Audit report on the Crawford County Area Solid Waste Agency Commission for the year ended June 30, 2011

Audit report on the Crawford County Area Solid Waste Agency Commission for the year ended June 30, 2011

INTERNAL STRUCTURE OF A VERMICULAR IRONSTONE AS DETERMINED BY X-RAY COMPUTED TOMOGRAPHY SCANNING

Ironstones or petroplinthites are common materials in soils under humid tropical climate, generally defined as the result of Fe oxide accumulation in areas where the water table oscillates, and may exhibit considerable morphological variability. The aim of this study was to examine the internal structure and porosity of an ironstone fragment from a Petroferric Acrudox in Minas Gerais, Brazil, by computed tomography (CT) and conventional techniques. The sample analyzed had total porosity of 59.5 %, with large macropores in the form of tubular channels and irregular vughs, the latter with variable degrees of infilling by material released from the ironstone walls or the soil matrix. The CT scan also showed that the ironstone has wide variation in the density of the solid phase, most likely due to higher concentrations or thick intergrowths of hematite and magnetite/maghemite, especially in its outer rims. The implications of these results for water retention and soil formation in ironstone environments are briefly discussed.

Task 6: Material Thermal Input for Iowa Materials, May 2008

The present research project was designed to determine thermal properties, such as coefficient of thermal expansion (CTE) and thermal conductivity, of Iowa concrete pavement materials. These properties are required as input values by the Mechanistic-Empirical Pavement Design Guide (MEPDG). In this project, a literature review was conducted to determine the factors that affect thermal properties of concrete and the existing prediction equations for CTE and thermal conductivity of concrete. CTE tests were performed on various lab and field samples of portland cement concrete (PCC) at the Iowa Department of Transportation and Iowa State University. The variations due to the test procedure, the equipment used, and the consistency of field batch materials were evaluated. The test results showed that the CTE variations due to test procedure and batch consistency were less than 5%, and the variation due to the different equipment was less than 15%. Concrete CTE values were significantly affected by different types of coarse aggregate. The CTE values of Iowa concrete made with limestone+graval, quartzite, dolomite, limestone+dolomite, and limestone were 7.27, 6.86, 6.68, 5.83, and 5.69 microstrain/oF (13.08, 12.35, 12.03, 10.50, and 10.25 microstrain/oC), respectively, which were all higher than the default value of 5.50 microstrain/oF in the MEPDG program. The thermal conductivity of a typical Iowa PCC mix and an asphalt cement concrete (ACC) mix (both with limestone as coarse aggregate) were tested at Concrete Technology Laboratory in Skokie, Illinois. The thermal conductivity was 0.77 Btu/hr•ft•oF (1.33 W/m•K) for PCC and 1.21 Btu/hr•ft•oF (2.09 W/m•K) for ACC, which are different from the default values (1.25 Btu/hr•ft•oF or 2.16 W/m•K for PCC and 0.67 Btu/hr•ft•oF or 1.16 W/m•K for ACC) in the MEPDG program. The investigations onto the CTE of ACC and the effects of concrete materials (such as cementitious material and aggregate types) and mix proportions on concrete thermal conductivity are recommended to be considered in future studies.

Material Thermal Inputs of Iowa Materials for MEPDG, 2011

The thermal properties of concrete materials, such as coeffi cient of thermal expansion (CTE), thermal conductivity, and heat capacity, are required by the MEPDG program as the material inputs for pavement design. However, a limited amount of test data is available on the thermal properties of concrete in Iowa. The default values provided by the MEPDG program may not be suitable for Iowa concrete, since aggregate characteristics have signifi cant infl uence on concrete thermal properties.

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2012

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2012

Audit report on the Hamilton County Solid Waste Commission for the year ended June 30, 2011

Audit report on the Hamilton County Solid Waste Commission for the year ended June 30, 2011

