Comparação das técnicas semi-quantitativa e quantitativa nas infecções relacionadas a cateter em neonatos e determinação da resistência à oxacilina nos Staphylococcus spp

Study the semi-quantitative and quantitative technique in the diagnosis of catheter-related infections in newborns and to determine oxacillin resistance in Staphylococcus isolated. It was analyzed 353 catheter tips from 273 newborns in the Neonatal Unit of Hospital FMB. To confirm the diagnosis of infection, were analyzed the clinical data of newborns, the presence of at least one positive blood culture and growth of ≥ 1000 CFU/mL on quantitative culture and/or ³15 UFC on semiquantitative culture, with the same microorganism isolation (species and drug sensitivity) in blood culture and no other focus of infection except the catheter. The disk diffusion technique was used to check similarity of strains and resistance to oxacillin. Of the 353 tips analyzed, 39 were included in this study as the inclusion criteria. The semiquantitative culture was positive in 26 (66.7%) catheters and quantitative culture was positive in 24 (61.5%). Of 273 patients, 19 (6.9%) had a diagnosis of catheter-related bloodstream Infection (CR-BSI). Of the 19 episodes of CR-BSI, S. epidermidis was the predominant etiological agent (84.2%). The resistance to the antibiotic methicillin was found in 14 (73.7%) strains of Staphylococcus. The semiquantitative method was more sensitive (79%) compared with the quantitative method (63%). The use of antibiotics may have influenced the sensitivity of the quantitative method as the microorganisms present in the lumen are exposed to higher concentrations of antibiotics administered via the catheter

Diagnóstico ambiental da área de influência do distrito industrial de Rio Claro - SP

Economic activities, whether large or small, can cause a range of environmental changes, not always reversible, harming society and its quality of life. Many potentially polluting activities have already been installed in various Brazilian cities, just as at the industrial district of Rio Claro / SP, which allow the synthesis of the many environmental impacts. In this sense, this report aims to make an environmental assessment in the influence area of the industrial district of Rio Claro / SP, located in the urban area of the city. As a result, the existence of prior related studies was observed, especially the diagnosis and study of the many implications that arises from activities impacting, and further, there was a demarcation of the influence area of the district and its derivatives impacts in the influence area, the steps of prediction and mitigation measures and if these activities meet the minimum technical requirements in planning and environmental applicable legislation.

Planejamento ambiental da Bacia Hidrográfica do Córrego da Olga, UGRHI Pontal do Paranapanema – São Paulo: inventário e diagnóstico

This work, presented in order to obtain the environmental engeneer title, is to raise the current status of environmental conditions in the watershed of the stream of Olga and thus contribute to environmental planning for the recovery, conservation and preservation. To this end, we conducted literature surveys and survey of the characteristics of the watershed, analysis of water fron stream of Olga and making use of remote sensingand of the soil, environmental fragiityand spatialization of APPs in order to carry out further research on the environmental conditions of the basin, as well as inferences about possible causes of degradation of watershed.Most of the basin of the stream Olga had a high environmental fargility and the main problem was the lack of riparian vegetation is also considered the cause of environmental problems of the watershed.The results will be available to municipal governments in order to contribute to their planning and management of UGRHI the teh watershed pertence

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate

Técnicas de geotecnologia na avaliação na área erodida na Bacia Hidrográfica Dois Córregos, Selviria-MS

Pós-graduação em Agronomia - FEIS

Desenvolvimento de imunossensor baseado na imobilização de anticorpo monoclonal em fibroína da seda para diagnóstico rápido da cisticercose bovina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Padronização do teste dot blotting e comparação entre testes de diagnóstico de brucelose em bovinos

Pós-graduação em Medicina Veterinária - FCAV

Produção otimizada de biocelulose utilização de biologia molecular de micro-organismos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Técnicas de caracterização microestrutural, por microscopia óptica e microscopia eletrônica de varredura, de aços bifásicos e multifásicos aplicados à indústria automobilística

