(Table 1) Chlorophyll a content and microalgae abundance and biovolume in pack ice in the Bellingshausen Sea

Pack ice in the Bellingshausen Sea contained moderate to high stocks of microalgal biomass (3-10 mg Chl a/m**2) spanning the range of general sea-ice microalgal microhabitats (e.g., bottom, interior and surface) during the International Polar Year (IPY) Sea Ice Mass Balance in the Antarctic (SIMBA) studies. Measurements of irradiance above and beneath the ice as well as optical properties of the microalgae therein demonstrated that absorption of photosynthetically active radiation (PAR) by particulates (microalgae and detritus) had a substantial influence on attenuation of PAR and irradiance transmission in areas with moderate snow covers (0.2-0.3 m) and more moderate effects in areas with low snow cover. Particulates contributed an estimated 25 to 90% of the attenuation coefficients for the first-year sea ice at wavelengths less than 500 nm. Strong ultraviolet radiation (UVR) absorption by particulates was prevalent in the ice habitats where solar radiation was highest - with absorption coefficients by ice algae often being as large as that of the sea ice. Strong UVR-absorption features were associated with an abundance of dinoflagellates and a general lack of diatoms - perhaps suggesting UVR may be influencing the structure of some parts of the sea-ice microbial communities in the pack ice during spring. We also evaluated the time-varying changes in the spectra of under-ice irradiances in the austral spring and showed dynamics associated with changes that could be attributed to coupled changes in the ice thickness (mass balance) and microalgal biomass. All results are indicative of radiation-induced changes in the absorption properties of the pack ice and highlight the non-linear, time-varying, biophysical interactions operating within the Antarctic pack ice ecosystem.

Files related to figures 1 to 13

Members of the marine dinoflagellate genus Alexandrium are known to exude allelochemicals, unrelated to well-known neurotoxins (PSP-toxins, spirolides), with negative effects on other phytoplankton and marine grazers. Physico/chemical characterization of extracellular lytic compounds of A. tamarense, quantified by Rhodomonas salina bioassay, showed that the lytic activity, and hence presumably the compounds were stable over wide ranges of temperatures and pH and were refractory to bacterial degradation. Two distinct lytic fractions were collected by reversed-phase solid-phase extraction. The more hydrophilic fraction accounted for about 2% of the whole lytic activity of the A. tamarense culture supernatant, while the less hydrophilic one accounted for about 98% of activity. Although temporal stability of the compounds is high, substantial losses were evident during purification. Lytic activity was best removed from aqueous phase with chloroform-methanol (3:1). A "pseudo-loss" of lytic activity in undisturbed and low-concentrated samples and high activity of an emulsion between aqueous and n-hexane phase after liquid-liquid partition are strong evidence for the presence of amphipathic compounds. Lytic activity in the early fraction of gel permeation chromatography and lack of activity after 5 kD ultrafiltration indicate that the lytic agents form large aggregates or macromolecular complexes.

Ta2O5/SiO2 insulating acoustic mirrors for AlN-based X-band BAW resonators

This work describes the performance of AlN-based bulk acoustic wave resonators built on top of insulating acoustic reflectors and operating at around 8 GHz. The acoustic reflectors are composed of alternate layers of amorphous Ta2O5and SiO2 deposited at room temperature by pulsed-DC reactive sputtering in Ar/O2 atmospheres. SiO2 layers have a porous structure that provides a low acoustic impedance of only 9.5 MRayl. Ta2O5 films exhibit an acoustic impedance of around 39.5 MRayl that was assessed by the picoseconds acoustic technique These values allow to design acoustic mirrors with transmission coefficients in the centre of the band lower than -40 dB (99.998 % of reflectance) with only seven layers. The resonators were fabricated by depositing a very thin AlN film onto an iridium bottom electrode 180 nm-thick and by using Ir or Mo layers as top electrode. Resonators with effective electromechanical coupling factors of 5.7% and quality factors at the antiresonant frequency around 600 are achieved.

