Three-Dimensional Modelling of Honeybee Venom Allergenic Proteases: Relation to Allergenicity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of recycled tiles and OSB ceiling materials in closed broiler house prototypes

This study aimed at evaluating the thermal performance of a modular ceiling system for poultry houses. The reduced- and distorted-scale prototypes used ceiling modules made of reforested wood and were covered with recycled long-life package tiles. The following parameters were measured for 21 days: tile internal surface temperature (ST), globe temperature and humidity index (WBGT), and radiant heat load (RHL). Measurements were made at times of highest heat load (11:00 am, 13:00 pm, and 03:00 pm). Collected data were analyzed by R statistics software. Means were compared by multiple comparison test (Tukey) and linear regression was performed, both at 5% significance level. The results showed that the prototype with the ceiling was more efficient to reduce internal tile surface temperature; however, this was not sufficient to provide a comfortable environment for broilers during the growout. Therefore, other techniques to provide proper cooling are required in addition to the ceiling.

Avaliação econômica de sistemas agroflorestais implantados para recuperação de reserva legal no Pontal do Paranapanema, São Paulo

O Pontal do Paranapanema, extremo oeste do Estado de São Paulo, é conhecido em todo o Brasil devido aos conflitos pela posse da terra, protagonizados pelo Movimento dos Trabalhadores Rurais Sem Terra (MST), que transformou significativamente a paisagem da região, onde atualmente se observam pequenas ilhas de assentamentos rurais imersos numa matriz de grandes pastagens. O Código Florestal prevê que esses assentamentos, assim como qualquer propriedade rural, deve manter 20% de sua área com cobertura vegetal arbórea. Essa área, conhecida como Reserva Florestal Legal, deve ser restaurada, caso não exista. Assim, esta pesquisa se desenvolveu no assentamento Santa Zélia, Município de Teodoro Sampaio, São Paulo, numa área de 15 ha de Reserva Legal. Seis famílias desse assentamento foram responsáveis pela restauração da área, através de módulos agroflorestais (Taungya) temporários. Dois indicadores foram utilizados para avaliação econômica da produção agrícola na área: Valor Presente Líquido (VLP) e Relação Benefício-Custo (RB/C). Os resultados indicaram valores positivos em todas as famílias analisadas, levando à conclusão de que sistemas agroflorestais podem ser adotados na recuperação de áreas de reserva legal em propriedades rurais. Sua maior ou menor viabilidade econômica irá depender de um manejo mais intenso na área para produção agrícola e de preços satisfatórios para venda no mercado.

Propriedades químicas de solo sob reflorestamento ciliar após 20 anos de plantio em área de cerrado

As propriedades químicas do solo variam com a cultura e manejo utilizados. O trabalho teve como objetivos avaliar as propriedades químicas de solo sob reflorestamento ciliar após 20 anos de plantio em área de Cerrado localizada na Fazenda de Ensino, Pesquisa e Extensão, FEPE/UNESP, da Faculdade de Engenharia de Ilha Solteira. Foi realizada a análise química do solo (P, matéria orgânica (MO), pH, K, Ca, Mg, H+Al, Al e S) em 33 módulos, com três repetições em duas profundidades (0,0 - 0,20 e 0,20 - 0,40 m), com delineamento em blocos casualizados em esquema hierárquico. Os resultados indicaram que as propriedades químicas do solo sob o reflorestamento ciliar são semelhantes às propriedades do solo sem perturbação antrópica dessa região. As espécies plantadas no reflorestamento ciliar estão contribuindo com a deposição de material orgânico suficiente para que haja reciclagem de nutrientes, mantendo as propriedades químicas do solo em boas condições para que ocorra o estabelecimento da mata ciliar.

Avaliação da qualidade de vida de mulheres com HIV/AIDS através do HAT-QoL

Com objetivo de avaliar qualidade de vida entre mulheres portadoras de HIV/AIDS, aplicou-se o HIV/AIDS ­ Quality of Life test (HAT-QoL), instrumento específico para indivíduos infectados pelo HIV. Compõe-se de 42 questões e divide-se em nove domínios com questões sobre diversos aspectos de vida dos portadores. A escala foi submetida à tradução reversa e pré-teste. Sua forma definitiva foi aplicada entre 73 mulheres com HIV/AIDS. Os resultados, após análise estatística, indicaram que os domínios mais comprometidos foram: Preocupações financeiras, Preocupação com sigilo sobre a infecção, Atividades sexuais e Preocupações com a saúde. Esses resultados foram atribuídos ao fato das mulheres apresentarem, além da infecção, uma situação sócio-econômica precária que, provavelmente, também interferiu negativamente em sua qualidade de vida. Concluímos que a escala HAT-QoL foi adequada para a população de mulheres portadoras de HIV deste estudo, apesar de ser originária de uma cultura diferente da brasileira, já que sua aplicação produziu resultados semelhantes aos da literatura internacional.

