The EarthCARE satellite: the next step forward in global measurements of clouds, aerosols, precipitation, and radiation

The collective representation within global models of aerosol, cloud, precipitation, and their radiative properties remains unsatisfactory. They constitute the largest source of uncertainty in predictions of climatic change and hamper the ability of numerical weather prediction models to forecast high-impact weather events. The joint European Space Agency (ESA)–Japan Aerospace Exploration Agency (JAXA) Earth Clouds, Aerosol and Radiation Explorer (EarthCARE) satellite mission, scheduled for launch in 2018, will help to resolve these weaknesses by providing global profiles of cloud, aerosol, precipitation, and associated radiative properties inferred from a combination of measurements made by its collocated active and passive sensors. EarthCARE will improve our understanding of cloud and aerosol processes by extending the invaluable dataset acquired by the A-Train satellites CloudSat, Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and Aqua. Specifically, EarthCARE’s cloud profiling radar, with 7 dB more sensitivity than CloudSat, will detect more thin clouds and its Doppler capability will provide novel information on convection, precipitating ice particle, and raindrop fall speeds. EarthCARE’s 355-nm high-spectral-resolution lidar will measure directly and accurately cloud and aerosol extinction and optical depth. Combining this with backscatter and polarization information should lead to an unprecedented ability to identify aerosol type. The multispectral imager will provide a context for, and the ability to construct, the cloud and aerosol distribution in 3D domains around the narrow 2D retrieved cross section. The consistency of the retrievals will be assessed to within a target of ±10 W m–2 on the (10 km)2 scale by comparing the multiview broadband radiometer observations to the top-of-atmosphere fluxes estimated by 3D radiative transfer models acting on retrieved 3D domains.

The role of evaporating showers in the transfer of sting-jet momentum to the surface

The most damaging winds in a severe extratropical cyclone often occur just ahead of the evaporating ends of cloud filaments emanating from the so-called cloud head. These winds are associated with low-level jets (LLJs), sometimes occurring just above the boundary layer. The question then arises as to how the high momentum is transferred to the surface. An opportunity to address this question arose when the severe ‘St Jude's Day’ windstorm travelled across southern England on 28 October 2013. We have carried out a mesoanalysis of a network of 1 min resolution automatic weather stations and high-resolution Doppler radar scans from the sensitive S-band Chilbolton Advanced Meteorological Radar (CAMRa), along with satellite and radar network imagery and numerical weather prediction products. We show that, although the damaging winds occurred in a relatively dry region of the cyclone, there was evidence within the LLJ of abundant precipitation residues from shallow convective clouds that were evaporating in a localized region of descent. We find that pockets of high momentum were transported towards the surface by the few remaining actively precipitating convective clouds within the LLJ and also by precipitation-free convection in the boundary layer that was able to entrain evaporatively cooled air from the LLJ. The boundary-layer convection was organized in along-wind rolls separated by 500 to about 3000 m, the spacing varying according to the vertical extent of the convection. The spacing was greatest where the strongest winds penetrated to the surface. A run with a medium-resolution version of the Weather Research and Forecasting (WRF) model was able to reproduce the properties of the observed LLJ. It confirmed the LLJ to be a sting jet, which descended over the leading edge of a weaker cold-conveyor-belt jet.

The impact of charge transfer and structural disorder on the thermoelectric properties of cobalt intercalated TiS2

A family of phases, CoxTiS2 (0 ≤ x ≤ 0.75) has been prepared and characterised by powder X-ray and neutron diffraction, electrical and thermal transport property measurements, thermal analysis and SQUID magnetometry. With increasing cobalt content, the structure evolves from a disordered arrangement of cobalt ions in octahedral sites located in the van der Waals’ gap (x ≤ 0.2), through three different ordered vacancy phases, to a second disordered phase at x ≥ 0.67. Powder neutron diffraction reveals that both octahedral and tetrahedral inter-layer sites are occupied in Co0.67TiS2. Charge transfer from the cobalt guest to the TiS2 host affords a systematic tuning of the electrical and thermal transport properties. At low levels of cobalt intercalation (x < 0.1), the charge transfer increases the electrical conductivity sufficiently to offset the concomitant reduction in |S|. This, together with a reduction in the overall thermal conductivity leads to thermoelectric figures of merit that are 25 % higher than that of TiS2, ZT reaching 0.30 at 573 K for CoxTiS2 with 0.04 ≤ x ≤ 0.08. Whilst the electrical conductivity is further increased at higher cobalt contents, the reduction in |S| is more marked due to the higher charge carrier concentration. Furthermore both the charge carrier and lattice contributions to the thermal conductivity are increased in the electrically conductive ordered-vacancy phases, with the result that the thermoelectric performance is significantly degraded. These results illustrate the competition between the effects of charge transfer from guest to host and the disorder generated when cobalt cations are incorporated in the inter-layer space.