Spatial and temporal precipitation patterns of the Ebro River Basin, Spain

The Ebro River Basin, with around 85 000 km2 and located in NE Spain, is characterized by the high spatial heterogeneity of its geology, topography, climatology and land use. Rainfall is one of the most important climatic variables studied owing to its non-homogenous behaviour in event and intensity, which creates drought, water runoff and soil erosion with negative environmental and social consequences. In this work we characterized the rainfall variability pattern in the Ebro River Basin using universal multifractal (UM) analysis, which estimates the concentration of the data around the precipitation average (C1, codimension average), the degree of multiscaling behaviour in time (? index) and the maximum probable singularity in the rainfall distribution ( s). A spatial and temporal analysis of the UM parameters is applied to study the possible changes. With this porpoise, 60 daily rainfall series were selected from 132 synthetic series generated by Luna and Balairón (AEMet). These daily rainfall series present a length of 60 years, from 1950 to 2009. Each one of them was subdivided (1950?1970 and 1980?2009) to analyse the difference between the two periods. The range of variation of precipitation amounts and the frequency of dry events between both periods are discussed, as well as the evolution of the UM parameters through the years.

A simple genetic algorithm for calibration of stochastic rock discontinuity networks

Este artículo propone un método para llevar a cabo la calibración de las familias de discontinuidades en macizos rocosos. We present a novel approach for calibration of stochastic discontinuity network parameters based on genetic algorithms (GAs). To validate the approach, examples of application of the method to cases with known parameters of the original Poisson discontinuity network are presented. Parameters of the model are encoded as chromosomes using a binary representation, and such chromosomes evolve as successive generations of a randomly generated initial population, subjected to GA operations of selection, crossover and mutation. Such back-calculated parameters are employed to make assessments about the inference capabilities of the model using different objective functions with different probabilities of crossover and mutation. Results show that the predictive capabilities of GAs significantly depend on the type of objective function considered; and they also show that the calibration capabilities of the genetic algorithm can be acceptable for practical engineering applications, since in most cases they can be expected to provide parameter estimates with relatively small errors for those parameters of the network (such as intensity and mean size of discontinuities) that have the strongest influence on many engineering applications.

Estimation of daily global solar radiation from measured temperatures at Cañada de Luque, Córdoba, Argentina

Solar radiation is the most important source of renewable energy in the planet; it's important to solar engineers, designers and architects, and it's also fundamental for efficiently determining irrigation water needs and potential yield of crops, among others. Complete and accurate solar radiation data at a specific region are indispensable. For locations where measured values are not available, several models have been developed to estimate solar radiation. The objective of this paper was to calibrate, validate and compare five representative models to predict global solar radiation, adjusting the empirical coefficients to increase the local applicability and to develop a linear model. All models were based on easily available meteorological variables, without sunshine hours as input, and were used to estimate the daily solar radiation at Cañada de Luque (Córdoba, Argentina). As validation, measured and estimated solar radiation data were analyzed using several statistic coefficients. The results showed that all the analyzed models were robust and accurate (R2 and RMSE values between 0.87 to 0.89 and 2.05 to 2.14, respectively), so global radiation can be estimated properly with easily available meteorological variables when only temperature data are available. Hargreaves-Samani, Allen and Bristow-Campbell models could be used with typical values to estimate solar radiation while Samani and Almorox models should be applied with calibrated coefficients. Although a new linear model presented the smallest R2 value (R2 = 0.87), it could be considered useful for its easy application. The daily global solar radiation values produced for these models can be used to estimate missing daily values, when only temperature data are available, and in hydrologic or agricultural applications.

Effect of reservoir tillage on rainwater harvesting and soil erosion control under a developed rainfall simulator.

Soil erosion is a serious environmental threat in the Mediterranean region due to torrential rainfalls, and it contributes to the degradation of agricultural land. Techniques such as rainwater harvesting may improve soil water storage and increase agricultural productivity, which could result in more effective land usage. Reservoir tillage is an effective system of harvesting rainwater, but it has not been scientifically evaluated like other tillage systems. Its suitability for the conditions in Spain has not been determined. To investigate and quantify water storage from reservoir tillage and how it could be adapted to improve infiltration of harvested rainwater, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to five rainfall intensities ranging from 36 to 112 mm h-1 for 3 to 101-year return period with uniformity coefficients between 83 and 94%. In order to assess the reservoir tillage method under surface slopes of 0, 5, and 10%, three soil scooping devices with identical volume were used to make depressions in the following forms: a) truncated square pyramid, b) triangular prism, and c) truncated cone. These depressions were compared to a control soil surface with no depression. For the loam soil used in this study, results show that reservoir tillage was able to reduce soil erosion and surface runoff and significantly increase infiltration. There was significant difference between the depressions and the control. Compared to the control, depression (a) reduced surface runoff by about 61% and the sediment yield concentration by about 79%.

