Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Implementation of a unified userspace time handling library under the Linux OS

An appropriate assessment of end-to-end network performance presumes highly efficient time tracking and measurement with precise time control of the stopping and resuming of program operation. In this paper, a novel approach to solving the problems of highly efficient and precise time measurements on PC-platforms and on ARM-architectures is proposed. A new unified High Performance Timer and a corresponding software library offer a unified interface to the known time counters and automatically identify the fastest and most reliable time source, available in the user space of a computing system. The research is focused on developing an approach of unified time acquisition from the PC hardware and accordingly substituting the common way of getting the time value through Linux system calls. The presented approach provides a much faster means of obtaining the time values with a nanosecond precision than by using conventional means. Moreover, it is capable of handling the sequential time value, precise sleep functions and process resuming. This ability means the reduction of wasting computer resources during the execution of a sleeping process from 100% (busy-wait) to 1-1.5%, whereas the benefits of very accurate process resuming times on long waits are maintained.

Internet au service du patrimoine. Cartographie dynamique de l'inventaire des géotopes d'importance nationale

L'inventaire des géotopes d'importance nationale, aujourd'hui proche de son état final, est le fruit d'un long travail de sélection, de documentation ainsi que de définition et de numérisation des périmètres des sites initié dans les années 1990 par le groupe de travail pour la protection des géotopes en Suisse (Strasser et al. 1995, Berger et al. 2008). Il représente un outil au service de la diffusion et à la promotion du géopatrimoine suisse, auprès de la population en général et des professionnels des géosciences en particulier, dans un but de valorisation patrimoniale et de protection et par une sensibilisation à la valeur particulière et à la vulnérabilité des géotopes.¦C'est dans cet objectif qu'a été développée une interface cartographique rendant accessible sur Internet le contenu de cet inventaire. L'outil de web mapping utilisé - GoogleMaps API - permet en effet d'enrichir une interface de navigation intuitive de diverses fonctions additionnelles offertes par la cartographie sur internet (Kraak 2004, Plewe 2007). La carte n'est donc pas seulement une représentation de la réalité permettant la localisation de différents objets, mais également un outil de recherche thématique et spatiale ainsi qu'un index reliant chaque objet cartographié à diverses informations.¦Porte d'accès aux données des site à une échelle individuelle ou globale, mais aussi outil d'exploration, cette interface propose plusieurs niveaux d'utilisation, correspondant aux diverses interactions possibles avec ces données : naviguer et découvrir les sites, réaliser des sélections multiples, comparer les géotopes à d'autres données, comme l'inventaire fédéral des paysages. L'utilisateur peut ainsi produire à chaque fois la carte qui répond à ses besoins et à ses questions. En donnant à tous accès au contexte et aux particularités de chaque site par delà la globalité abstraite de l'inventaire, cette application se veut avant tout un outil au service de la médiation du géopatrimoine.

Benchmarking therapeutic drug monitoring software: A review of available computer tools

Therapeutic drug monitoring (TDM) aims to optimize treatments by individualizing dosage regimens based on the measurement of blood concentrations. Dosage individualization to maintain concentrations within a target range requires pharmacokinetic and clinical capabilities. Bayesian calculations currently represent the gold standard TDM approach but require computation assistance. In recent decades computer programs have been developed to assist clinicians in this assignment. The aim of this survey was to assess and compare computer tools designed to support TDM clinical activities. The literature and the Internet were searched to identify software. All programs were tested on personal computers. Each program was scored against a standardized grid covering pharmacokinetic relevance, user friendliness, computing aspects, interfacing and storage. A weighting factor was applied to each criterion of the grid to account for its relative importance. To assess the robustness of the software, six representative clinical vignettes were processed through each of them. Altogether, 12 software tools were identified, tested and ranked, representing a comprehensive review of the available software. Numbers of drugs handled by the software vary widely (from two to 180), and eight programs offer users the possibility of adding new drug models based on population pharmacokinetic analyses. Bayesian computation to predict dosage adaptation from blood concentration (a posteriori adjustment) is performed by ten tools, while nine are also able to propose a priori dosage regimens, based only on individual patient covariates such as age, sex and bodyweight. Among those applying Bayesian calculation, MM-USC*PACK© uses the non-parametric approach. The top two programs emerging from this benchmark were MwPharm© and TCIWorks. Most other programs evaluated had good potential while being less sophisticated or less user friendly. Programs vary in complexity and might not fit all healthcare settings. Each software tool must therefore be regarded with respect to the individual needs of hospitals or clinicians. Programs should be easy and fast for routine activities, including for non-experienced users. Computer-assisted TDM is gaining growing interest and should further improve, especially in terms of information system interfacing, user friendliness, data storage capability and report generation.

