Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Potencialidad de la modelización state-space y el filtro de Kalman para el anàlisis regional : una aplicación para el índice de actividad industrial

El déficit existente a nuestro país con respecto a la disponibilidad de indicadores cuantitativos con los que llevar a término un análisis coyuntural de la actividad industrial regional ha abierto un debate centrado en el estudio de cuál es la metodología más adecuada para elaborar indicadores de estas características. Dentro de este marco, en este trabajo se presentan las principales conclusiones obtenidas en anteriores estudios (Clar, et. al., 1997a, 1997b y 1998) sobre la idoneidad de extender las metodologías que actualmente se están aplicando a las regiones españolas para elaborar indicadores de la actividad industrial mediante métodos indirectos. Estas conclusiones llevan a plantear una estrategia distinta a las que actualmente se vienen aplicando. En concreto, se propone (siguiendo a Israilevich y Kuttner, 1993) un modelo de variables latentes para estimar el indicador de la producción industrial regional. Este tipo de modelo puede especificarse en términos de un modelo statespace y estimarse mediante el filtro de Kalman. Para validar la metodología propuesta se estiman unos indicadores de acuerdo con ella para tres de las cuatro regiones españolas que disponen d¿un Índice de Producción Industrial (IPI) elaborado mediante el método directo (Andalucía, Asturias y el País Vasco) y se comparan con los IPIs publicados (oficiales). Los resultados obtenidos muestran el buen comportamiento de l¿estrategia propuesta, abriendo así una línea de trabajo con la que subsanar el déficit al que se hacía referencia anteriormente

Algunes reflexions sobre la construcció d'indicadors indirectes pel seguiment de l'activitat industrial regional

En un gran nombre d'economies, l'evolució de la producció industrial s'analitza a partir de la informació sobre el Producte Industrial Brut i/o el Valor Afegit Brut que proporcionen les Comptabilitats Nacionals. A Espanya, la utilització d'aquestes dades presenta el problema que no estan disponibles tan ràpidament com seria desitjable. En conseqüència, no és possible realitzar un seguiment a curt termini de l'activitat industrial a partir dels mateixos. Per a solucionar aquest problema, l'Institut Nacional d'Estadística elabora un Índex de Producció Industrial mensual a partir de la informació obtinguda a través d'una enquesta dirigida a una mostra representativa de les empreses espanyoles. No obstant això, a nivell regional, les dificultats per a realitzar un seguiment de l'activitat industrial són majors a causa de l'escassesa d'informació estadística. Durant els últims anys, diferents institucions públiques i privades han començat a elaborar indicadors d'activitat per a algunes regions espanyoles, encara que a partir de metodologies no homogènies, de manera que aquests índexs no són directament comparables. Per a corregir aquesta situació, en diferents fòrums s'ha proposat emprar la metodologia utilitzada per l'Institut d'Estadística de Catalunya (IEC) per a la comunitat catalana com alternativa per a aquelles comunitats espanyoles que no disposen d'un indicador de l'activitat industrial, atès que per a Catalunya resulta una metodologia adequada. En aquest treball s'estudia la idoneïtat d'estendre aquesta metodologia a la resta de regions espanyoles. Per a això, es construeixen uns indicadors d'acord amb la metodologia del IEC i es comparen amb els índexs regionals obtinguts per mètodes directes per a tres de les quatre regions que existeixen: Andalusia, Astúries i Euskadi

Exopolysaccharides produced by the symbiotic nitrogen-fixing bacteria of leguminosae

The process of biological nitrogen fixation (BNF), performed by symbiotic nitrogen fixing bacteria with legume species, commonly known as α and β rhizobia, provides high sustainability for the ecosystems. Its management as a biotechnology is well succeeded for improving crop yields. A remarkable example of this success is the inoculation of Brazilian soybeans with Bradyrhizobium strains. Rhizobia produce a wide diversity of chemical structures of exopolysaccharides (EPS). Although the role of EPS is relatively well studied in the process of BNF, their economic and environmental potential is not yet explored. These EPS are mostly species-specific heteropolysaccharides, which can vary according to the composition of sugars, their linkages in a single subunit, the repeating unit size and the degree of polymerization. Studies have showed that the EPS produced by rhizobia play an important role in the invasion process, infection threads formation, bacteroid and nodule development and plant defense response. These EPS also confer protection to these bacteria when exposed to environmental stresses. In general, strains of rhizobia that produce greater amounts of EPS are more tolerant to adverse conditions when compared with strains that produce less. Moreover, it is known that the EPS produced by microorganisms are widely used in various industrial activities. These compounds, also called biopolymers, provide a valid alternative for the commonly used in food industry through the development of products with identical properties or with better rheological characteristics, which can be used for new applications. The microbial EPS are also able to increase the adhesion of soil particles favoring the mechanical stability of aggregates, increasing levels of water retention and air flows in this environment. Due to the importance of EPS, in this review we discuss the role of these compounds in the process of BNF, in the adaptation of rhizobia to environmental stresses and in the process of soil aggregation. The possible applications of these biopolymers in industry are also discussed.