Estudio teórico y simulación de un OTDR para sistemas de comunicaciones por fibra óptica

El reflectómetro óptico en el dominio del tiempo, conocido por sus siglas en inglés como OTDR, es un dispositivo muy utilizado en sistemas de comunicaciones por fibra óptica para conocer de una manera rápida y sencilla como varía la potencia óptica a lo largo de la fibra óptica, siendo otro de sus usos frecuentes la localización de fallos y roturas en un enlace. Este proyecto fin de carrera, consiste en la realización mediante Matlab de una interfaz gráfica que permite simular un OTDR para distintos tipos de fibras, conectores y empalmes visualizándose por pantalla la variación de la potencia óptica en función de la distancia, pudiendo ampliar cualquier tramo del enlace que se desee visualizar con mayor detalle. Los objetivos del proyecto podemos establecerlos en dos partes. Primero, realizar una interfaz que nos permita diseñar un enlace de fibra óptica de forma sencilla, permitiendo además medir desde la atenuación de la fibra a la de un empalme. En segundo lugar, emplear la interfaz desarrollada para comprobar conceptos teóricos, haciendo hincapié en los principales errores de un enlace de fibra óptica real. Para una mejor visualización y concepción de lo implementado, es necesario revisar los principios básicos de funcionamiento de la fibra óptica y las principales características de un enlace, así como, los distintos dispositivos que lo componen, para después explicar el funcionamiento del OTDR y sus usos; por ello, en los capítulos segundo y tercero, se explican estas nociones básicas, necesarias para un mejor entendimiento del proyecto. Para poder utilizar la interfaz gráfica de usuario, el capítulo cuarto muestra la descripción de las funciones con parámetros, así como el manual de usuario de la interfaz gráfica. En el capítulo quinto se hace una recopilación y estudios de resultados para distintas simulaciones comprobando desde casos sencillos a casos extremos en los que se debe prestar una especial atención a los elementos que componen el enlace, siendo finalmente, en el sexto capítulo donde se presentan distintas conclusiones así como posibles trabajos futuros, a partir de lo realizado. ABSTRACT. The optical time domain reflectometer, known as OTDR, is a widely used device in systems for fiber optic communications used to know quick and simply how the optical power its varying along the fiber, with particular emphasis to another of its frequent uses in troubleshooting on a link. This final project consists in carrying through a graphical interface in Matlab to simulate an OTDR for different types of fibers, connectors and splices, visualizing the variation of optical power as a function of the distance. It is possible to zoom in specific sections to view them with greater detail. The project objectives can be set in two parts: - Make an interface that allows us to design a fiber optic link easily and measuring from the fiber attenuation to a splice one. - Use the interface developed to test theoretical concepts, emphasizing the most important mistakes of a real optical fiber link. For better visualization and understanding of what it’s been implemented, it is necessary to review the basic operating principles of fiber optics and the main characteristics of a fiber link, and also the different types of devices that comprise it, and then explaining also how the OTDR works and its uses, therefore, in second and third chapters, explains these basics needed for a better understanding of the project. To use the GUI, the fourth chapter shows the description of the functions with parameters and the user manual of the GUI. The fifth chapter is a compilation and study of some simulation results for simple cases to check from simply to extreme cases putting special attention to the elements that make up the link. To sum up, in the sixth chapter will appear different conclusions and possible future works for improving the graphical interface or making a new one.

An algorithm for graphical computer results in shells

A Finite Element technique to interpolate general data (function values and its derivatives) has been developped. The technique can be considered as a generalized solution of the classical polynomial interpolation, because the condition for the interpolating function to be a polynomial is replaced by a minimizing condition of a given “smoothing” functional. In this way it is possible to find interpolating functions with a given level of continuity according to the class of finite elements used. Examples have been presented in order to assess the accuracy and efficiency of the procedure.