Tempo de implantação de sistemas ERP: análise da influência de fatores e aplicação de técnicas de gerenciamento de projetos

Freqüentemente, a implantação de sistemas ERP é complexa e demorada, requerendo, em alguns casos, três ou quatro anos. em geral, um sistema ERP divide-se em módulos cujas implantações são feitas em vários estágios. Um problema sério é que os prazos para a implantação desses módulos são críticos e raramente são cumpridos. Esses atrasos geram insatisfação dos clientes, pois resultam em custos adicionais não previstos. A implantação de sistemas ERP depende de vários fatores, alguns dos quais têm muita influência nos prazos de implantação. Considera-se neste trabalho a técnica de planejamento de experimentos para a determinação dos principais fatores. Além disso, são usados métodos de caminhos críticos para a identificação das atividades que requerem mais investimentos para que haja redução no tempo total de implantação do projeto.

Software to productive and reproductive control of goats: PROCAPRI

PROCAPRI is a software to productive and reproductive control of goats developed with the aim of assisting the goat producers in their decisions, to make a representative data set of Brazilian goats production and providing research information. It has five modules: Administration, Association, UNESP, Maintenance, and Utilities. It has been available since October 1994, and it has been amply used, with 157 copies distributed until April 1998 in Brazil and other countries.

Simulation and analysis of a collisionless optical interconnection network

This article describes the simulation and analysis of collisionless optical interconnection network, which the objective is to achieve a high performance level based on a single protocol control. The optical coupler has one shared control channel and N communication channels. Each network node two communication modules one for packet transmission/reception and another for control channel access. We show by simulation that system achieves a high performance and ensures high scalability.

Parmodel: a web server for automated comparative modeling of proteins

Parmodel is a web server for automated comparative modeling and evaluation of protein structures. The aim of this tool is to help inexperienced users to perform modeling, assessment, visualization, and optimization of protein models as well as crystallographers to evaluate structures solved experimentally. It is subdivided in four modules: Parmodel Modeling, Parmodel Assessment, Parmodel Visualization, and Parmodel Optimization. The main module is the Parmodel Modeling that allows the building of several models ford a same protein in a reduced time, through the distribution of modeling processes on a Beowulf cluster. Parmodel automates and integrates the main softwares used in comparative modeling as MODELLER, Whatcheck, Procheck, Raster3D, Molscript, and Gromacs. This web server is freely accessible at http://www.biocristalografia.df.ibilce.unesp.br/tools/parmodel. (C) 2004 Elsevier B.V. All rights reserved.

Synthesis Pengo System plates for the treatment of long-bone diaphyseal fractures in dogs

A Brazilian orthopaedic company designed a stainless steel plate called Synthesis Pengo System (S.P.S.), which has one fixed and one changeable extremity. According to the assembly of the changeable extremity, it is possible to obtain dynamization or neutralization of the fracture site. Since the S.P.S. plate was developed for use in human patients, the aim of this study was to evaluate this system in long-bone diaphyseal fractures in dogs. Eight dogs with closed diaphyseal fractures of the femur (n = 1), radius and ulna (n = 5), and tibia (n = 2) were used. Patients were aged seven months to three years and weighed 18 to 31.2 kg. The S.P.S. plate was assembled with one fixed extremity and one changeable extremity in dynamization mode. The trail bar was positioned for synthesis modules with holes for cortical screws. The modules were positioned close to one another in two fractures and for away from the fracture site in the others. The bone healing occurred by external callus. Since motion at the fracture site determines the amount of callus required, the secondary bone healing that was observed in all of the cases indicated less rigid fixation of this system. A potential benefit of this system was a lesser interface contact with the bone since it was only done by trail bar. The major disadvantage was the prominence of the implant. It was possible to conclude that the S.P.S. plate appears to be a suitable method for the treatment of diaphyseal fractures in dogs.

