Direct numerical simulation of hypersonic boundary layer transition over a blunt cone with a small angle of attack

The direct numerical simulation of boundary layer transition over a 5° half-cone-angle blunt cone is performed. The free-stream Mach number is 6 and the angle of attack is 1°. Random wall blow-and-suction perturbations are used to trigger the transition. Different from the authors’ previous work [Li et al., AIAA J. 46, 2899(2008)], the whole boundary layer flow over the cone is simulated (while in the author’s previous work, only two 45° regions around the leeward and the windward sections are simulated). The transition location on the cone surface is determined through the rapid increase in skin fraction coefficient (Cf). The transition line on the cone surface shows a nonmonotonic curve and the transition is delayed in the range of 0° ≤ θ ≤ 30° (θ = 0° is the leeward section). The mechanism of the delayed transition is studied by using joint frequency spectrum analysis and linear stability theory (LST). It is shown that the growth rates of unstable waves of the second mode are suppressed in the range of 20° ≤ θ ≤ 30°, which leads to the delayed transition location. Very low frequency waves VLFWs� are found in the time series recorded just before the transition location, and the periodic times of VLFWs are about one order larger than those of ordinary Mack second mode waves. Band-pass filter is used to analyze the low frequency waves, and they are deemed as the effect of large scale nonlinear perturbations triggered by LST waves when they are strong enough.The direct numerical simulation of boundary layer transition over a 5° half-cone-angle blunt cone is performed. The free-stream Mach number is 6 and the angle of attack is 1°. Random wall blow-and-suction perturbations are used to trigger the transition. Different from the authors’ previous work [ Li et al., AIAA J. 46, 2899 (2008) ], the whole boundary layer flow over the cone is simulated (while in the author’s previous work, only two 45° regions around the leeward and the windward sections are simulated). The transition location on the cone surface is determined through the rapid increase in skin fraction coefficient (Cf). The transition line on the cone surface shows a nonmonotonic curve and the transition is delayed in the range of 20° ≤ θ ≤ 30° (θ = 0° is the leeward section). The mechanism of the delayed transition is studied by using joint frequency spectrum analysis and linear stability theory (LST). It is shown that the growth rates of unstable waves of the second mode are suppressed in the range of 20° ≤ θ ≤ 30°, which leads to the delayed transition location. Very low frequency waves (VLFWs) are found in the time series recorded just before the transition location, and the periodic times of VLFWs are about one order larger than those of ordinary Mack second mode waves. Band-pass filter is used to analyze the low frequency waves, and they are deemed as the effect of large scale nonlinear perturbations triggered by LST waves when they are strong enough.

The contribution of fish intake, aquaculture, and small-scale fisheries to improving nutrition security: a literature review

Much of fish consumed by the poor are caught by household members and traded in local markets. These fish are rarely or poorly included in national statistics, and it is therefore difficult to estimate precisely the real contribution of fish to the rural poor households. This report is the first global overview of the role played by fish in improving nutrition. Fish consumption patterns of the poor, the nutritional value of fish, and small-scale fisheries and aquaculture activities are considered. It also highlights the gap in knowledge where more research is needed.

Two-Phase Flow In Anode Flow Field Of A Small Direct Methanol Fuel Cell In Different Gravities

An in-situ visualization of two-phase flow inside anode flow bed of a small liquid fed direct methanol fuel cells in normal and reduced gravity has been conducted in a drop tower. The anode flow bed consists of 11 parallel straight channels. The length, width and depth of single channel, which had rectangular cross section, are 48.0, 2.5 and 2.0 mm, respectively. The rib width was 2.0 mm. The experimental results indicated that when the fuel cell orientation is vertical, two-phase flow pattern in anode channels can evolve from bubbly flow in normal gravity into slug flow in microgravity. The size of bubbles in the reduced gravity is also bigger. In microgravity, the bubbles rising speed in vertical channels is obviously slower than that in normal gravity. When the fuel cell orientation is horizontal, the slug flow in the reduced gravity has almost the same characteristic with that in normal gravity. It implies that the effect of gravity on two-phase flow is small and the bubbles removal is governed by viscous drag. When the gas slugs or gas columns occupy channels, the performance of liquid fed direct methanol fuel cells is failing rapidly. It infers that in long-term microgravity, flow bed and operating condition should be optimized to avoid concentration polarization of fuel cells.