Derivación deductiva de programas funcionales con patrones

Una de las dificultades principales en el desarrollo de software es la ausencia de un marco conceptual adecuado para su estudio. Una propuesta la constituye el modelo transformativo, que entiende el desarrollo de software como un proceso iterativo de transformación de especificaciones: se parte de una especificación inicial que va transformándose sucesivamente hasta obtener una especificación final que se toma como programa. Este modelo básico puede llevarse a la práctica de varias maneras. En concreto, la aproximación deductiva toma una sentencia lógica como especificación inicial y su proceso transformador consiste en la demostración de la sentencia; como producto secundario de la demostración se deriva un programa que satisface la especificación inicial. La tesis desarrolla un método deductivo para la derivación de programas funcionales con patrones, escritos en un lenguaje similar a Hope. El método utiliza una lógica multigénero, cuya relación con el lenguaje de programación es estudiada. También se identifican los esquemas de demostración necesarios para la derivación de funciones con patrones, basados en la demostración independiente de varias subsentencias. Cada subsentencia proporciona una subespecificación de una ecuación del futuro programa a derivar. Nuestro método deductivo está inspirado en uno previo de Zohar Manna y Richard Waldinger, conocido como el cuadro deductivo, que deriva programas en un lenguaje similar a Lisp. El nuevo método es una modificación del cuadro de estos autores, que incorpora géneros y permite demostrar una especificación mediante varios cuadros. Cada cuadro demuestra una subespecificación y por tanto deriva una ecuación del programa. Se prevén mecanismos para que los programas derivados puedan contener definiciones locales con patrones y variables anónimas y sinónimas y para que las funciones auxiliares derivadas no usen variables de las funciones principales. La tesis se completa con varios ejemplos de aplicación, un mecanismo que independentiza el método del lenguaje de programación y un prototipo de entorno interactivo de derivación deductiva. Categorías y descriptores de materia CR D.l.l [Técnicas de programación]: Programación funcional; D.2.10 [Ingeniería de software]: Diseño - métodos; F.3.1 [Lógica y significado de los programas]: Especificación, verificación y razonamiento sobre programas - lógica de programas; F.3.3 [Lógica y significado de los programas]: Estudios de construcciones de programas - construcciones funcionales; esquemas de programa y de recursion; 1.2.2 [Inteligencia artificial]: Programación automática - síntesis de programas; 1.2.3 [Inteligencia artificial]: Deducción y demostración de teoremas]: extracción de respuesta/razón; inducción matemática. Términos generales Programación funcional, síntesis de programas, demostración de teoremas. Otras palabras claves y expresiones Funciones con patrones, cuadro deductivo, especificación parcial, inducción estructural, teorema de descomposición.---ABSTRACT---One of the main difficulties in software development is the lack of an adequate conceptual framework of study. The transformational model is one such proposal that conceives software development as an iterative process of specifications transformation: an initial specification is developed and successively transformed until a final specification is obtained and taken as a program. This basic model can be implemented in several ways. The deductive approach takes a logical sentence as the initial specification and its proof constitutes the transformational process; as a byproduct of the proof, a program which satisfies the initial specification is derived. In the thesis, a deductive method for the derivation of Hope-like functional programs with patterns is developed. The method uses a many-sorted logic, whose relation to the programming language is studied. Also the proof schemes necessary for the derivation of functional programs with patterns, based on the independent proof of several subsentences, are identified. Each subsentence provides a subspecification of one equation of the future program to be derived. Our deductive method is inspired on a previous one by Zohar Manna and Richard Waldinger, known as the deductive tableau, which derives Lisp-like programs. The new method incorporates sorts in the tableau and allows to prove a sentence with several tableaux. Each tableau proves a subspecification and therefore derives an equation of the program. Mechanisms are included to allow the derived programs to contain local definitions with patterns and anonymous and synonymous variables; also, the derived auxiliary functions cannot reference parameters of their main functions. The thesis is completed with several application examples, i mechanism to make the method independent from the programming language and an interactive environment prototype for deductive derivation. CR categories and subject descriptors D.l.l [Programming techniques]: Functional programming; D.2.10 [Software engineering]: Design - methodologies; F.3.1 [Logics and meanings of programa]: Specifying and verifying and reasoning about programs - logics of programs; F.3.3 [Logics and meanings of programs]: Studies of program constructs - functional constructs; program and recursion schemes; 1.2.2 [Artificial intelligence]: Automatic programming - program synthesis; 1.2.3 [Artificial intelligence]: Deduction and theorem proving - answer/reason extraction; mathematical induction. General tenas Functional programming, program synthesis, theorem proving. Additional key words and phrases Functions with patterns, deductive tableau, structural induction, partial specification, descomposition theorem.