Industrial-economic survey of Clinton, Iowa, and the surrounding area,1960.

This is an "Industrial-Economic Survey" of Clinton, Iowa and the surrounding area that was compiled and assembled for the use of any manufacturing of commercial organization which has in interest in setting up operations in the general Clinton area. Facts and statistics are shown to use for location analysis. Numerous photos and maps are included.

Modelling non-industrial private forest landowners' strategic decision making by using logistic regression and neural networks: case of predicting the choice of forest taxation basis

Summary

Iowa Commercial and Industrial Network, January 1, 2011

Map produced by Iowa Department of Transportation about Iowa Commercial and Industrial Network.

Chemical properties of soils treated with biological sludge from gelatin industry

The impact of agro-industrial organic wastes in the environment can be reduced when used in agriculture. From the standpoint of soil fertility, residue applications can increase the organic matter content and provide nutrients for plants. This study evaluated the effect of biological sludge from gelatin industry on the chemical properties of two Ultisols (loamy sand and sandy clay) and an Oxisol (clay). The experiment lasted 120 days and was carried out in laboratory in a completely randomized design with factorial arrangement, combining the three soils and six biological sludge rates (0, 100, 200, 300, 400, and 500 m³ ha-1), with three replications. Biological sludge rates of up to 500 m³ ha-1 decreased soil acidity and increased the effective cation exchange capacity (CEC) and N, Ca, Mg, and P availability, without exceeding the tolerance limit for Na. The increase in exchangeable base content, greater than the effective CEC, indicates that the major part of cations added by the sludge remains in solution and can be lost by leaching.

Organic matter quality and dynamics in tropical soils amended with sugar industry residue

Soil organic matter depletion caused by agricultural management systems have been identified as a critical problem in most tropical soils. The application of organic residues from agro-industrial activities can ameliorate this problem by increasing soil organic matter quality and quantity. Humic substances play an important role in soil conservation but the dynamics of their transformations is still poorly understood. This study evaluated the effect of compost application to two contrasting tropical soils (Inceptisol and Oxisol) for two years. Soil samples were incubated with compost consisting of sugarcane filter cake, a residue from the sugar industry, at 0, 40, 80, and 120 Mg ha-1. Filter cake compost changed the humic matter dynamics in both content and quality, affecting the soil mineralogical composition. It was observed that carbon mineralization was faster in the illite-containing Inceptisol, whereas humic acids were preserved for a longer period in the Oxisol. In both soils, compost application increased fulvic acid contents, favoring the formation of small hydrophilic molecules. A decrease in fluorescence intensity according to the incubation time was observed in the humic acids extracted from amended soils, revealing important chemical changes in this otherwise stable C pool.

Use of steel slag to neutralize acid mine drainage (AMD) in sulfidic material from a uranium mine

Acid Mine Drainage (AMD) is one of the main environmental impacts caused by mining. Thus, innovative mitigation strategies should be exploited, to neutralize acidity and prevent mobilization of trace elements in AMD. The use of industrial byproducts has been considered an economically and environmentally effective alternative to remediate acid mine drainage. Therefore, the objective of this study was to evaluate the use of steel slag to mitigate acid mine drainage in a sulfidic material from a uranium mine, as an alternative to the use of limestone. Thus, increasing doses of two neutralizing agents were applied to a sulfidic material from the uranium mine Osamu Utsumi in Caldas, Minas Gerais State. A steel slag from the company ArcelorMittal Tubarão and a commercial limestone were used as neutralizing agents. The experiment was conducted in leaching columns, arranged in a completely randomized, [(2 x 3) + 1] factorial design, consisting of two neutralizing agents, three doses and one control, in three replications, totaling 21 experimental units. Electrical conductivity (EC), pH and the concentrations of Al, As, Ca, Cd, Cu, Fe, Mn, Ni, S, Se, and Zn were evaluated in the leached solutions. The trace element concentration was evaluated by ICP-OES. Furthermore, the CO2 emission was measured at the top of the leaching columns by capturing in NaOH solution and titration with HCl, in the presence of BaCl2. An increase in the pH of the leachate was observed for both neutralizing agents, with slightly higher values for steel slag. The EC was lower at the higher lime dose at an early stage of the experiment, and CO2 emission was greater with the use of limestone compared to steel slag. A decrease in trace element mobilization in the presence of both neutralizing agents was also observed. Therefore, the results showed that the use of steel slag is a suitable alternative to mitigate AMD, with the advantage of reducing CO2 emissions to the atmosphere compared to limestone.

