Vibration-assisted bone-graft compaction in impaction bone grafting of the femur

The complications of impaction bone grafting in revision hip replacement includes fracture of he femur and subsidence of the prosthesis. In this in vitro study we aimed to investigate whether the use of vibration, combined with a perforated tamp during the compaction of morsellised allograft would reduce peak loads and hoop strains in the femur as a surrogate marker of the risk of fracture and whether it would also improve graft compaction and prosthetic stability. We found that the peak loads and hoop strains transmitted to the femoral cortex during graft compaction and subsidence of the stem in subsequent mechanical testing were reduced. This innovative technique has the potential to reduce the risk of intra-operative fracture and to improve graft compaction and therefore prosthetic stability. © 2007 British Editorial Society of Bone and Joint Surgery.

Techniques to improve the shear strength of impacted bone graft: the effect of particle size and washing of the graft.

BACKGROUND: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. METHODS: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). RESULTS: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. CONCLUSIONS: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required.

Techniques to improve the shear strength of impacted bone graft: The effect of particle size and washing of the graft

Background: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. Methods: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). Results: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. Conclusions: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required. Clinical Relevance: Understanding the mechanical properties of milled human allograft is important when impaction grafting is used for mechanical support. A simple means of improving the mechanical strength of graft produced by currently available bone mills, including an intraoperative washing technique, is described.

Reversible disconnection of the hippocampal-prelimbic cortical circuit impairs spatial learning but not passive avoidance learning in rats

Wistar rats, treated with the GABA(A) receptor agonist muscimol, were used to investigate the role of the hippocampal-prelimbic cortical (Hip-PLC) circuit in spatial learning in the Morris water maze task, and in passive avoidance learning in the step-thr

Imaging the femoral cortex: thickness, density and mass from clinical CT.

There is growing evidence that focal thinning of cortical bone in the proximal femur may predispose a hip to fracture. Detecting such defects in clinical CT is challenging, since cortices may be significantly thinner than the imaging system's point spread function. We recently proposed a model-fitting technique to measure sub-millimetre cortices, an ill-posed problem which was regularized by assuming a specific, fixed value for the cortical density. In this paper, we develop the work further by proposing and evaluating a more rigorous method for estimating the constant cortical density, and extend the paradigm to encompass the mapping of cortical mass (mineral mg/cm(2)) in addition to thickness. Density, thickness and mass estimates are evaluated on sixteen cadaveric femurs, with high resolution measurements from a micro-CT scanner providing the gold standard. The results demonstrate robust, accurate measurement of peak cortical density and cortical mass. Cortical thickness errors are confined to regions of thin cortex and are bounded by the extent to which the local density deviates from the peak, averaging 20% for 0.5mm cortex.

Imaging the femoral cortex: Thickness, density and mass from clinical CT

There is growing evidence that focal thinning of cortical bone in the proximal femur may predispose a hip to fracture. Detecting such defects in clinical CT is challenging, since cortices may be significantly thinner than the imaging system's point spread function. We recently proposed a model-fitting technique to measure sub-millimetre cortices, an ill-posed problem which was regularized by assuming a specific, fixed value for the cortical density. In this paper, we develop the work further by proposing and evaluating a more rigorous method for estimating the constant cortical density, and extend the paradigm to encompass the mapping of cortical mass (mineral mg/cm 2) in addition to thickness. Density, thickness and mass estimates are evaluated on sixteen cadaveric femurs, with high resolution measurements from a micro-CT scanner providing the gold standard. The results demonstrate robust, accurate measurement of peak cortical density and cortical mass. Cortical thickness errors are confined to regions of thin cortex and are bounded by the extent to which the local density deviates from the peak, averaging 20% for 0.5mm cortex. © 2012 Elsevier B.V.

