993 resultados para Trissecção de ângulo


Relevância:

10.00% 10.00%

Publicador:

Resumo:

A adesão longitudinal continua a representar um dos maiores desafios da Odontologia moderna. Uma nova proposta para o estabelecimento do equilíbrio da adesão aos tecidos dentários surge, baseada na observação dos resultados obtidos com a tecnologia Grander para revitalização da água. Objetiva-se com o estudo verificar a influência dessa tecnologia nas propriedades físicas de dois sistemas adesivos (convencional e autocondicionante) à partir da medição da tensão superficial e do ângulo de contato; e avaliar a formação e a qualidade da camada híbrida em dentina humana e bovina. A tensão superficial de quatro diferentes líquidos (água, Single Bond- 3M, Primer do Clearfil SE Bond -Kuraray, e Bond do Clearfil SE-Kuraray), foi medida antes e após a modificação pelo procedimento Grander em aparelho goniômetro (Ramé-hart). O ângulo de contato com três substratos distintos (placa de titânio, dentina humana e dentina bovina), foi medido para os quatro líquidos também antes e após a modificação pelo procedimento Grander, também em goniômetro. A formação e qualidade da camada híbrida, foi avaliada em MEV, a partir da confecção de corpos de prova dos substratos humano e bovino, devidamente embutidos, preparados em lixas de variada granulação até a exposição de dentina, submetidos ao procedimento adesivo (SB ou CSEB) normal ou grander modificado, recebendo ao final dupla camada de resina composta Z250-3M, fotopolimerizada por 40s. Após armazenamento em estufa bacteriológica por 24h, os procedimentos para análise ao MEV foram realizados (fixação, desidratação, secagem e metalização). A estatística de Análise de Variância ANOVA e Teste de Tukey 5% revelou que: houve redução estatisticamente significante da tensão superficial para todos os líquidos Grander modificados; houve redução estatisticamente... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

As características estruturais de sonogéis obtidos a partir da hidrólise ácida do TEOS estimulada por ultrasom foram estudadas por espalhamento de raios-x a baixo ângulo (SAXS). O estudo inclui: i) o processo de agregação em diferentes temperaturas; ii) o envelhecimento dos géis úmidos na fase líquida de preparação e depois da troca da fase líquida por álcool e acetona; iii) a secagem dos géis; iv) a estrutural evolução de xerogéis e aerogéis com o tratamento térmico até 1100 oC; e v) um estudo comparativo usando SAXS e adsorção de nitrogênio na caracterização de aerogéis e xerogéis... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Individuals with spastic cerebral palsy show muscle weakness, difficulties in the control of agonist and antagonist muscles, decreased range of motion and tonus and sensibility alterations, especially in knee joint. These problems can interfere on the performance of functional activities such gait. The aim of this study was to analyze the contribution of knee range of motion on gait of hemiplegic and diplegic children considering their asymmetries. Twelve children, 6 hemiplegics e 6 diplegics from 7 to 12 years of age (age average= 9,5 ± 1,93) took part. Spasticity was assessed by the Ashworth’s Modified Scale and the passive knee range of motion by an eletrogoniometer. The task was to walk on a walkway of 8m long, in their preferred speed, in 6 attempts, been 3 on right and 3 on left sagital planes. Eigth passive markers were bilaterally fixed for the kinematic record. Orthogonally to the walkway, two digital camcorders were assembled on the sagital plane. The fotogrametric procedures were performed by the Dvideow 6.3 software. The Matlab 7.0.1 software was used to filter and to calculate the dependent variables. The U test of Mann- Whitney found differences to the cerebral palsy type for knee extension/hiperextension (U = - 2.943; p= 0.003), knee relative angle at heel contact (U = - 5.992; p= 0.001) and knee range during stride (U = - 4.099; p= 0.001). The Wilcoxon’s test revealed differences according to the asymmetries for the hemiplegics only for the knee relative angle at heel contact (T= - 2.635; p<0.008). The contributions of passive knee range of motion, revealed by the Spearman correlations, for the more afected limb of the diplegics, showed that the knee extension/hiperextension interfere on the cadence, stride duration and step width; the knee relative angle at heel contact change the stride length and duration and cadence; and the...(Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aims of this work are to analyze the direct solar radiation pressure torque (TPRS) in the rotational motion of spin-stabilized artificial satellites, to numerically implement these solutions and to compare the results with real data of the Brazilian Satellite Data Collection – SCD1 and SCD2, supplied by INPE. The mathematical model for this torque is determined for a cylindrical satellite, and the components of this torque are determined in a fixed system in the satellite. An analytical solution for the spin motion equations is proposed, in which TPRSD does not affect the spin velocity of the satellite. Two approaches are adopted in the numerical implementation of the developed theory: the first one considers the proposed theory and the second introduces a variation in the spin velocity based on its real variation. The results obtained indicate that the solar radiation pressure torque has little influence in the right ascension and declination axis of rotation due to the small dimension of the satellite and altitude in which it is found. To better validate the application of the presented theory, the angular deviation of the spin axis and solar aspect angle were also analyzed. The comparison of the results of the approaches conducted with real data show good precision in the theory, which can be applied in the prediction of the rotational motion of the spin-stabilized artificial satellites, when others external torques are considered besides the direct solar radiation pressure torque