Proper evaluation of the external convective heat transfer for the thermal analysis of cool roofs

Cool materials are characterized by high solar reflectance and high thermal emittance; when applied to the external surface of a roof, they make it possible to limit the amount of solar irradiance absorbed by the roof, and to increase the rate of heat flux emitted by irradiation to the environment, especially during nighttime. However, a roof also releases heat by convection on its external surface; this mechanism is not negligible, and an incorrect evaluation of its entity might introduce significant inaccuracy in the assessment of the thermal performance of a cool roof, in terms of surface temperature and rate of heat flux transferred to the indoors. This issue is particularly relevant in numerical simulations, which are essential in the design stage, therefore it deserves adequate attention. In the present paper, a review of the most common algorithms used for the calculation of the convective heat transfer coefficient due to wind on horizontal building surfaces is presented. Then, with reference to a case study in Italy, the simulated results are compared to the outcomes of a measurement campaign. Hence, the most appropriate algorithms for the convective coefficient are identified, and the errors deriving by an incorrect selection of this coefficient are discussed.

Coming of age in L3 initial stages transfer models: deriving developmental predictions and looking towards the future

Aims: Over the past decade in particular, formal linguistic work within L3 acquisition has concentrated on hypothesizing and empirically determining the source of transfer from previous languages—L1, L2 or both—in L3 grammatical representations. In view of the progressive concern with more advanced stages, we aim to show that focusing on L3 initial stages should be one continued priority of the field, even—or especially—if the field is ready to shift towards modeling L3 development and ultimate attainment. Approach: We argue that L3 learnability is significantly impacted by initial stages transfer, as such forms the basis of the initial L3 interlanguage. To illustrate our point, the insights from studies using initial and intermediary stages L3 data are discussed in light of developmental predictions that derive from the initial stages models. Conclusions: Despite a shared desire to understand the process of L3 acquisition in whole, inclusive of offering developmental L3 theories, we argue that the field does not yet have—although is ever closer to—the data basis needed to effectively do so. Originality: This article seeks to convince the readership for the need of conservatism in L3 acquisition theory building, whereby offering a framework on how and why we can most effectively build on the accumulated knowledge of the L3 initial stages in order to make significant, steady progress. Significance: The arguments exposed here are meant to provide an epistemological base for a tenable framework of formal approaches to L3 interlanguage development and, eventually, ultimate attainment.

Relational architecture and relational capability: organisational levers to support strategic supplier relationships

The resource based view of strategy suggests that competitiveness in part derives from a firms ability to collaborate with a subset of its supply network to co-create highly valued products and services. This relational capability relies on a foundational intra and inter-organisational architecture, the manifestation of strategic, people, and process decisions facilitating the interface between the firm and its strategic suppliers. Using covariance-based structural equation modelling we examine the relationships between internal and external features of relational architecture, and their relationship with relational capability and relational quality. This is undertaken on data collected by mail survey. We find significant relationships between both internal and external relational architecture and relational capability and between relational capability and relational quality. Novel constructs for internal and external elements of relational architecture are specified to demonstrate their positive influence on relational capability and relationship quality.

Digital image correlation analysis of the load transfer by implant-supported restorations

This study compared splinted and non-splinted implant-supported prosthesis with and without a distal proximal contact using a digital image correlation method. An epoxy resin model was made with acrylic resin replicas of a mandibular first premolar and second molar and with threaded implants replacing the second premolar and first molar. Splinted and non-splinted metal-ceramic screw-retained crowns were fabricated and loaded with and without the presence of the second molar. A single-camera measuring system was used to record the in-plane deformation on the model surface at a frequency of 1.0 Hz under a load from 0 to 250 N. The images were then analyzed with specialist software to determine the direct (horizontal) and shear strains along the model. Not splinting the crowns resulted in higher stress transfer to the supporting implants when the second molar replica was absent. The presence of a second molar and an effective interproximal contact contributed to lower stress transfer to the supporting structures even for non-splinted restorations. Shear strains were higher in the region between the molars when the second molar was absent, regardless of splinting. The opposite was found for the region between the implants, which had higher shear strain values when the second molar was present. When an effective distal contact is absent, non-splinted implant-supported restorations introduce higher direct strains to the supporting structures under loading. Shear strains appear to be dependent also on the region within the model, with different regions showing different trends in strain changes in the absence of an effective distal contact. (C) 2011 Elsevier Ltd. All rights reserved.