La 0.7Ca 0.3MnO 3 / Mn 3O 4 composites: Does an insulating secondary phase always enhance the low field magnetoresistance of manganites

Composites of magnetoresistive La 0.7Ca 0.3MnO 3 (LCMO) with insulating Mn 3O 4 are useful as a model system because no foreign cation is introduced in the LCMO phase by interdiffusion during the heat treatment. Here we report the magnetotransport properties as a function of sintering temperature T sinter for a fixed LCMO/Mn 3O 4 ratio. Decreasing T sinter from 1250 °C to 800 °C causes an increase in low field magnetoresistance (LFMR) that correlates with the decrease in crystallite size (CS) of the LCMO phase. When plotting LFMR at (77 K, 0.5 T) versus 1/CS, we find that the data for the LCMO/Mn 3O 4 composites sintered between 800 °C and 1250 °C follow the same trend line as data from the literature for pure LCMO samples with crystallite size >∼25 nm. This differs from the LFMR enhancement observed by many authors in the usual manganite composites, i.e., composites where the insulating phase contains cations other than La, Ca or Mn. This difference suggests that diffusion of foreign cations into the grain boundary region is a necessary ingredient for the enhanced LFMR. © 2012 American Institute of Physics.

Cortical thickness estimation of the proximal femur from multi-view Dual-Energy X-ray Absorptiometry (DXA)

Hip fracture is the leading cause of acute orthopaedic hospital admission amongst the elderly, with around a third of patients not surviving one year post-fracture. Although various preventative therapies are available, patient selection is difficult. The current state-of-the-art risk assessment tool (FRAX) ignores focal structural defects, such as cortical bone thinning, a critical component in characterizing hip fragility. Cortical thickness can be measured using CT, but this is expensive and involves a significant radiation dose. Instead, Dual-Energy X-ray Absorptiometry (DXA) is currently the preferred imaging modality for assessing hip fracture risk and is used routinely in clinical practice. Our ambition is to develop a tool to measure cortical thickness using multi-view DXA instead of CT. In this initial study, we work with digitally reconstructed radiographs (DRRs) derived from CT data as a surrogate for DXA scans: this enables us to compare directly the thickness estimates with the gold standard CT results. Our approach involves a model-based femoral shape reconstruction followed by a data-driven algorithm to extract numerous cortical thickness point estimates. In a series of experiments on the shaft and trochanteric regions of 48 proximal femurs, we validated our algorithm and established its performance limits using 20 views in the range 0°-171°: estimation errors were 0:19 ± 0:53mm (mean +/- one standard deviation). In a more clinically viable protocol using four views in the range 0°-51°, where no other bony structures obstruct the projection of the femur, measurement errors were -0:07 ± 0:79 mm. © 2013 SPIE.

Stable dynamic walking over uneven terrain

We propose a constructive control design for stabilization of non-periodic trajectories of underactuated robots. An important example of such a system is an underactuated "dynamic walking" biped robot traversing rough or uneven terrain. The stabilization problem is inherently challenging due to the nonlinearity, open-loop instability, hybrid (impact) dynamics, and target motions which are not known in advance. The proposed technique is to compute a transverse linearization about the desired motion: a linear impulsive system which locally represents "transversal" dynamics about a target trajectory. This system is then exponentially stabilized using a modified receding-horizon control design, providing exponential orbital stability of the target trajectory of the original nonlinear system. The proposed method is experimentally verified using a compass-gait walker: a two-degree-of-freedom biped with hip actuation but pointed stilt-like feet. The technique is, however, very general and can be applied to a wide variety of hybrid nonlinear systems. © The Author(s) 2011.

Minimalistic control of biped walking in rough terrain

Toward our comprehensive understanding of legged locomotion in animals and machines, the compass gait model has been intensively studied for a systematic investigation of complex biped locomotion dynamics. While most of the previous studies focused only on the locomotion on flat surfaces, in this article, we tackle with the problem of bipedal locomotion in rough terrains by using a minimalistic control architecture for the compass gait walking model. This controller utilizes an open-loop sinusoidal oscillation of hip motor, which induces basic walking stability without sensory feedback. A set of simulation analyses show that the underlying mechanism lies in the "phase locking" mechanism that compensates phase delays between mechanical dynamics and the open-loop motor oscillation resulting in a relatively large basin of attraction in dynamic bipedal walking. By exploiting this mechanism, we also explain how the basin of attraction can be controlled by manipulating the parameters of oscillator not only on a flat terrain but also in various inclined slopes. Based on the simulation analysis, the proposed controller is implemented in a real-world robotic platform to confirm the plausibility of the approach. In addition, by using these basic principles of self-stability and gait variability, we demonstrate how the proposed controller can be extended with a simple sensory feedback such that the robot is able to control gait patterns autonomously for traversing a rough terrain. © 2010 Springer Science+Business Media, LLC.

