Processo de planejamento estratégico em universidade pública: o caso da Universidade Federal do Pará

The goal of this research is to check if the strategic planning developed between 2001 and 2009 into the State University of Para (Universidade Federal do Pará - UFPA) was consolidated into its Academic Centers as a management practice. To this end, we identified the planning formalization degree of the Academic Centers, the conceived tools for the planning, the conception and the methodological process used in the tools elaboration, as also its implementation. The research used a qualitative approach: it is descriptive and it uses the case study technique. The data were gathered from primary and secondary sources, through bibliography, documents, and field researches through semi-structure interviews. The analysis and data interpretation were done by each investigated Academic Center from the analytics categories guided by the specifics goals. We used theoretic fundamental based principles and the university as a study empiric reference based on its structure analysis, organizational processes and institutional strategic plan. We inspected how the strategic planning process was developed throughout the fixed period and how the investigated Academic Centers are from the collected documents and interviews. The theoretical foundation was built from three axis: the Brazilian undergraduate and posgraduate education system; the university itself including its singularity and complexity as an organization; and the planning as a strategic management process. The main results show us that the UFPA has updated regulatory milestones, presenting organizational structure, laws, instructions, manuals and deployed management model that give the strategic planning development conditions beyond its administration, i. e., into its Academic Centers. The centers also present those established milestones and develop the basic planning processes of the institution. Those processes are conceived based on the institutional strategic planning and the managers mainly use the procedural orientation defined by the university management, from where the conceptual foundation is originated and propagated. According to the literature and to the research done in this work, we can conclude that the Academic Centers from the UFPA developed the strategic planning practice. This planning is organized and founded and guided the plans and decisions which avoided the disordered management and, according to the managers, allowed the advances and performance improvement. We can conclude that the UFPA built an important foundation with respect to the management professionalization. On the other hand, we can not conclude that the management practice is consolidated since there are weaknesses into the structuring of the technical teams and there is not any management tool for the implementation of the elaborated plans

Estruturas cerâmicas a base de zircônia e alumina utilizadas na confecção de infra - estruturas para coroas e pontes fixas

The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Natural fibers based composites - Technical and social issues

Brazil is the only country in South America to have an automotive supplier sector based on natural fibers. New opportunities are arising due to an increase demand by the car makers in applying natural fibers in their parts. Several crop fibers have been developed in Brazil. Among them can be listed caroa, piacava, pupunha, mutum and others of regional application. For the automotive industry, which requires large quantities with uniform quality, the alternatives are sisal (170,000 ton/yr), curaua (150 ton/yr in 2003), malva, 200 ton/yr; Brazil is the single largest producer country of sisal, and commercially, the only one in curaua. For South America, the alternatives are fique in Colombia, abaca in equator, flax in Argentina and curaua in Venezuela. It must be understood by the target countries of drugs, is that crop fiber can be an economic alternative to coca in the Andes region, therefore an instrument of land reform and drug reduction plantations. Several companies have a strong program of apply natural fibers based components in their products: Volkswagen do Brazil, DaimlerChrysler, General Motors do Brazil. Among their suppliers can be listed companies such Pematec (curaua), Toro (sisal, coir and jute), Incomer (sisal and jute), Ober (jute, curaua), Indaru (jute and sisal), Antolin (imported kenaf,) Tapetes Sao Carlos (sisal), Poematec (coir) and Art-Gore, with Woodstock'' wood and natural fibers). Figures about production and demand are discussed in the paper.

Construindo um modelo de referência ao despertar do interesse dos sujeitos em projetos educativos em ambiente on-line

This dissertation was written for the making of a model to be used as reference to the construction and diagnoses of educational projects in on-line environments. The model approaches a series of characteristics, technical and humans, which if considered can increase the potential of awake the interests to the active use of these projects for the students and build conditions to the development of an active posture by the students, fundamental factor to the educational advances. Focused in the students, not in the technology in use, we propose this model as a guide, reference to be used in a critical way in relation with every educational context. This research was made from the qualitative category, trough the method of study of case, using as reference to the analysis the use of the website guanabara.info - website outside of the school context - by it users, heard through the internet, by the use of semi-opened interview, in a data taken of the primary type. We follow as theoretical references Paulo Freire´s work, considering his vision of education and the building of knowledge as a process which occurs between man, and Celestín Freinet, in his pedagogy of humanized and critical insertion of the technologies in the school. At the end, we show the practical utilization of the model constructed using it for the diagnostics of an educational project in the on-line educational environmental moodle

A organização do dots em um distrito sanitário de Natal/RN, 2009

Tuberculosis is an ancient disease that remains a serious problem of Public Health, requiring a pressing attention. Advances in the knowledge and technology available to control it has not been sufficient to significantly impact on morbidity and mortality, especially in developing countries. To enable patient compliance with TB treatment, preventing the abandonment of this to ensure the correct use of medicines has been suggested the DOTS (Directly Observed Treatment - Short course) or directly Observable Short Course Treatment. This study focuses on the incorporation of two technical components of the DOTS strategy at the Family Health, namely, active search for respiratoy symptoms and Supervisioned Treatment (ST). The West Sanitary District was considered best suited to be the focus of study because it is assumed that those sites that were better structured would provide better information about the situation of the strategy in the municipality. Its purpose is to analyze the organization of DOTS as the active search for respiratory symptoms and Directly Observed Therapy in Health Teams Family belonging to a Health District in the city of Natal, Brazil. An exploratory descriptive study with a quantitative approach which involved health professionals from 11 units of Family Health, West Sanitary District, Natal, Rio Grande do Norte. We interviewed 62 professionals on the professional category, their involvement in the DOTS strategy, managers' contributions to the sustainability of the strategy, actions Search for symptomatic diagnosis and supervised treatment of TB cases and difficulties and facilities for the sustainability of the DOTS strategy. It is concluded that the actions taken by the professionals of the FHS West Health District are organized in more supervised treatment, a fact noted in their perceptions about DOTS