Recent advances in tropical freshwater aquaculture

Several technological advances have been made in tropical freshwater aquaculture during the last three decades. Hatchery production of carp seed was achieved in India and China towards the late 1950's. Channel catfish farming in the U.S. has grown phenomenally. Development of the technology of high density culture using artificial aeration and nutritionally balanced diets has revolutionized freshwater aquaculture, particularly in Israel. Culture of fishes in cages, pens and running water have helped to achieve very high production levels. Considerable research work has been done on fish nutrition during recent years. Investigations on sex control reveal that it is possible to produce a single sex progeny which is more desirable for culture.

Early and better maturity in carp brood stock with control of environment and feeding

Available of carp breeders in their prim state of maturity is a major constraint in hypophysation. Experiments conducted in a fish farm at Naihati, West Bengal, for two consecutive years, 1983-84 and 1984-85, clearly prove that by manipulation of environmental parameters such as metabolites, dissolved oxygen, running water conditions, as also of stock densities and quality and quantity of feed. Catla catla, Hypophythalmichthys molitrix, Labeo rohita, Cirrhina mrigala and Ctenopharyngodon idella can be made to attain better maturity and spawning stage much earlier than normal i.e. even in summer months and the entire stock spawned during the period from March to September. Percentage of successful breeding, quantities of eggs released and fertilised in relation to the body weight of all the species, were also found to be more in comparison to the brood stock raised through the conventional methods.

ABRASIVE WEAR OF LUBRICATED CONTACTS.

A foil bearing arrangement has been used to investigate the wear of carbon graphite materials running against 316 stainless steel in the presence of a hydrodynamic film of fluid contaminated with particulate material. As the thickness of the fluid film is reduced so the wear rate of the carbon reaches a maximum value, further reductions in thickness actually producing reduced wear rates. Possible mechanisms and implications of this behaviour are discussed.

Results of the Austrian-Ceylonese hydrobiological mission 1970 of the 1st Zoological Institute of the University of Vienna (Austria) and the Department of Zoology of the Vidyalankara University of Ceylon, Kelaniya. Pt. 9. Dytiscidae (Coleoptera)

The intensive collecting of Prof. Dr. F. Starmühlner and Prof. Dr. H. H. Costa in Ceylon in 1970 produced among others some Dysticidae. The material turned out to be especially interesting as it comes all together from running waters, in which otherwise collecting is infrequent. From Sri Lanka quite a lot of species of Dytiscidae are already known.

Results of the Austrian-Ceylonese hydrobiological mission 1970 of the 1st Zoological Institute of the University of Vienna (Austria) and the Department of Zoology of the University of Ceylon Vidyalankara Campus, Kelaniya. Pt. 12. Contributions to the ecology of the larvae of some Odonata from Ceylon

The Austrian-Ceylonese hydrobiological mission studied 38 biotopes; 28 of which contain Odonata. From the Zygoptera the Calopterydoidea seem to be the dominant form (22 habitats), while the Coenagrionoidea are scarcer (11 habitats). The most frequent species was Euphaea splendens (Epallagidae - 16 habitats) followed by Vestolis apicalis nigrescens (Calopterygidae, 8 habitats) and Neurobasis chinensis (Calopterygidae, 6 habitats). From the Anisoptera Zygonyx ceylanica (Libellulidae: Zygonictinae) was the dominant form (8 habitats), but some Libellulinae remain undescribed. The number of species varied greatly between different biotopes. The biotopes containing Odonata are small brooks, in which the pH was mostly on the limit between acid and alkaline reaction. They are fast running waters, situated in most cases on lower or middle elevations, only three species being found in higher elevations (1800-2000 m). Adaptations to fast currents and other factors are described.

Results of the Austrian-Ceylonese hydrobiological mission 1970 of the 1st Zoological Institute of the University of Vienna (Austria) and the Department of Zoology of the University of Ceylon, Vidyalankara Campus, Kelaniya. Pt. 14. The freshwater crabs of the Ceylonese mountain rivers

The report deals with the material on freshwater crabs, collected by the Austrian-Ceylonese hydrobiological mission 1970 from the running waters of the mountains in south-west Ceylon. The locality records for Paratelphusa (Oziotelphusa) senex (Fabricius 1798) Paratelphusa (Ceylontelphusa) sorror (Zehntner 1894) and Paratelphusa (Ceylontelphusa) rugosa (Kingsley 1880), are described.