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A corrida de aproximação para o chute no futsal é de extrema importância para o desempenho, pois um mau início do movimento poderá acarretar em grandes dificuldades para o resultado final do chute. Além disso, a posição do pé de suporte em relação à bola determina a direção do chute e, conseqüentemente, o desempenho dos atletas. Há evidências que a corrida de aproximação pode aumentar sensivelmente a velocidade da bola. Assim, o objetivo deste estudo foi analisar e comparar os parâmetros espaços-temporais da corrida de aproximação e os aspectos de desempenho (precisão e velocidade da bola) durante o chute com o dorso do pé realizado com a bola em posição estacionária e com a bola em deslocamento no futsal. Participaram deste estudo cinco jogadores destros e cinco jogadores sinistros de futsal. Os participantes realizaram cinco chutes com a bola parada e cinco chutes com a bola em deslocamento. Os chutes foram realizados após um sinal sonoro e a dez metros do gol (tiro livre). Nos chutes com a bola parada, esta foi posicionada sobre o tiro livre. Nos chutes com a bola em deslocamento foi utilizada uma rampa para padronizar a velocidade e direção de chegada da bola para os chutes. A coleta dos dados foi realizada em uma quadra oficial de futsal e os chutes foram filmados por seis câmeras digitais. Foram analisadas as seguintes variáveis: velocidade da corrida de aproximação, distância do pé de suporte para a bola, ângulo de aproximação para a bola, distância do participante para realizar o chute, velocidade da bola, comprimento e largura de cada passo durante a corrida de aproximação, número de passos e precisão no chute. As variáveis dependentes foram avaliadas através da análise da variância (ANOVA) com medidas repetidas, tendo fator para tipo de chute. O nível de significância foi mantido em p< 0,05. A análise estatística revelou diferenças... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O presente estudo, que aborda a avaliação postural de crianças com Paralisia Cerebral (PC), teve como objetivos: avaliar o alinhamento da postura e controle postural nessas crianças e descrever o posicionamento dos segmentos corporais na postura ereta em vista anterior, posterior, lateral direita e esquerda. Foram avaliados, através do SAPO, 7 indivíduos com PC que se mantinham na posição ortostática sem apoio. Foi feita estatística descritiva e uma comparação dos valores de referência (teste t-Student) com nível de significância 5% para todas variáveis. No ângulo Q esquerdo (vista anterior), houve diferença significativa do valor de referência p=0,476. O ângulo perna/retropé direito (vista posterior) apresentou p=0,0257. Para a vista lateral direita: Alinhamento horizontal da cabeça (C7) obteve p<0,001; Ângulo do quadril (tronco e coxa), p=0,0126; Alinhamento horizontal da pelve, p=0,0043 e o Ângulo do Tornozelo p<0,001. Para a vista lateral esquerda: Alinhamento horizontal da cabeça (C7), p<0,001; Alinhamento horizontal da pelve p=0,0332 e o Ângulo do tornozelo obteve p-valor<0,001. Houve evidente anteversão pélvica dos sujeitos com possível aumento da lordose lombar, alterações relacionadas a joelhos e tornozelos que podem ser causadas por assimetrias das forças atuantes em seguimentos superiores e anteriorização da cabeça. Seis das sete crianças apresentaram seu centro de gravidade deslocado para o lado contralateral ao hemicorpo afetado. Sendo a PC uma desordem do movimento e postura e, levando em consideração que alterações posturais decorrentes desta desordem podem interferir no desempenho motor, sugerimos estudos que relacionem esses fatores, promovendo uma intervenção em crianças com PC baseada em evidências

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper we study the process of manufacture of wire drawn steel bars 9254, from rolled wire rod. These bars are used in the automotive industry for the manufacture of coil springs, which make up the system damping of several vehicles. The wire drawing process consists of the steps of pre-straightening, shot peening, drawing, cutting and polishing. The study aims to search for the configuration of process variables, which present the best result with respect to bending. To this were maintained settings prestraightening and mechanical stripping and varied angles and stringer polish being studied to replace the spinneret with a working angle, for a string with two working angles. To assist in the analysis of the results was the tool used DOE Software Minitab, which assesses the variation in results according to each parameter and the interaction parameters. It was thus possible to determine the best condition for wire drawing