Strategies for meeting the fishing input requirements of small scale artisanal fisheries

An examination is made of the socio-economic factors associated with the failure of existing approaches to the fishing input requirements of small-scale fisheries in Nigeria. The fishermen and secretaries of the fishermen cooperative societies in three major settlements (Uta-Ewa, Okoroete and Iko) were selected for interviews. The survey showed that the idealogy of the fishermen of the role of cooperative society is wrong and specific programmes need to be directed towards correcting this perception. Thus, for any meaningful support programme for the artisanal small-scale fishermen, the perception of the fishermen about the cooperative organization must first be aligned rightly. It is suggested that the fishing input be determined by type and specification as a preliminary step in the delivery of inputs to the fishermen. Social, economic and cultural variabilities should be related to the requirement by the fishermen. The price level of fishermen will determine the direction and level of government support required

Aquaculture Asia, Vol.14, No.3, pp.1-44, July-September 2009

Sustainable aquaculture Contrasting community management and revenue sharing practices of culture-based fisheries in Lao PDR Saphakdy, B., Phomsouvanh, A., Davy, B., Nguyen, T.T.T. and De Silva, S.S.; Floodplain aquaculture in Begumgonj: New horizon for rural livelihoods in Bangladesh Hossain, M. S.; Promoting small-scale inland aquaculture in Papua New Guinea Edwards, P.; Group approach to shrimp farming: The key to sustainability Kumaran, M.; Research and farming techniques Native catfish culture - a technology package for fish farmers Haniffa, M. A.; An assessment on the influence of salinity in the growth of black clam (Villorita cyprinoides) in cages in Cochin estuary with a special emphasis on the impact of Thennermukkom Salinity Barrier Arun, A. U.; Aquatic animal health EUS in Asia and Africa: Stimulus for regional initiatives!!! Mohan, C.V. Marine Finfish Aquaculture Network Offshore opportunities for artisanal aquaculture Stock, C.; Grouper aquaculture in Brazil Sanches, E.G. and Von Seckendorff, R.W. NACA Newsletter

Aquaculture Asia, Vol.14, No.4, pp.1-52, October - December 2009

Sustainable aquaculture Peter Edwards writes on rural aquaculture Edwards, P. Mussel farming initiatives in North Kerala, India: A case of successful adoption of technology leading to rural livelihood transformation Laxmilatha, P., Thomas, S., Asokan, P.K., Surendranathan, V.G., Sivadasan, M.P., and Ramachandran, N.P. Selective study on the availability in indigenous fish species having ornamental value in some districts of West Bengal Panigrahi, A.K., Dutta, S. and Ghosh, I. Aquaculture livelihoods service centres in Aceh, Indonesia: A novel approach to improving the livelihoods of small scale fish farmers Ravikumar, B. and Yamamoto, K. Research and farming techniques e-Sagu Aqua - an innovative information and communication technology model for transfer of technology for aquaculture Vimala, D. D., Ravisankar, T., Mahalakshmi, P., and Kumaran, M. Freshwater pearl crop: an emerging enterprise in the Indian subcontinent Misra, G., Jena, J. and Kumar, K. Genetics and biodiversity Preliminary risk assessment of Pacific white leg shrimp (P. vannamei) introduced to Thailand for aquaculture Senanan, W., Panutrakul, S., Barnette, P., Chavanich, S., Mantachitr, V., Tangkrock-Olan, N., and Viyakarn, V. Farmer profile Aquatic animal health Asian fish health experts visit Australia Olsen, L. and Ingram, B. (Fisheries Victoria) Black gill disease of cage-cultured ornate rock lobster Panulirus ornatus in central Vietnam caused by Fusarium species Nha, V.V., Hoa, D.T. and Khoa, L.V. Marine Finfish Aquaculture Network Effects of the partial substitution fish oil by soybean oil in the diets on muscle fatty acid composition of juvenile cobia (Rachycentron canadum) Hung, P.D. and Mao, N.D. Growth response of cobia Rachycentron canadum (Pisces: Rachycentridae) under the hypersaline conditions of the Emirate of Abu Dhabi Yousif, O.M.*, Kumar, K.K. and Abdul-Rahman, A.F.A. NACA Newsletter

Small angle X-ray scattering of the colloidal crystal

The monodisperse polystyrene spheres are assembled into the colloidal crystal on the glass substrate by vertical deposition method, which is aimed at the so-called photonic crystal applications. The structural information of the bulk colloidal crystal is crucial for understanding the crystal growth mechanism and developing the various applications of colloidal crystal. Small-angle X-ray scattering (SAXS) technique was used to obtain the bulk structure of the colloidal crystal at Beamline 1W2A of BSRF. It is found that the SAXS pattern is sensitive to the relative orientation between the colloidal sample and the incident X-ray direction. The crystal lattice was well distinguished and determined by the SAXS data.

