantal calculations of the half-infinite nuclear matter, in contrast to semiclassical approximations, exhibit an unusually strong dependence of the 90%10% surface thickness of the density profile on the Fermi momentum kF at saturation. This conclusion was carried over to the surface incompressibility. On the contrary we find essential agreement between semiclassical and quantal results and very weak dependence on kF of the quantities in question.

Microscopic description of the twist mode in normal and superfluid trapped Fermi gases

We investigate the "twist" mode (rotation of the upper against the lower hemisphere) of a dilute atomic Fermi gas in a spherical trap. The normal and superfluid phases are considered. The linear response to this external perturbation is calculated within the microscopic Hartree-Fock-Bogoliubov approach. In the normal phase the excitation spectrum is concentrated in a rather narrow peak very close to the trapping frequency. In the superfluid phase the strength starts to be damped and fragmented and the collectivity of the mode is progressively lost when the temperature decreases. In the weak-pairing regime some reminiscence of the collective motion still exists, whereas in the strong-pairing regime the twist mode is completely washed out. The disappearance of the twist mode in the strong-pairing regime with decreasing temperature is interpreted in the framework of the two-fluid model.

Relativistic mean-field interaction with density-dependent meson-nucleon vertices based on microscopical calculations

Although ab initio calculations of relativistic Brueckner theory lead to large scalar isovector fields in nuclear matter, at present, successful versions of covariant density functional theory neglect the interactions in this channel. A new high-precision density functional DD-MEδ is presented which includes four mesons, σ, ω, δ, and ρ, with density-dependent meson-nucleon couplings. It is based to a large extent on microscopic ab initiocalculations in nuclear matter. Only four of its parameters are determined by adjusting to binding energies and charge radii of finite nuclei. The other parameters, in particular the density dependence of the meson-nucleon vertices, are adjusted to nonrelativistic and relativistic Brueckner calculations of symmetric and asymmetric nuclear matter. The isovector effective mass mp*−mn* derived from relativistic Brueckner theory is used to determine the coupling strength of the δ meson and its density dependence.

Origin of the neutron skin thickness of 208Pb in nuclear mean-field models

We study whether the neutron skin thickness Δrnp of 208Pb originates from the bulk or from the surface of the nucleon density distributions, according to the mean-field models of nuclear structure, and find that it depends on the stiffness of the nuclear symmetry energy. The bulk contribution to Δrnp arises from an extended sharp radius of neutrons, whereas the surface contribution arises from different widths of the neutron and proton surfaces. Nuclear models where the symmetry energy is stiff, as typical of relativistic models, predict a bulk contribution in Δrnp of 208Pb about twice as large as the surface contribution. In contrast, models with a soft symmetry energy like common nonrelativistic models predict that Δrnp of 208Pb is divided similarly into bulk and surface parts. Indeed, if the symmetry energy is supersoft, the surface contribution becomes dominant. We note that the linear correlation of Δrnp of 208Pb with the density derivative of the nuclear symmetry energy arises from the bulk part of Δrnp. We also note that most models predict a mixed-type (between halo and skin) neutron distribution for 208Pb. Although the halo-type limit is actually found in the models with a supersoft symmetry energy, the skin-type limit is not supported by any mean-field model. Finally, we compute parity-violating electron scattering in the conditions of the 208Pb parity radius experiment (PREX) and obtain a pocket formula for the parity-violating asymmetry in terms of the parameters that characterize the shape of the 208Pb nucleon densities.

The influence of the symmetry energy on the giant monopole resonance of neutron-rich nuclei analyzed in Thomas-Fermi theory

We analyze the influence of the density dependence of the symmetry energy on the average excitation energy of the isoscalar giant monopole resonance (GMR) in stable and exotic neutron-rich nuclei by applying the relativistic extended Thomas-Fermi method in scaling and constrained calculations. For the effective nuclear interaction, we employ the relativistic mean field model supplemented by an isoscalar-isovector meson coupling that allows one to modify the density dependence of the symmetry energy without compromising the success of the model for binding energies and charge radii. The semiclassical estimates of the average energy of the GMR are known to be in good agreement with the results obtained in full RPA calculations. The present analysis is performed along the Pb and Zr isotopic chains. In the scaling calculations, the excitation energy is larger when the symmetry energy is softer. The same happens in the constrained calculations for nuclei with small and moderate neutron excess. However, for nuclei of large isospin the constrained excitation energy becomes smaller in models having a soft symmetry energy. This effect is mainly due to the presence of loosely-bound outer neutrons in these isotopes. A sharp increase of the estimated width of the resonance is found in largely neutron-rich isotopes, even for heavy nuclei, which is enhanced when the symmetry energy of the model is soft. The results indicate that at large neutron numbers the structure of the low-energy region of the GMR strength distribution changes considerably with the density dependence of the nuclear symmetry energy, which may be worthy of further characterization in RPA calculations of the response function.