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ultimamente várias áreas da ciência vêm se unindo a fim de compreender, elucidar, retardar e reverter o processo do envelhecimento da pele. Tal processo deve ser estudado, pois as mudanças no aspecto exterior podem revelar disfunções que ocorrem internamente, além de trazer conseqüências psíquicas sobre o comportamento da pessoa, tanto diante de si mesma como diante das outras. A utilização de matérias-primas naturais orgânicas em formulações farmacêuticas e cosméticas segue uma tendência de mercado, haja vista o grande impulso que o mercado orgânico tem ocasionado na economia. Dentre estas matérias-primas, destaca-se a utilização do cacau orgânico que, pelo fato de ser rico em compostos polifenólicos e taninos condensados, acredita-se apresentar potencial ação antioxidante. Associados a sistemas nanoestruturados inovadores, como os sistemas líquido-cristalinos constituídos por silicones formadores de filme, a ação antioxidante do cacau orgânico pode, dessa forma, ser potencializada. Este trabalho tem como objetivos desenvolver e caracterizar sistemas líquido-cristalinos acrescidos de extrato de semente de cacau orgânico, avaliar a estabilidade físico-química e a atividade antioxidante das formulações obtidas. Realizou-se a caracterização do pó de cacau por microscopia óptica. A partir do pó do cacau, obteve-se extratos hidroalcóolicos do pó, a partir do qual foram quantificados compostos fenólicos utilizando o reagente Folin-Ciocalteu e determinada a atividade antioxidante com base na ação seqüestrante do radical 1,1-difenil-2-picrilhidrazila (DPPH). Posteriormente, o extrato foi incorporado em um sistema constituído por acido oléico e polioxietileno 20 cetil éter, o qual foi caracterizado estruturalmente empregando análises de microscopia de luz polarizada, espalhamento de raios-X a baixo ângulo (SAXS) e comportamento reológico... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study attempts a preliminary assessment of the behavior of a soil improvement system with the use of encased columns of granular material with geosynthetic (columns Ringtrac ® ). This evaluation was performed using the software Ringtrac ® (developed by Huesker GmbH, Germany), which required different parameters such as soil Oedometric Module, friction angle of soil, thickness of soft soil and the embankment height .In each analysis, one parameter was varied and the other different parameters considered were fixed, resulting in a total of 726 results. Were considered valid only the results where the radial deformation of the geosynthetic encased column did not exceed the value of 4%, which is the maximum radial deformation of the geosynthetic adopted by the Ringtrac ® program. The analysis results are shown graphically in this study, evaluating the tension values in the column and obtained settlements in each analysis. It’s proven in this preliminary study that the variation of the soft soil friction angle in the Ringtrac ® column, will not significantly affect the values of strain on the tension in the column and settlements on the ground. Furthermore, the variation of Oedometric Module on the soil, will significantly affect the tension values in the column and the settlements in the soil

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Due the differences between interaction physics process with matter for protons and photons, the proton beam tomography (pCT) has some vantages to comparison with conventional tomography. Also it is confirmed that usually pCT has better dose distribution and highest contrast resolution. The pCT allow not only view the internal structure of an object without destroying it, but also directly measure of volume density of electrons. Also it is confirmed that usually pCT has better dose distribution and highest contrast resolution. At the same time, there are many scientific and technical aspects to a detailed study: the capacity and limitations of the pCT methods are not well clarified. Through computations, based on Monte Carlo Method was carried out a detailed study of the contribution of non-elastic nuclear spreading, and together was compared with an analytical model for the deflection angle and the lateral deflection of protons in the target volume. The programs used were SRIM 2006 code and MCNPX v.2.50 code

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thin polymeric films deposited by plasma are very atractive for many industrial and scientific applications, in areas such as electronics, mechanics, coatings, biomaterials, among others, due to its favorable properties such as good adhesion to the substrate, high crosslinking, nanomectric thickness, homogeneity, etc. In this work, thin films were deposited by plasma immersion ion implantation and deposition technique from a hexamethyldisilazane/argon mixture at different proportions. These films were subjected to several characterizations, such as, contact angle, which presented values near to 100 degrees, surface energy, with values near to 31 mJ/m2, hardness with values between 0.7 and 2.6 GPa, thickness from 100 to 200 nm, refractive index from 1.56 to 1.64, molecular structure presenting the following functional groups in the infrared spectra region: CHx from 2960 to 2900 cm-1; Si-H around 2130 cm-1; CH3 in Si-(CH3)x around 1410 cm-1; CH3 in Si-(CH3)x in 1260 cm-1; N-H around 1180 cm-1; CH2 in Si-CH2-Si bonds around 1025 cm-1; Si-O in Si-O-Si from 1020 to 1100 cm-1; Si-N in Si-H-Si bonds around 940 cm-1; CH3 in Si-(CH3)3 in 850 cm-1; Si-C bonds in Si-(CH3)2 around 800 cm-1; and Si-H in 680 cm-1 . From these characterizations, it was possible to conclude that the concentration of argon or hexamethyldisilazane in the mixture changed the resulting polymer

