Enhanced target detection in clutter using dispersive delay lines and time reversal

On the basis of the technique of time reversal (TR), a new method for low dielectric contrast target detection in clutter by adding dispersive delay lines (DDLs) to each element of the TR mirror (TRM) is proposed. When compared with a conventional TR system, the proposed method improves refocusing to a target by reducing the impact of other scatterers in the environment. The proposed method makes it unnecessary to estimate the position of the target and removes the need for subsequent subtraction as traditionally required. Theoretical and numerical simulated results demonstrate the proposed method.

A review on completing arsenic biogeochemical cycle: Microbial volatilization of arsines in environment

Arsenic (As) is ubiquitous in the environment in the carcinogenic inorganic forms, posing risks to human health in many parts of the world. Many microorganisms have evolved a series of mechanisms to cope with inorganic arsenic in their growth media such as transforming As compounds into volatile derivatives. Bio-volatilization of As has been suggested to play an important role in global As biogeochemical cycling, and can also be explored as a potential method for arsenic bioremediation. This review aims to provide an overview of the quality and quantity of As volatilization by fungi, bacteria, microalga and protozoans. Arsenic bio-volatilization is influenced by both biotic and abiotic factors that can be manipulated/elucidated for the purpose of As bioremediation. Since As bio-volatilization is a resurgent topic for both biogeochemistry and environmental health, our review serves as a concept paper for future research directions.

Critical evaluation of pulse-echo ultrasonic test method for the determination of setting and mechanical properties of acrylic bone cement: Influence of mixing technique

Currently there is no reliable objective method to quantify the setting properties of acrylic bone cements within an operating theatre environment. Ultrasonic technology can be used to determine the acoustic properties of the polymerising bone cement, which are linked to material properties and provide indications of the physical and chemical changes occurring within the cement. The focus of this study was the critical evaluation of pulse-echo ultrasonic test method in determining the setting and mechanical properties of three different acrylic bone cement when prepared under atmospheric and vacuum mixing conditions. Results indicated that the ultrasonic pulse-echo technique provided a highly reproducible and accurate method of monitoring the polymerisation reaction and indicating the principal setting parameters when compared to ISO 5833 standard, irrespective of the acrylic bone cement or mixing method used. However, applying the same test method to predict the final mechanical properties of acrylic bone cement did not prove a wholly accurate approach. Inhomogeneities within the cement microstructure and specimen geometry were found to have a significant influence on mechanical property predictions. Consideration of all the results suggests that the non-invasive and non-destructive pulse-echo ultrasonic test method is an effective and reliable method for following the full polymerisation reaction of acrylic bone cement in real-time and then determining the setting properties within a surgical theatre environment. However the application of similar technology for predicting the final mechanical properties of acrylic bone cement on a consistent basis may prove difficult.

An integrated approach for real-time model-based state-of-charge estimation of lithium-ion batteries

Lithium-ion batteries have been widely adopted in electric vehicles (EVs), and accurate state of charge (SOC) estimation is of paramount importance for the EV battery management system. Though a number of methods have been proposed, the SOC estimation for Lithium-ion batteries, such as LiFePo4 battery, however, faces two key challenges: the flat open circuit voltage (OCV) vs SOC relationship for some SOC ranges and the hysteresis effect. To address these problems, an integrated approach for real-time model-based SOC estimation of Lithium-ion batteries is proposed in this paper. Firstly, an auto-regression model is adopted to reproduce the battery terminal behaviour, combined with a non-linear complementary model to capture the hysteresis effect. The model parameters, including linear parameters and non-linear parameters, are optimized off-line using a hybrid optimization method that combines a meta-heuristic method (i.e., the teaching learning based optimization method) and the least square method. Secondly, using the trained model, two real-time model-based SOC estimation methods are presented, one based on the real-time battery OCV regression model achieved through weighted recursive least square method, and the other based on the state estimation using the extended Kalman filter method (EKF). To tackle the problem caused by the flat OCV-vs-SOC segments when the OCV-based SOC estimation method is adopted, a method combining the coulombic counting and the OCV-based method is proposed. Finally, modelling results and SOC estimation results are presented and analysed using the data collected from LiFePo4 battery cell. The results confirmed the effectiveness of the proposed approach, in particular the joint-EKF method.