Stable dynamic walking over rough terrain: Theory and experiment

We propose a constructive control design for stabilization of non-periodic trajectories of underactuated mechanical systems. An important example of such a system is an underactuated "dynamic walking" biped robot walking over rough terrain. The proposed technique is to compute a transverse linearization about the desired motion: a linear impulsive system which locally represents dynamics about a target trajectory. This system is then exponentially stabilized using a modified receding-horizon control design. The proposed method is experimentally verified using a compass-gait walker: a two-degree-of-freedom biped with hip actuation but pointed stilt-like feet. The technique is, however, very general and can be applied to higher degree-of-freedom robots over arbitrary terrain and other impulsive mechanical systems. © 2011 Springer-Verlag.

1. 大鼠海马-前额叶回路在学习记忆中的作用2. 芬克罗酮改善恒河猴空间工作记忆的谷氨酸机制

一、大鼠海马-前额叶回路在学习记忆中的作用 解剖学研究证实大鼠和猴的海马结构（hippocampal formation, HF；本文‘海马 (hippocampus, Hip)’一词即指海马结构）和前额叶 (prefrontal cortex, PFC) 之间存在一条单向、同侧和单突触的神经回路，即海马-前额叶回路（Hip-PFC回路）。Hip和PFC均参与学习记忆等多种认知功能，PFC是工作记忆的关键脑区，而Hip是空间参考记忆的关键脑区。虽然人们已经对PFC和Hip进行了广泛深入的研究，但对Hip-PFC回路参与哪些认知功能还知之甚少。本研究的目的就是通过暂时阻断Hip-PFC回路，探讨其在学习和记忆中的作用。 在大鼠，Hip-PFC回路中的纤维主要从Hip腹部 (ventral hippocampus, VH)发出，投射到PFC的前边缘皮质(prelimbic cortex, PLC)、下边缘皮质 (infralimbic cortex, ILC) 和外侧前额叶 (lateral prefrontal cortex) 等亚区，其中PLC是Hip-PFC主要投射的区域。我们通过给动物安装慢性导管向脑内注射GABAA受体激动剂muscimol (MU) 阻断Hip-PFC回路。注射位点包括 ①双侧PLC，②双侧VH，③一侧VH和对侧PLC (VH-PLC)。我们首先观察了在PLC或VH局部注射MU对自由活动大鼠PLC和VH脑电功率的影响，并以此确定在行为实验中所用蝇蕈醇的剂量。