Increasing Utilization of US Electric Grids via Smart Technologies: Integration of Load Management, Real Time Pricing, Renewables, EVs and Smart Grid Sensors

Electric power grids throughout the world suffer from serious inefficiencies associated with under-utilization due to demand patterns, engineering design and load following approaches in use today. These grids consume much of the world’s energy and represent a large carbon footprint. From material utilization perspectives significant hardware is manufactured and installed for this infrastructure often to be used at less than 20-40% of its operational capacity for most of its lifetime. These inefficiencies lead engineers to require additional grid support and conventional generation capacity additions when renewable technologies (such as solar and wind) and electric vehicles are to be added to the utility demand/supply mix. Using actual data from the PJM [PJM 2009] the work shows that consumer load management, real time price signals, sensors and intelligent demand/supply control offer a compelling path forward to increase the efficient utilization and carbon footprint reduction of the world’s grids. Underutilization factors from many distribution companies indicate that distribution feeders are often operated at only 70-80% of their peak capacity for a few hours per year, and on average are loaded to less than 30-40% of their capability. By creating strong societal connections between consumers and energy providers technology can radically change this situation. Intelligent deployment of smart sensors, smart electric vehicles, consumer-based load management technology very high saturations of intermittent renewable energy supplies can be effectively controlled and dispatched to increase the levels of utilization of existing utility distribution, substation, transmission, and generation equipment. The strengthening of these technology, society and consumer relationships requires rapid dissemination of knowledge (real time prices, costs & benefit sharing, demand response requirements) in order to incentivize behaviors that can increase the effective use of technological equipment that represents one of the largest capital assets modern society has created.

Thrombophilia and outcomes of assisted reproduction technologies: a systematic review and meta-analysis

Thrombophilia has been associated with pregnancy complications and recurrent miscarriage. The aim of this systematic review was to evaluate the controversial association between thrombophilia and failures of assisted reproduction technology (ART). A systematic search of the literature for studies reporting on thrombophilia in women undergoing ART up to April 2011 yielded 33 studies (23 evaluating anti-phospholipid antibodies, 5 inherited thrombophilia, and 5 both) involving 6092 patients. Overall, methodologic quality of the studies was poor. Combined results from case-control studies showed that factor V Leiden was significantly more prevalent among women with ART failure compared with fertile parous women or those achieving pregnancy after ART (odds ratio = 3.08; 95% confidence interval, 1.77-5.36). The prothrombin mutation, methylenetetrahydrofolate reductase mutation, deficiency of protein S, protein C, or anti-thrombin were all not associated with ART failure. Women with ART failure tested more frequently positive for anti-phospholipids antibodies (odds ratio = 3.33; 95% confidence interval, 1.77-6.26) with evidence of high degree of between-study heterogeneity (I(2) = 75%; P < .00001). Prospective cohort studies did not show significant associations between thrombophilia and ART outcomes. Although case-control studies suggest that women experiencing ART failures are more frequently positive for factor V Leiden and anti-phospholipid antibodies, the evidence is inconclusive and not supported by cohort studies.

A research agenda for malaria eradication: basic science and enabling technologies

Today's malaria control efforts are limited by our incomplete understanding of the biology of Plasmodium and of the complex relationships between human populations and the multiple species of mosquito and parasite. Research priorities include the development of in vitro culture systems for the complete life cycle of P. falciparum and P. vivax and the development of an appropriate liver culture system to study hepatic stages. In addition, genetic technologies for the manipulation of Plasmodium need to be improved, the entire parasite metabolome needs to be characterized to identify new druggable targets, and improved information systems for monitoring the changes in epidemiology, pathology, and host-parasite-vector interactions as a result of intensified control need to be established to bridge the gap between bench, preclinical, clinical, and population-based sciences.

Advanced reconstructive technologies for periodontal tissue repair

Reconstructive therapies to promote the regeneration of lost periodontal support have been investigated through both preclinical and clinical studies. Advanced regenerative technologies using new barrier-membrane techniques, cell-growth-stimulating proteins or gene-delivery applications have entered the clinical arena. Wound-healing approaches using growth factors to target the restoration of tooth-supporting bone, periodontal ligament and cementum are shown to significantly advance the field of periodontal-regenerative medicine. Topical delivery of growth factors, such as platelet-derived growth factor, fibroblast growth factor or bone morphogenetic proteins, to periodontal wounds has demonstrated promising results. Future directions in the delivery of growth factors or other signaling models involve the development of innovative scaffolding matrices, cell therapy and gene transfer, and these issues are discussed in this paper.