How should teaching on whole person medicine, including spiritual issues, be delivered in the undergraduate medical curriculum in the United Kingdom?

Background

Although the General Medical Council recommends that United Kingdom medical students are taught ‘whole person medicine’, spiritual care is variably recognised within the curriculum. Data on teaching delivery and attainment of learning outcomes is lacking. This study ascertained views of Faculty and students about spiritual care and how to teach and assess competence in delivering such care.

A questionnaire comprising 28 questions exploring attitudes to whole person medicine, spirituality and illness, and training of healthcare staff in providing spiritual care was designed using a five-point Likert scale. Free text comments were studied by thematic analysis. The questionnaire was distributed to 1300 students and 106 Faculty at Queen’s University Belfast Medical School.

351 responses (54 staff, 287 students; 25 %) were obtained. >90 % agreed that whole person medicine included physical, psychological and social components; 60 % supported inclusion of a spiritual component within the definition. Most supported availability of spiritual interventions for patients, including access to chaplains (71 %), counsellors (62 %), or members of the patient’s faith community (59 %). 90 % felt that personal faith/spirituality was important to some patients and 60 % agreed that this influenced health. However 80 % felt that doctors should never/rarely share their own spiritual beliefs with patients and 67 % felt they should only do so when specifically invited. Most supported including training on provision of spiritual care within the curriculum; 40-50 % felt this should be optional and 40 % mandatory. Small group teaching was the favoured delivery method. 64 % felt that teaching should not be assessed, but among assessment methods, reflective portfolios were most favoured (30 %). Students tended to hold more polarised viewpoints but generally were more favourably disposed towards spiritual care than Faculty. Respecting patients’ values and beliefs and the need for guidance in provision of spiritual care were identified in the free-text comments.

Students and Faculty generally recognise a spiritual dimension to health and support provision of spiritual care to appropriate patients. There is lack of consensus whether this should be delivered by doctors or left to others. Spiritual issues impacting patient management should be included in the curriculum; agreement is lacking about how to deliver and assess.

How Video Lecture Capture affects Student Engagement in a University Computer Programming Course: Attendance, Video Viewing Behaviours and Student Attitudes