Effect of reservoir tillage on rainwater havesting and soil erosion control under a developed rainfall simulator

Soil erosion is a serious environmental threat in the Mediterranean region due to torrential rainfalls, and it contributes to the degradation of agricultural land. Techniques such as rainwater harvesting may improve soil water storage and increase agricultural productivity, which could result in more effective land usage. Reservoir tillage is an effective system of harvesting rainwater, but it has not been scientifically evaluated like other tillage systems. Its suitability for the conditions in Spain has not been determined. To investigate and quantify water storage from reservoir tillage and how it could be adapted to improve infiltration of harvested rainwater, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to five rainfall intensities ranging from 36 to 112 mm h− 1 for 3 to 101-year return period with uniformity coefficients between 83 and 94%. In order to assess the reservoir tillage method under surface slopes of 0, 5, and 10%, three soil scooping devices with identical volume were used to make depressions in the following forms: a) truncated square pyramid, b) triangular prism, and c) truncated cone. These depressions were compared to a control soil surface with no depression. For the loam soil used in this study, results show that reservoir tillage was able to reduce soil erosion and surface runoff and significantly increase infiltration. There was significant difference between the depressions and the control. Compared to the control, depression (a) reduced surface runoff by about 61% and the sediment yield concentration by about 79%.

Is Microarray Analysis Really Useful and Sufficient to Diagnose Nut Allergy in the Mediterranean Area?

Background: Component-based diagnosis on multiplex platforms is widely used in food allergy but its clinical performance has not been evaluated in nut allergy. Objective: To assess the diagnostic performance of a commercial protein microarray in the determination of specific IgE (sIgE) in peanut, hazelnut, and walnut allergy. Methods: sIgE was measured in 36 peanut-allergic, 36 hazelnut-allergic, and 44 walnut-allergic patients by ISAC 112, and subsequently, sIgE against available components was determined by ImmunoCAP in patients with negative ISAC results. ImmunoCAP was also used to measure sIgE to Ara h 9, Cor a 8, and Jug r 3 in a subgroup of lipid transfer protein (LTP)-sensitized nut-allergic patients (positive skin prick test to LTP-enriched extract). sIgE levels by ImmunoCAP were compared with ISAC ranges. Results: Most peanut-, hazelnut-, and walnut-allergic patients were sensitized to the corresponding nut LTP (Ara h 9, 66.7%; Cor a 8, 80.5%; Jug r 3, 84% respectively). However, ISAC did not detect sIgE in 33.3% of peanut-allergic patients, 13.9% of hazelnut-allergic patients, or 13.6% of walnut-allergic patients. sIgE determination by ImmunoCAP detected sensitization to Ara h 9, Cor a 8, and Jug r 3 in, respectively, 61.5% of peanut-allergic patients, 60% of hazelnut-allergic patients, and 88.3% of walnut-allergic patients with negative ISAC results. In the subgroup of peach LTP?sensitized patients, Ara h 9 sIgE was detected in more cases by ImmunoCAP than by ISAC (94.4% vs 72.2%, P<.05). Similar rates of Cor a 8 and Jug r 3 sensitization were detected by both techniques. Conclusions: The diagnostic performance of ISAC was adequate for hazelnut and walnut allergy but not for peanut allergy. sIgE sensitivity against Ara h 9 in ISAC needs to be improved.