Scaling calculation of isoscalar giant resonances in relativistic Thomas-Fermi theory

We derive analytical expressions for the excitation energy of the isoscalar giant monopole and quadrupole resonances in finite nuclei, by using the scaling method and the extended ThomasFermi approach to relativistic mean-field theory. We study the ability of several nonlinear σω parameter sets of common use in reproducing the experimental data. For monopole oscillations the calculations agree better with experiment when the nuclear matter incompressibility of the relativistic interaction lies in the range 220260 MeV. The breathing-mode energies of the scaling method compare satisfactorily with those obtained in relativistic RPA and time-dependent mean-field calculations. For quadrupole oscillations, all the analyzed nonlinear parameter sets reproduce the empirical trends reasonably well.

Scaling in relativistic Thomas-Fermi approach for nuclei

By using the scaling method we derive the virial theorem for the relativistic mean field model of nuclei treated in the ThomasFermi approach. The ThomasFermi solutions statisfy the stability condition against scaling. We apply the formalism to study the excitation energy of the breathing mode in finite nuclei with several relativistic parameter sets of common use.

Contribuição das fontes de sedimentos em uma bacia hidrográfica agrícola sob plantio direto

O conhecimento das principais fontes difusas de produção de sedimento pode aumentar a eficiência de utilização dos recursos públicos, investidos em estratégias de gestão em bacias hidrográficas, que visem mitigar a transferência de sedimentos aos cursos d'água. Objetivou-se com este trabalho avaliar as fontes de sedimentos numa bacia hidrográfica rural de cabeceira com predomínio de cultivos anuais sob plantio direto e com intensa e inadequada exploração dos recursos naturais, por meio da quantificação da contribuição relativa das estradas e das lavouras na produção global de sedimentos. A bacia hidrográfica está localizada no município de Júlio de Castilhos, Rio Grande do Sul. O período de estudo foi de maio de 2009 a abril de 2011. Para a identificação das fontes, foi utilizado o método fingerprinting, que compara os solos de diferentes fontes e os sedimentos que são encontrados em suspensão no canal de drenagem, usando elementos traçadores. O manejo inadequado do solo nas áreas de lavoura, a falta de planejamento das vias de acesso e a ausência de práticas de controle do escoamento superficial, que sejam compatíveis com a fragilidade condicionada pelos solos e pelo relevo da bacia hidrográfica, têm provocado o surgimento de processos erosivos acelerados com efeitos negativos ao agricultor e à sociedade. As estradas apresentam alta porcentagem de contribuição na transferência de sedimentos, mas a contribuição das áreas de lavoura aumenta em precipitações pluviais de alta magnitude. Isso evidencia que a magnitude dos eventos de chuva influencia a proporção de contribuição entre as fontes ao longo do ano na bacia hidrográfica, interferindo no processo de mobilização de sedimentos e nutrientes em direção à rede de drenagem.

ESTIMATIVA DA EROSIVIDADE DE CHUVAS NO ESTADO DO PARANÁ PELO MÉTODO DA PLUVIOMETRIA: ATUALIZAÇÃO COM DADOS DE 1986 A 2008