Introduction
The use of video capture of lectures in Higher Education is not a recent occurrence with web based learning technologies including digital recording of live lectures becoming increasing commonly offered by universities throughout the world (Holliman and Scanlon, 2004). However in the past decade the increase in technical infrastructural provision including the availability of high speed broadband has increased the potential and use of videoed lecture capture. This had led to a variety of lecture capture formats including pod casting, live streaming or delayed broadcasting of whole or part of lectures.
Additionally in the past five years there has been a significant increase in the popularity of online learning, specifically via Massive Open Online Courses (MOOCs) (Vardi, 2014). One of the key aspects of MOOCs is the simulated recording of lecture like activities. There has been and continues to be much debate on the consequences of the popularity of MOOCs, especially in relation to its potential uses within established University programmes.
There have been a number of studies dedicated to the effects of videoing lectures.
The clustered areas of research in video lecture capture have the following main themes:
• Staff perceptions including attendance, performance of students and staff workload
• Reinforcement versus replacement of lectures
• Improved flexibility of learning
• Facilitating engaging and effective learning experiences
• Student usage, perception and satisfaction
• Facilitating students learning at their own pace
Most of the body of the research has concentrated on student and faculty perceptions, including academic achievement, student attendance and engagement (Johnston et al, 2012).
Generally the research has been positive in review of the benefits of lecture capture for both students and faculty. This perception coupled with technical infrastructure improvements and student demand may well mean that the use of video lecture capture will continue to increase in frequency in the next number of years in tertiary education. However there is a relatively limited amount of research in the effects of lecture capture specifically in the area of computer programming with Watkins 2007 being one of few studies . Video delivery of programming solutions is particularly useful for enabling a lecturer to illustrate the complex decision making processes and iterative nature of the actual code development process (Watkins et al 2007). As such research in this area would appear to be particularly appropriate to help inform debate and future decisions made by policy makers.
Research questions and objectives
The purpose of the research was to investigate how a series of lecture captures (in which the audio of lectures and video of on-screen projected content were recorded) impacted on the delivery and learning of a programme of study in an MSc Software Development course in Queen’s University, Belfast, Northern Ireland. The MSc is conversion programme, intended to take graduates from non-computing primary degrees and upskill them in this area. The research specifically targeted the Java programming module within the course. It also analyses and reports on the empirical data from attendances and various video viewing statistics. In addition, qualitative data was collected from staff and student feedback to help contextualise the quantitative results.
Methodology, Methods and Research Instruments Used
The study was conducted with a cohort of 85 post graduate students taking a compulsory module in Java programming in the first semester of a one year MSc in Software Development. A pre-course survey of students found that 58% preferred to have available videos of “key moments” of lectures rather than whole lectures. A large scale study carried out by Guo concluded that “shorter videos are much more engaging” (Guo 2013). Of concern was the potential for low audience retention for videos of whole lectures.
The lecturers recorded snippets of the lecture directly before or after the actual physical delivery of the lecture, in a quiet environment and then upload the video directly to a closed YouTube channel. These snippets generally concentrated on significant parts of the theory followed by theory related coding demonstration activities and were faithful in replication of the face to face lecture. Generally each lecture was supported by two to three videos of durations ranging from 20 – 30 minutes.
Attendance
The MSc programme has several attendance based modules of which Java Programming was one element. In order to assess the consequence on attendance for the Programming module a control was established. The control used was a Database module which is taken by the same students and runs in the same semester.
Access engagement
The videos were hosted on a closed YouTube channel made available only to the students in the class. The channel had enabled analytics which reported on the following areas for all and for each individual video; views (hits), audience retention, viewing devices / operating systems used and minutes watched.
Student attitudes
Three surveys were taken in regard to investigating student attitudes towards the videoing of lectures. The first was before the start of the programming module, then at the mid-point and subsequently after the programme was complete.
The questions in the first survey were targeted at eliciting student attitudes towards lecture capture before they had experienced it in the programme. The midpoint survey gathered data in relation to how the students were individually using the system up to that point. This included feedback on how many videos an individual had watched, viewing duration, primary reasons for watching and the result on attendance, in addition to probing for comments or suggestions. The final survey on course completion contained questions similar to the midpoint survey but in summative view of the whole video programme.
Conclusions and Outcomes
The study confirmed findings of other such investigations illustrating that there is little or no effect on attendance at lectures. The use of the videos appears to help promote continual learning but they are particularly accessed by students at assessment periods. Students respond positively to the ability to access lectures digitally, as a means of reinforcing learning experiences rather than replacing them. Feedback from students was overwhelmingly positive indicating that the videos benefited their learning. Also there are significant benefits to part recording of lectures rather than recording whole lectures. The behaviour viewing trends analytics suggest that despite the increase in the popularity of online learning via MOOCs and the promotion of video learning on mobile devices in fact in this study the vast majority of students accessed the online videos at home on laptops or desktops However, in part, this is likely due to the nature of the taught subject, that being programming.
The research involved prerecording the lecture in smaller timed units and then uploading for distribution to counteract existing quality issues with recording entire live lectures. However the advancement and consequential improvement in quality of in situ lecture capture equipment may well help negate the need to record elsewhere. The research has also highlighted an area of potentially very significant use for performance analysis and improvement that could have major implications for the quality of teaching. A study of the analytics of the viewings of the videos could well provide a quick response formative feedback mechanism for the lecturer. If a videoed lecture either recorded live or later is a true reflection of the face to face lecture an analysis of the viewing patterns for the video may well reveal trends that correspond with the live delivery.