Design and construction of portable surface aeration pump for tanks and small ponds

The maintenance of adequate dissolved oxygen level is very important in the economy of any aquaculture system. An easy to construct aerating device was created using 0.5 hp water-pump, shower rose, Styrofoam, and rubber hose. The aerator works by drawing water from below and discharging it into the atmosphere as a spray. The spray is aerated as it splashes into the water surface. The aerating device has an average spray of 1.2 unit and doubles the dissolved oxygen content of 37.8 m super(3) tank in one hour

The hydrology of a small fish pond at the University of Agriculture, Makurdi Experimental Fish Farm

The monthly and seasonal water requirements of a small fish pond (0.068ha; maximum capacity of 613.83m super(3)) at the University of Agriculture, Makurdi Fish Farm (Benue, Nigeria) were determined during the period of February to August 1996. The sources of water for the pond were rainfall, (103.4cm), run-off (6.3cm) and regulated inflow (95.0cm). The water loss for the period were Evapotranspiration, (106.74cm), Seepage (71.64cm) and regulated discharge (25.00cm). Evapotranspiration was identified as the main source of water loss while rainfall was the major source of water gain. The mean monthly water deficit was 24.56~c11.43cm while the mean monthly surplus was 9.84~c8.05cm. The quantity of water required to maintain the optimal water level in the pond was 474.00m super(3). Preliminary water budget of the study area showed that rainfed aquaculture can be effectively carried out at Makurdi during the months of June to October with supplementary inflows during the dry season months

Some aspects of the ecology and reproduction of the small pelagic cyprinid, Rastrineobola argentea in Lake Victoria

This study concentrated on the reproductive biology of the small pelagic cyprinid Rastrineobola argentea. The results indicate that this fish is an inshore spawning species, which agrees with other recent studies. It was also found that in areas where fishing intensity was likely to be relatively high, the size at first maturity of R. argentea was reduced, which is likely to be an effect of the fish altering its reproductive strategy according to life history theory. The CPUE results showed a general trend of decreasing with distance from shore, however areas less than one kilometer from the shore were not sampled. Evidence was also found suggesting that the cestode parasite, Ligula intestinalis had an adverse effect on the maturation and fecundity of R. argentea. Some management options concerning the findings in this study are also briefly discussed. (PDF has 82 pages)

Modeling on Runoff and Sediment Yield in Small Watersheds

The prediction and estimate of water and soil loss is fundamental important for understanding the effect of the spatial heterogeneity of underlying surfaces and preventing ecological environment deterioration. In this paper, a dynamic model of runoff and sediment yield in small watersheds is established. The proposed model includes three components: runoff generation caused by rainfall, soil erosion on hillslopes by overland flow, and runoff concentration and sediment transport on watersheds. Applying the proposed model, the runoff and sediment yield processes in a typical catchment on the loess plateau was estimated, which exhibited a good agreement between predicted results and observation.

Technological status and development prospects of small-scale fishing crafts in Nigerian coastal water

A study of fishing crafts was conducted in some coastal states of Nigeria to elucidate findings on the existing crafts as the baseline for further developments. Based on the technical designs, three types of fishing crafts were identified; planked, dug-out and half dug-out canoes. The planked canoes have the largest cubic number and dug-out canoes the least. At loadwater line, the ratio of freeboard to draft was 2 : 1 for planked canoes, indicating reserved buoyancy. Trim of planked canoe is by stern; the beam-length ratio for dug-out canoes showed high drag. Most of the sea-going canoes have U-shaped bottom hull profile capable of withstanding the rigours of surf landing and displayed good stability against longitudinal water wave. Gunwale and thwarts provided respectively the longitudinal and transverse strength of planked and half dug-out canoes. With its characteristics 'weight low down' construction, planked canoe represent the climax of small scale fishing crafts developments in Nigerian coastal waters. It's only draw back is durability. Further improvement in this canoe should be aimed at increasing the hull size and stiffness, water tightness of deck by coating, caulking, fastening, increasing level of motorization and installation of deck working equipments. Experimental design and use of fibre glass, aluminium and ferrocement hulls, together with improved planked canoe is highly advocated

Absorption of food in the black-jaw tilapia, Sarotherodon melanotheron (Ruppell) from a small tropical man-made lake in Ibadan, Nigeria

The carbohydrate, protein and lipid contents of the food ingested and their absorption in the intestine of Sarotherodon melanotheron inhabiting Awba lake in Ibadan, Nigeria, were investigated. Total carbohydrates of the ingested food ranged from 39.33 to 55.38% (mean = 48.70% while total protein and total lipid ranged from 10.10 to 17.13% (mean = 12.91%) and 7.79 to 8.96% (mean = 8.28%) dry weight, respectively. Calculated total percentages absorbed were 54.86-62.01 (mean 58.07) carbohydrates 47.33-54.06 (mean = 50.43) protein and 43.27-52.23% (mean 46.56) lipid. Absorption of protein and carbohydrate occurred mostly in the fore-gut (the first one-third of the intestine), while lipid was mostly absorbed in the mid-gut (the second one-third of the intestine). Dietary carbohydrate, protein and lipid contents of the food as well as the absorptive capacity of the intestine for these components of the food varied with size of fish