OTIMISMO, SUPORTE SOCIAL E VALORES DO TRABALHO COMO ANTECEDENTES DE BEM ESTAR SUBJETIVO DE TRABALHADORES

Este estudo teve por objetivo verificar a capacidade de otimismo, de suporte social e de valores do trabalho serem preditores de bem estar subjetivo, bem como analisar as relações de variáveis demográficas com essas variáveis de estudo, descrevê-las e examinar as relações entre elas. A amostra consistiu de 47 homens e de 101 mulheres com idade média de 41,00 anos (DP =10,72) que buscavam apoio em instituição para sua transição profissional. O instrumento de coleta de dados foi um questionário de autopreenchimento composto por cinco medidas que aferiram as variáveis incluídas no estudo: otimismo, percepção de suporte social, valores do trabalho, satisfação geral com a vida e afetos positivos e negativos, bem como variáveis demográficas: sexo, idade, estudo, trabalho, voluntariado, estado civil e permanência na instituição. Foram realizadas análises estatísticas descritivas, testadas diferenças entre médias, correlações, análise de variância e calculados modelos de regressão linear múltipla. As relações das variáveis de estudo com variáveis demográficas revelaram que as pessoas que não estudam percebem ter mais suporte prático e dão mais importância a motivações de autopromoção e de prestígio do que as que estudam. Os mais jovens com até 30 anos relataram que se percebem tendo mais apoio emocional e prático do que os mais velhos. Com o avanço da idade diminuem as percepções de suporte emocional e prático, contudo as pessoas com mais de 50 anos revelaram menos afetos negativos e maior satisfação com a vida do que os mais jovens. Casados revelaram dar menos importância do que separados, divorciados, viúvos, etc. à estabilidade no trabalho e segurança financeira; solteiros revelaram ter mais afetos negativos do que os casados. Homens relataram se sentir mais satisfeitos com a vida, ter mais afetos positivos e menos afetos negativos que mulheres. Quem realiza trabalho voluntário revelou ser mais otimista e ter menos afetos negativos do que aqueles que não realizam. Os dados revelaram que os pesquisados têm um bom nível de otimismo e uma percepção de suporte emocional maior do que a percepção de suporte prático; são motivados, principalmente por metas de realização no trabalho e de estabilidade e segurança financeira; sentem-se indiferentes quanto à satisfação com a vida; apresentam afetos positivos um pouco acima da indiferença; contudo sentem poucos afetos negativos. Disso decorre que um pouco mais de dois terços dos pesquisados apresentaram predominância de estados emocionais positivos sobre os negativos. O otimismo foi a variável que estabeleceu associações mais altas e em maior quantidade; correlacionou positivamente com valores de realização no trabalho, com valores de relações sociais, com valores do trabalho de prestígio, com satisfação com a vida e com afetos positivos; e correlacionou negativamente com afetos negativos. A percepção de suporte emocional correlacionou positivamente com valores de prestígio, afetos positivos e com satisfação com a vida; e correlacionou negativamente com afetos negativos. Percepção de suporte prático não apresentou correlações significativas com nenhuma variável de estudo. Afetos positivos correlacionaram-se positivamente com valores do trabalho de relações sociais e com valores do trabalho de prestígio. A partir da análise de três modelos preditivos encontrou-se que otimismo e suporte emocional repercutem positivamente sobre a satisfação com a vida e sobre afetos positivos. Otimismo repercute negativamente sobre afetos negativos. Valores do trabalho de prestígio repercutem positivamente sobre afetos positivos. Valores de estabilidade repercutem negativamente sobre satisfação com a vida e sobre afetos positivos; e positivamente sobre afetos negativos. Os resultados deste estudo mostraram que o estado otimista é um poderoso fator de impacto positivo sobre o estado de saúde denominado bem estar subjetivo.(AU)

