Desenvolvimento e caracterização de sistemas líquido cristalinos para incorporação de p-metoxicinamato de octila

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Revestimento interno de tubulação por um processo de centrifugação utilizando resina éster-vinílica com adição de cargas

Being the corrosion one of the great problems facing the industry today, specifically the internal corrosion of pipes in chemical and petrochemical industries, hence this work proposes a new type of internal coating in order to avoid fouling and decrease the pressure loss in the flow. For this, we use a composition of vinyl ester resins and manometric loads, which after cleaning and preparation of the internal surface of the tube will be applied through a process of centrifugation, adjusted by a lathe. After curing the resin, a test of roughness will be realized in order to analyze the reduction of friction factor and thus be able to conclude whether there was a significant decrease in pressure drop. With test results in hand, we hope to obtain a coating that meets most of the properties required by the industry and to provide a reduction in operating costs and a visible improvement in the conditions of use of the pipe

Detecção da produção de Biofilme em Staphylococcus aureus e Estafilococos Coagulase-negativa isolados de recém-nascidos

Uma coleção de 50 amostras de Staphylococcus aureus e 50 de estafilococos coagulase-negativa (ECN) isoladas de recém-nascidos (RN) da unidade neonatal do Hospital das Clínicas da Faculdade de Medicina de Botucatu foram estudadas quanto à produção de biofilme. Para isto foi utilizada a técnica de PCR na detecção dos genes icaA, icaC e icaD e os métodos fenotípicos de aderência em placa de poliestireno, aderência em tubo de borossilicato e método do Agar Congo Vermelho (CRA). Dos 50 S. aureus estudados, 100% foram positivos para a produção de biofilme pela PCR, 98% pelo método do tubo, 100% pelo método da placa de poliestireno e 98% pelo CRA. Já das 50 amostras de ECN, 94% foram positivas pela PCR, 76% pelo método do tubo, 82% pelo teste da placa e 74% pelo CRA. Feita a comparação dos métodos utilizados, tendo por referência o padrão-ouro (PCR), foi possível observar que o método que melhor se correlacionou com o padrão-ouro, foi o método da aderência em placa de poliestireno, apresentando melhor sensibilidade e especificidade para ambas as espécies

Incorporação do trans-resveratrol em sistemas nanoestruturados: avaliação das ações antioxidante e despigmentante in vitro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento e caracterização de sistemas nanoestruturados para administração cutânea de metotrexato

A psoríase é uma doença inflamatória de pele e das articulações, e por acometer um órgão visível como a pele, resulta em transtornos psicológicos relacionados à auto-estima do paciente. Dentre os fármacos empregados no tratamento, destaca-se o metotrexato para uso sistêmico que, embora eficiente, possui a desvantagem de causar efeitos colaterais tóxicos como a hepatotoxicidade e a mielotoxicidade. Para minimizar tais efeitos e aumentar a eficácia do fármaco, o trabalho teve por objetivo desenvolver e caracterizar sistemas nanoestruturados para administração cutânea do metotrexato. Para realizar esse estudo, inicialmente foram preparadas diferentes formulações constituídas por silicone fluido de copolímero glicol (DC® 193), poliéter funcional siloxano (DC® 5329) e água destilada. O metotrexato foi incorporado numa concentração de 1,25% (p/v), com auxílio de solução de hidróxido de sódio 1M, sendo ajustado o pH final da formulação para 7,0 com ácido clorídrico 0,1M. Foram selecionadas algumas regiões do diagrama para serem submetidas a testes de estabilidade, empregando o teste de centrifugação, determinação do pH, condutividade iônica, índice de refração e avaliação das características organolépticas. Foi realizada a análise reológica empregando reômetro, modelo RS-1 (HaakeRheostress). As estruturas das formulações foram analisadas por microscopia de luz polarizada. As amostras com maior concentração de tensoativo apresentaram aspecto transparente, sendo submetidas à análise com microscópio de luz polarizada, onde evidenciou-se estruturas conhecidas como “cruzes de malta”, indicativas de fase lamelar. Foram selecionadas 3 formulações com concentração de 40% de tensoativo, variando-se as proporções de água e óleo, nas quais foram incorporadas o metotrexato... (Resumo completo, clicar acesso eletrônico abaixo)

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Cálculo estrutural de barreiras: Desenvolvimento de um programa computacional de interface online