然后采用T-迷宫空间交互延缓作业 (spatial delayed alternation task) 测试Hip-PFC回路被阻断的动物的空间工作记忆功能；采用被动回避作业 (passive avoidance task) 测试其情绪相关记忆的能力（训练前给药；24 h后重测试）；采用Morris水迷宫作业 (Morris water maze task) 测试其空间参考记忆的能力（每天训练前给药；训练期（3 d）结束24 h后重测试）。结果表明：在大鼠PLC或VH局部注射0.5 μg/0.25μl MU后30 min显著抑制VH 和PLC的脑电功率 (VH, p < 0.01; PLC, p < 0.05 vs. PBS/baseline)。注射MU (0.5 μg/0.25μl) 到 ①双侧PLC、②双侧VH、③VH-PLC均显著降低动物在空间交互延缓作业 (All p < 0.001, vs. PBS) 和空间Morris水迷宫作业中的成绩 (All p < 0.05, vs. PBS)，表明Hip-PFC回路在空间工作记忆（空间短时记忆）和在空间参考记忆（空间长时记忆）中均起重要作用。在空间交互延缓作业中，双侧PLC被抑制的大鼠的成绩显著低于双侧VH或VH-PLC被抑制的动物，说明PFC在空间工作记忆功能中占有主导地位。在被动回避作业中，双侧VH被抑制动物的回避反应的潜伏期显著短于对照动物 (p < 0.05 vs. PBS)，说明双侧VH被抑制动物的情绪记忆受损；而双侧PLC或VH-PLC被抑制的动物其回避反应的潜伏期与对照动物无显著差异 (PLC, p > 0.9; VH-PLC, p > 0.3 vs. PBS)，表明双侧PLC或VH-PLC被抑制的动物情绪记忆正常。被动回避作业的结果说明VH参与情绪记忆的形成，但Hip-PFC回路在情绪记忆形成中不起重要作用。 以上结果表明，大鼠Hip-PFC回路参与空间工作记忆和空间参考记忆而不是情绪记忆功能。情绪记忆的关键脑结构是杏仁复合体 (amygdala complex, AMC)，VH与AMC有密切的纤维联系。VH被抑制的大鼠情绪记忆受损，说明情绪记忆可能与AMC-Hip回路有关。情绪记忆与空间记忆（参考记忆和工作记忆）在解剖上的分离说明，对于不同类型的记忆来说，其在脑内的信息加工过程是并行的。神经回路内部的信息加工过程则是串行的，回路上任何一个结构的破坏均可导致回路功能的损伤。本研究的结果为学习记忆的“多重记忆系统”理论和记忆信息加工的串行并行机制提供了新的实验证据。 二、芬克罗酮改善成年恒河猴空间工作记忆的谷氨酸机制 芬克罗酮是中科院昆明植物所郝小江等合成的取代吡咯烷酮类化合物。中科院昆明动物所蔡景霞等发现芬克罗酮能改善东莨菪碱、育亨宾等导致的多种动物的不同类型的学习记忆障碍，提高老年动物的学习记忆能力，尤其是老年猴的空间工作记忆。已证实芬克罗酮为部分钙激动剂，可使脑缺血沙土鼠脑内升高的谷氨酸降低，而使正常的沙土鼠海马胞外谷氨酸释放增加。那么芬克罗酮能否提高正常动物的学习记忆，其对正常动物学习记忆的提高是否与其增加谷氨酸的释放有关？本研究采用空间延缓反应作业和谷氨酸NMDA受体拮抗剂MK-801在正常成年猴恒河猴上探讨了以上问题。 结果表明，口服芬克罗酮可显著提高成年猴的空间工作记忆，其量效曲线呈倒‘U’形，符合许多促智药的量效特点。0.25 mg/kg和0.5 mg/kg为芬克罗酮的最佳有效剂量 (p < 0.05 vs. 安慰剂)。肌注MK-801 (0.1 mg/kg) 显著降低成年猴的空间工作记忆 (p < 0.01 vs. 安慰剂)，而口服2.0 mg/kg和4.0 mg/kg的芬克罗酮则显著改善MK-801导致的工作记忆障碍 (p < 0.05 vs. MK-801)。芬克罗酮的所有测试剂量不影响猴在作业中的反应时 (p > 0.05 vs. 安慰剂)，表明芬克罗酮在该剂量范围不影响动物的运动能力。 本研究结果提示，芬克罗酮可能通钙激动作用促进谷氨酸的释放，在一定剂量范围内提高胞外谷氨酸水平，提高正常动物的空间工作记忆等认知功能。 关键词：芬克罗酮，恒河猴，空间工作记忆，空间延缓反应作业，谷氨酸，MK-801