Infrapopliteal lesion morphology in patients with critical limb ischemia: implications for the development of anti-restenosis technologies

Purpose : To angiographically evaluate infrapopliteal arterial lesion morphology in a consecutive series of patients presenting with critical limb ischemia (CLI) and undergoing infrapopliteal angioplasty. Methods : A prospective analysis was undertaken of a consecutive series of CLI patients undergoing endovascular therapy in a tertiary referral center in the year 2011. Morphological assessment of baseline angiograms obtained prior to revascularization included lesion length, assessment of calcification using a semi-quantitative scoring system, and reference vessel diameter (RVD) measurement. Delta RVDs were assessed subtracting distal RVDs from proximal RVDs. A total of 197 infrapopliteal lesions in 105 CLI patients (n=106 limbs) were assessed. Of these, 136 lesions were treated by endovascular means. Results : The average length of treated lesions was 87.1±43.8 mm in stenoses and 124.0±78.3 mm in chronic occlusions (p<0.001). Mean RVD proximal to the lesions was 1.88 mm whereas it was 1.66 mm distal to the lesions (p≤0.03). Mean arterial calcification was 1.15. Conclusion : This prospective angiographic series underlines the complex nature and extensive longitudinal involvement of infrapopliteal lesions in CLI patients. These findings should be taken into consideration for anti-restenosis concepts in this challenging subgroup of peripheral artery disease patients.

Systemic and pulmonary vascular dysfunction in children conceived by assisted reproductive technologies

Assisted reproductive technology (ART) involves the manipulation of early embryos at a time when they may be particularly vulnerable to external disturbances. Environmental influences during the embryonic and fetal development influence the individual's susceptibility to cardiovascular disease, raising concerns about the potential consequences of ART on the long-term health of the offspring.

Fabrication and characterization of room temperature operating single electron transistors using focused ion beam technologies

The single electron transistor (SET) is a Coulomb blockade device, whose operation is based on the controlled manipulation of individual electrons. Single electron transistors show immense potential to be used in future ultra lowpower devices, high density memory and also in high precision electrometry. Most SET devices operate at cryogenic temperatures, because the charging energy is much smaller than the thermal oscillations. The room temperature operation of these devices is possible with sub- 10nm nano-islands due to the inverse dependance of charging energy on the radius of the conducting nano-island. The fabrication of sub-10nm features with existing lithographic techniques is a technological challenge. Here we present the results for the first room temperature operating SET device fabricated using Focused Ion Beam deposition technology. The SET device, incorporates an array of tungsten nano-islands with an average diameter of 8nm. The SET devices shows clear Coulomb blockade for different gate voltages at room temperature. The charging energy of the device was calculated to be 160.0 meV; the capacitance per junction was found to be 0.94 atto F; and the tunnel resistance per junction was calculated to be 1.26 G Ω. The tunnel resistance is five orders of magnitude larger than the quantum of resistance (26 k Ω) and allows for the localization of electrons on the tungsten nano-island. The lower capacitance of the device combined with the high tunnel resistance, allows for the Coulomb blockade effects observed at room temperature. Different device configurations, minimizing the total capacitance of the device have been explored. The effect of the geometry of the nano electrodes on the device characteristics has been presented. Simulated device characteristics, based on the soliton model have been discussed. The first application of SET device as a gas sensor has been demonstrated.

Characterization of thermal and mechanical properties of polypropylene-based composites for fuel cell bipolar plates and development of educational tools in hydrogen and fuel cell technologies

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi-walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbon's Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International's FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through-plane and in-plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in-plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through-plane and in-plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single-filler formulations. For thermal conductivity, Nielsen's model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen's model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

Through the back door : Melungeon literacies and 21st century technologies

The Melungeons, a minority recognized in Southern Appalachia where they settled in the early 1800s, have mixed heritage—European, Mediterranean, Native American, and Sub-Saharan African. Their dark skin and distinctive features have marked them and been the cause of racial persecution both by custom and by law in Appalachia for two centuries. Their marginalization has led to an insider mentality, which I call a “literacy” of Melungeon-ness that affects every facet of their lives. Just a century ago, while specialized practices such as farming, preserving food, hunting, gathering, and distilling insured survival in the unforgiving mountain environment, few Melungeons could read or write. Required to pay property taxes and render military service, they were denied education, suffrage, and other legal rights. In the late 1890s visionary Melungeon leader Batey Collins invited Presbyterian homemissionaries to settle in one Tennessee Melungeon community where they established a church and built a school of unparalleled excellence. Educator-ministers Mary Rankin and Chester Leonard creatively reified the theories of Dewey, Montessori, and Rauschenbusch, but, despite their efforts, school literacy did not neutralize difference. Now, taking reading and writing for granted, Melungeons are exploring their identity by creating websites and participating in listserv discussions. These online expressions, which provide texts for rhetorical, semiotic, and socio-linguistic analysis, illustrate not solidarity but fragmentation on issues of origins and legitimacy. Armed with literacies of difference stemming from both nature and nurture, Melungeons are using literacy practices to embrace the difference they cannot escape.