Physiological stress in the Eurasian badger (Meles meles): Effects of host, disease and environment

A method for monitoring hypothalamic–pituitary–adrenal (HPA) responses of the Eurasian badger (Meles meles) to stressors was validated by measuring cortisol excretion in serum and faeces. Serum and faecal samples were collected under anaesthesia from live-captured, wild badgers and fresh faeces was collected from latrines at 15 social groups in County Down, Northern Ireland. Variation in levels of cortisol in wild badgers was investigated relative to disease status, season, age, sex, body mass, body condition and reproductive status and environmental factors that might influence stress. Faecal cortisol levels were significantly higher in animals testing culture-positive for Mycobacterium bovis. Prolonged elevation of cortisol can suppress immune function, which may have implications for disease transmission. There was a strong seasonal pattern in both serum cortisol, peaking in spring and faecal cortisol, peaking in summer. Cortisol levels were also higher in adults with poor body condition and low body mass. Faecal samples collected from latrines in grassland groups had significantly higher cortisol than those collected from woodland groups, possibly as a result of greater exposure to sources of environmental stress. This study is the first to investigate factors influencing physiological stress in badgers and indicates that serological and faecal excretion are valid indices of the HPA response to a range of stressors.

Innovative interprofessional teaching session on labour and childbirth for undergraduate medical and midwifery students

There is an increasing recognition of the need to improve interprofessional relationships within clinical practice (Midwifery 2020, 2010). Evidence supports the assertion that healthcare professionals who are able to communicate and work effectively together and who have a mutual respect and understanding for one another’s roles will provide a higher standard of care (McPherson et al, 2001; Miers et al, 2005; Begley, 2008). The joint Royal College of Obstetrics & Gynaecologists(RCOG) / Royal College of Midwives (RCM) report (2008 Page 8) on clinical learning environment and recruitment recommended that “Inter-professional learning strategies should be introduced and supported at an early stage in the medical and midwifery undergraduate students' experience and continued throughout training.” Providing interprofessional education within a University setting offers an opportunity for a non-threatening learning environment where students can develop confidence and build collaborative working relationships with one another (Saxell et al, 2009).Further research supports the influence of effective team working on increased client satisfaction. Additionally it identifies that the integration of interprofessional learning into a curriculum improves students’ abilities to interact professionally and provides a better understanding of role identification within the workplace than students who have only been exposed to uniprofessional education (Meterko et al, 2004; Pollard and Miers, 2008; Siassakos, et al, 2009; Wilhelmsson et al, 2011; Murray-Davis et al, 2012). An interprofessional education indicative has been developed by teaching staff from the School of Nursing and Midwifery and School of Medicine at Queen’s University Belfast. The aim of the collaboration was to enhance interprofessional learning by providing an opportunity for medical students and midwifery students to interact and communicate prior to medical students undertaking their obstetrics and gynaecology placements. This has improved medical students placement experience by facilitating them to learn about the process of birth and familiarisation of the delivery suite environment and it also has the potential to enhance interprofessional relationships. Midwifery students benefit through the provision of an opportunity to teach and facilitate learning in relation to normal labour and birth and has provided them with an opportunity to build stronger and more positive relationships with another profession. This opportunity also provides a positive, confidence building forum where midwifery students utilise teaching and learning strategies which would be transferable to their professional role as registered midwives. The midwifery students were provided with an outline agenda in relation to content for the workshop, but then were allowed creative licence with regard to delivery of the workshop. The interactive workshops are undertaken within the University’s clinical education centre, utilising low fidelity simulation. The sessions are delivered 6 times per year and precede the medical students’ obstetric/gynaecology placement. All 4th year medical and final year midwifery students have an opportunity to participate. Preliminary evaluations of the workshops have been positive from both midwifery and medical students. The teaching sessions provided both midwifery and medical students with an introduction to inter professional learning and gave them an opportunity to learn about and respect each other’s roles. The midwifery students have commented on the enjoyable aspects of team working for preparing for the workshop and also the confidence gained from teaching medical students. The medical students have evaluated the teaching by midwifery students positively and felt that it lowered their anxiety levels going into the labour setting. A number of midwifery and medical students have subsequently worked with one another within the practice setting which has been recognised as beneficial. Both Schools have recognised the benefits of interprofessional education and have subsequently made a commitment to embed it within each curriculum.