Circulation system and areas of potentially successful tuna fishing with surface methods off Mozambique

Charts with 3-months running means of thermal data collected during 1977-1982 are used to describe the seasonal variability of the circulation pattern off Mozambique, and to identify the areas of tuna vulnerability to surface gears. The main conclusions reached by Sætre and Jorge da Silva (1984) have received further support. Areas of potentially successful exploitation of tunas by surface methods have been identified during the whole year, with emphasis for November-April.

Unsteady shock motion on a NACA0012 aerofoil at low reduced frequencies

Using transonic blowdown windtunnel experiments, the 2D unsteady shock motion on a NACA0012 aerofoil is examined at various frequencies typical for helicopter blades in forward flight. The aerofoil is subjected to freestream velocities oscillating periodically between M = 0.66 and M = 0.77. Unsteady pressure traces and schlieren images are analyzed over a range of low reduced frequencies to provide information on shock location and strength throughout the cycle. Unsteady effects were noticeable even at very low reduced frequencies (down to O(0.01). However, through the range of frequencies investigated, and within experimental error, the unsteady shock location showed no discernible lag compared to the quasi-steady behaviour. On the other hand, significant variations were observed in shock strengths with the upstream running part of the cycle (decreasing Mach number) displaying considerably stronger shocks than during the accelerating part of the cycle. It could be shown that this variation in shock strength is primarily caused by the shock motion modifying the relative shock Mach number. As a result is was possible to use the quasi-steady results to predict the unsteady shock behaviour at the frequencies investigated here (below 0(0.1)).

Unsteady shock motion on a NACA0012 aerofoil at low reduced frequencies

Using transonic blowdown windtunnel experiments, the 2D unsteady shock motion on a NACA0012 aerofoil is examined at various frequencies typical for helicopter blades in forward flight. The aerofoil is subjected to freestream velocities oscillating periodically between M = 0.66 and M = 0.77. Unsteady pressure traces and schlieren images are analyzed over a range of low reduced frequencies to provide information on shock location and strength throughout the cycle. Unsteady effects were noticeable even at very low reduced frequencies (down to O(0.01). However, through the range of frequencies investigated, and within experimental error, the unsteady shock location showed no discernible lag compared to the quasi-steady behaviour. On the other hand, significant variations were observed in shock strengths with the upstream running part of the cycle (decreasing Mach number) displaying considerably stronger shocks than during the accelerating part of the cycle. It could be shown that this variation in shock strength is primarily caused by the shock motion modifying the relative shock Mach number. As a result is was possible to use the quasi-steady results to predict the unsteady shock behaviour at the frequencies investigated here (below 0(0.1)).

Results of the Austrian-Ceylonese hydrobiological mission 1970 of the 1st Zoological Institute University of Vienna (Austria) and the Department of Zoology of the University of Ceylon, Vidyalankara Campus, Kelaniya (Sri Lanka). Pt 17. The freshwater gastropods of Ceylon

In the present study the specimens collected by the Austrian-Ceylones hydrobiological mission 1970 are described. The freshwater gastropods in this study were collected from 100 different localities, mostly running waters, but some were also collected from stagnant waters like pools, irrigated paddy fields, swamps and water reservoirs (tanks). Listed from these localities are 31 species (and subspecies) 28 species are Streptoneura (=Prosobranchia), 3 species are Euthyneura-Pulmonata Basommatophora.