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2012

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2012

Synthesis of triheptanoin and formulation as a solid diet for rodents

Triheptanoin-enriched diets have been successfully used in the experimental treatment of various metabolic disorders. Maximal therapeutic effect is achieved in the context of a ketogenic diet where triheptanoin oil provides 3040% of the daily caloric intake. However, pre-clinical studies using triheptanoin-rich diets are hindered by the difficulty of administering to laboratory animals as a solid foodstuff. In the present study, we successfully synthesized triheptanoin to the highest standards of purity from glycerol and heptanoic acid, using sulfonated charcoal as a catalyst. Triheptanoin oil was then formulated as a solid, stable and palatable preparation using a ketogenic base and a combination of four commercially available formulation agents: hydrophilic fumed silica, hydrophobic fumed silica, microcrystalline cellulose, and talc. Diet compliance and safety was tested on C57Bl/6 mice over a 15-week period, comparing overall status and body weight change. Practical applications: This work provides a complete description of (i) an efficient and cost-effective synthesis of triheptanoin and (ii) its formulation as a solid, stable, and palatable ketogenic diet (triheptanoin-rich; 39% of the caloric intake) for rodents. Triheptanoin-rich diets will be helpful on pre-clinical experiments testing the therapeutic efficacy of triheptanoin in different rodent models of human diseases. In addition, using the same solidification procedure, other oils could be incorporated into rodent ketogenic diet to study their dosage and long-term effects on mammal health and development. This approach could be extremely valuable as ketogenic diet is widely used clinically for epilepsy treatment.

Factors influencing privatization of urban solid waste collection: some evidence from Spain

In this paper we analyse some of the organisational aspects of the urban solid waste collection and, in particular, the privatization modality of contracting out. We start by discussing some of the theoretical aspects of contracting out. We then specify and estimate an explanatory model on a sample of municipalities that we surveyed. Our purpose is twofold: on the one hand, we identify the economic factors at work when deciding to contract out the service and, on the other hand, we analyse the role of ideological factors in choosing between the public production of the service or contracting it out. The results show a significant effect of the demand for waste collection on contracting out. There also appears to be a neighbouring effect as the municipalities close to other cities that contract out are also more prone to do so. Finally, the decisions to contract seem to have been motivated by pragmatic rather than ideological reasons.

Infectious Disease Burden after Solid Organ Transplantation (SOT) in the Swiss Transplant Cohort Study (STCS).

Infectious diseases (ID) are a major cause of morbidity and mortality after SOT. Since May 2008, the STCS has registered 95% of all SOT recipients in Switzerland. The extensive data set includes pre- and post-transplant variables that are prospectively collected at transplantation, 6 months post-transplant, and yearly thereafter. All ID events are recorded using internationally validated defi nitions. We obtained data from 1101 patients (79 heart, 685 kidney, 29 kidney-pancreas, 212 liver, and 96 lung transplants). So far the median observation times were 0.8 (IQR 0.3-1.4; heart); 1.1 (0.6-1.8, kidney); 1.1 (0.6-1.9, kidney-pancreas); 1.0 (0.5-1.7, liver); and 0.9 years (0.5-1.5, lung). The highest rates of proven or probable ID events were seen in lung (76%), followed by liver (64%), heart (62%), kidney-pancreas (62%), kidney (58%). During the observation period, ID was the cause of death in 19 patients (1.7%). Rates of infections per person-years according to pathogen and type of transplantation are shown in Figure 1. The data indicate that virus infections are only second after bacteria whereas fungi occur at relatively low rates. This prospective and standardized long-term collection of all ID events will allow a comprehensive assessment of the burden of ID across all SOT types in Switzerland. Regular analysis will identify new trends, serve as a quality control and help design anti-infectious interventions aiming at increasing safety and improving overall transplantation outcome.

Solid-phase synthesis and DNA binding studies of dichloroplatinum(II) conjugates of dicarba analogues of octreotide as a new anticancer drugs

The first dichloroplatinum(II) conjugates of dicarba analogues of octreotide , which is expected to act as a"tumour-targeting device", have been efficiently synthesized following a stepwise solid-phase approach; these compounds emulate the mechanism of cisplatin since they form a 1,2-intrastrand cross-link with two consecutive guanines of an oligonucleotide.

Audit report on the Butler County Solid Waste Commission for the year ended June 30, 2012

Audit report on the Butler County Solid Waste Commission for the year ended June 30, 2012

Audit report on the Pocahontas County Solid Waste Commission for the year ended June 30, 2012

Audit report on the Pocahontas County Solid Waste Commission for the year ended June 30, 2012

Audit report on the Wayne-Ringgold-Decatur County Solid Waste Management Commission for the year ended June 30, 2012

Audit report on the Wayne-Ringgold-Decatur County Solid Waste Management Commission for the year ended June 30, 2012