A Novel Semi-Automated Method of Tracking Fetal Movements

We have designed software that can â€â€™look’’ at recorded ultrasound sequences. We analyzed fifteen video sequences representing recorded ultrasound scans of nine fetuses. Our method requires a small amount of user labelled pixels for processing the first frame. These initialize GrowCut 1 , a background removal algorithm, which was used for separating the fetus from its surrounding environment (segmentation). For each subsequent frame, user input is no longer necessary as some of the pixels will inherit labels from the previously processed frame. This results in our software’s ability to track movement. Two sonographers rated the results of our computer’s â€vision’ on a scale from 1 (poor fit) to 10 (excellent fit). They assessed tracking accuracy for the entire video as well as segmentation accuracy (the ability to identify fetus from non-fetus) for every 100th processed frame. There was no appreciable deterioration in the software’s ability to track the fetus over time. I

Evaluating genetic traceability methods for captive-bred marine fish and their applications in fisheries management and wildlife forensics

Growing demands for marine fish products is leading to increased pressure on already depleted wild populations and a rise in aquaculture production. Consequently, more captive-bred fish are released into the wild through accidental escape or deliberate releases. The increased mixing of captive-bred and wild fish may affect the ecological and/or genetic integrity of wild fish populations. Unambiguous identification tools for captive-bred fish will be highly valuable to manage risks (fisheries management) and tracing of escapees and seafood products (wildlife forensics). Using single nucleotide polymorphism (SNP) data from captive-bred and wild populations of Atlantic cod Gadus morhua L. and sole Solea solea L., we explored the efficiency of population and parentage assignment techniques for the identification and tracing of captive-bred fish. Simulated and empirical data were used to correct for stochastic genetic effects. Overall, parentage assignment performed well when a large effective population size characterized the broodstock and escapees originated from early generations of captive breeding. Consequently, parentage assignments are particularly useful from a fisheries management perspective to monitor the effects of deliberate releases of captive-bred fish on wild populations. Population assignment proved to be more efficient after several generations of captive breeding, which makes it a useful method in forensic applications for well-established aquaculture species. We suggest the implementation of a case-by-case strategy when choosing the best method.

Choice of commuting mode among employees: Do home neighborhood environment, worksite neighborhood environment, and worksite policy and supports matter?

BACKGROUND: Promoting the use of public transit and active transport (walking and cycling) instead of car driving is an appealing strategy to increase overall physical activity.

PURPOSE: To quantify the combined associations between self-reported home and worksite neighborhood environments, worksite support and policies, and employees' commuting modes.

METHOD: Between 2012 and 2013, participants residing in four Missouri metropolitan areas were interviewed via telephone (n = 1,338) and provided information on socio-demographic characteristics, home and worksite neighborhoods, and worksite support and policies. Commuting mode was self-reported and categorized into car driving, public transit, and active commuting. Commuting distance was calculated using geographic information systems. Commuters providing completed data were included in the analysis. Multivariate logistic regression models were used to examine the correlates of using public transit and active commuting.

RESULT: The majority of participants reported commuting by driving (88.9%); only 4.9% used public transit and 6.2% used active modes. After multivariate adjustment, having transit stops within 10-15 minutes walking distance from home (p=0.05) and using worksite incentive for public transit (p<0.001) were associated with commuting by public transit. Commuting distance (p<0.001) was negatively associated with active commuting. Having free or low cost recreation facilities around the worksite (p=0.04) and using bike facilities to lock bikes at the worksite (p<0.001) were associated with active commuting.

CONCLUSION: Both environment features and worksite supports and policies are associated with the choice of commuting mode. Future studies should use longitudinal designs to investigate the potential of promoting alternative commuting modes through worksite efforts that support sustainable commuting behaviors as well as the potential of built environment improvements.