A three-dimensional tunnel model for calculation of train-induced ground vibration

The frequency range of interest for ground vibration from underground urban railways is approximately 20 to 100 Hz. For typical soils, the wavelengths of ground vibration in this frequency range are of the order of the spacing of train axles, the tunnel diameter and the distance from the tunnel to nearby building foundations. For accurate modelling, the interactions between these entities therefore have to be taken into account. This paper describes an analytical three-dimensional model for the dynamics of a deep underground railway tunnel of circular cross-section. The tunnel is conceptualised as an infinitely long, thin cylindrical shell surrounded by soil of infinite radial extent. The soil is modelled by means of the wave equations for an elastic continuum. The coupled problem is solved in the frequency domain by Fourier decomposition into ring modes circumferentially and a Fourier transform into the wavenumber domain longitudinally. Numerical results for the tunnel and soil responses due to a normal point load applied to the tunnel invert are presented. The tunnel model is suitable for use in combination with track models to calculate the ground vibration due to excitation by running trains and to evaluate different track configurations. © 2006 Elsevier Ltd. All rights reserved.

Addressing the cognitive and social influence inhibitors during the ideation stages of technology roadmapping workshops

Technology roadmapping workshops are essentially a social mechanism for exploring, creating, shaping and implementing ideas. The front-end of a roadmapping session is based on brainstorming in order to tap into the group's diverse knowledge. The aim of this idea stimulation activity is to capture and share as many perspectives as possible across the full scope of the area of interest. The premise to such group brainstorming is that the sharing and exchange of ideas leads to cognitive stimulation resulting in a greater overall group idea generation performance in terms of the number, variety and originality of ideas. However, it must be recognized that the ideation stage in a roadmapping workshop is a complex psychosocial phenomenon with underlying cognitive and social processes. Thus, there are downsides to group interactions and these must be addressed in order to fully benefit from the power of a roadmapping workshop. This paper will highlight and discuss the key cognitive and social inhibitors involved. These include: production blocking, evaluation apprehension, free riding/social loafing, low norm setting/matching. Facilitation actions and process adjustments to counter such negative factors will be identified so as to provide a psychosocial basis for improving the running of roadmapping workshops. © 2009 PICMET.

Analysis of in-cylinder hydrocarbons in a multi-cylinder gasoline HCCI engine using gas chromatography

Gasoline Homogeneous Charge Compression Ignition (HCCI) combustion has been studied widely in the past decade. However, in HCCI engines using negative valve overlap (NVO), there is still uncertainty as to whether the effect of pilot injection during NVO on the start of combustion is primarily due to heat release of the pilot fuel during NVO or whether it is due to pilot fuel reformation. This paper presents data taken on a 4-cylinder gasoline direct injection, spark ignition/HCCI engine with a dual cam system, capable of recompressing residual gas. Engine in-cylinder samples are extracted at various points during the engine cycle through a high-speed sampling system and directly analysed with a gas chromatograph and flame ionisation detector. Engine parameter sweeps are performed for different pilot injection timings and quantities at a medium load point. Results show that for lean engine running conditions, earlier pilot injection timing leads to partial oxidation of the injected pilot fuel during NVO, while the fraction of light hydrocarbons remains constant for all parameter variations investigated. The same applies for a variation in pilot fuel amount. Thus there is evidence that in lean conditions, pilot injection-related NVO effects are dominated by heat release rather than fuel reformation. © 2009 SAE International.

SBLOCK: A framework for efficient stencil-based PDE solvers on multi-core platforms

We present a new software framework for the implementation of applications that use stencil computations on block-structured grids to solve partial differential equations. A key feature of the framework is the extensive use of automatic source code generation which is used to achieve high performance on a range of leading multi-core processors. Results are presented for a simple model stencil running on Intel and AMD CPUs as well as the NVIDIA GT200 GPU. The generality of the framework is demonstrated through the implementation of a complete application consisting of many different stencil computations, taken from the field of computational fluid dynamics. © 2010 IEEE.

Studies on blue discolouration in canned body meat of crab (Scylla serrata)

Blue discolouration met with in the canned body meat of crab (Scylla serrata) was due to copper content exceeding 1.8 to 2.0 mg/100g on dry weight basis. Bleeding the cleaned carcasses of crab thoroughly in running water brought down the copper content below this level and blue discolouration prevented. Addition of copper ions to the thoroughly bled crab meat to raise the copper content above this level caused discolouration. The incidence of blue discolouration was independent of the freshness of the animals used. Citric acid in high concentration prevented blueing to some extent, but is not advisable as texture and flavour were adversely affected.