EuroDia: a beta-cell gene expression resource.

Type 2 diabetes mellitus (T2DM) is a major disease affecting nearly 280 million people worldwide. Whilst the pathophysiological mechanisms leading to disease are poorly understood, dysfunction of the insulin-producing pancreatic beta-cells is key event for disease development. Monitoring the gene expression profiles of pancreatic beta-cells under several genetic or chemical perturbations has shed light on genes and pathways involved in T2DM. The EuroDia database has been established to build a unique collection of gene expression measurements performed on beta-cells of three organisms, namely human, mouse and rat. The Gene Expression Data Analysis Interface (GEDAI) has been developed to support this database. The quality of each dataset is assessed by a series of quality control procedures to detect putative hybridization outliers. The system integrates a web interface to several standard analysis functions from R/Bioconductor to identify differentially expressed genes and pathways. It also allows the combination of multiple experiments performed on different array platforms of the same technology. The design of this system enables each user to rapidly design a custom analysis pipeline and thus produce their own list of genes and pathways. Raw and normalized data can be downloaded for each experiment. The flexible engine of this database (GEDAI) is currently used to handle gene expression data from several laboratory-run projects dealing with different organisms and platforms. Database URL: http://eurodia.vital-it.ch.

Creació d'un media center amb software lliure

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. L’objectiu d’aquest treball de recerca és la creació d’un dispositiu encarregat de centralitzar totes les necessitats multimèdia de casa nostra i distribuir aquest contingut a tots els terminals de la xarxa local d’una manera senzilla i automatitzada. Aquest dispositiu s’ha dissenyat per estar connectat a una televisió d’alta definició, que permetrà la reproducció i l’organització de tot el nostre multimèdia d’una manera còmoda i fàcil. El media center s’encarrega de gestionar la nostra filmoteca, fototeca, biblioteca musical i sèries de TV de manera transparent i automàtica. A més a més, l’usuari pot accedir a tot el multimèdia emmagatzemat al media center des de qualsevol dispositiu de la xarxa local a través de protocols com CIFS o UPnP, en un intent de replicar el cloud computing a escala local. El dispositiu ha estat dissenyat per a suportar tot tipus de formats i subtítols, assegurant la compatibilitat total amb arxius lliures de DRM. El seu disseny minimalista i silenciós el fa perfecte per a substituir el reproductor de DVD de la sala. Tot això sense oblidar el seu baix consum, de l’ordre d’un 75% inferior al d’un PC convencional.

Protein interaction data curation: the International Molecular Exchange (IMEx) consortium.

The International Molecular Exchange (IMEx) consortium is an international collaboration between major public interaction data providers to share literature-curation efforts and make a nonredundant set of protein interactions available in a single search interface on a common website (http://www.imexconsortium.org/). Common curation rules have been developed, and a central registry is used to manage the selection of articles to enter into the dataset. We discuss the advantages of such a service to the user, our quality-control measures and our data-distribution practices.

Experimentació amb un receptor software GPS-Galileo d'alta sensibilitat per a entorns interiors

Este proyecto se centra en el análisis de señales GPS, utilizando un receptor software desarrollado con Matlab en un proyecto de investigación para la Agencia Espacial Europea (ESA), llevado a cabo por parte del departamento de Telecomunicaciones e Ingeniería de Sistemas de la ETSE. Este software utiliza técnicas de procesado de señal de alta sensibilidad (HS-GNSS) que permite al usuario determinar su posición en entornos de difícil propagación como puede ser el caso de los escenarios interiores. Los datos experimentales se analizan en función del nivel de multipath que afecta a la señal de cada uno de los satélites, y la degradación que los escenarios interiores provocan en las señales, a causa del mobiliario, paredes, personas, etc. Para analizar los datos experimentales, se ha utilizado una métrica presentada en el congreso internacional EuCAP 2009, con la que es posible caracterizar las señales en función del nivel de multipath.

Dynamic simulation of regulatory networks using SQUAD.