Loss of Methylation at H19 DMD Is Associated with Biallelic Expression and Reduced Development in Cattle Derived by Somatic Cell Nuclear Transfer

Although cloning of mammals has been achieved successfully, the percentage of live offspring is very low because of reduced fetal size and fewer implantation sites. Recent studies have attributed such pathological conditions to abnormal reprogramming of the donor cell used for cloning. The inability of the oocyte to fully restore the differentiated status of a somatic cell to its pluripotent and undifferentiated state is normally evidenced by aberrant DNA methylation patterns established throughout the genome during development to blastocyst. These aberrant methylation patterns are associated with abnormal expression of imprinted genes, which among other genes are essential for normal embryo development and gestation. We hypothesized that embryo loss and low implantation rates in cattle derived by somatic cell nuclear transfer (SCNT) are caused by abnormal epigenetic reprogramming of imprinted genes. To verify our hypothesis, we analyzed the parental expression and the differentially methylated domain (DMD) methylation status of the H19 gene. Using a parental-specific analysis, we confirmed for the first time that H19 biallelic expression is tightly associated with a severe demethylation of the paternal H19 DMD in SCNT embryos, suggesting that these epigenetic anomalies to the H19 locus could be directly responsible for the reduced size and low implantation rates of cloned embryos in cattle.

Viable Calves Produced by Somatic Cell Nuclear Transfer Using Meiotic-Blocked Oocytes

Somatic cell nuclear transfer (SCNT) has had an enormous impact on our understanding of biology and remains a unique tool for multiplying valuable laboratory and domestic animals. However, the complexity of the procedure and its poor efficiency are factors that limit a wider application of SCNT. In this context, oocyte meiotic arrest is an important option to make SCNT more flexible and increase the number of cloned embryos produced. Herein, we show that the use of butyrolactone I in association with brain-derived neurotrophic factor (BDNF) to arrest the meiotic division for 24 h prior to in vitro maturation provides bovine (Bos indicus) oocytes capable of supporting development of blastocysts and full-term cloned calves at least as efficiently as nonarrested oocytes. Furthermore, the procedure resulted in cloned blastocysts with an 1.5- and twofold increase of POU5F1 and IFNT2 expression, respectively, which are well-known markers of embryonic viability. Mitochondrial DNA (mtDNA) copy number was diminished by prematuration in immature oocytes (718,585 +/- 34,775 vs. 595,579 +/- 31,922, respectively, control and treated groups) but was unchanged in mature oocytes (522,179 +/- 45,617 vs. 498,771 +/- 33,231) and blastocysts (816,627 +/- 40,235 vs. 765,332 +/- 51,104). To our knowledge, this is the first report of cloned offspring born to prematured oocytes, indicating that meiotic arrest could have significant implications for laboratories working with SCNT and in vitro embryo production.

Non-LTE Monte Carlo radiative transfer. II. Nonisothermal solutions for viscous Keplerian disks

We discuss the basic hydrodynamics that determines the density structure of the disks around hot stars. Observational evidence supports the idea that these disks are Keplerian (rotationally supported) gaseous disks. A popular scenario in the literature, which naturally leads to the formation of Keplerian disks, is the viscous decretion model. According to this scenario, the disks are hydrostatically supported in the vertical direction, while the radial structure is governed by the viscous transport. This suggests that the temperature is one primary factor that governs the disk density structure. In a previous study we demonstrated, using three-dimensional non-LTE Monte Carlo simulations, that viscous Keplerian disks can be highly nonisothermal. In this paper we build on our previous work and solve the full problem of the steady state nonisothermal viscous diffusion and vertical hydrostatic equilibrium. We find that the self-consistent solution departs significantly from the analytic isothermal density, with potentially large effects on the emergent spectrum. This implies that nonisothermal disk models must be used for a detailed modeling of Be star disks.