岷江干旱河谷三种蔷薇植物繁殖更新研究

繁殖更新是植物生活史的重要阶段，在退化生态系统中，植物繁殖更新能力往往较差，是植被恢复的限制环节，因而也成为恢复研究重点和核心。本研究选择岷江干旱河谷广泛分布的三种蔷薇：多苞蔷薇（R. multibracteata）、黄蔷薇（R. hugonis）和川滇蔷薇（R. soulieana）为研究对象，通过野外调查，在查明其生长、繁殖更新状况的基础上，采用控制和模拟实验，对种子和幼苗阶段进行了深入研究，综合分析更新潜力，并提出相对应的促进更新和植被恢复措施。主要结论如下： 1）三种蔷薇在岷江干旱河谷广泛分布，生长和繁殖状况良好，结实量大。各生长指标：株高、基径和冠幅，繁殖指标：结实数量、重量和单果重量都具有显著的空间差异性。基径对多苞蔷薇结实量影响最大；而冠幅对黄蔷薇结实量影响最大。海拔和纬度是对蔷薇生长和繁殖影响最大的环境因素，随着海拔和纬度的升高，植株生长更高大，结实量增加；坡度和坡向对其生长和繁殖也有一定影响，随着坡度 和坡向增加，蔷薇生长和结实受到抑制。 2）三种蔷薇在岷江干旱河谷更新现状不佳, 但更新潜力大。活力种子比率低，动物取食以及两年生幼苗的大量死亡是蔷薇更新的主要限制因素。多苞蔷薇和黄蔷薇的结实率低，川滇蔷薇较高。三种蔷薇种子产量大，但种子质量较差，更新具有充足的种源。三种蔷薇都能形成持久种子库，种子库中种子总量大，但有效种子少，黄蔷薇被动物啃食的比例很高，多苞蔷薇和川滇蔷薇也有一部分种子受到动物破坏。三种蔷薇幼苗库组成特征表现为，当年生幼苗所占比例很高，年龄较大幼苗所占比例小。 3）三种蔷薇都具有不同程度休眠，未经处理种子的发芽率极低。黄蔷薇休眠程度最深，为深度生理休眠；多苞蔷薇为中度生理休眠；川滇蔷薇为非深度生理休眠。三种蔷薇种子在形态上发育成熟，种皮具有透水性。蔷薇果果肉和瘦果中含有抑制物质，其浸泡液抑制了油菜种子萌发，果肉抑制作用更强，果肉和瘦果浸泡液的抑制程度分别为：川滇蔷薇>黄蔷薇>多苞蔷薇。切割和硫酸腐蚀提高了川滇蔷薇种子的发芽能力，而对多苞蔷薇和黄蔷薇没有影响。完全去除瘦果果皮和种皮提高了多苞蔷薇种子发芽率，但对黄蔷薇没有影响。赤霉素和烟水对蔷薇种子萌发没有促进作用。三种蔷薇打破休眠所需低温层积时间分别为：黄蔷薇>多苞蔷薇>川滇蔷薇。对于多苞蔷薇和川滇蔷薇，层积前对种子进行硫酸腐蚀或暖温层积能缩短低温层积时间，提高发芽率。对于多苞蔷薇，变温层积中暖温层积和低温层积具有一定的负补性，即延长暖温层积可以缩短种子萌发对低温层积的需要。 4）多苞蔷薇种子形态特征和种子休眠与萌发在不同海拔梯度间存在较大差异。种子采集时间、采集季节和干藏影响多苞蔷薇和川滇蔷薇的种子休眠。多苞蔷薇果实大小、种子大小和千粒重、种皮厚度随海拔升高而增加，而种子饱满率和活力随海拔升高而降低，种子休眠程度也随海拔升高而增加。种皮厚度与种子大小、千粒重成正相关关系，硫酸腐蚀后的种子经过不同时间的低温层积后，种子发芽率与种皮厚度、种子大小、千粒重、海拔成正相关关系。2006 年采集川滇蔷薇和多苞蔷薇种子休眠程度较2005 年低。种子休眠随种子年龄增加而减弱。高温和干旱能减轻多苞蔷薇和川滇蔷薇种子休眠。 5）三种蔷薇的生长和生物量积累在干旱胁迫条件下受到抑制，而生物量分配、叶片形态特征和水分利用特征等都发生了变化。三种蔷薇的根、茎、叶各器官生物量以及总生物量等在干旱胁迫下明显减小，叶片脱落数量增加。在干旱胁迫条件下，较多的生物量分配到地下部分，从而这使R/S 明显增加。比叶面积（SLA）和冠层面积比（LAR）对干旱胁迫的反应不敏感，仅有部分物种在干旱胁迫条件下发生了变化，并且其变化特点在不同年龄幼苗之间有一定差异。干旱胁迫对WUE 的影响在不同物种间存在差异。多苞蔷薇和黄蔷薇的WUE 随着干旱胁迫的增加而增大， 而川滇蔷薇的WUE 则随干旱胁迫增加而减小。在干旱胁迫条件下，多苞蔷薇和黄蔷薇叶片脱落量和生物量减小幅度较川滇蔷薇大，表明其抗旱能力较强。在干旱胁迫条件，三种蔷薇两年生幼苗的生物量减小幅度较当年生幼苗小，表明两年生幼苗的抗旱能力更强。 6）两种植被恢复措施中，幼苗移栽比播种具有更好的植被恢复效果。播种后，蔷薇种子的发芽率较高，但出苗率都很低，即使出苗，幼苗也几乎在一月内全部死亡。 三种微生境条件下（灌木、半灌木和裸地），种子出苗和幼苗成活没有差异。移栽幼苗总体死亡率都比较低，小于20％。特别是两年生幼苗死亡率更低，小于2％。移栽后的幼苗生长状况良好，在整个生长季中，各生长指标不断增加。生境对幼苗的存活率没有显著影响，但对于幼苗的生长和生物量积累有一定影响，裸地更有利于幼苗生长和生物量积累。与当年生幼苗相比，两年生幼苗具有更高的成活率。总之，三种蔷薇在干旱河谷分布广泛、生长繁殖状况良好，结实量大，具有丰富种源，繁殖更新潜力大，但繁殖更新状况不佳；种子散布后动物对种子的取食、种子的深度休眠过程、种子出苗以及当年生幼苗的存活和定居是更新的主要限制环节。水分是影响结实、种子休眠解除和萌发，幼苗存活和定居的最主要的限制因素。在植被恢复中，应在种子成熟季节大量采集种子，在室内打破休眠后进行人工播种，培育两年生幼苗，通过幼苗移栽方式进行植被恢复。川滇蔷薇应栽种在相对湿润的过渡区，而多苞蔷薇和黄蔷薇可以应用于核心区植被恢复。 Regeneration is an important phase in plant life cycle. It has been a key component of ecological restoration in degradation ecosystem in which plants commonly has poor regeneration. In this paper, we investigated the natural growth, propagation and regeneration status of native three rose species, Rosa multibracteata, R. hugonis and R. soulieana, and analysis the limitation in seed germination and seedling establishment stages. Advice on facilitating the use of these plants in restoration based on the results has been proposed. The results were as follows: 1) Three rose plants widely distributed in the dry valley of the Minjiang River, and made a good performance in growth and propagation. There were significant spatial differences in each growth parameter, such