BACKGROUND: The ambition of most molecular biologists is the understanding of the intricate network of molecular interactions that control biological systems. As scientists uncover the components and the connectivity of these networks, it becomes possible to study their dynamical behavior as a whole and discover what is the specific role of each of their components. Since the behavior of a network is by no means intuitive, it becomes necessary to use computational models to understand its behavior and to be able to make predictions about it. Unfortunately, most current computational models describe small networks due to the scarcity of kinetic data available. To overcome this problem, we previously published a methodology to convert a signaling network into a dynamical system, even in the total absence of kinetic information. In this paper we present a software implementation of such methodology. RESULTS: We developed SQUAD, a software for the dynamic simulation of signaling networks using the standardized qualitative dynamical systems approach. SQUAD converts the network into a discrete dynamical system, and it uses a binary decision diagram algorithm to identify all the steady states of the system. Then, the software creates a continuous dynamical system and localizes its steady states which are located near the steady states of the discrete system. The software permits to make simulations on the continuous system, allowing for the modification of several parameters. Importantly, SQUAD includes a framework for perturbing networks in a manner similar to what is performed in experimental laboratory protocols, for example by activating receptors or knocking out molecular components. Using this software we have been able to successfully reproduce the behavior of the regulatory network implicated in T-helper cell differentiation. CONCLUSION: The simulation of regulatory networks aims at predicting the behavior of a whole system when subject to stimuli, such as drugs, or determine the role of specific components within the network. The predictions can then be used to interpret and/or drive laboratory experiments. SQUAD provides a user-friendly graphical interface, accessible to both computational and experimental biologists for the fast qualitative simulation of large regulatory networks for which kinetic data is not necessarily available.

Forensic examination of ink by high-performance thin layer chromatography - The United States Secret Service Digital Ink Library

Forensic examinations of ink have been performed since the beginning of the 20th century. Since the 1960s, the International Ink Library, maintained by the United States Secret Service, has supported those analyses. Until 2009, the search and identification of inks were essentially performed manually. This paper describes the results of a project designed to improve ink samples' analytical and search processes. The project focused on the development of improved standardization procedures to ensure the best possible reproducibility between analyses run on different HPTLC plates. The successful implementation of this new calibration method enabled the development of mathematical algorithms and of a software package to complement the existing ink library.

An efficient use of virtualization in grid/cloud environments

Grid is a hardware and software infrastructure that provides dependable, consistent, pervasive, and inexpensive access to high-end computational resources. Grid enables access to the resources but it does not guarantee any quality of service. Moreover, Grid does not provide performance isolation; job of one user can influence the performance of other user’s job. The other problem with Grid is that the users of Grid belong to scientific community and the jobs require specific and customized software environment. Providing the perfect environment to the user is very difficult in Grid for its dispersed and heterogeneous nature. Though, Cloud computing provide full customization and control, but there is no simple procedure available to submit user jobs as in Grid. The Grid computing can provide customized resources and performance to the user using virtualization. A virtual machine can join the Grid as an execution node. The virtual machine can also be submitted as a job with user jobs inside. Where the first method gives quality of service and performance isolation, the second method also provides customization and administration in addition. In this thesis, a solution is proposed to enable virtual machine reuse which will provide performance isolation with customization and administration. The same virtual machine can be used for several jobs. In the proposed solution customized virtual machines join the Grid pool on user request. Proposed solution describes two scenarios to achieve this goal. In first scenario, user submits their customized virtual machine as a job. The virtual machine joins the Grid pool when it is powered on. In the second scenario, user customized virtual machines are preconfigured in the execution system. These virtual machines join the Grid pool on user request. Condor and VMware server is used to deploy and test the scenarios. Condor supports virtual machine jobs. The scenario 1 is deployed using Condor VM universe. The second scenario uses VMware-VIX API for scripting powering on and powering off of the remote virtual machines. The experimental results shows that as scenario 2 does not need to transfer the virtual machine image, the virtual machine image becomes live on pool more faster. In scenario 1, the virtual machine runs as a condor job, so it easy to administrate the virtual machine. The only pitfall in scenario 1 is the network traffic.