Três estimativas de erosividade de chuvas no Estado do Paraná foram feitas nas décadas de 1980-90, mas nenhuma outra depois. Os objetivos deste trabalho foram atualizar, numa quarta estimativa, as informações de erosividade anual das chuvas para o Paraná, com dados pluviométricos de 1986 a 2008; e gerar informações de erosividade mensal para identificar a distribuição temporal da erosividade. Foram utilizados os métodos pluviográfico e pluviométrico de determinação de erosividade. O primeiro serviu para revalidar equações prévias de correlação entre erosividade por pluviografia e por pluviometria, isso feito em três localidades; já o segundo, para calcular o coeficiente de chuva em 114 localidades, utilizando-se dados de precipitação média mensal e anual, e então a erosividade, com as equações de correlação revalidadas. Mapas de erosividade anual e mensal foram gerados por interpolações geoestatísticas. A erosividade variou entre 5.449 e 12.581 MJ mm ha-1 h-1 ano-1 e aumentou no sentido oeste, a partir da região metropolitana de Curitiba; e no sentido sul, a partir do noroeste paranaense. Isso resultou em maiores erosividades nas regiões centro-sul (Guarapuava), centro-ocidental (Campo Mourão), oeste (Cascavel) e, principalmente, sudoeste (Pato Branco). Também houve incremento de erosividade a partir da região metropolitana de Curitiba, no sentido leste, indicando o litoral como outra região crítica em termos de erosividade. A maior erosividade mensal ocorreu em janeiro (média estadual de 1394 MJ mm ha-1 h-1 mês-1), seguida por tendência de diminuição até agosto (331 MJ mm ha-1 h-1 mês-1), quando então tornou a aumentar. Porém, ocorrem dois importantes repiques de erosividade: um em maio e outro em outubro (843 e 1.173 MJ mm ha-1 h-1 mês-1, respectivamente), principalmente nas regiões sudoeste e oeste. Esses repiques coincidem com períodos de implantação de culturas de inverno ou de verão nessas regiões. Em relação à última estimativa de erosividade anual, feita em 1993, houve aumento da área delimitada pela linha isoerodente de 11.000 MJ mm ha-1 h-1 ano-1 nas regiões sudoeste e oeste e um deslocamento das linhas isoerodentes de 7.000 e 8.000 MJ mm ha-1 h-1 ano-1 para o sentido leste nas regiões norte pioneiro, centro-oriental e sudeste, sugerindo elevação da erosividade nessas regiões. Tais alterações de erosividade podem estar associadas às eventuais mudanças no clima da região, mas também ao simples fato de este estudo estar considerando maior quantidade de dados em relação aos estudos anteriores. Concluiu-se que as equações de correlação determinadas entre os métodos pluviográfico e pluviométrico, obtidas para o Paraná em trabalhos anteriores, continuam válidas; os meses críticos quanto à erosividade são janeiro, maio e outubro; e as menores erosividades ocorrem nas regiões noroeste e metropolitana do Estado.

RPS4Y gene family evolution in primates

Background: The RPS4 gene codifies for ribosomal protein S4, a very well-conserved protein present in all kingdoms. In primates, RPS4 is codified by two functional genes located on both sex chromosomes: the RPS4X and RPS4Y genes. In humans, RPS4Y is duplicated and the Y chromosome therefore carries a third functional paralog: RPS4Y2, which presents a testis-specific expression pattern. Results: DNA sequence analysis of the intronic and cDNA regions of RPS4Y genes from species covering the entire primate phylogeny showed that the duplication event leading to the second Y-linked copy occurred after the divergence of New World monkeys, about 35 million years ago. Maximum likelihood analyses of the synonymous and non-synonymous substitutions revealed that positive selection was acting on RPS4Y2 gene in the human lineage, which represents the first evidence of positive selection on a ribosomal protein gene. Putative positive amino acid replacements affected the three domains of the protein: one of these changes is located in the KOW protein domain and affects the unique invariable position of this motif, and might thus have a dramatic effect on the protein function.Conclusion: Here, we shed new light on the evolutionary history of RPS4Y gene family, especially on that of RPS4Y2. The results point that the RPS4Y1 gene might be maintained to compensate gene dosage between sexes, while RPS4Y2 might have acquired a new function, at least in the lineage leading to humans.

Formación de jóvenes para el trabajo: escolaridad, capacitación y trabajo infantil

El estudio al cual se refiere este artículo es parte de um projecto amplio de investigación realizado con en el proposito de analizar la formación de los jóvenes para el trabajo en una ciudad mexicana, que se orientó a conocer las múltiples maneras como esta se resuelve. En ese sentido fueron abordadas las politicas públicas y privadas que impulsan la formación para el trabajo juvenil, las instituciones y sistemas de educación que intervienen y los actores envolucrados. El ojetivo de este artículo es describir y analizar especificamente las tres vias de formación en la industria del calzado: la escolaridad, la capacitación intencional impartida en el interior de la empresa y los conocimientos y competencias adquiridos por los trabajadores a través de sus experiencias más o menos intencionales, en los diversos centros de trabajo. Se proponen finalmente algunos puntos básicos de debate al respecto.