Lymphocytes transfer [(14)C]-labeled fatty acids to skeletal muscle in culture; modulation by exercise

Previous studies have shown that lipids are transferred from lymphocytes (Ly) to different cell types including macrophages. enterocytes, and pancreatic beta cells in co-culture This study investigated whether [(14)C]-labeled fatty acids (FA) can be transferred from Ly to skeletal muscle (SM), and the effects of exercise on such phenomenon Ly obtained from exercised (EX) and control (C) male Wistar rats were preloaded with the [(14)C]-labeled free FA palmitic (PA), oleic (OA), linoleic (LA), or arachidonic (AA) Radioactively loaded Ly were then co-cultured with SM from the same Ly donor animals Substantial amounts of FA were transferred to SM being the profile PA = OA > AA > LA to the C group. and PA > OA > LA > AA to the EX group These FA were incorporated predominantly as phospholipids (PA = 66 75%: OA = 63 09%, LA = 43 86%, AA - 47 40%) in the C group and (PA = 63 99% OA = 52 72%, LA = 55 99%, AA = 63 40%) in the EX group Also in this group, the remaining radioactivity from AA, LA, and OA acids was mainly incorpoiated in structural and energetic lipids These results support the hypothesis that Ly are able to export lipids to SM in co-culture Furthermore. exercise modulates the lipid transference profile, and its incorporation on SM The overall significance of this phenomenon in vivo remains to be elucidated. Copyright (C) 2010 John Wiley & Sons, Ltd

Effects of Exercise Training on Hepatic Microsomal Triglyceride Transfer Protein Content in Rats

Microsomal triglyceride transfer protein (MTP) is a protein that exerts a central regulatory role in very-low-density lipoprotein (VLDL) assembly and secretion. The purpose of the study was to investigate the effects of all exercise-training program oil hepatic content of MTP and its relation to hepatic VLDL-triglyceride (VLDL-TG) production in response to lipid infusion. Female rats either fed a standard (SD) or all obesity-induced high-fat (HF; 43% as energy) diet for 8 weeks were Subdivided into sedentary (Sed) and trained (Tr) groups. Exercise training consisted Of Continuous running on a motor-driven rodent treadmill 5 times/week for 8 weeks. At the end of this period, all rats in the fasted state were intravenously infused with a 20% Solution of intralipid for 3 h followed by all injection of Triton WR1339 to block lipoprotein lipase. An additional control grout) consisting of Sed rats fed the SD diet was infused with saline (0.9% NaCl). Plasma TG accumulation was thereafter measured during 90 min to estimate VLDL-TG production. Under HF diet, hepatic MTP content and plasma TG accumulation after Triton blockade (thus reflecting VLDL-TG synthesis and secretion) were not changed in Sed rats, whereas liver TG content was highly increased (similar to 90%; p<0.01). Oil the other hand, training reduced liver MTP protein content in both SD(-18%) and HF(-23%) fed rats(p<0.05). Plasma VLDL-TG accumulation was also lower (p<0.05) in Tr than in Sed rats fed the HF diet. This effect was not observed in SD fed rats. Furthermore, the exercise training-induced decrease in VLDL-TG production in HF rats was associated with a decrease in liver TG levels. It is Concluded that in addition to a reduction in liver TG content, exercise training reduces VLDL synthesis and/or secretion in HF fed rats probably via MTP regulation.

Transfer of antibodies across the placenta and in breast milk from mothers on intravenous immunoglobulin

We studied the levels of immunoglobulins in colostrum, milk and sera from two common variable immunodeficiency (CVID) mothers (M1 and M2), and in sera from their newborn infants. During pregnancy they continued intravenous immunoglobulin therapy (IVIG). Antibody levels from maternal and cord blood collected at delivery and colostrum and milk, collected on the 3rd and 7th post-partum days, respectively, were analyzed. Although cord/maternal blood ratios of total immunoglobulins and subclasses, as well as specific antibodies differed between M1 and M2, both showed good placental transfer of anti-protein and anti-polysaccharide antibodies, despite lower cord/maternal blood ratios in M2. Anti-Streptococcus pneumoniae antibody avidity indexes were similar between paired maternal and cord serum. Both mothers` colostrum and milk samples showed only traces of IgA, and IgM and IgG levels in colostrum were within normal range in M1, whereas M2 presented elevated IgG and low IgM levels, when compared with healthy mothers. The study of colostrum and milk activity showed that they strongly inhibited enteropathogenic Escherichia coli adhesion in vitro. CVID patients must be informed about the relevance of regular IVIG administration during pregnancy, not only for their own health but also for their immune immature offspring. Breast-feeding should be encouraged as colostra from these CVID patients strongly inhibited E. coli adhesion to human epithelial cells thus providing immunological protection plus nutritional and psychological benefits for the infant.