Mineralização do carbono e nitrogênio de resíduos aplicados ao solo em campo

A definição das doses de aplicação de resíduos orgânicos de origens agrícola, urbana ou industrial, com vistas a seu aproveitamento agrícola, deve estar fundamentada na taxa de sua mineralização no solo. Neste trabalho, os objetivos foram utilizar e analisar diferentes métodos de estimativa das frações mineralizadas dos estercos de bovinos, suínos e galinhas, bem como do lodo de esgoto e do composto de lixo urbano, em campo, quando incorporados ou dispostos sobre um Latossolo Vermelho-Amarelo distrófico (LVAd). O experimento foi conduzido por um período de 360 dias, sendo feita coleta mensal de amostras do solo/resíduo, em que foram quantificadas as concentrações de carbono facilmente oxidável (COfo), o nitrogênio total, o amônio e o nitrato, possibilitando a estimativa do nitrogênio orgânico (NO). Verificou-se que estimativas das frações mineralizadas em resíduos dispostos superficialmente estão mais sujeitas a erros que as incorporadas, em razão das diferentes proporções resíduo/solo coletadas durante o período de monitoramento. Recomendou-se a obtenção das frações mineralizadas a partir de dados de concentração de COfo no solo/resíduo, tendo em vista que as de Ninorg e, consequentemente, de NO estão sujeitas à forte influência da ocorrência de chuvas, gerando valores pouco confiáveis. As frações mineralizadas de COfo e NO estimadas, considerando-se as adições de material orgânico (COfo(adic) ou NO(adic)), foram, após 120 dias de incubação do resíduo, superiores a 89,3 %, sejam nos resíduos incorporados ou dispostos superficialmente.

Least limiting water range in assessing compaction in a Brazilian Cerrado latosol growing sugarcane

In the south-central region of Brazil, there is a trend toward reducing the sugarcane inter-harvest period and increasing traffic of heavy harvesting machinery on soil with high water content, which may intensify the compaction process. In this study, we assessed the structural changes of a distroferric Red Latosol (Oxisol) by monitoring soil water content as a function of the Least Limiting Water Range (LLWR) and quantified its effects on the crop yield and industrial quality of the first ratoon crop of sugarcane cultivars with different maturation cycles. Three cultivars (RB 83-5054, RB 84-5210 and RB 86-7515) were subjected to four levels of soil compaction brought about by a differing number of passes of a farm tractor (T0 = soil not trafficked, T2 = 2 passes, T10 = 10 passes, and T20 = 20 passes of the tractor in the same place) in a 3 × 4 factorial arrangement with three replications. The deleterious effects on the soil structure from the farm machinery traffic were limited to the surface layer (0-10 cm) of the inter-row area of the ratoon crop. The LLWR dropped to nearly zero after 20 tractor passes between the cane rows. We detected differences among the cultivars studied; cultivar RB 86-7515 stood out for its industrial processing quality, regardless of the level of soil compaction. Monitoring of soil moisture in the crop showed exposure to water stress conditions, although soil compaction did not affect the production variables of the sugarcane cultivars. We thus conclude that the absence of traffic on the plant row maintained suitable soil conditions for plant development and may have offset the harmful effects of soil compaction shown by the high values for bulk density between the rows of the sugarcane cultivars.

Valores de referência de qualidade para metais pesados em solos do Rio Grande do Norte

O crescimento industrial e o populacional têm aumentado os teores de metais pesados nos solos e impactado a qualidade desse recurso. Nesse contexto, as agências de proteção ambiental vêm despendendo esforços para o estabelecimento de índices que possam identificar áreas suspeitas de contaminação. Valores de Referência de Qualidade para Solos (VRQs) refletem a concentração natural de determinada substância no solo, sem interferência antrópica. O trabalho objetivou estabelecer os VRQs para os metais Ag, Ba, Cd, Co, Cr, Cu, Ni, Pb, Sb, V e Zn exigidos pelo Conama, para composição da legislação direcionada ao monitoramento desses elementos nos solos do Estado do Rio Grande do Norte. Foram coletadas 416 amostras de solo em áreas de mata nativa ou com mínima influência antrópica. A abertura das amostras foi efetuada pelo método EPA-3051A, sendo os metais determinados por espectrometria de emissão ótica (ICP-OES) e absorção atômica (AA). Os resultados do trabalho comprovaram que estudos regionalizados são essenciais para definição de VRQs. Os VRQs calculados para o Rio Grande do Norte foram mais restritivos que os de outros estados do país. A análise fatorial de confirmação dos dados foi útil para obtenção de VRQs mais confiáveis e demonstrou que para o Estado esses valores podem ser estabelecidos com apenas duas repetições por local de coleta. Nesse sentido, é primordial um planejamento prévio, de distribuição dos locais de amostragem, de maneira que os diversos compartimentos geomorfológicos, pedológicos e geológicos do Estado sejam representados.