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The study area is located in the geological context of the northern portion of the Rio Itapicuru Greenstone Belt (GBRI), located northeast of the São Francisco Craton, Bahia State. The GBRI is known for its great economic potential for gold mineralization, looking south at Fazenda Brasileiro Mine and North Mine Maria Preta, is situated in the study área. The structural pattern of the northern portion of the Greenstone, theme of this work, is of great importance to understand the mineralization present. To characterize the structural model three geologic sections (scale 1:25000) were made with NW-SE and EW directions and detailing two mineralized targets, Encantado, located northwest of the area, near the city of Nordestina, and C1W, located near Itapicuru River, west of the Maria Preta mine. Thus, field work and petrographic analysis were conducted, that allow to indicate the existence of two structural domains characterized by the existence of a main foliation, low angle dipping main foliation and another with high dip angle, both with NW, moreover, folds occur in the area Dn-1 and post-Dn folds. Dn-1 folds are observed less frequently but they occur mainly forming an oblique foliation and the Sn is present in porphyroblasts observed in petrographic analysis, whereas in relation to the folds post Dn, there are more than one type of folding in area, which differ by the orientation of their axis, a post Dn NS and EW Dn another post. Moreover, two areas of metamorphic green schist (biotite zone) and medium amphibolite, which are directly related to the structural domains found

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Vazante Fault Zone (VFZ), located northwestward of Minas Gerais, host the largest zinc deposit known in the Brazilian territory. This structure is hosted in Vazante’s Group rocks, a metassedimentary sequence of marine environment. Near Vazante is situated the south end of the VFZ. To the west, occur the Serra do Garrote inflexion, characterized by a curvature in the contact of Formations Serra do Garrote and Serra do Poço Verde. This structure is through the analysis of aerial imagery of the region and represented in the published geological maps. The objective of this work is to understand what causes this inflexion and determine whether it affects the VZF, causing a shift in the same, and possibly, in the mineralization as well. To this end, it was done a mapping work in the region covering the Serra do Garrote inflexion and the south end of the VFZ, in 1:25.000 scale, supplemented by petrographic description of thin section and geologic sections, with cooperated to the understanding of the structural evolution of the region. Data analysis allowed the identification of six deformation phases. The D1 an D2 phases generated the main foliation. The D3 phase generate kink bands folds, with NS axis and vertical axial plane. The fourth phase is responsible for generating the Vazante Fault Zone. The fifth phase produces low angle folds and shear zones, subparallel to S1//S2. The last phase generates folds with NW axis and vertical axial plane, with causes the inflection of lithologic contactas. Field observations also make possible the conclusion that the Vazante Fault Zone presents a south continuation, which is affected by deformation associated to D6 phase attributing to the trace of the VFZ a curved geometry, similar to that exhibited by lithologic contacts between units of the map

Relevância:

10.00% 10.00%

Publicador:

Resumo:

INTRODUCTION: Scoliosis is a three-dimensional deformity and it can be influenced by the use of shoe lifts and lateral inclination in order to correct postural asymmetries. OBJECTIVE: To verify the effect of the use of the shoe lifts (lower and high) unilateral (right and left) during the movement of lateral inclination (right and left) for an evaluation of the postural angles in patients with idiopathic scoliosis. METHODS: A control group with ten participants without scoliosis and an experimental group with 10 participants with idiopathic scoliosis of double curves (thoracic right and lumbar to the left). Ten reflexive markers were fixed in the spine to determine the postural angles (alpha 1=T2T4-T4T6, alpha 2=T6T8-T8T10, alpha 3=T10T12-T12L2 and alpha 4=L2L4-L4S1)... (Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work, air dielectric barrier discharge (DBD) operating at two different frequencies (60 Hz and 17 kHz) was used to improve surface properties of polypropylene (PP). The changes in surface hydrophilicity were investigated by contact angle measurements. The modifications in chemical composition of PP surface were studied by X-ray photoelectron spectroscopy (XPS) and Fourier-transformed infrared spectroscopy (FTIR). The PP roughness were analyzed before and after the DBD treatment using atomic force microscopy (AFM). In order to compare the results obtained at different frequencies, the analyses are presented as a function of the deposited energy density. The results show that both DBD treatments led to formation of low-molecular weight oxidized material (LMWOM). It tends to agglomerate into small mounts on the surface, as shown by AFM analyses. These structures are weakly bounded to the surface and can be easily removed by rinsing in polar solvents. After washing the DBD-treated samples, the PP partially recovers its original wetting characteristics. This suggests that oxidation also occurred at deeper and more permanent levels on the PP samples. Comparing both DBD treatments, the 17 kHz process was found to be more efficient in introducing oxygen groups to the PP surface