How to promote professional competence and identity in social work students

Background: Field placement experiences are frequently cited in the literature as having most impact on a student social worker’s learning as they emerge into the profession. Placements are integral to the development of practice competence and in acquiring a sense of social work identity. However research on the effectiveness of educational strategies used to deliver learning and assess competence during placement are scarce. Internationally, pressures to meet increasing numbers of student enrolments have raised concerns about the potential impact on the quality of placements and practice teaching provided. These pressures may also impact on the appropriate transfer and application of learning to the student’s practice.
Aim: To identify learning activities rated most useful for developing professional practice competence and professional identity of social work students.
Method: Data were collected from 396 students who successfully completed their first or final placement during 2013-2014 and were registered at one of two Universities in Northern Ireland. Students completed a self-administered questionnaire which covered: placement setting and service user group; type of supervision model; frequency of undertaking specific learning activities; who provided the learning; which activities contributed to their developing professional competence and identity and their overall satisfaction.
Our findings confirmed the centrality of the supervisory relationship as the vehicle to enable quality student learning. Shadowing others, receiving regular supervision and receiving constructive feedback were the tasks that students reported as ‘most useful’ to developing professional identity, competence and readiness to practice. Disturbingly over 50% of students reported that linking practice to the professional codes, practice foci and key roles were not valued as ‘useful’ in terms of readiness to practice, feeling competent and developing professional social work identity. These results offer strong insights into how both the University and the practice placement environment needs to better prepare, assess and support students during practice placements in the field.

Corrosion Fatigue Behaviour of Laser-welded Shape Memory NiTi Wires in a Simulated Body Fluid

Corrosion fatigue is a fracture process as a consequence of synergistic interactions between the material structure, corrosive environment and cyclic loads/strains. It is difficult to be detected and can cause unexpected failure of engineering components in use. This study reveals a comparison of corrosion fatigue behaviour of laser-welded and bare NiTi wires using bending rotation fatigue (BRF) test coupled with a specifically-designed corrosion cell. The testing medium was Hanks’ solution (simulated body fluid) at 37.5 oC. Electrochemical impedance spectroscopic (EIS) measurement was carried out to monitor the change of corrosion resistance of sample during the BRF test at different periods of time. Experiments indicate that the laser-welded NiTi wire would be more susceptible to the corrosion fatigue attack than the bare NiTi wire. This study can serve as a benchmark for the product designers and engineers to understand the corrosion fatigue behaviour of the NiTi laser weld joint and determine the fatigue life safety factor for NiTi medical devices/implants involving laser welding in the fabrication process.

Acute care teaching in the undergraduate nursing curriculum

AIM: To incorporate basic aspects of acute care into the undergraduate nursing programme by providing an opportunity for the development of knowledge and skills in the early recognition and assessment of deteriorating patients on general hospital wards.
BACKGROUND: Acute care initiatives implemented in the hospital setting to improve the identification and management of 'at risk' patients have focused on the provision of education for trained or qualified staff. However, to ensure student nurses are 'fit to practice' at the point of registration, it has been recommended that acute care theory and skills are incorporated into the undergraduate nursing curriculum.
PRACTICE DEVELOPMENT INITIATIVE: An 'Integrated Nursing Care' module was incorporated into year 3 of the undergraduate nursing programme to introduce students to acute care theory and practice. Module content focuses on the early detection and management of acute deterioration in patients with respiratory, cardiac, neurological or renal insufficiencies. We used a competency-based framework to ensure the application of theory to practice through the use of group seminars. High-fidelity patient-simulated clinical scenarios were a key feature. The United Kingdom Resuscitation Council Intermediate Life Support course is also an important component of the module.
CONCLUSIONS: Incorporating the Integrated Nursing Care module into the undergraduate nursing curriculum provides pre-registration students the opportunity to develop their knowledge and skills in acute care.
RELEVANCE TO CLINICAL PRACTICE: The provision of undergraduate education in care of the acutely ill patient in hospital is essential to improve nurses' competence and confidence in assessing and managing deteriorating patients in general wards at the point of registration.