This study aimed to develop a computer program which systematizes the structural shielding design calculation in diagnostic radiology facilities. For this purpose methodology of the National Council of Radiation Protection and Measurements (NCRP 147[5]) was used. By comparative statistics studies, it was verified if reference parameters values suggested by the US publication correspond to the average national values. The World Wide Web was chosen because of its characteristics as a powerful mean of communication, especially in terms of the wide variety of useful resources and easy access. To compare the reference values of some parameters proposed by NCRP 147 to Brazilian average, studies about the normalized workload per patient, performance of X-ray tube and primary air kerma, unshielded, at one meter from the focal point of the X-ray tube were made. Through this research, relative differences were found. In workload values this differences reached up to 50% in mammography compared to those presented by the NCRP 147; in X-ray tube performance the percentage differences reached 69% in dental radiology, and air kerma results amounted 31% in fluoroscopy. This demonstrates the importance of validation of international protocols to local realities

Avaliação gastroprotetora da epicatequina e verificação de seus mecanismos de ação

The stomach is an exceptional organ, which functions are sterilize food ingested, form the primitive bolus, digest lipids and proteins, and to store food temporarily in the gastrointestinal tract. Its capacity of digesting food without digesting itself is amazing. This fact occurs due to innumerous protective substances adjacent to the gastric mucosa. When aggressive factors overwhelm the protective factors, a lesion in the gastric mucosa is formed. Lesions that reach the lamina propria are called gastric ulcers, which are classified macroscopically as openings on the gastric wall and; microscopically, as a gastric injury characterized with epithelial desquamation, mucosal hemorrhage, glandular damage and eosinophilic infiltration. The current therapy available is effective, although it causes collateral effects, therefore researching new drugs is necessary. This work aim to evaluate the gastroprotective effect of epicatechin against gastric lesions induced by absolute ethanol and non steroidal anti-inflammatory drugs which are the main causes of this disease currently, yet we aim to study the main mechanisms of action responsible for the gastroprotective effect. The results show that epicatechin has a significant macroscopic and microscopic gastroprotective effect against gastric injuries induced by ethanol and indomethacin, acting locally by augmenting gastric mucus secretion and it also acts via antioxidant system by holding total glutathione levels. Epicatechin’s gastroprotective mechanisms depend on the activation of sulfhydryl compounds and doesn’t depend on the NO-synthase enzyme

Avaliação da expressão gênica em pacientes com Diabetes Mellitus tipo 2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem do resfriamento para a zona termicamente afetada pela soldagem de tubos de aço carbono

Because the high consumption of welded pipe for exploration and conduction oil and gas, optimization of manufacturing processes is necessary to obtain better productivity, efficiency and cost reduction. The objective of this study is to analyze the forms of heat transfer during the welding of pipes using longitudinal submerged arc process them to propose a model for the temperature distribution in the welded region. For this analysis are addressed as the heat transfer modes operate in the specified welding process and the necessary considerations for the mathematical model were obtained. The calculations were performed and the simulations needed to obtain the temperature distribution in the tube were carried out. Therefore, the practice was satisfactory and the results showed a range of temperatures along the pipe for a particular model and the future suggestions for improvement of this work

Anatomia comparada da casca de stryphnodendron polyphyllum mart. (fabaceae) em cerrado sensu stricto e mata de galeria

Pós-graduação em Ciência Florestal - FCA

Biofilme estafilocócico: prevenção, detecção da produção e determinação do perfil de resistência a antimicrobianos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tetraethylortossilicate plasma thin film with hydrophilic and hydrophobic characteristics: Use on passive mixers

This work aims to obtain plasma thin film composites with hydrophobic/hydrophilic alternated regions, which are useful for the production of miniaturized mixers. These regions were acquired by two different strategies: either the codeposition of TEOS and HFE plasma thin films or the exposition of TEOS plasma films to ultraviolet radiation (UVA and UVC). These films were characterized by several chemical and physical techniques. The refractive indexes vary from 1.4 to 1.7; infrared and photoelectron spectroscopy detect Si-O-Si and CHn species. Silicone-like structures with high or low number of amorphous carbon microparticles and with fluorinated organic clusters were produced. Cluster dimensions were in the 1-5 mm range and they are made of graphite or COF (carbon/oxygen/fluorine) compounds. Scanning electron and optical microscopy showed rough surfaces. Water contact angles were 90º; however, for TEOS films that value changed after 6 hr of UVC exposure. Moreover, after UV exposure, organic polar compounds could be adsorbed in those films and water was not. The passive mixer performance was simulated using the FemLab 3.2® program and was tested with 20 nm thick films on a silicon wafer, showing the capacity of these films to be used in such devices.

Avaliação da resposta tecidual de extratos de araçá (Psidium Cattleianum) associado ao hidróxido de cálcio: análise edemogênica e histológica em ratos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da diabetes mellitus na resposta tecidual e na capacidade de mineralização dos cimentos Sealapex, MTA Angelus e MTA Fillapex

Pós-graduação em Ciência Odontólogica - FOA