as ramet height, basal diameter, crown diameter and propagation parameters including hip number of a clump, hip mass of a clump and a hip mass. Basa diameter was the most important growth parameter influencing fruit number for R. multibracteata and crown diameter was for R. hugoni. Altitude and latitude had the greatest effect on the growth and propagation of rose plants among environmental conditions. Each parameter of growth and propagation increased with the increase of altitude and latitude. In addition, the increase of slope and aspect limited the growth and propagation. 2) Three rose plants had poor natural regeneration, but great regeneration potential. Low seed viability, predation and higher mortality of current year old seedlings were the limitation in regeneration. R. multibracteata and R. hugonis had higher fruiting rates than R. souliean. All three plants produced a great number of seeds, while their viability was poor. Three rose plants had persistent seed banks, with high total seed number but very low viable seed density. Predation was most severe in R. hugonis, and it also existed to some degree in R. multibracteata and R. soulieana. The seedling age-structure was characteristic of current-year seedlings predominating and few older seedlings were observed. 3) Three rose seeds were dormant and untreated seeds germinated with very low germination percentages. The rose seeds had morphological mature embryos, and achenes were permeable. Some inhabit substances existed in hips and achenes for the extracts of hips and achenes inhibited germination of Brassica campestris. The inhibition effect of the extracts of three rose hip and achenes was R. soulieana>R. hugonis>R. multibracteata. Mechanical and H2SO4 scarification increased R. soulieana germination but had no effect on germination of R. hugonis and R. multibracteata seeds. Full removal of pericarp and testa improved the germination of R. multibracteata but did not affect R. hugonis germination. GA3 and smoke water had no positive effect on rose seed germination. The periods of cold stratification required to released seed dormancy was R. hugonis > R. soulieana >R. multibracteata. H2SO4 scarification and warm stratification shortened cold stratification to release dormancy for R. soulieana and R. multibracteata. Warm stratification had complementary effect for cold stratification, i.e. the longer warm stratification seeds received, the shorter cold stratification were required to obtain the same germination percentage. Three rose seeds had different kinds of dormancy; R. hugonis has deep physiological dormancy, R. multibracteata with intermediate physiological dormancy and R. souliean non-deep physiological dormancy. 