OTIMISMO, SUPORTE SOCIAL E VALORES DO TRABALHO COMO ANTECEDENTES DE BEM ESTAR SUBJETIVO DE TRABALHADORES

Este estudo teve por objetivo verificar a capacidade de otimismo, de suporte social e de valores do trabalho serem preditores de bem estar subjetivo, bem como analisar as relações de variáveis demográficas com essas variáveis de estudo, descrevê-las e examinar as relações entre elas. A amostra consistiu de 47 homens e de 101 mulheres com idade média de 41,00 anos (DP =10,72) que buscavam apoio em instituição para sua transição profissional. O instrumento de coleta de dados foi um questionário de autopreenchimento composto por cinco medidas que aferiram as variáveis incluídas no estudo: otimismo, percepção de suporte social, valores do trabalho, satisfação geral com a vida e afetos positivos e negativos, bem como variáveis demográficas: sexo, idade, estudo, trabalho, voluntariado, estado civil e permanência na instituição. Foram realizadas análises estatísticas descritivas, testadas diferenças entre médias, correlações, análise de variância e calculados modelos de regressão linear múltipla. As relações das variáveis de estudo com variáveis demográficas revelaram que as pessoas que não estudam percebem ter mais suporte prático e dão mais importância a motivações de autopromoção e de prestígio do que as que estudam. Os mais jovens com até 30 anos relataram que se percebem tendo mais apoio emocional e prático do que os mais velhos. Com o avanço da idade diminuem as percepções de suporte emocional e prático, contudo as pessoas com mais de 50 anos revelaram menos afetos negativos e maior satisfação com a vida do que os mais jovens. Casados revelaram dar menos importância do que separados, divorciados, viúvos, etc. à estabilidade no trabalho e segurança financeira; solteiros revelaram ter mais afetos negativos do que os casados. Homens relataram se sentir mais satisfeitos com a vida, ter mais afetos positivos e menos afetos negativos que mulheres. Quem realiza trabalho voluntário revelou ser mais otimista e ter menos afetos negativos do que aqueles que não realizam. Os dados revelaram que os pesquisados têm um bom nível de otimismo e uma percepção de suporte emocional maior do que a percepção de suporte prático; são motivados, principalmente por metas de realização no trabalho e de estabilidade e segurança financeira; sentem-se indiferentes quanto à satisfação com a vida; apresentam afetos positivos um pouco acima da indiferença; contudo sentem poucos afetos negativos. Disso decorre que um pouco mais de dois terços dos pesquisados apresentaram predominância de estados emocionais positivos sobre os negativos. O otimismo foi a variável que estabeleceu associações mais altas e em maior quantidade; correlacionou positivamente com valores de realização no trabalho, com valores de relações sociais, com valores do trabalho de prestígio, com satisfação com a vida e com afetos positivos; e correlacionou negativamente com afetos negativos. A percepção de suporte emocional correlacionou positivamente com valores de prestígio, afetos positivos e com satisfação com a vida; e correlacionou negativamente com afetos negativos. Percepção de suporte prático não apresentou correlações significativas com nenhuma variável de estudo. Afetos positivos correlacionaram-se positivamente com valores do trabalho de relações sociais e com valores do trabalho de prestígio. A partir da análise de três modelos preditivos encontrou-se que otimismo e suporte emocional repercutem positivamente sobre a satisfação com a vida e sobre afetos positivos. Otimismo repercute negativamente sobre afetos negativos. Valores do trabalho de prestígio repercutem positivamente sobre afetos positivos. Valores de estabilidade repercutem negativamente sobre satisfação com a vida e sobre afetos positivos; e positivamente sobre afetos negativos. Os resultados deste estudo mostraram que o estado otimista é um poderoso fator de impacto positivo sobre o estado de saúde denominado bem estar subjetivo.(AU)

UMA ANÁLISE DA RELAÇÃO ENTRE VARIÁVEIS MACROECONÔMICAS E O COMPORTAMENTO DAS AÇÕES DE MAIOR LIQUIDEZ DO ÍNDICE IBOVESPA

As ações de maior liquidez do índice IBOVESPA, refletem o comportamento das ações de um modo geral, bem como a relação das variáveis macroeconômicas em seu comportamento e estão entre as mais negociadas no mercado de capitais brasileiro. Desta forma, pode-se entender que há reflexos de fatores que impactam as empresas de maior liquidez que definem o comportamento das variáveis macroeconômicas e que o inverso também é uma verdade, oscilações nos fatores macroeconômicos também afetam as ações de maior liquidez, como IPCA, PIB, SELIC e Taxa de Câmbio. O estudo propõe uma análise da relação existente entre variáveis macroeconômicas e o comportamento das ações de maior liquidez do índice IBOVESPA, corroborando com estudos que buscam entender a influência de fatores macroeconômicos sobre o preço de ações e contribuindo empiricamente com a formação de portfólios de investimento. O trabalho abrangeu o período de 2008 a 2014. Os resultados concluíram que a formação de carteiras, visando a proteção do capital investido, deve conter ativos com correlação negativa em relação às variáveis estudadas, o que torna possível a composição de uma carteira com risco reduzido.