ARCHITECTING USER-CENTRIC PRIVACY-AS-A-SET-OF-SERVICES: DIGITAL IDENTITY RELATED PRIVACY FRAMEWORK

AbstractDigitalization gives to the Internet the power by allowing several virtual representations of reality, including that of identity. We leave an increasingly digital footprint in cyberspace and this situation puts our identity at high risks. Privacy is a right and fundamental social value that could play a key role as a medium to secure digital identities. Identity functionality is increasingly delivered as sets of services, rather than monolithic applications. So, an identity layer in which identity and privacy management services are loosely coupled, publicly hosted and available to on-demand calls could be more realistic and an acceptable situation. Identity and privacy should be interoperable and distributed through the adoption of service-orientation and implementation based on open standards (technical interoperability). Ihe objective of this project is to provide a way to implement interoperable user-centric digital identity-related privacy to respond to the need of distributed nature of federated identity systems. It is recognized that technical initiatives, emerging standards and protocols are not enough to guarantee resolution for the concerns surrounding a multi-facets and complex issue of identity and privacy. For this reason they should be apprehended within a global perspective through an integrated and a multidisciplinary approach. The approach dictates that privacy law, policies, regulations and technologies are to be crafted together from the start, rather than attaching it to digital identity after the fact. Thus, we draw Digital Identity-Related Privacy (DigldeRP) requirements from global, domestic and business-specific privacy policies. The requirements take shape of business interoperability. We suggest a layered implementation framework (DigldeRP framework) in accordance to model-driven architecture (MDA) approach that would help organizations' security team to turn business interoperability into technical interoperability in the form of a set of services that could accommodate Service-Oriented Architecture (SOA): Privacy-as-a-set-of- services (PaaSS) system. DigldeRP Framework will serve as a basis for vital understanding between business management and technical managers on digital identity related privacy initiatives. The layered DigldeRP framework presents five practical layers as an ordered sequence as a basis of DigldeRP project roadmap, however, in practice, there is an iterative process to assure that each layer supports effectively and enforces requirements of the adjacent ones. Each layer is composed by a set of blocks, which determine a roadmap that security team could follow to successfully implement PaaSS. Several blocks' descriptions are based on OMG SoaML modeling language and BPMN processes description. We identified, designed and implemented seven services that form PaaSS and described their consumption. PaaSS Java QEE project), WSDL, and XSD codes are given and explained.

Lite4Life (Tier 2 adult weight management service)

This service Aims: To provide a multi-component weight management service that supports sustainable behaviour change and weight loss in adults 16 years and over with a BMI 28. To enable patients to develop the necessary personal attributes for their own long term weight management and to understand the impact of their weight on their health and co-morbidities. Objectives: To provide an evidence based, multi-component tier 2 weight management service that improves patients knowledge and skills for effective and sustainable weight loss helps patients identify their own facilitators for positive behaviour change and to address underlying barriers to long-term behaviour changeincreases patients self-efficacy and confidence in their ability to address their weight To be an integral part of the tiered approach to weight management services for the population of Stockton. To ensure equitable service provision across Stockton-on-Tees. To provide intensive group based service, one-to-one support and maintenance support. To support the service user to develop and review a personalised goal setting plan phase 2 and at discharge after phase 2. To ensure a smooth transition from the service (tier2) to tier 1 services to ensure continuity of care for service users.Recruit referrals using a variety of and appropriate methods. To establish a single point of contact for referrals into the service.Continually promote the service across a range of mediums and liaise and work in partnership with key interdependencies (refer to 2.4) To establish a robust database and data collection system in line with information governance. To ensure the access criteria, care pathway and referral process is clearly understood by all health care professionals and those who may refer into the service. To establish close links with, and signpost and/or enable service users to access suitable services where patient needs indicate this. This may include access to Tees Time to Talk (IAPT) for psychological therapies; Specialist Weight Management Service; physical activity programmes; Tier 1 services; and primary care. To provide the necessary venues, equipment and assets needed to deliver the programme, ensuring due regard is given to the quality and safety of all materials used. To collect and provide data in quarterly reports to the Commissioner to allow for continued monitoring and evaluation of the service in line with the Standard Evaluation Framework (available at www.noo.org.uk/core/SEF) and as specified by the Commissioner.

Weigh2go: A Peripatetic Level 1 Weight Management Service

The aim of this intervention is to increase the accessibility of appropriate evidence based support to people who are clinically obese to enable them to make lifestyle changes that will lead to weight loss. Objectives1. Identify patients whose lifestyle put them at risk of obesity and poor health outcomes and provide them with advice and support along with signposting to specific services and activities. 2. Identify patients who are overweight or obese and offer them a structured multi-component programme of support for them to loose weight. 3. Through the use of software collect data to monitor outcomes at individual and practice levels.

Implementing A vision for change: moving towards a modern, quality and responsive mental health service. Carlow / Kilkenny / South Tipperary.

The key element of the HSE South’s Programme is to enhance and develop community mental health services in Carlow, Kilkenny and South Tipperary, to enable the service user to remain in the community to the greatest extent possible. HSE South has prioritised the implementation of the change programme and has allocated more than €20m capital funding and over €1.75m revenue funding to support this comprehensive development programme. Speaking at the briefings Mr. Pat Healy, Regional Director of Operations, HSE South said, “When this plan is delivered, clients will have access to the highest standards of services in all three counties, which should significantly improve these clients’ treatment programmes and quality of life. The National Service Users Executive are supporting the change programme, which is of immense importance to HSE South. The programme heralds the enhancement and development of community mental health services, the closure of old long stay institutions, the separation of North and South Tipperary acute inpatient mental health services and development of appropriate acute inpatient services, for the extended catchment area, in line with the national strategy for mental health “A Vision for Change”. The programme also acts on recommendations of the Mental Health Commission.”This resource was contributed by The National Documentation Centre on Drug Use.