4）The seeds traits and dormancy of R. multibracteata showed significant difference across altitudes. Year and season of seed collection had significant effect on seed dormancy for both R. souliean and R. multibracteata. Hip size, seed size, seed weight, seed coat thickness and seed dormancy level increased with the increase of the altitude. There were positive relations between seed coat thickness with seed size and seed weight. Germination percentage of seeds treated with H2SO4 scarification following different periods of cold stratification showed positive relation with seed coat thickness, seed size, seed weight and altitude. Seeds of R. souliean and R. multibracteata collected in 2006 had low dormancy level than those collected in 2005. Seed dormancy decreased with increasing seeds age. High temperature and drought were associated with low dormancy level. 5) Seedling growth, the total dry mass and their components of seedlings were reduced, while leaf senescence accelerated under drought stress. More biomass allocation to root system resulted in higher R/S ratio under drought. Water-use efficiency (WUE) of R. multibracteata and R. hugonis increased, while it declined for R. soulieana under drought stress. R. soulieana seedlings had poor drought-resistance capacity it had more senescent leaves, and its reduction of biomass was stronger than two other rose plants under drought. The reduction degree of one year old seedlings under drought stress was slighter than that of current year seedlings. Therefore, one year old seedling was more drought-resistent compared to current year seedlings. 6）Planting seedlings may have better effect in comparison with direct seeding. Most seeds germinated after seeding, but seedling emergence was very low. More than 80 % seedlings from direct seeding died within a months after emergence. Seedling emergence and survival rate did not show difference among microhabitats. Mortality rates of seedlings artificially planted in microhabitats were general lower than 20 %, and the mortality rate of one year old seedlings was lower than 2 %. Each grow parameter including plant height, leaf number and branch number continually increased after planting. Microhabitat type had effect on the growth parameter and biomass production, but it did not influence the seedling survival. Bare land tended to facilitate seedling growth. One year old seedlings had higher survival rate than current year seedlings. In conculsion, the three rose had wide distribution in the dry valley of the Minjiang River. They produced many seeds and had tolerance to drought stress to some degree. But they had poor regeneration in habitats may be caused by predation, seed dormancy，and high mortality in current year seedlings. We recommend that rose plants should be utilized in restoration by planting two-year old seedlings in spring. A large quantity of seeds should be collected artificially in autumn, release seed dormancy in room, and then cultivate two-year old seedlings by seeding in particular container. R. soulieana seedling probably be planted in transition area, and R. multibracteata and R. hugonis can be used in core area of the dry valley of the Minjiang River.