This project developed microstructural characterization technics of commercial dualphase and multi-phasic (TRIP) steels that were provided by the automotive industry and are currently used as the raw material for the production of automobiles. Inserted in this context, there is the development of the advanced high strength steels in consonance with the ULSABAVC project, which aims the production of safe, economically viable and efficient in terms of fuel consumption vehicles for the 21st century. The micro-structural characterization of biphasic and multiphase steels was done by the identification and quantification of the coexistent phases. In this item, a special attention was given to the technics that were performed using optic microscopy and scanning electron microscopy. An important contribution to this work was the utilization of different alternative chemical reagents (Beraha, Heat-Tinting technics) in addition to the classical ones (Nital and LePera)already used conventionally by the UNESP's Group of Mechanical, Microstructural and Fractografic Characterization of Materials. The revealed microstructures were correlated with the materials' mechanical properties determined through traction tests, such as ultimate tensile strengths, yield strength and stretching important since the material has structural application in the automotive industry. As a result, it was observed the superiority concerning the studied mechanical properties for the biphasic and multiphasic steels when compared to the conventional carbon steels. Besides, it was perceived a large potential for the industrial scale utilization of the Heat Tinting technics in this field, seen its differentiation of the existent phases and easy reproducibility

Utilização de alambique de aço inoxidável na produção de aguardente de líquor de laranja: efeito na formação de carbamato de etila

O Brasil é reconhecido mundialmente como o maior produtor e exportador de suco de laranja do mundo. O líquor de laranja é um dos principais subprodutos da indústria cítrica, rico em açúcares e destinado, quase que exclusivamente para a produção de ração animal, já que seu descarte certamente causaria problemas ambientais. Com o intuito de ter um melhor aproveitamento deste subproduto, foi desenvolvido um novo tipo de destilado obtido a partir da fermentação do líquor de laranja. Dado o enorme volume de líquor e considerando-se também o enorme volume de fermento de descarte da indústria cervejeira (160 milhões de litros/ano) ainda viável, está sendo objeto de estudo a utilização deste fermento na obtenção da aguardente de líquor de laranja. Nesse sentido, foram obtidas amostras de aguardente de líquor de laranja, utilizando-se de técnicas tradicionais de produção de cachaça, sendo o líquor fermentado de fermento que é descarte da indústria cervejeira. Dessa forma, foram avaliados a viabilidade da levedura de descarte da indústria cervejeira, o teor de sólidos solúveis, o teor de cobre e carbamato de etila na aguardente de líquor de laranja obtida utilizando alambique de aço inoxidável.

Avaliação do uso de técnicas digitais para caracterização de área degradada por empréstimo de solo: máxima verossimilhança x modelo linear de mistura espectral

Pós-graduação em Engenharia Civil - FEIS

Diagnóstico da qualidade da água da microbacia do Córrego da Aldeia em Fernandópolis-SP

Pós-graduação em Engenharia Civil - FEIS

Desenvolvimento de biossensores capacitivos constituídos de monocamadas peptídicas nanometricamente estruturadas

Pós-graduação em Biotecnologia - IQ

Diagnóstico do nível de maturidade do processo de desenvolvimento de produtos: um estudo de caso em empresa calçadista

The process of product development (PPD) is a strategic factor in which companies seek to identify consumer needs. The relationship of the practices adopted, tools, techniques, among others, can determinate the maturity level of the company in this process. The purpose of this paper is to understand and diagnose the level of maturity of the PDP in footwear segment industry. For the case study, a company inserted into one of the largest poles of women’s footwear in Brazil, located in Jaú, São Paulo State, was researched. The diagnosis is based on the maturity levels of the unified model, reference in the process of product development, proposed by Rozenfeld et al. (2006). The application of the model assisted to diagnose the current maturity level of the company in this process, providing useful information to achieve higher levels of maturity in the PDP.

Tecido ósseo homólogo para utilização em odontologia

The use of bone grafts from bone tissue banks, also known as bone allografts, has increased in the last years, although most of its users still have concerns on resources and processing protocols. The objective of this paper was to make a literature review about the use of bone allografts in Dentistry, and also about the legal considerations regarding this biomaterial. Studies regarding the donor selection, the cross-infection risks and processing protocols of this biomaterial are still rare but essential, and allied to those regarding its clinical application, can base its use.