Biodiversity, Species Interactions and Ecological Networks in a Fragmented World

Biodiversity is organised into complex ecological networks of interacting species in local ecosystems, but our knowledge about the effects of habitat fragmentation on such systems remains limited. We consider the effects of this key driver of both local and global change on both mutualistic and antagonistic systems at different levels of biological organisation and spatiotemporal scales.There is a complex interplay of patterns and processes related to the variation and influence of spatial, temporal and biotic drivers in ecological networks. Species traits (e.g. body size, dispersal ability) play an important role in determining how networks respond to fragment size and isolation, edge shape and permeability, and the quality of the surrounding landscape matrix. Furthermore, the perception of spatial scale (e.g. environmental grain) and temporal effects (time lags, extinction debts) can differ markedly among species, network modules and trophic levels, highlighting the need to develop a more integrated perspective that considers not just nodes, but the structural role and strength of species interactions (e.g. as hubs, spatial couplers and determinants of connectance, nestedness and modularity) in response to habitat fragmentation.Many challenges remain for improving our understanding: the likely importance of specialisation, functional redundancy and trait matching has been largely overlooked. The potentially critical effects of apex consumers, abundant species and supergeneralists on network changes and evolutionary dynamics also need to be addressed in future research. Ultimately, spatial and ecological networks need to be combined to explore the effects of dispersal, colonisation, extinction and habitat fragmentation on network structure and coevolutionary dynamics. Finally, we need to embed network approaches more explicitly within applied ecology in general, because they offer great potential for improving on the current species-based or habitat-centric approaches to our management and conservation of biodiversity in the face of environmental change.

Teaching in the community: Changing and implementing a new curriculum

The Faculdade de Medicina de Botucatu is changing to, and implementing a new curriculum aimed at integrating teaching and learning in the community. Emphasis is on preparing the community settings for teaching, learning and providing health care. A particular task is staff development with emphasis on problem-based learning (PBL) and training medical and nursing students in the leadership to participate in this process. The new curriculum includes the gradual introduction of clinical practice during First Year, integration of the basic sciences with clinical sciences, through integrated modules studied in small groups, and maintenance of the two year clerkship. The undergraduates are introduced gradually to the community: 8% of the total curriculum during First Year, 10% during Second Year, 10% during Third Year, 20% during Fourth Year, 30% during Fifth and Sixth Years. The basic health units at primary care level, and the regional specialty outpatients and hospitals at the second level, are the main teaching sites. An Education Development Committee was established to discuss the strategies for supporting the changes and to structure the planning for promoting the gradual transformation of staff development. After 18 months of implementation of the curriculum, there followed discussions and monitoring of the objectives of changes in medical education at our school. Successful implementation of the new curriculum would fail, if the objectives were not absorbed by every member of the implementation Committee.

A surface modification for hydrogen storage intermetallic particles by sol-gel method

A new process for the surface modification of hydrogen storage intermetallic particles used as anode material in secondary batteries is proposed in this article. The copper oxide particles coverage obtained by the sol-gel method is proposed to produce, under operational conditions of a Ni-MH battery, a metallic framework that tolerates the volume changes in charge/discharge cycles and does not inhibit the hydrogen absorption. Furthermore it was noticed an enhancement on the discharge capacity of the electrode material that can be related to a new hydrogen storage phase or to an inhibition of the surface oxidation promoted by the film coverage.

Specific depth cone resistivity measurements to determine soil engineering properties

The University of British Columbia (UBC) began performing piezocone penetration tests (CPTU) with electrical resistivity measurements (RCPTU) in 1989. Since then, RCPTU research at UBC has focused on obtaining geo-environmental parameters such as fluid resistivity and soil engineering properties such as porosity and degree of saturation from measurements of bulk soil electrical resistivity using the empirical relationship proposed by Archie (1942). Within this framework, the paper illustrates and discusses important design and calibration issues for resistivity modules such as the use of isolated circuitry to achieve linear calibrations over large ranges of resistivity. The suitability of RCPTU measurements for determination of geo-environmental and geotechnical parameters are assessed using typical ranges of soil and groundwater properties and methods of isolating individual factors for study are discussed. Illustrative examples of RCPTU research efforts including the environmental characterization of mine tailings, delineation of saline water intrusions in fresh water aquifers and the quality control of geotechnical ground densification are presented throughout the text. It is shown that groundwater temperature and hence ion mobility is not significantly altered by frictional heat generated during piezocone penetration and that ratio-based approaches to monitoring soil porosity can be used to eliminate the requirement for extensive groundwater sampling programs. Lastly, it is shown that RCPTU measurements above the water table can only be made using resistivity modules that are stable over a large range of resistivities and that such measurements are the most difficult to interpret because of grain surface conduction effects and generally unknown fluid resistivities.