抑制前额叶和海马的星形胶质细胞功能对大鼠工作记忆的影响，长期服用芬克罗酮改善老年大鼠学习记忆障碍的突触可塑性机制

长期以来，星形胶质细胞（astrocyte，AS）被认为具有细胞隔离、支持、保护和营养神经元的作用。近来，人们逐渐发现，AS还有许多其他重要的功能。例如，谷氨酸是中枢神经系统中重要的兴奋性神经递质，AS摄取和合成谷氨酸的作用可能影响学习、神经发育及发情周期等多种脑功能，并影响突触形成和突触传递效能。有研究发现，成年海马齿状回颗粒下层具有神经干细胞潜能的AS，可以分化成新生神经元。此外，海马成熟的AS还参与调节神经发生，决定神经干细胞的分化方向。大鼠海马新生神经元与海马依赖性记忆（happocampal- dependent memory）密切相关。提示，AS与学习记忆密切相关。但迄今为止，尚未见AS参与工作记忆的报道。本研究以特异性抑制AS细胞的化合物fluorocitrate（FC）作为工具药来探讨AS在大鼠工作记忆中的作用及作用机制。FC可抑制AS三羧酸循环中乌头酸酶（aconitase）的活性，从而抑制AS摄取谷氨酸的功能，其作用是可逆的，目前已经被广泛用于研究AS的功能。我们通过慢性导管在大鼠双侧前额叶（prefrontal cortex，PFC），双侧海马（hippocampus，HIP）和单侧侧脑室（lateral ventricle，LV）分别注射FC，记录注射后15-75min内自由活动大鼠的脑电图（EEG）功率变化，以判断FC对大鼠PFC和HIP神经元兴奋性的影响，并在注射后15-75min内完成T-迷宫空间交互延缓(spatial delayed alternation task)反应测试，分析动物的空间工作记忆功能。结果发现在双侧PFC和双侧HIP分别注射1，2，5nM FC （0.5μl），仅2，5nM显著增加HIP EEG的功率（ p < 0.05 vs. SAL），但对交互延缓反应成绩无明显影响，所有剂量对PFC的EEG功率没有显著影响，且不影响动物操作交互延缓反应作业的成绩（ALL p > 0.1 vs. SAL）。在单侧LV注射0.05，0.5nM FC （10μl）后，PFC的EEG功率没有明显变化，而HIP的EEG功率有增加。该剂量的FC对大鼠操作空间交互延缓作业的成绩无明显影响。在单侧LV注射2nM FC（10μl）同时显著增加PFC和HIP的EEG功率，并显著提高大鼠操作空间交互延缓反应作业中的正确率，改善大鼠的工作记忆（ p < 0.05 vs. SAL）。单侧LV注射5nM FC（10μl）同时显著降低PFC和HIP的EEG功率（ALL p < 0.05 vs. SAL）和大鼠操作作业的正确率，损伤大鼠的工作记忆（ p < 0.05 vs. SAL）。表明只有在PFC和HIP的EEG功率同时受到影响的时候，大鼠操作作业的正确率才会发生显著改变。已有研究指出，前额叶和海马均参与工作记忆调控。在LV给FC将同时作用于双侧PFC和双侧HIP。因此，我们认为，FC对大鼠空间交互延缓作业成绩的影响可能是通过抑制PFC和HIP的AS功能产生的。在单侧LV注射低浓度（0.05，0.5nM）的FC对大鼠空间交互延缓作业成绩和EEG功率水平均无明显影响，可能与脑内AS的功能尚可，谷氨酸水平升高不明显有关，而高浓度（5nM）FC可能较强地抑制AS摄取胞外谷氨酸的功能，胞外谷氨酸水平过度升高，损伤神经元的活性，使EEG功率降低，结果导致工作记忆受损。高浓度FC也可能直接损伤神经元的活性。本研究结果表明，FC短期抑制PFC和HIP的AS功能，将使PFC和HIP胞外谷氨酸水平升高，从而改变PFC和HIP神经元的兴奋性，使大鼠的空间工作记忆功能发生改变。揭示了工作记忆不仅依赖于PFC-HIP回路中神经元的正常功能，也与PFC-HIP回路中AS的功能正常与否密切相关。

Phase conversion and spectral properties of long lasting phosphor Zn-3 (PO4)(2): Mn2+, Ga3+

A red long lasting phosphor Zn-3(PO4)(2): Mn2+ Ga3+ (ZPMG) was prepared by ceramic method, and phase conversion and spectral properties were investigated. Results indicated that the phase conversion from alpha-Zn-3(PO4), beta-Zn-3(PO4)(2) to gamma-Zn-3(PO4)(2) occurs with different manganese concentration incorporated and sinter process. The structural change induced by the phase transformation results in a remarkable difference in the spectral properties. The possible luminescence mechanism for this red LLP with different forms has been illustrated.